Won-Ha Ko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Won-Ha Ko has a total of 264 co-authors. Here are the top co-authors by number of shared publications:
- Sang-Hee Hahn
Korea Institute of Fusion Energy , Daejeon 34133
9 shared publications - Seong-Moo Yang
Princeton Plasma Physics Laboratory
9 shared publications - Sang-Kyeun Kim
Princeton Plasma Physics Laboratory
8 shared publications - Young Mu Jeon
Korea Institute of Fusion Energy
8 shared publications - Jekil Lee
Korea Institute of Fusion Energy
7 shared publications - Yong-Su Na
Department of Nuclear Engineering, Seoul National University 1 , Seoul 08826
7 shared publications
Latest Publications
- Open Access
- 25 June 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (11) , 116015
Overview of the KSTAR experiments and future plan
The Korea Superconducting Tokamak Advanced Research (KSTAR) device has recently entered a new phase of operation following the installation of a tungsten mono-block divertor, providing a unique platform to investigate high-performance, long-pulse plasma scenarios for future reactors. The 2023–2024 experimental campaigns demonstrated significant progress in commissioning the tungsten divertor, developing plasma operation scenarios, and achieving real-time control. Comparative studies revealed increased core radiation losses and associated performance degradation relative to the carbon divertor environment. Alleviation strategies, such as optimized neutral beam injection timing, boron powder seeding, and impurity control through gas puffing, were shown to reduce tungsten accumulation and extend high-performance phases, including record H-mode operation exceeding 100 s. International collaboration enabled the first demonstration of high poloidal beta scenarios with an internal transport barrier on KSTAR. Advances in control included upgraded real-time resonant magnetic perturbation schemes and disruption forecasting via the DECAF system. Furthermore, divertor detachment control using a new surrogate-model-based approach with real-time radiation imaging demonstrated active impurity and heat flux management. Supported by enhanced heating, current drive, and diagnostic systems, these achievements offer valuable insights into tungsten impurity behavior, transport physics, and control strategies for future reactors including ITER. Planned upgrades toward a full-tungsten wall and ITER-aligned real-time plasma control will further establish KSTAR as a leading experimental platform for developing operational scenarios required to achieve steady-state, burning plasma conditions.
- 25 June 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (11) , 116015
Open AccessOverview of the KSTAR experiments and future plan
The Korea Superconducting Tokamak Advanced Research (KSTAR) device has recently entered a new phase of operation following the installation of a tungsten mono-block divertor, providing a unique platform to investigate high-performance, long-pulse plasma scenarios for future reactors. The 2023–2024 experimental campaigns demonstrated significant progress in commissioning the tungsten divertor, developing plasma operation scenarios, and achieving real-time control. Comparative studies revealed increased core radiation losses and associated performance degradation relative to the carbon divertor environment. Alleviation strategies, such as optimized neutral beam injection timing, boron powder seeding, and impurity control through gas puffing, were shown to reduce tungsten accumulation and extend high-performance phases, including record H-mode operation exceeding 100 s. International collaboration enabled the first demonstration of high poloidal beta scenarios with an internal transport barrier on KSTAR. Advances in control included upgraded real-time resonant magnetic perturbation schemes and disruption forecasting via the DECAF system. Furthermore, divertor detachment control using a new surrogate-model-based approach with real-time radiation imaging demonstrated active impurity and heat flux management. Supported by enhanced heating, current drive, and diagnostic systems, these achievements offer valuable insights into tungsten impurity behavior, transport physics, and control strategies for future reactors including ITER. Planned upgrades toward a full-tungsten wall and ITER-aligned real-time plasma control will further establish KSTAR as a leading experimental platform for developing operational scenarios required to achieve steady-state, burning plasma conditions.
