JJJuhyeok Jang

Juhyeok Jang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Juhyeok Jang has a total of 233 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Overview of the KSTAR experiments and future plan

    by Yong Un Nam, H. Han, H.H. Lee, J. Chung, Y.M. Jeon, G.Y. Park, J. Kim, K. Kim, M. Kim, J. Ko, et al.

    The Korea Superconducting Tokamak Advanced Research (KSTAR) device has recently entered a new phase of operation following the installation of a tungsten mono-block divertor, providing a unique platform to investigate high-performance, long-pulse plasma scenarios for future reactors. The 2023–2024 experimental campaigns demonstrated significant progress in commissioning the tungsten divertor, developing plasma operation scenarios, and achieving real-time control. Comparative studies revealed increased core radiation losses and associated performance degradation relative to the carbon divertor environment. Alleviation strategies, such as optimized neutral beam injection timing, boron powder seeding, and impurity control through gas puffing, were shown to reduce tungsten accumulation and extend high-performance phases, including record H-mode operation exceeding 100 s. International collaboration enabled the first demonstration of high poloidal beta scenarios with an internal transport barrier on KSTAR. Advances in control included upgraded real-time resonant magnetic perturbation schemes and disruption forecasting via the DECAF system. Furthermore, divertor detachment control using a new surrogate-model-based approach with real-time radiation imaging demonstrated active impurity and heat flux management. Supported by enhanced heating, current drive, and diagnostic systems, these achievements offer valuable insights into tungsten impurity behavior, transport physics, and control strategies for future reactors including ITER. Planned upgrades toward a full-tungsten wall and ITER-aligned real-time plasma control will further establish KSTAR as a leading experimental platform for developing operational scenarios required to achieve steady-state, burning plasma conditions.


  • Top Cited Papers
    Open Access

    On FIRE mode in KSTAR

    by Yong-Su Na, Sangjin Park, Hyunsun Han, Janghyeok Lee, Chweeho ­hEo, Seulchan Hong, Choongki Sung, Donguk Kim, Jisung Kang, Youngho Lee, et al.

    We report a confinement regime newly developed for high-performance and steady-state operation in KSTAR. It is equipped with a stationary ion internal transport barrier resulting in the central ion temperature close to 10 keV sustained up to 50 s without delicate profile control and no notable impurity accumulation. As the novelty lies in a high portion of fast ions that stabilize core turbulence, this regime was coined as Fast Ion Regulated Enhancement (FIRE) mode. To obtain this regime, L-H transition was avoided by keeping low density with NBI with moderate power close to PLH in diverted configuration. The core characteristics of this scenario was investigated by power balance analyses and fluctuation measurements which revealed clear transport bifurcation. The edge region of FIRE mode sometimes shows the I-mode structure characterized with weakly coherent mode. Regarding MHD activities, sawtooth appears but thought to be stabilized in the high-performance phase. Fast ion driven Alfvenic eigenmodes (AEs) are also observed with high frequency of ~200 kHz. Another MHD activities with frequencies lower than those of fast ion driven AEs appear which have some impact on plasma performance. As the main origin of the core confinement enhancement, various fast ion effects are evaluated in terms of dilution effect, alpha stabilization effect, and resonant interactions of fast ions with turbulence through gyrokinetic analyses. The characteristics of FIRE mode are compared with other hot ion plasmas exhibiting similar properties such as supershot and hot ion mode. Predictive simulations of FIRE mode are conducted with integrated transport modelling employing the TGLF anomalous model, which confirms the fast ion effect. Remaining issues of FIRE mode for fusion reactors are discussed with emphasis on extension to a higher density regime. Predictive modelling shows a possibility of higher density operation in KSTAR.


  • Open Access

    Wall conditioning effects of boron powder injection in KSTAR with a tungsten divertor

    by Hanna Schamis, Erik P. Gilson, Hyungho Lee, Rajesh Maingi, SangKyeun Kim, Joseph A. Snipes, SeongMoo Yang, Alessandro Bortolon, Juhyeok Jang, Boseong Kim, et al.

    Boron powder dropped into KSTAR plasmas decreased the radiated power, core electron density, and Z eff , indicating that the ablated and redeposited boron powder helped to condition the plasma-facing surfaces. Visible line emission of oxygen and tungsten were also reduced by 50% (80%) with boron injection into H-mode (L-mode) discharges that used the new KSTAR tungsten monoblock lower divertor. Dynamic particle balance analysis found a negligible difference in the inferred wall pumping rate during the steady portion of the discharges. It is inferred that the observed conditioning effects were principally caused by a reduction in intrinsic impurities as opposed to a reduction in wall recycling. These results are in qualitative agreement with low-Z injected powder experiments across many fusion devices, confirming the utility of low-Z powder injection as a real-time wall conditioning tool.


  • Open Access

    Unified ELM suppression on KSTAR and DIII-D via adaptive feedback control strategies

    by R. Shousha, S.K. Kim, K.G. Erickson, S.H. Hahn, A.O. Nelson, N.C. Logan, S.M. Yang, Q.M. Hu, R. Wilcox, J.-K. Park, et al.

