NHNadeem Hasan

Nadeem Hasan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Nadeem Hasan has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Role of baroclinic vorticity production on three-dimensional wake transition of a heated cylinder using a non-Boussinesq model

    by Mohd Perwez Ali, Nadeem Hasan, Sanjeev Sanghi

    This study examines the role of buoyancy-induced baroclinic vorticity production in the three-dimensional (3-D) wake transition behind an infinitely long heated square cylinder subjected to aiding and cross-flow buoyancy, using direct numerical simulation (DNS). A non-Oberbeck–Boussinesq (NOB) model is employed, requiring the solution of the full compressible Navier–Stokes equations to capture baroclinic effects under large-scale heating regimes. Simulations are carried out at a Reynolds number of italic Re equals 300 Re = 300 $\textit{Re} = 300$ and a low Mach number ( upper M equals 0.1 M = 0.1 $M = 0.1$ ) to minimise compressibility effects, with air (Prandtl number italic probability equals 0.71 Pr = 0.71 $\textit{Pr} = 0.71$ ) as the working fluid. Previous studies have demonstrated that baroclinic torque significantly enhances the strength of 3-D wake structures, thereby promoting an earlier onset of three-dimensionality compared with the unheated case. However, these effects have been predominantly investigated in cross-buoyancy configurations, and the underlying mechanisms remain insufficiently understood. In the present study, the contributions of streamwise and spanwise baroclinic torque are systematically analysed to elucidate the mechanisms governing flow instability and organisation in thermally influenced wakes. The findings reveal a complex interplay between baroclinic torque and buoyancy, indicating that increasing heating levels weaken the 3-D wake under aiding-buoyancy conditions while strengthening it in cross-buoyancy configurations. Furthermore, the production of spanwise baroclinic torque, whether aligned with or opposed to local vortices, increases flow complexity and influences vortex shedding intensity and vortex dislocations. It also governs the contrasting wake behaviour, resulting in a symmetric wake under aiding buoyancy and an asymmetric wake under cross-buoyancy.

  • Open Access

    Influence of thermal buoyancy on the wake dynamics of a heated square cylinder

    by Mohd Perwez Ali, Nadeem Hasan, Sanjeev Sanghi

    Direct numerical simulation of the three-dimensional (3-D) wake transition of a heated square cylinder subjected to horizontal cross-flow is performed in the presence of buoyancy. In order to capture the effects of large-scale heating, a non-Oberbeck–Boussinesq model is utilized, which includes the governing equations for compressible gas flow. All computations are performed at low free stream Mach number $M=0.1$ using air (free stream Prandtl number, $Pr=0.71$ ) as the working fluid. The 3-D instability modes A and B, which correspond to free stream Reynolds numbers of 180 and 250, are observed with longer and shorter spanwise wavelengths, respectively, and the onset of three-dimensionality is triggered at a Reynolds number of 173. In the presence of buoyancy, baroclinic vorticity production in the near-wake plays an important role for streamwise vorticity generation. The chaotic wake of the Mode-A instability bifurcates into periodic and quasiperiodic wakes at various heating levels, expressed by the overheat ratio, $\varepsilon =(T_w-T_\infty )/T_\infty$ , where $T_w$ and $T_\infty$ are the temperature of the cylinder surface and the ambient air, respectively. At low heating ( $\varepsilon =0.2$ ), the 3-D Mode-A instability is suppressed leading to a two-dimensional wake flow. Further increase in heating, again brings back the three-dimensionality in the wake through Mode-E instability. The variation of thermophysical properties and the effective Reynolds number with increase in heating level around the cylinder is examined. It is shown that the effect of thermophysical properties competes with the baroclinic streamwise vorticity generation at higher levels of heating ( $\varepsilon \geqslant 0.4$ ) to control the 3-D modes and wake dynamics.


  • Impact of free-stream orientation and thermal buoyancy on aerodynamic and heat transfer characteristics in mixed convective flow past an elliptical cylinder

    by Ashish Garg, Reyaz Arif, Nadeem Hasan

    This study conducts a thorough numerical investigation into the aerodynamic and heat transfer characteristics of mixed convective flow past an elliptical cylinder. Analysis is carried out for a constant Reynolds number (Re = 100), a Prandtl number (Pr = 0.71), and an angle of attack (λ=0°), utilizing the Oberbeck–Boussinesq approximation to solve mass, momentum, and energy equations via an in-house numerical solver. It explores a wide range of free-stream orientations, from 0° (upward flow aligned with gravity) to 90° (cross-flow). Additionally, Richardson number (Ri) is varied from forced convection (Ri = 0) to mixed convection regimes, up to Ri = 1.25. Two aspect ratios (AR=Major axis length/Minor axis length), specifically 2 and 4, are examined to assess their impact on flow behavior. The paper elucidates variations of lift coefficient, drag coefficient, and Nusselt number with Ri at different free-stream orientations. Furthermore, it investigates dynamics of both steady and unsteady flow regimes, correlating flow behavior with observed aerodynamic and heat transfer characteristics. Steady and unsteady periodic flow regimes are identified in the parametric space of (α, Ri) for AR = 2 and 4. The mean heat transfer rate increases with Ri in both steady and unsteady flow regimes at (α=0°, 30°, and 60°) for AR = 2 and 4, except at α=90°, where it decreases. These findings provide insights for designing compact heat exchangers utilizing elliptic tube cross-sections.