- Open Access
- 5 June 2026
- Published by Springer Nature in Research Square
Tiny selective perturbations control violent eruptions without stabilising fusion plasma
Systems driven far from equilibrium are often unstable and prone to violent bursts, from hurricanes and turbulent flows to fusion plasmas. Although stabilisation can mitigate such events, it often requires substantial energy and is not always practical. Yet guiding such systems into less destructive states without suppressing their underlying drive remains a central challenge in nonequilibrium science [1,2]. Tokamak fusion plasmas provide an important example because controlling energy release is essential for fusion power production [3, 4]. Their eruptions can impose heat loads exceeding 1 GW m -2 on reactor walls [5], yet can be suppressed by magnetic perturbations of order 0.1% of the confining field strength [6–8]. For over two decades, tokamak experiments have raised a specific question within this broader problem: can such minute perturbations change the macroscopic state without primarily reducing the drive? [8–10] Here, we show that a small spatially patterned magnetic perturbation drives state switching between violent eruptions and gradual dissipation in a fusion plasma. By coordinating the motion of interacting plasma structures, the perturbation strengthens nonlinear interaction and promotes transfer into broadband turbulence. We directly resolve this transfer pathway in a narrow spatial region, and nonlinear simulations reproduce the same structure while showing that the plasma remains unstable. These results support redistribution of energy release rather than simple stabilisation. More broadly, our results suggest a general control principle for far-from-equilibrium dynamics: rather than overpowering the instability, an appropriately structured perturbation can redirect energy release by synchronising interacting structures and strengthening their nonlinear interaction.
- 5 June 2026
- Published by Springer Nature in Research Square
Open AccessTiny selective perturbations control violent eruptions without stabilising fusion plasma
Systems driven far from equilibrium are often unstable and prone to violent bursts, from hurricanes and turbulent flows to fusion plasmas. Although stabilisation can mitigate such events, it often requires substantial energy and is not always practical. Yet guiding such systems into less destructive states without suppressing their underlying drive remains a central challenge in nonequilibrium science [1,2]. Tokamak fusion plasmas provide an important example because controlling energy release is essential for fusion power production [3, 4]. Their eruptions can impose heat loads exceeding 1 GW m -2 on reactor walls [5], yet can be suppressed by magnetic perturbations of order 0.1% of the confining field strength [6–8]. For over two decades, tokamak experiments have raised a specific question within this broader problem: can such minute perturbations change the macroscopic state without primarily reducing the drive? [8–10] Here, we show that a small spatially patterned magnetic perturbation drives state switching between violent eruptions and gradual dissipation in a fusion plasma. By coordinating the motion of interacting plasma structures, the perturbation strengthens nonlinear interaction and promotes transfer into broadband turbulence. We directly resolve this transfer pathway in a narrow spatial region, and nonlinear simulations reproduce the same structure while showing that the plasma remains unstable. These results support redistribution of energy release rather than simple stabilisation. More broadly, our results suggest a general control principle for far-from-equilibrium dynamics: rather than overpowering the instability, an appropriately structured perturbation can redirect energy release by synchronising interacting structures and strengthening their nonlinear interaction.
- Open Access
- 18 May 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (7) , 076019
Developing the hybrid scenario in DIII-D and KSTAR for W-compatible long-pulse operation
Long-pulse, high-performance operation with tungsten plasma-facing components is a crucial challenge for achieving steady-state goals in ITER and future fusion devices. This paper presents a joint international effort between the DIII-D and KSTAR tokamaks aimed at demonstrating the compatibility of the high q95~6 hybrid scenario with a tungsten divertor and superconducting coils. A DIII-D hybrid scenario recipe is successfully tailored to KSTAR’s operational constraints, which facilitates cross-device studies. The results show successful 30-second long-pulse operation in KSTAR at a normalized beta (~2.4) with a benign m/n=4/3 mode and effective mitigation of tungsten accumulation. Despite this success, the KSTAR scenario exhibits a greater than 25\% reduction in thermal confinement compared to the DIII-D reference. To investigate this discrepancy, we performed a predictive TGYRO validation study, which suggests that the difference is likely caused by a weaker temperature pedestal in the KSTAR discharge due to a higher and narrower density pedestal. In addition, such lower thermal confinement leads to higher impurity accumulation, possibly due to a change in neoclassical transport with increased inward pinch, which further degrades global confinement. We also report that stationary, long-pulse operation with sustained thermal confinement requires consistent fueling and wall conditioning. These findings highlight the importance of optimized fueling and real-time wall conditioning in achieving a high temperature pedestal and strong global confinement during stable long-pulse operation. We propose potential approaches toward fully steady-state, long-pulse operation, including real-time wall conditioning using an impurity dropper in KSTAR and future tokamaks.
