Sihyun Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sihyun Kim has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Insung Son
Entrepreneurship Research Institute, Gyeongsang National University, Jinju 52725, Korea
5 shared publications - Sang Hyung Park
Department of Logistics, Korea Maritime and Ocean University, Busan, South Korea
4 shared publications Je-Ho Hwang
Korea Maritime & Ocean Univ, Dept Logist, Busan, South Korea
2 shared publicationsKorea Trade Research Association
2 shared publications- Dalwon Kang
Department of Logistics, Northern Logistics Research and Support Centre, Donghae 25798, Korea
1 shared publication - Gwijeong Park
Department of Management, Gyeongsang National University, JinJu 52828, Korea
1 shared publication
Latest Publications
- Open Access
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 57387-57397
Impact of Mixed Traffic Flow Involving Connected Automated Vehicles and Human-Driven Vehicles at Roll-On and Roll-Off Ports
This study investigates the impact of mixed traffic flow involving connected automated vehicles (CAVs) and human-driven vehicles (HDVs) at roll-on and roll-off (Ro-Ro) ports. Using the simulation of urban mobility with a traffic control interface, we developed port environments incorporating various car-following models. We analysed the efficiency of port operations under mixed traffic scenarios with increasing CAV penetration rates. The findings demonstrate significant improvements in productivity and reductions in emissions and fuel consumption as CAV penetration increases. Specifically, 100% penetration of CAVs leads to a productivity increase of up to 71.14%, a substantial decrease in carbon monoxide, hydrocarbons and nitrogen oxide emissions as well as a reduction in fuel consumption by over 70% in a double-ramp scenario. This study provides valuable insights into the practical implementation and phased transition towards fully automated vehicle operations in Ro-Ro ports.
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 57387-57397
Open AccessImpact of Mixed Traffic Flow Involving Connected Automated Vehicles and Human-Driven Vehicles at Roll-On and Roll-Off Ports
This study investigates the impact of mixed traffic flow involving connected automated vehicles (CAVs) and human-driven vehicles (HDVs) at roll-on and roll-off (Ro-Ro) ports. Using the simulation of urban mobility with a traffic control interface, we developed port environments incorporating various car-following models. We analysed the efficiency of port operations under mixed traffic scenarios with increasing CAV penetration rates. The findings demonstrate significant improvements in productivity and reductions in emissions and fuel consumption as CAV penetration increases. Specifically, 100% penetration of CAVs leads to a productivity increase of up to 71.14%, a substantial decrease in carbon monoxide, hydrocarbons and nitrogen oxide emissions as well as a reduction in fuel consumption by over 70% in a double-ramp scenario. This study provides valuable insights into the practical implementation and phased transition towards fully automated vehicle operations in Ro-Ro ports.
- Open Access
- 15 October 2024
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 31 (5) , 1680-1688
A Case Study on Sustainable Energy Use from Ballast Water Management System in Transport Vessels
A ballast water management system (BWMS) is an essential module that is directly influential for navigation efficiencies and safety for vessel operations. The net function of the BWMS is to maintain the stability of vessels. This study examines the p...
- 15 October 2024
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 31 (5) , 1680-1688
Open AccessA Case Study on Sustainable Energy Use from Ballast Water Management System in Transport Vessels
A ballast water management system (BWMS) is an essential module that is directly influential for navigation efficiencies and safety for vessel operations. The net function of the BWMS is to maintain the stability of vessels. This study examines the p...
- Open Access
- 29 July 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (8) , 1507
Autonomous Vehicle-Loading System Simulation and Cost Model Analysis of Roll-On, Roll-Off Port Operations
The gradual commercialization of entirely autonomous vehicles is expected to bring numerous benefits, such as structural transformation in the industry. Specifically, in maritime transportation, automobile terminals that import and export finished autos are seen to transform their current loading system into a CAV (connected automated vehicle)-loading system to accommodate autonomous vehicles. In this study, the impact of introducing a CAV-loading system to a roll-on, roll-off (RORO) ports was investigated. Simulation models were developed to test the performance of the terminal with the CAV-loading system. Then, a cost model was developed to determine the economic benefits of the CAV-loading system. The results in this study revealed that operating costs were reduced by 90%, while terminal operations were significantly improved. In addition, the study revealed that using the CAV-loading system resulted in a 12% reduction in CO2 emissions compared to that using the current loading system. The originality of this study lies in its transformative potential for an industry that heavily relies on human labor and has limited mechanization and automation. This study provides significant implications for incorporating autonomous vehicles in planned automobile terminal operations.
- 29 July 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (8) , 1507
Open AccessAutonomous Vehicle-Loading System Simulation and Cost Model Analysis of Roll-On, Roll-Off Port Operations
The gradual commercialization of entirely autonomous vehicles is expected to bring numerous benefits, such as structural transformation in the industry. Specifically, in maritime transportation, automobile terminals that import and export finished autos are seen to transform their current loading system into a CAV (connected automated vehicle)-loading system to accommodate autonomous vehicles. In this study, the impact of introducing a CAV-loading system to a roll-on, roll-off (RORO) ports was investigated. Simulation models were developed to test the performance of the terminal with the CAV-loading system. Then, a cost model was developed to determine the economic benefits of the CAV-loading system. The results in this study revealed that operating costs were reduced by 90%, while terminal operations were significantly improved. In addition, the study revealed that using the CAV-loading system resulted in a 12% reduction in CO2 emissions compared to that using the current loading system. The originality of this study lies in its transformative potential for an industry that heavily relies on human labor and has limited mechanization and automation. This study provides significant implications for incorporating autonomous vehicles in planned automobile terminal operations.