  • Effect of pulsatile flow on hydrodynamic characteristics of vortex induced vibration of square cylinder

    by Saif Masood, Mohammad Athar Khan, Syed Fahad Anwer, Nadeem Hasan, Rashid Ali


  • Open Access

    Three-dimensional wake transition of a heated square cylinder in the presence of cross-buoyancy

    by Mohd Perwez Ali, Nadeem Hasan, Sanjeev Sanghi

    The three-dimensional flow transition is examined in the wake of a heated square cylinder subjected to horizontal cross-flow perpendicular to gravity utilizing a direct numerical simulation approach. The surface of the square cylinder is heated uniformly to an elevated temperature Tw, and the amount of excess temperature is represented as the over-heat ratio ε=(Tw−T∞)/T∞, where T∞ represents the surrounding temperature. The effects of large-scale heating on the transport properties and thermal straining of the fluid particles are captured using an in-house non-Oberbeck–Boussinesq compressible model. The compressible flow governing equations (in a body-fitted coordinate system) are solved using a variant of flux-based particle velocity upwind-modified+ (PVU-M+) technique [Ahmad et al., “On the formation and sustenance of the compressible vortex rings in starting axisymmetric jets: A phenomenological approach,” Phys. Fluids 32, 126114 (2020)]. In this investigation, all computations are conducted at a low Mach number (Ma = 0.1) and air (Prandtl number, Pr = 0.71) is used as the working fluid. As the heating level rises, the shape and wavelength of the vortical structure undergo significant alterations. At Re = 250, the mode-B transition with a shorter spanwise wavelength and the mode-D transition with a longer wavelength are observed, respectively, for heating levels ε=0.0−0.2 and ε=0.8−1.0. Furthermore, for heating levels in the range 0.4≤ε≤0.6, an intermediate wavelength of the mode-E transition is detected. The temporal variation of fluid properties such as the force coefficient (CL, CD) and the Nusselt number (Nu) are shown at various heating levels. In addition, surface vorticity is examined in order to comprehend the flow dynamics near the surface of a heated square cylinder.


  • Open Access

    Analysis of Flow Structures and Global Parameters across a Heated Square Cylinder in Forced and Mixed Convection

    by Rashid Ali, Nadeem Hasan

    In the present study, numerical simulations are performed to identify the role of Reynolds number (Re), Richardson number (Ri) and free-stream orientations (α) on flow structures, aerodynamic parameters and heat transfer characteristics for the conditions (20 ≤ Re ≤ 120, 0° ≤ α ≤ 90° and 0 ≤ Ri ≤ 1.6). Prandtl number (Pr) and cylinder orientation (ϕ) are kept fixed at 0.71 and 0°. The Oberbeck–Boussinesq approximation is used to account for buoyancy effects. The governing equations of continuity, momentum and energy are discretized on a colocated body-fitted grid by employing a finite difference method. A viscous implicit pressure correction scheme is employed to advance the discrete solution in time. Contour maps of mean/steady drag coefficient and Nusselt number on (α-Ri) plane are plotted for 20 ≤ Re ≤ 120. From these contour maps, it is possible to identify the ranges of parameters (α, Ri) that can yield a relatively high mean/steady heat transfer rate accompanied by relatively low values of mean/steady drag coefficient. For [70° ≤ α ≤ 90°, 0 ≤ Ri ≤ 1.6], such a scenario is possible for any Re ∈ [20, 120]. The Strouhal number is observed to be maximum for Re = 120 at α = 45° and Ri = 1.2. Mean or steady coefficient of lift for any free-stream orientation (α ≠ 0°) is found to be highest at Re = 20 and Ri = 1.6. Sensitivity of (CD)Ri = 0.0 to α is observed to be minimum for Re = 20 and maximum for Re = 120. Sensitivity of the ratio CD(Ri,α)/CD(0,α) to Re is observed to be lower for unsteady flows than for steady flows, and it decreases with an increase in Re at a fixed value of Ri. Mean Nusselt number (Nu) in the forced flow regime increases significantly with an increase in Re at a fixed α. The Nusselt number is observed to be more sensitive to Ri for steady flows than for unsteady flows. The percentage increase in the ratio Nu(Ri,α)/Nu(0,α) for the entire range of Re is found to be 14.07%, 14.13%, 11.74% and 10.62% at α = 30°, 45°, 60° and 90°. At a fixed Ri, the Nusselt number ratio is found to decrease with an increase in Re for the entire range of α except for α = 90°. It is observed that the rate of heat transfer from the faces of the cylinder increases with an increase in Re for the entire ranges of α and Ri.