- 18 May 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (7) , 076019
Open AccessDeveloping the hybrid scenario in DIII-D and KSTAR for W-compatible long-pulse operation
Long-pulse, high-performance operation with tungsten plasma-facing components is a crucial challenge for achieving steady-state goals in ITER and future fusion devices. This paper presents a joint international effort between the DIII-D and KSTAR tokamaks aimed at demonstrating the compatibility of the high q95~6 hybrid scenario with a tungsten divertor and superconducting coils. A DIII-D hybrid scenario recipe is successfully tailored to KSTAR’s operational constraints, which facilitates cross-device studies. The results show successful 30-second long-pulse operation in KSTAR at a normalized beta (~2.4) with a benign m/n=4/3 mode and effective mitigation of tungsten accumulation. Despite this success, the KSTAR scenario exhibits a greater than 25\% reduction in thermal confinement compared to the DIII-D reference. To investigate this discrepancy, we performed a predictive TGYRO validation study, which suggests that the difference is likely caused by a weaker temperature pedestal in the KSTAR discharge due to a higher and narrower density pedestal. In addition, such lower thermal confinement leads to higher impurity accumulation, possibly due to a change in neoclassical transport with increased inward pinch, which further degrades global confinement. We also report that stationary, long-pulse operation with sustained thermal confinement requires consistent fueling and wall conditioning. These findings highlight the importance of optimized fueling and real-time wall conditioning in achieving a high temperature pedestal and strong global confinement during stable long-pulse operation. We propose potential approaches toward fully steady-state, long-pulse operation, including real-time wall conditioning using an impurity dropper in KSTAR and future tokamaks.
- Open Access
- 10 March 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (4) , 045001
An overview of 3D field optimization for control of transport and edge instabilities on KSTAR
An international team from several laboratories and universities has made key advances over the last few years in the control of plasma transport and edge instabilities with applied 3D fields in the KSTAR tokamak to optimize long pulse operation scenarios. This overview begins with the optimization of both core and edge resonant magnetic perturbations (RMPs) to improve fast ion confinement to avoid excessive limiter heat loads due to fast ion losses and successful modeling of the experimental results. Integrated and advanced plasma control techniques with machine learning (ML) and adaptive control were then used to optimize the 3D field spectrum in real-time to control edge localized modes (ELMs) while avoiding core locked modes that could disrupt the plasma. Accelerating the offline model of 3D fields with a surrogate ML model can optimize ELM suppression in the edge while limiting the impact of the applied RMP fields deeper in the plasma core in real-time. In addition, the impact of the 3D fields on the divertor heat load has been modeled and compared with experimental measurements. An analysis of a multi-machine database including KSTAR has been performed to better understand the metrics for the observed RMP thresholds for ELM suppression and the resulting plasma performance. Predictive modeling of the operational space for ELM suppression and density pumpout due to RMP has shown the importance of magnetic islands in the plasma edge and their impact on plasma turbulence. This research has culminated in the development of successful long pulse operational scenarios on KSTAR while attempting to overcome challenges of the new tungsten divertor.
- 10 March 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (4) , 045001
Open AccessAn overview of 3D field optimization for control of transport and edge instabilities on KSTAR
An international team from several laboratories and universities has made key advances over the last few years in the control of plasma transport and edge instabilities with applied 3D fields in the KSTAR tokamak to optimize long pulse operation scenarios. This overview begins with the optimization of both core and edge resonant magnetic perturbations (RMPs) to improve fast ion confinement to avoid excessive limiter heat loads due to fast ion losses and successful modeling of the experimental results. Integrated and advanced plasma control techniques with machine learning (ML) and adaptive control were then used to optimize the 3D field spectrum in real-time to control edge localized modes (ELMs) while avoiding core locked modes that could disrupt the plasma. Accelerating the offline model of 3D fields with a surrogate ML model can optimize ELM suppression in the edge while limiting the impact of the applied RMP fields deeper in the plasma core in real-time. In addition, the impact of the 3D fields on the divertor heat load has been modeled and compared with experimental measurements. An analysis of a multi-machine database including KSTAR has been performed to better understand the metrics for the observed RMP thresholds for ELM suppression and the resulting plasma performance. Predictive modeling of the operational space for ELM suppression and density pumpout due to RMP has shown the importance of magnetic islands in the plasma edge and their impact on plasma turbulence. This research has culminated in the development of successful long pulse operational scenarios on KSTAR while attempting to overcome challenges of the new tungsten divertor.
