AFAlden Fisher

Alden Fisher

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alden Fisher has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ultra-Wideband Silicon Plasma Switches

    by Alden Fisher, Thomas R. Jones, Dimitrios Peroulis

    The design, optimization, and characterization of an ultra-wideband solid-state plasma shunt switch with state-of-the-art performance is presented, achieving up to 5× reduction in dc power consumption, 4× faster switching speeds, and 2× smaller footprint compared to prior work. The switch is realized by patterning a coplanar waveguide transmission line on a high-resistivity silicon substrate and illuminating the gaps with up to three fibers, creating a highly efficient shunt switch. For efficient power consumption, multiple bias fibers are incorporated to distribute the light avoiding photoconductive saturation. Furthermore, to enhance agility, silicon micromachining is employed, achieving single-digit microsecond switching times under 2.75 µs, the fastest ever recorded for this technology. The result is an ultra-wideband dc-110+ GHz shunt switch with less than 0.81 dB insertion loss and up to 71 dB isolation. This is accomplished with a straightforward manufacturing process in a compact footprint of less than 0.057 mm$^{2}$, paving the way for seamless technology integration. Lastly, highly accurate wideband co-simulations for solid-state plasma modeling are discussed and validated against measurements, underscoring the superior performance and reliability of this disruptive technology.


  • Design and Characterization of W-Band Silicon Micromachined High-Power and High-Speed Photoconductive Evanescent-Mode Waveguide Single and Double Throw Switches

    by Eric T. Der, Thomas R. Jones, Alden Fisher, Kambiz Moez, Douglas W. Barlage, Dimitrios Peroulis

    This article details the principle of operation, design process, and characterization of $W$ -band silicon micromachined evanescent-mode (EVA) waveguide switches. This work includes a detailed analysis of the on-state response of EVA waveguide switches as well as the design of transitions to standard waveguide connector feeds. The first ever switching speed and power handling characterization of silicon micromachined EVA waveguide switches is also presented. Photogenerated plasma in silicon posts placed inside an EVA channel results in large impedance mismatch, allowing very high isolation to be achieved in the switch’s off-state with low optical power. In the on-state, the unexcited silicon posts behave as shunt capacitors, allowing signal propagation through the switch in the form of a coupled resonator bandpass filter response. The design of both two-pole and three-pole filter responses in single pole single throw (SPST) and single pole double throw (SPDT) switch configurations is detailed in this article. The fabricated two-pole SPST switch achieves a 30-dB isolation with just 178 mW of optical excitation. For the three-pole SPST switch, only 111 mW is required. The extracted insertion loss (IL) of the two-pole and three-pole switching elements in SPDT configurations is just 0.16 and 0.32 dB, respectively. Furthermore, experiments presented in this article show that $<$ 4- $\mu$ s switching speeds are realized by this technology, and that the switching elements are able to handle at least +32 dBm of continuous power at 85 GHz.


  • Design and Optimization of a High-Power Solid-State Plasma RF Switch

    by Alden Fisher, Thomas R. Jones, Dimitrios Peroulis

    This article shows the highest power handling and fastest switching speed of any previously reported compact solid-state plasma (SSP) switch. These improvements are made possible by thoroughly investigating the design trade-offs, allowing essential performance metrics such as loss and isolation to be maintained. In doing so, two different designs are considered to investigate the trade-off between loss and switching speed up through the $S$ -band, showing an order of magnitude faster switching speed at the cost of 0.15 dB loss. The modified conventional design exhibits less than 0.35 dB loss and 29.44 $\mu$ s switching speeds, whereas the novel design employing micromachining shows less than 0.50 dB loss and 3.50 $\mu$ s switching speeds, with a rise time of 400 ns. Both designs can handle at least 100 W of RF power without degradation in loss or isolation. Further, hot-switching in this technology is reported for the first time, surviving up to 30 W. Comprehensive design equations are presented and implemented in co-simulation, showing an almost-indistinguishable difference from measured data. The theory is expanded to include equations predicting switching speed, power handling, and equivalent plasma resistance.


  • EVAding Interference: A Hybrid Architecture Approach for Substrate-Integrated Evanescent-Mode Cavity Filters

    by Alden Fisher, Michael D. Sinanis, Mohammad Abu Khater, Dimitrios Peroulis

    In today’s crowded RF spectrum, receivers must be highly selective to mitigate any interference, whether intentional or from adjacent channels. The upper part of the C band (4–8 GHz) has been designated for space-to-Earth satellite communications and space exploration [1] . This long-range communication demands sensitive, low-loss receivers that can recover weak signals. Customarily, a tradeoff between size and performance presents itself, which poses a challenge to the microwave community as size is often critical in satellite payloads. Therefore, a compact, radiation-impervious filtering solution is needed.


  • A W-Band SPDT Photoconductive Evanescent-Mode Waveguide Switch

    by Eric T. Der, Thomas R. Jones, Alden Fisher, Michael D. Sinanis, Kambiz Moez, Douglas W. Barlage, Dimitrios Peroulis

    This letter presents the design, fabrication, and measurement of a silicon micromachined photoconductive evanescent (EVA)-mode waveguide switch operating in a single-pole double-throw (SPDT) configuration. Two EVA-mode waveguides loaded with silicon posts are placed in a Y configuration with a common feeding waveguide. In the absence of photoexcitation, the dielectric posts and EVA channel exhibit a bandpass filter response that allows low-loss propagation of signals on the order of 2.0 dB at 96.7 GHz. When photoexcited, the low conductive posts and EVA channel yield a very high isolation of 36.5 dB up to 102.4 GHz within $W$ -band. The proposed design shows promise for 5G and 6G communication backhaul devices.