    This paper reports on the extension of our amplitude-based resonant magnetic perturbation (RMP) edge localized mode (ELM) controller to support phasing control (relative toroidal phases of RMP waveforms between rows of coils), multiple toroidal mode numbers, and new ‘jump’ and ‘probing’ strategies, all deployed on KSTAR and DIII-D. By treating the control algorithm as device-independent and adjusting only the real-time interfaces to sensors and power supplies, we have confirmed that the same finite state machine—based feedback logic can be ported between machines with minor modifications. In experiments using n = 2 RMPs on KSTAR and n = 3 on DIII-D, the controller successfully modulated RMP amplitudes in real time to sustain ELM suppression while minimizing confinement degradation. Phasing control broadened the suppression window, as it permitted the system to avoid locked-mode regions and safely access ELM-free conditions. A rotating RMP phasing scheme, integrated into the same framework, distributes divertor heat loads more uniformly, making it a promising strategy for protecting plasma-facing components during long discharges. New ‘jump’ and ‘probing’ techniques demonstrate the possibility for the controller to preempt imminent ELMs and refine the minimum required RMP amplitude without returning to ELMy conditions. Taken together, these upgrades enable extended ELM-free operation while mitigating confinement degradation, providing a practical framework for real-time ELM control in future high-performance tokamaks.


  • Conceptual design of multi-chord interferometer for the Versatile Experiment Spherical Torus (VEST)

    by Seong-Heon Seo, J Wang, Juhyeok Jang, C Sung, Y S Hwang

    Interferometers based on phase measurement technique have been widely used to measure the plasma line integrated density (LID) in the magnetic fusion devices. Phase jump is an inherent drawback of phase measurement techniques. Once a phase jump occurs, phase errors should be compensated for by referring the complementary diagnostics. In a multi-chord interferometer used to measure plasma density profiles, phase errors can be compensated for using the phase relationship between adjacent receivers. To utilize the phase relationship between receivers, microwaves emitted from a single transmitter are spatially distributed to all receivers. The total phase changes are tracked by spatially accumulating the phase differences between adjacent receivers. Since temporal accumulation of the phase changes is not required, phase measurement failure due to phase jumps does not affect subsequent measurements. In multi-chord interferometers, phase loss due to beam refraction is also a serious problem because the beams are incident on the plasma at oblique angles. The beams are refracted due to the plasma density gradient. In a multi-chord interferometer with a single distributed transmitter, the phase loss problem is automatically solved because some of the microwaves always enter the receivers via curved beam paths, but interpretation of the measurements is problematic because the actual beam paths differ from the straight paths in vacuum. An algorithm is developed to find the actual curved beam paths by iterating four procedures: reconstructing density profile using tomography from the previously estimated LID, ray tracing beam path in the reconstructed density profile, estimating LID with the ray traced beam path information from phase measurements, and averaging the estimated LID with the previous LID. In this paper, the principles of single transmitter multi-chord interferometry are demonstrated by analyzing synthetically generated data and the algorithm of iterative tomography is described in detail.

  • Open Access

    Observation of a stationary double transport barrier in KSTAR

    by M.W. Lee, S.-H. Hahn, D. Kim, J. Kang, W.H. Ko, J. Jang, W. Lee, C. Sung

    We have observed a stationary high confinement regime with a double transport barrier (DTB), including both internal and edge transport barriers (ITB and ETB) but without edge-localized modes (ELMs), in KSTAR. The ELM-free DTB phase has high thermal confinement comparable to typical H-mode operation in KSTAR. We investigated the characteristics of the DTB phase through various analyses. Transport analysis shows a reduction of ion heat diffusivity to near neoclassical level after the transition from the ELMy H-mode phase to the DTB phase. This result supports the formation of an ion ITB during the DTB phase. Furthermore, we observed that the DTB phase had an edge thermal transport barrier in the ion temperature profile, comparable to that of the H-mode, without a particle transport barrier at the edge. Peeling-ballooning stability analysis indicates that a lower pressure gradient due to density decrease in the DTB phase is mainly responsible for the ELM-free operation. Linear gyrokinetic analysis shows that the real frequency of the most unstable mode in the core region ( ρ tor = 0.32–0.47) is in the ion diamagnetic direction at both H-mode and DTB phases. At the DTB phase, the linear growth rate inside the ITB is reduced by 50% compared to the ITB foot, while the reduction is not shown at the H-mode phase. Further investigation including nonlinear effects will be needed to better understand the unique operation mode, which can contribute to applying the physical mechanism to fusion reactors in the future.


  • Open Access

    Criterion for long sustained highly peaked ion temperature in diverted configuration of KSTAR tokamak

    by H. Han, J. Chung, Y. M. Jeon, J. Kang, Y. S. Na, W. H. Ko, J. W. Juhn, J. Jeong, H. S. Kim, J. Jang, et al.