- Top Cited PapersOpen Access
- 5 January 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (2)
On FIRE mode in KSTAR
We report a confinement regime newly developed for high-performance and steady-state operation in KSTAR. It is equipped with a stationary ion internal transport barrier resulting in the central ion temperature close to 10 keV sustained up to 50 s without delicate profile control and no notable impurity accumulation. As the novelty lies in a high portion of fast ions that stabilize core turbulence, this regime was coined as Fast Ion Regulated Enhancement (FIRE) mode. To obtain this regime, L-H transition was avoided by keeping low density with NBI with moderate power close to PLH in diverted configuration. The core characteristics of this scenario was investigated by power balance analyses and fluctuation measurements which revealed clear transport bifurcation. The edge region of FIRE mode sometimes shows the I-mode structure characterized with weakly coherent mode. Regarding MHD activities, sawtooth appears but thought to be stabilized in the high-performance phase. Fast ion driven Alfvenic eigenmodes (AEs) are also observed with high frequency of ~200 kHz. Another MHD activities with frequencies lower than those of fast ion driven AEs appear which have some impact on plasma performance. As the main origin of the core confinement enhancement, various fast ion effects are evaluated in terms of dilution effect, alpha stabilization effect, and resonant interactions of fast ions with turbulence through gyrokinetic analyses. The characteristics of FIRE mode are compared with other hot ion plasmas exhibiting similar properties such as supershot and hot ion mode. Predictive simulations of FIRE mode are conducted with integrated transport modelling employing the TGLF anomalous model, which confirms the fast ion effect. Remaining issues of FIRE mode for fusion reactors are discussed with emphasis on extension to a higher density regime. Predictive modelling shows a possibility of higher density operation in KSTAR.
- 5 January 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (2)
Top Cited PapersOpen AccessOn FIRE mode in KSTAR
We report a confinement regime newly developed for high-performance and steady-state operation in KSTAR. It is equipped with a stationary ion internal transport barrier resulting in the central ion temperature close to 10 keV sustained up to 50 s without delicate profile control and no notable impurity accumulation. As the novelty lies in a high portion of fast ions that stabilize core turbulence, this regime was coined as Fast Ion Regulated Enhancement (FIRE) mode. To obtain this regime, L-H transition was avoided by keeping low density with NBI with moderate power close to PLH in diverted configuration. The core characteristics of this scenario was investigated by power balance analyses and fluctuation measurements which revealed clear transport bifurcation. The edge region of FIRE mode sometimes shows the I-mode structure characterized with weakly coherent mode. Regarding MHD activities, sawtooth appears but thought to be stabilized in the high-performance phase. Fast ion driven Alfvenic eigenmodes (AEs) are also observed with high frequency of ~200 kHz. Another MHD activities with frequencies lower than those of fast ion driven AEs appear which have some impact on plasma performance. As the main origin of the core confinement enhancement, various fast ion effects are evaluated in terms of dilution effect, alpha stabilization effect, and resonant interactions of fast ions with turbulence through gyrokinetic analyses. The characteristics of FIRE mode are compared with other hot ion plasmas exhibiting similar properties such as supershot and hot ion mode. Predictive simulations of FIRE mode are conducted with integrated transport modelling employing the TGLF anomalous model, which confirms the fast ion effect. Remaining issues of FIRE mode for fusion reactors are discussed with emphasis on extension to a higher density regime. Predictive modelling shows a possibility of higher density operation in KSTAR.
- Open Access
- 13 November 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 222
Neural network-based analysis of charge exchange spectra in KSTAR
- 13 November 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 222
Open AccessNeural network-based analysis of charge exchange spectra in KSTAR
- Open Access
- 7 August 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (9) , 096008
Extending the operational boundaries of RMP-ELM suppression with optimized 3D field control
The use of 3D magnetic fields is one of the promising approaches to control edge localized modes (ELMs), and ITER has plans to utilize a flexible 3D coil set for ELM suppression using 3D fields. This study focuses on optimizing the 3D field spectrum to expand the operational window for n = 1 resonant magnetic perturbation (RMP) ELM suppression in KSTAR. The optimized n = 1 RMP effectively suppresses ELMs throughout the entire H-mode discharge, including the first ELM crash, while avoiding the onset of disruptive locked modes in low-density L-mode plasmas. The predicted suppression window aligns well with experimental data, highlighting the challenges and solutions of using n = 1 RMP at low densities. Moreover, the optimization successfully achieved n = 1 RMP ELM suppression for the first time in ITER-relevant q 95 and shaping conditions, including cases with q 95 as low as 3.6, as well as other q 95 and shape configurations. This highlights the importance and utility of 3D coil optimization while emphasizing the potential of long-wavelength low-n RMP, which will be valuable for ex-vessel coils designed to avoid complications of nuclear degradation.