  • Steady-State Thermal Analysis on a Real-Time Plasma Impedance Tuner for High-Power RF Matching Applications

    by Justin Roessler, Alden Fisher, Austin Egbert, Trevor Van Hoosier, Charles Baylis, Dimitrios Peroulis, Robert Marks

    With fifth generation (5G) wireless spectrum reallocation presenting an increasingly congested spectral environment, radar systems need to utilize the advantages of real-time high-power impedance tuners to reconfigure in real time for maximization of output power and detection range. The ability to analyze a low-loss plasma switched-network impedance tuner, previously demonstrated for high-power capability, is further developed for analysis of thermal failure. The goal is both to understand the thermal properties and limitations of the radio-frequency (RF) board of the tuner under impedance tuning conditions and to assess the thermal power handling capabilities of the tuner structure. Based on thermal failure, an approach for assessing power-handling capability is demonstrated using CST's 3-D Multiphysics solver for Electromagnetic (EM)-Thermal Coupled simulations. The EM simulator analyzes the current density across the structure and translates this current density into temperature through the electrothermal model. The thermal analysis shows at least 51.1 W of power handling over all tuner states and frequencies, given failure by solder reflow at 91.5°C. The results of this paper provide a framework for analysis of tuner thermal failure and assessment of power handling.

  • A Plasma-Switch Impedance Tuner With Microsecond Reconfiguration

    by Justin Roessler, Alden Fisher, Austin Egbert, Zach Vander Missen, Trevor Van Hoosier, Charles Baylis, Mohammad Abu Khater, Dimitrios Peroulis, Robert J. Marks

    With many frequency bands previously allocated solely for radar now being reallocated for sharing, radar transmitters must be frequency-agile, able to quickly change operating frequency while maintaining detection range. This article details the design of a 2–4-GHz reconfigurable impedance tuner using 35-W plasma switches. The tuner consists of switched shunt capacitor and inductor branches loading a series microstrip line. For many RF matching applications, a reconfigurable impedance tuner must have a broad tuning bandwidth, real-time switching speeds, high power handling, low loss, and broad Smith chart coverage. The implementation of the tuner using semiconductor plasma switches illuminated by laser diodes is described. The tuner is demonstrated in measurements using a custom search algorithm, adjusting and optimizing the tuner settings to provide maximum output power in approximately 300 $\mu$ s upon changes in operating frequency or antenna impedance. This tuner provides superior reconfiguration times over other high-power tuners in the literature. The tuner possesses losses as low as 0.77 dB and at least 30% Smith chart coverage over the entire tunable bandwidth. With a 26.7- $\mu $ s switching speed, the impedance tuner is also demonstrated to handle 20 W of power at all frequencies and states with over 40 W of power for greater than half of the octave bandwidth and power handling measured as high as 70 W. The combination of fast reconfiguration and high power handling in an impedance tuner can enable cognitive radar systems to adapt to a congested and dynamic environment in real time.


  • Experimental Investigation of a Photogenerated Silicon Plasma Monopole Antenna

    by Thomas R. Jones, Alden Fisher, Dimitrios Peroulis

    This work investigates the photoconductive effect in high resistivity silicon as the radiating element of a plasma monopole antenna. A silicon chiplet forming the monopole is mounted on top of an antenna feed network patterned on a printed circuit board substrate. By exciting the silicon chiplet with a light source supplied by optical fibers, the monopole can be changed from a dielectric to a conductor, thus making the antenna indistinguishable from typical substrates in the OFF-state and radiating in its ON-state, respectively. The experimental results show a peak broadside realized gain of -2.6 dBi at 16.9 GHz, and an ON/OFF ratio greater than 17.8 dB from 14.2 to 20 GHz. The silicon plasma antenna is also shown to radiate between 43 to 62% of the broadside power in comparison to a fully-copper monopole antenna with equivalent dimensions. The proposed photogenerated silicon plasma monopole antenna demonstrates significant potential as an antenna element for integration within a plasma antenna array system.


  • A Photogenerated Silicon Plasma Waveguide Switch and Variable Attenuator for Millimeter-Wave Applications

    by Thomas R. Jones, Alden Fisher, Douglas W. Barlage, Dimitrios Peroulis

    This article reports the design, fabrication, and measurement of a millimeter-wave (mm-wave) solid-state $\pi $ -match waveguide switch using bulk silicon micromachining. A photogenerated plasma within a silicon post is utilized as the switching element within the waveguide channel. Not only does this isolate the switch bias network from the RF signal path but also allows for tuning of the OFF-state isolation with increasing optical power for application as a variable attenuator. A measured OFF-state isolation greater than 25 dB up to 40 GHz is reported, with a measured extracted ON-state insertion loss of 0.52 dB at 35 GHz, and less than 0.88 dB across the entire band from 30 to 40 GHz. The proposed switch illustrates the significant potential for photogenerated silicon plasma switching of high-performance bulk micromachined mm-wave waveguides.