    In the context of KSTAR plasma research, the discovery of the fast ion regulated enhanced mode is noteworthy due to its remarkable ability to maintain ion temperatures exceeding up to 10 keV for a few tens of seconds, avoid impurity accumulation, and keep low loop voltages. This new plasma operating scenario is achieved in a diverted configuration plasma by avoiding the H-mode transitions with sufficient additional power for the transition. Keeping the density low is the primary method for the avoidance. Additionally, adjustments to other parameters (plasma shape, neutral beam injection, and toroidal magnetic field) associated with the H-mode threshold power are applied to inhibit the transition process. This paper includes an experimental analysis and discussion of these findings.


  • Calibration of toroidal visible bremsstrahlung diagnostics and reconstruction of effective charge profiles in Korea Superconducting Tokamak Advanced Research (KSTAR)

    by Juhyeok Jang, Dongcheol Seo, Jong-Ha Lee, Ha Jin Kim, Jekil Lee, Won-Ha Ko, Yong Un Nam

    The investigation of impurity behavior in fusion plasmas is a critical issue in fusion plasma research. The effective charge (Zeff) profile is a widely used measure of the impurity levels in fusion plasmas. In this study, the visible bremsstrahlung emissivity profile is reconstructed using toroidal visible bremsstrahlung (TVB) arrays at Korea Superconducting Tokamak Advanced Research (KSTAR). KSTAR TVB arrays have recently been developed and calibrated using a halogen light source and an integrating sphere. The reconstruction algorithm has been developed using the Phillips–Tikhonov method, and the reconstruction accuracy is assessed with test profiles. Electron density and temperature profiles from Thomson scattering diagnostics are fitted for Zeff calculations. Subsequently, the Zeff profiles in the edge localized mode suppression experiment are reconstructed. In addition, line-averaged Zeff values in the 2020 KSTAR campaign are presented, which are mostly distributed from two to four.


  • Open Access

    Gaussian process-based quasi-coherent noise suppression in magnetic confinement devices with superconductors

    by Jaewook Kim, Jayhyun Kim, Y.-C. Ghim, Juhyeok Jang

    Gaussian process (GP)-based technique suppressing quasi-coherent noises, i.e. structured noises, is developed which is more effective than conventional denoising techniques such as using frequency-domain filters. Superconducting devices like KSTAR, EAST, JT-60SA and ITER require separate sets of normal conducting magnetic coils inside the tokamak vacuum vessels to achieve a prompt control of fusion-grade plasmas in response to various fast and abrupt plasma activities such as vertical displacement events. Hence, these in-vessel control coils are typically operated with high-frequency switching power supplies which generate quasi-coherent noises. Semi-conductor based bolometers in KSTAR, for instance, are vulnerable to the quasi-coherent noise that makes a tomographic reconstruction for the 2D poloidal radiation map with the noise-contaminated signals flawed. By modeling the quasi-coherent properties of the noise as multivariate Gaussian distribution and generating the kernel function for the GP solely based on the measurements, the proposed method is able to suppress the noise whose performance is superior to the conventional filtering schemes. The method not only suggests an estimate of the denoised signal but also informs the consistent (with the measurements) uncertainty of the estimate at a level smaller than the standard deviation of the quasi-coherent noise. Performance of the method is confirmed with synthetic data containing the quasi-coherent noises, and it is applied to the measured data obtained by the KSTAR bolometers.


  • Open Access

    Bifurcation-like transition of divertor conditions induced by X-point radiation in KSTAR L-mode plasmas *

    by Jae-Sun Park, Richard Pitts, Juhyeok Jang, Yoon Seong Han, Wonho Choe, Jeremy Lore, Junghoo Hwang, Jun-Gyo Bak, June-Woo Juhn, Suk-Ho Hong

    Density ramps with ion grad B drift directed into lower single null KSTAR L-mode plasmas are associated with a simultaneous and abrupt reduction of the divertor particle flux on both low- and high-field-side targets when the mid-plane line averaged electron density reaches a given level. Target embedded Langmuir probe signals show a clear ‘cliff edge’ behavior similar to that observed in the divertor target electron temperature in DIII-D H-mode plasmas (Eldon et al 2017 Nucl. Fusion 57 066039; McLean et al 2015 J. Nucl. Mater. 463 533–6). The collapse of the particle flux is observed along the whole divertor target area (from private flux region to the far scrape-off layer (SOL)). The critical upstream density of this target flux cliff is invariant under fuel gas throughput modulation. The transition along the cliff occurs in tens of milliseconds. With the cliff, carbon impurities and deuterium neutrals transported through the X-point to the core produce a strong radiation spot near the X-point, seen on bolometric signals, and increase the upstream density. The experimental observations are consistent with time-dependent SOLPS-ITER simulations, which also demonstrate an abrupt transition of the target flux and upstream density with the increase in X-point radiation. The timescale of the cliff predicted by SOLPS-ITER is consistent with the experiment, although, it is influenced by gas throughput or time-dependent numerical methods. In the L-mode phase space of separatrix electron density and temperature, branches are divided based on target temperature, because the latter is strongly coupled to the radiation front and ionization front due to the monotonic characteristic of the parallel electron temperature distribution. Since the H-mode condition operates at a much higher upstream density and electron temperature in phase space, dissipation from sputtered carbon alone leads to the density limit before reaching the X-point radiation condition. This is therefore consistent with the fact that cliffs have never been observed in H-mode KSTAR experiments.