TJThomas R. Jones

Thomas R. Jones

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Thomas R. Jones has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Integrated Superconducting High-$Q$ Seamless Cavity for Quantum Memory and Qubit Readout Applications

    by Mohamed Fouad Hagag, Kareem H. El-Gendy, Bashar A. Zyoud, Thomas R. Jones, Karim G. Seddik, Dimitrios Peroulis

  • Open Access

    Ultra-Wideband Silicon Plasma Switches

    by Alden Fisher, Thomas R. Jones, Dimitrios Peroulis

    The design, optimization, and characterization of an ultra-wideband solid-state plasma shunt switch with state-of-the-art performance is presented, achieving up to 5× reduction in dc power consumption, 4× faster switching speeds, and 2× smaller footprint compared to prior work. The switch is realized by patterning a coplanar waveguide transmission line on a high-resistivity silicon substrate and illuminating the gaps with up to three fibers, creating a highly efficient shunt switch. For efficient power consumption, multiple bias fibers are incorporated to distribute the light avoiding photoconductive saturation. Furthermore, to enhance agility, silicon micromachining is employed, achieving single-digit microsecond switching times under 2.75 µs, the fastest ever recorded for this technology. The result is an ultra-wideband dc-110+ GHz shunt switch with less than 0.81 dB insertion loss and up to 71 dB isolation. This is accomplished with a straightforward manufacturing process in a compact footprint of less than 0.057 mm$^{2}$, paving the way for seamless technology integration. Lastly, highly accurate wideband co-simulations for solid-state plasma modeling are discussed and validated against measurements, underscoring the superior performance and reliability of this disruptive technology.


  • Open Access

    Continuously Reconfigurable and High-Efficiency 70 W Power Amplifiers for 1–5 GHz

    by Garrett Shaffer, W. Joel D. Johnson, Thomas R. Jones, Abbas Semnani, Dimitrios Peroulis

    Two continuously reconfigurable and high-efficiency 1–5 GHz, 70 W, Class AB power amplifiers (PAs) are introduced and experimentally investigated in this article. Both designs use gallium nitride (GaN) high electron mobility transistors (HEMTs) and coupled high quality factor (high-Q) evanescent-mode (EVA) cavity resonators for their output matching networks (OMNs). The first design is partially reconfigurable, with a traditional static input matching network (IMN), while the second design is fully reconfigurable, using a single high-Q EVA cavity resonator for its IMN. Each cavity has a piezoelectric bending actuator to independently change its resonant frequency. Both reconfigurable matching network designs provide optimal impedances to the transistor over a wider range of frequencies than traditional matching networks, significantly outperforming static matching amplifier designs and achieving state-of-the-art performance. Large signal gain is above 10 dB for the entire frequency range at the maximum output power of 48.5 dBm. The drain efficiency of the partially reconfigurable design peaks at 74% and is above 50% from 1 to 4 GHz, dropping to 30% by 5 GHz. In the fully reconfigurable design, the drain efficiency peaks at 75% and stays above 50% for the entirety of the 1–5 GHz range. Compared to existing technologies, this performance exhibits a broader frequency range and higher output power, while maintaining similar percentages for drain efficiency.


  • Sub-THz Photoconductive Evanescent-Mode Waveguide SPST Switch

    by Thomas R. Jones, Dimitrios Peroulis

    This letter presents the first measured results of sub-THz photoconductive evanescent-mode (EVA) waveguide single-pole single-throw (SPST) switches operating in the G-band. Both second-and third-order devices are designed, fabricated, and measured, resulting in low insertion losses (ILs) of $<$ 0.4 dB and electronically tunable isolation reaching $>$ 50 dB while requiring low optical powers. An analysis of the solid-state plasma (SSP) physics reveals the viable potential for switching at frequencies above 800 GHz, emphasizing the promising capabilities of this enabling platform technology for future 5G/6G communication and radar sub-THz applications.


  • Design and Characterization of W-Band Silicon Micromachined High-Power and High-Speed Photoconductive Evanescent-Mode Waveguide Single and Double Throw Switches

    by Eric T. Der, Thomas R. Jones, Alden Fisher, Kambiz Moez, Douglas W. Barlage, Dimitrios Peroulis

    This article details the principle of operation, design process, and characterization of $W$ -band silicon micromachined evanescent-mode (EVA) waveguide switches. This work includes a detailed analysis of the on-state response of EVA waveguide switches as well as the design of transitions to standard waveguide connector feeds. The first ever switching speed and power handling characterization of silicon micromachined EVA waveguide switches is also presented. Photogenerated plasma in silicon posts placed inside an EVA channel results in large impedance mismatch, allowing very high isolation to be achieved in the switch’s off-state with low optical power. In the on-state, the unexcited silicon posts behave as shunt capacitors, allowing signal propagation through the switch in the form of a coupled resonator bandpass filter response. The design of both two-pole and three-pole filter responses in single pole single throw (SPST) and single pole double throw (SPDT) switch configurations is detailed in this article. The fabricated two-pole SPST switch achieves a 30-dB isolation with just 178 mW of optical excitation. For the three-pole SPST switch, only 111 mW is required. The extracted insertion loss (IL) of the two-pole and three-pole switching elements in SPDT configurations is just 0.16 and 0.32 dB, respectively. Furthermore, experiments presented in this article show that $<$ 4- $\mu$ s switching speeds are realized by this technology, and that the switching elements are able to handle at least +32 dBm of continuous power at 85 GHz.