- 7 August 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (9) , 096008
Open AccessExtending the operational boundaries of RMP-ELM suppression with optimized 3D field control
The use of 3D magnetic fields is one of the promising approaches to control edge localized modes (ELMs), and ITER has plans to utilize a flexible 3D coil set for ELM suppression using 3D fields. This study focuses on optimizing the 3D field spectrum to expand the operational window for n = 1 resonant magnetic perturbation (RMP) ELM suppression in KSTAR. The optimized n = 1 RMP effectively suppresses ELMs throughout the entire H-mode discharge, including the first ELM crash, while avoiding the onset of disruptive locked modes in low-density L-mode plasmas. The predicted suppression window aligns well with experimental data, highlighting the challenges and solutions of using n = 1 RMP at low densities. Moreover, the optimization successfully achieved n = 1 RMP ELM suppression for the first time in ITER-relevant q 95 and shaping conditions, including cases with q 95 as low as 3.6, as well as other q 95 and shape configurations. This highlights the importance and utility of 3D coil optimization while emphasizing the potential of long-wavelength low-n RMP, which will be valuable for ex-vessel coils designed to avoid complications of nuclear degradation.
- Open Access
- 17 July 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (8) , 086021
Unified ELM suppression on KSTAR and DIII-D via adaptive feedback control strategies
This paper reports on the extension of our amplitude-based resonant magnetic perturbation (RMP) edge localized mode (ELM) controller to support phasing control (relative toroidal phases of RMP waveforms between rows of coils), multiple toroidal mode numbers, and new ‘jump’ and ‘probing’ strategies, all deployed on KSTAR and DIII-D. By treating the control algorithm as device-independent and adjusting only the real-time interfaces to sensors and power supplies, we have confirmed that the same finite state machine—based feedback logic can be ported between machines with minor modifications. In experiments using n = 2 RMPs on KSTAR and n = 3 on DIII-D, the controller successfully modulated RMP amplitudes in real time to sustain ELM suppression while minimizing confinement degradation. Phasing control broadened the suppression window, as it permitted the system to avoid locked-mode regions and safely access ELM-free conditions. A rotating RMP phasing scheme, integrated into the same framework, distributes divertor heat loads more uniformly, making it a promising strategy for protecting plasma-facing components during long discharges. New ‘jump’ and ‘probing’ techniques demonstrate the possibility for the controller to preempt imminent ELMs and refine the minimum required RMP amplitude without returning to ELMy conditions. Taken together, these upgrades enable extended ELM-free operation while mitigating confinement degradation, providing a practical framework for real-time ELM control in future high-performance tokamaks.
- 17 July 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (8) , 086021
Open AccessUnified ELM suppression on KSTAR and DIII-D via adaptive feedback control strategies
This paper reports on the extension of our amplitude-based resonant magnetic perturbation (RMP) edge localized mode (ELM) controller to support phasing control (relative toroidal phases of RMP waveforms between rows of coils), multiple toroidal mode numbers, and new ‘jump’ and ‘probing’ strategies, all deployed on KSTAR and DIII-D. By treating the control algorithm as device-independent and adjusting only the real-time interfaces to sensors and power supplies, we have confirmed that the same finite state machine—based feedback logic can be ported between machines with minor modifications. In experiments using n = 2 RMPs on KSTAR and n = 3 on DIII-D, the controller successfully modulated RMP amplitudes in real time to sustain ELM suppression while minimizing confinement degradation. Phasing control broadened the suppression window, as it permitted the system to avoid locked-mode regions and safely access ELM-free conditions. A rotating RMP phasing scheme, integrated into the same framework, distributes divertor heat loads more uniformly, making it a promising strategy for protecting plasma-facing components during long discharges. New ‘jump’ and ‘probing’ techniques demonstrate the possibility for the controller to preempt imminent ELMs and refine the minimum required RMP amplitude without returning to ELMy conditions. Taken together, these upgrades enable extended ELM-free operation while mitigating confinement degradation, providing a practical framework for real-time ELM control in future high-performance tokamaks.