  • On the influence of co-flow on the shocks and vortex rings in the starting phases of under-expanded jets

    by Haroon Ahmad, Nadeem Hasan, Sanjeev Sanghi

    In the starting phases of continuously blowing under-expanded jets, this numerical study investigates the effect of co-flow (UaUj) (a) on the circulation and evolution of primary vortex ring (PVR) and (b) on the occurrence of Mach reflection, slipstream generation, and subsequent formation of counter rotating vortex rings (CRVRs). With increase in co-flow (UaUj), the PVR circulation gradually decreases. The size of supersonic PVR gradually decreases with increase in co-flow (UaUj), and at high magnitudes of co-flow (UaUj≳0.3), the supersonic PVR attains a circular shape. The strengths of embedded shock (ES) and vortex-induced shock are found to decrease with increase in co-flow (UaUj), and at high magnitudes of co-flow (UaUj≳0.3), these shocks may even cease to form inside the supersonic PVR. An increase in co-flow (UaUj) causes the expansion fan to become more and more narrow. This reduces the acceleration of the supersonic flow inside the inviscid core, thereby weakening the incident oblique shock (IOS), which in turn increases the pressure prevailing downstream of this shock inside the inviscid core. The increase in co-flow (UaUj) also leads to a simultaneous decrease in the pressures prevailing in front of the downstream marching PVR and Mach disk (MD) of the inviscid core due to the reduction in the strength of precursor shock. As the magnitudes of pressures prevailing in the upstream and downstream of Mach disk approach each other, hence, MD also weakens. This shows that with the increase in co-flow (UaUj), there is weakening of the different shocks (i.e., ES, IOS, and MD) involved in Mach reflection. This causes a reduction in the strength of the resulting slipstream, thereby affecting the formation of CRVR patterns.


  • Vortex shedding suppression of vibrating square cylinder in mixed convection regime

    by Mohammad Athar Khan, Syed Fahad Anwer, Saleem Anwar Khan, Nadeem Hasan

    In the present work, vortex shedding suppression of a vibrating square cylinder is numerically studied at Reynolds number, Re = 100, and Prandtl number, Pr = 7.1, in a mixed convection regime. Navier–Stokes equations with Boussinesq approximation are solved using a finite difference method by transforming it into a body-fitted coordinate system. The relationship between fluid flow and a vibrating square cylinder is captured using an Arbitrary Lagrangian Euler method. Numerical simulations are conducted for reduced velocities, Ured = 3–8 keeping the reduced mass (Mred) = 2 and damping coefficient, ξ′ = 0. The role of baroclinic vorticity is studied on the vortex shedding suppression for an elastically mounted free vibrating heated square cylinder. The critical Richardson number, Ric (Richardson number at which vortex shedding becomes suppressed) is determined by increasing the Richardson number (Ri) and observing the vortex shedding pattern. For every Ured = 3–8, a Ric is obtained. It is found that critical Richardson number (Ric) for the lock-in regime (Ured = 6) is 0.395 whereas for the initial branch (Ured = 3) and lower branch (Ured = 8) it is 0.17 and 0.18, respectively. Baroclinic vorticity generation for the lock-in regime, initial branch, and lower branch is also investigated comprehensively. The Ric for the initial and lower branch is close to Ric for the stationary cylinder. The Ric for the stationary cylinder (SC) is 0.165.


  • Effect of Wave Instabilities in Thermal and Solutal Mixing of Double-Diffusive Opposed Jets Impinging in a Passive-Mixer

    by Saleem A. Khan, Nadeem Hasan

    Two-dimensional (2D) numerical experiments are performed to investigate the flow instabilities and mixing of different nonisothermal counterflowing jets in a passive-mixer. The fluid is modeled as a binary mixture with thermal and solutal buoyancy effects considered through the Boussinesq approximation. The streams are arranged in a thermal and solutal buoyancy aiding configuration. Computations are carried out for three different ratios of the upper jet bulk velocity to the lower jet bulk velocity (VR), namely, VR = 0.5, 1.0, and 2. Within the parametric domain of RiT and RiC defined by region (RiT + RiC) ≤ 3, the instability causing transition from steady to unsteady flow regime is observed for VR = 1 and 2, while no transition is found to occur at VR = 0.5. Using Landau theory, it is established that the transition from steady to unsteady flow regime is a supercritical Hopf bifurcation. A complete regime map identifying the steady and unsteady flow regimes, within the parametric space of this study, is obtained by plotting the neutral curves of RiC and RiT (obtained using Landau theory) for different values of VR. Proper orthogonal decomposition (POD) analysis of the unsteady flows at VR = 1 establishes the presence of standing waves. However, for VR = 2, the presence of degenerate pairs in the POD eigenspectrum ascertains the presence of traveling waves in the unsteady flows. The standing wave unsteady flow mode is found to yield the highest rate of mixing.