  • Open Access

    Resonant Impedance Tuners: Theory, Design, Power Handling, and Repeatability

    by Garrett Shaffer, W. Joel D. Johnson, Thomas R. Jones, Abbas Semnani, Dimitrios Peroulis

    The theory of coupled-resonator-based impedance tuners is presented for the first time, establishing coverage limitations for two-and three-resonator designs. Besides the advantages of resonant impedance tuners, practical considerations including resonator loss and limited tuning range are included in the analysis. From this theoretical background, a rigorous design procedure is presented for creating optimal resonant impedance tuners, designed for maximum Smith chart coverage, for both the two-and three-pole structures. A proof-of-concept three-pole impedance tuner is created following this procedure. This state-of-the-art tuner achieves at least 90% Smith chart coverage from 4 to 8 GHz while maintaining minimum transducer losses of 0.4 dB. The designed tuner is implemented on printed circuit board (PCB) technology and uses electronically controllable linear actuators for tuning. With these design choices, a repeatability of 48 dB is achieved, while maintaining tuning times of less than 100 ms, and is capable of operating at 100 W. This represents performance competitive with the highest repeatability tuners available today. Moreover, it simultaneously achieves $\bm{10\times}$ faster response time and $\bm{> \!\! 10\times}$ smaller footprint than state-of-the-art highly repeatable tuners.


  • A W-Band SPDT Photoconductive Evanescent-Mode Waveguide Switch

    by Eric T. Der, Thomas R. Jones, Alden Fisher, Michael D. Sinanis, Kambiz Moez, Douglas W. Barlage, Dimitrios Peroulis

    This letter presents the design, fabrication, and measurement of a silicon micromachined photoconductive evanescent (EVA)-mode waveguide switch operating in a single-pole double-throw (SPDT) configuration. Two EVA-mode waveguides loaded with silicon posts are placed in a Y configuration with a common feeding waveguide. In the absence of photoexcitation, the dielectric posts and EVA channel exhibit a bandpass filter response that allows low-loss propagation of signals on the order of 2.0 dB at 96.7 GHz. When photoexcited, the low conductive posts and EVA channel yield a very high isolation of 36.5 dB up to 102.4 GHz within $W$ -band. The proposed design shows promise for 5G and 6G communication backhaul devices.


  • Experimental Investigation of a Photogenerated Silicon Plasma Monopole Antenna

    by Thomas R. Jones, Alden Fisher, Dimitrios Peroulis

    This work investigates the photoconductive effect in high resistivity silicon as the radiating element of a plasma monopole antenna. A silicon chiplet forming the monopole is mounted on top of an antenna feed network patterned on a printed circuit board substrate. By exciting the silicon chiplet with a light source supplied by optical fibers, the monopole can be changed from a dielectric to a conductor, thus making the antenna indistinguishable from typical substrates in the OFF-state and radiating in its ON-state, respectively. The experimental results show a peak broadside realized gain of -2.6 dBi at 16.9 GHz, and an ON/OFF ratio greater than 17.8 dB from 14.2 to 20 GHz. The silicon plasma antenna is also shown to radiate between 43 to 62% of the broadside power in comparison to a fully-copper monopole antenna with equivalent dimensions. The proposed photogenerated silicon plasma monopole antenna demonstrates significant potential as an antenna element for integration within a plasma antenna array system.


  • Open Access

    High-Q High Power Tunable Filters Manufactured With Injection Molding Technology

    by Michael D. Sinanis, Pintu Adhikari, Thomas R. Jones, Mahmoud Abdelfattah, Dimitrios Peroulis

    This paper presents the first demonstration of injection molding technology to enable large-scale mass manufacturing of high-performance tunable microwave filters to meet the growing needs of 5G small cell stations. This is the first time that a tunable filter satisfies all four of the following requirements simultaneously: low manufacturing cost, high quality factor, wide tuning range, and high power handling. Exhaustive research exists on the use of polymers for 3D microwave device manufacturing; nonetheless, mass-production technologies, such as injection molding, can provide low costs without compromising performance. The proposed bandpass filter implementation uses a tunable evanescent-mode cavity resonator injection molded with an acrylonitrile-butadiene-styrene thermoplastic polymer. In addition, changing the critical gap size over the resonator’s post using a commercial microactuator provides frequency tuning. The measured filter achieves an 86% tuning range from 2.8 - 5.2 GHz with a state-of-the-art measured unloaded quality factor Qu of 1548 - 2573. The filter has a measured insertion loss of 0.06 -0.1 dB with a fractional bandwidth from 7.6 -8.4% across the entire tuning range. Moreover, for the first time in this manufacturing technology implementation, a bandpass filter is demonstrated with power handling capabilities beyond 100 W. The manufactured device demonstrates the significant potential of this technology for the scale-up manufacturing of reconfigurable high-Q RF filters without compromising the performance.


  • A Photogenerated Silicon Plasma Waveguide Switch and Variable Attenuator for Millimeter-Wave Applications

    by Thomas R. Jones, Alden Fisher, Douglas W. Barlage, Dimitrios Peroulis

    This article reports the design, fabrication, and measurement of a millimeter-wave (mm-wave) solid-state $\pi $ -match waveguide switch using bulk silicon micromachining. A photogenerated plasma within a silicon post is utilized as the switching element within the waveguide channel. Not only does this isolate the switch bias network from the RF signal path but also allows for tuning of the OFF-state isolation with increasing optical power for application as a variable attenuator. A measured OFF-state isolation greater than 25 dB up to 40 GHz is reported, with a measured extracted ON-state insertion loss of 0.52 dB at 35 GHz, and less than 0.88 dB across the entire band from 30 to 40 GHz. The proposed switch illustrates the significant potential for photogenerated silicon plasma switching of high-performance bulk micromachined mm-wave waveguides.