Contaminants and their Levels of Retention in Extruded, Recycled Poly(Ethylene Terephthalate) from Curbside Collection. Part 1: Extraction Kinetics and Particle Size Effects
Authors:
Open Access
- 1 February 2006
- journal article
- research article
- Published by SAGE Publications in Progress in Rubber, Plastics and Recycling Technology
- Vol. 22 (1) , 1-21
Abstract
In the first phase of our studies of the contaminants and their levels in curbside-collected poly(ethylene terephthalate) (PET) subjected to a recycling process, we analysed the washed and dried, shredded PET (flake). Of the semi-volatile contaminants found, 26 were below the US FDA threshold of 215 ppb and six were above. Additionally, it was found that surface levels of contaminants far exceeded average concentrations in the bulk of the flake, raising questions about the appropriateness of sampling procedures. In this second phase (again using dichloromethane Soxhlet extractions for the most part), we examined contaminant levels after the flake was subjected to vacuum extrusion, to complete the recycling process. Initially amorphous, extruded pellets were annealed to introduce crystallinity and allow grinding, in order to examine the effect of particle size. Much reduced concentrations of contaminants were found (all 300-425 μm and >425-700 μm), approximately 8 h were required for the unground annealed pellets.Keywords
This publication has 7 references indexed in Scilit:
- Contaminants and levels of occurrence in washed and shredded poly(ethylene terephthalate) from curbside collection. II: Validation of extraction procedures, particle size sampling and crystallinityFood Additives & Contaminants, 2003
- Contaminants and levels of occurrence in washed and shredded poly(ethylene terephthalate) from curbside collection. Part 1: Extraction conditionsFood Additives & Contaminants, 2003
- Migration of residual contaminants from secondary recycled poly(ethylene terephthalate) into food‐simulating solvents, aqueous ethanol and heptaneFood Additives & Contaminants, 1997
- Critical ReviewAnalytical Extraction of Additives From PolymersThe Analyst, 1997
- Optimization of Experimental Parameters for the Determination of Polymer Additives using On-Line SFE--SFCJournal of Chromatographic Science, 1991
- The determination of light stabilisers in plastics by high-performance liquid chromatographyAnalytica Chimica Acta, 1983
- Determination of additives in polyethylene by absorption spectroscopyAnalytical Chemistry, 1960