- Open Access
- 10 September 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (10) , 106052
Kinetic profile inference with outlier detection using support vector machine regression and Gaussian process regression
We propose an outlier-resilient Gaussian process regression (GPR) model supported by support vector machine regression (SVMR) for kinetic profile inference. GPR, being a non-parametric regression using Bayesian statistics, has advantages in that it imposes no constraints on profile shapes and can be readily used to integrate different kinds of diagnostics, while it is vulnerable to the presence of even a single outlier among a measured dataset. As an outlier classifier, an optimized SVMR is developed based only on the measurements. Hyper-parameters of the developed GPR model with informative prior distributions are treated in two different ways, i.e. maximum a posteriori (MAP) estimator and marginalization using a Markov Chain Monte Carlo sampler. Our SVMR-supported GPR model is applied to infer ion temperature Ti profiles using measured data from the KSTAR charge exchange spectroscopy system. The GPR-inferred Ti profiles with and without an outlier are compared and show prominent improvement when the outlier is removed by the SVMR. Ti profiles inferred with the MAP estimator and the marginalization scheme are compared. They are noticeably different when observation uncertainties are not small enough, and the marginalization scheme generally provides a smoother profile.
- 10 September 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (10) , 106052
Open AccessKinetic profile inference with outlier detection using support vector machine regression and Gaussian process regression
We propose an outlier-resilient Gaussian process regression (GPR) model supported by support vector machine regression (SVMR) for kinetic profile inference. GPR, being a non-parametric regression using Bayesian statistics, has advantages in that it imposes no constraints on profile shapes and can be readily used to integrate different kinds of diagnostics, while it is vulnerable to the presence of even a single outlier among a measured dataset. As an outlier classifier, an optimized SVMR is developed based only on the measurements. Hyper-parameters of the developed GPR model with informative prior distributions are treated in two different ways, i.e. maximum a posteriori (MAP) estimator and marginalization using a Markov Chain Monte Carlo sampler. Our SVMR-supported GPR model is applied to infer ion temperature Ti profiles using measured data from the KSTAR charge exchange spectroscopy system. The GPR-inferred Ti profiles with and without an outlier are compared and show prominent improvement when the outlier is removed by the SVMR. Ti profiles inferred with the MAP estimator and the marginalization scheme are compared. They are noticeably different when observation uncertainties are not small enough, and the marginalization scheme generally provides a smoother profile.
- Open Access
- 23 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (11) , 112010
Overview of the KSTAR experiments toward fusion reactor
The Korean Superconducting Tokamak Advanced Research has been focused on exploring the key physics and engineering issues for future fusion reactors by demonstrating the long pulse operation of high beta steady-state discharge. Advanced scenarios are being developed with the goal for steady-state operation, and significant progress has been made in high ℓ i, hybrid and high beta scenarios with β N of 3. In the new operation scenario called fast ion regulated enhanced (FIRE), fast ions play an essential role in confinement enhancement. GK simulations show a significant reduction of the thermal energy flux when the thermal ion fraction decreases and the main ion density gradient is reversed by the fast ions in FIRE mode. Optimization of 3D magnetic field techniques, including adaptive control and real-time machine learning control algorithm, enabled long-pulse operation and high-performance ELM-suppressed discharge. Symmetric multiple shattered pellet injections (SPIs) and real-time disruption event characterization and forecasting are being performed to mitigate and avoid the disruptions associated with high-performance, long-pulse ITER-like scenarios. Finally, the near-term research plan will be addressed with the actively cooled tungsten divertor, a major upgrade of the NBI and helicon current drive heating, and transition to a full metallic wall.
- 23 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (11) , 112010
Open AccessOverview of the KSTAR experiments toward fusion reactor
The Korean Superconducting Tokamak Advanced Research has been focused on exploring the key physics and engineering issues for future fusion reactors by demonstrating the long pulse operation of high beta steady-state discharge. Advanced scenarios are being developed with the goal for steady-state operation, and significant progress has been made in high ℓ i, hybrid and high beta scenarios with β N of 3. In the new operation scenario called fast ion regulated enhanced (FIRE), fast ions play an essential role in confinement enhancement. GK simulations show a significant reduction of the thermal energy flux when the thermal ion fraction decreases and the main ion density gradient is reversed by the fast ions in FIRE mode. Optimization of 3D magnetic field techniques, including adaptive control and real-time machine learning control algorithm, enabled long-pulse operation and high-performance ELM-suppressed discharge. Symmetric multiple shattered pellet injections (SPIs) and real-time disruption event characterization and forecasting are being performed to mitigate and avoid the disruptions associated with high-performance, long-pulse ITER-like scenarios. Finally, the near-term research plan will be addressed with the actively cooled tungsten divertor, a major upgrade of the NBI and helicon current drive heating, and transition to a full metallic wall.