- 30 June 2023
- Published by Journal of Korea Trade in Journal of Korea Trade
- Vol. 27 (3) , 119-146
Emission Control Routes in Container Shipping between Korea-China
Purpose – As the severity of air pollution caused by the shipping industry is becoming evident, port authorities have started making efforts to reduce air pollutants. Considering the limitations of the currently implemented emission-control area (ECA) and vessel-speed reduction program (VSRP), which are narrow in the designation range and navigation behavior of ships, this study proposes an emission-control route (ECR) that can complement the aforementioned two environmental policies. Design/methodology – This study was conducted on Korea-China trade service routes (ports of call) of regular liners. This study employed vessel-specific data, which is from an automatic identification system (AIS), for 1,728 maritime transportations performed by 387 container vessels during one year (July 1, 2021, to June 30, 2022). Performing a scenario analysis, this study analyzed the effectiveness of reduced air-pollutant emissions. Findings – This study found that the implementation of ECRs could increase average voyage time by 12.38%-25.28% but reduced air-pollutant emissions by 29.02%-43.54%. Additionally, the increase in average voyage times reduces the anchorage time of ships outside ports, providing an incentive for ship operators to voluntarily participate in compliance with regulations, thereby contributing to the establishment of a virtuous cycle of air-environmental policies related to ships. Originality/value – This study aims to verify the policy effectiveness by designing an ECR scope for liner trade routes between Korea and China. Therefore, originality and the value of this study includes conceptualizing the ECR system, analyzing its environmental performance, and exploring new policies that can be implemented while complementing existing policies.
- 30 June 2023
- Published by Journal of Korea Trade in Journal of Korea Trade
- Vol. 27 (3) , 119-146
Emission Control Routes in Container Shipping between Korea-China
Purpose – As the severity of air pollution caused by the shipping industry is becoming evident, port authorities have started making efforts to reduce air pollutants. Considering the limitations of the currently implemented emission-control area (ECA) and vessel-speed reduction program (VSRP), which are narrow in the designation range and navigation behavior of ships, this study proposes an emission-control route (ECR) that can complement the aforementioned two environmental policies. Design/methodology – This study was conducted on Korea-China trade service routes (ports of call) of regular liners. This study employed vessel-specific data, which is from an automatic identification system (AIS), for 1,728 maritime transportations performed by 387 container vessels during one year (July 1, 2021, to June 30, 2022). Performing a scenario analysis, this study analyzed the effectiveness of reduced air-pollutant emissions. Findings – This study found that the implementation of ECRs could increase average voyage time by 12.38%-25.28% but reduced air-pollutant emissions by 29.02%-43.54%. Additionally, the increase in average voyage times reduces the anchorage time of ships outside ports, providing an incentive for ship operators to voluntarily participate in compliance with regulations, thereby contributing to the establishment of a virtuous cycle of air-environmental policies related to ships. Originality/value – This study aims to verify the policy effectiveness by designing an ECR scope for liner trade routes between Korea and China. Therefore, originality and the value of this study includes conceptualizing the ECR system, analyzing its environmental performance, and exploring new policies that can be implemented while complementing existing policies.
- 1 May 2022
- Published by Journal of Korea Trade in Journal of Korea Trade
- Vol. 26 (3) , 117-136
Analysis of High Concentration Diffusion Pattern by Air Pollutions in Port Industry Interfaces
Purpose - Port is vital for international trade accounting for approximately 80% of world cargo transportation in the global trade sector. Air pollutants emitted owing to the related industry interfaces developed around the port spread throughout the dense population region can have harmful effects on the nearby residents. This study aims to analyze high-concentration diffusion pattern by air pollutants, considering the main management periods by air pollutants. Design/methodology - Employing the concentration criteria per main air pollutant, the analyses of concentration change patterns per air pollutant, wind characteristics that directly affected the air pollutant diffusion, distribution types per air pollutant, and high-concentration diffusion patterns by season according to time changes were conducted. Findings - The substances that caused harmful levels of air pollution in the hinterland living zone of the Busan New Port were PM_10, PM_2.5, and NO_2. Furthermore, the intensive management periods were as follows: For PM_10, 24-h (spring), 12:00-16:00 (summer), 12:00-16:00 (summer), 20:00-12:00 (fall), and 24:00-20:00 (winter), and for PM_2.5, 24-h (all four seasons), and for NO_2, 23:00-04:00 (spring), 23:00-08:00 (summer), and 20:00-08:00 (fall), and 23:00-04:00 (winter). Originality/value - Research finding indicates that regular monitoring and countermeasures to reduce air pollution for each air pollutant makes it possible to achieve effective air quality control in the port and hinterland living zones.
- 1 May 2022
- Published by Journal of Korea Trade in Journal of Korea Trade
- Vol. 26 (3) , 117-136
Analysis of High Concentration Diffusion Pattern by Air Pollutions in Port Industry Interfaces
Purpose - Port is vital for international trade accounting for approximately 80% of world cargo transportation in the global trade sector. Air pollutants emitted owing to the related industry interfaces developed around the port spread throughout the dense population region can have harmful effects on the nearby residents. This study aims to analyze high-concentration diffusion pattern by air pollutants, considering the main management periods by air pollutants. Design/methodology - Employing the concentration criteria per main air pollutant, the analyses of concentration change patterns per air pollutant, wind characteristics that directly affected the air pollutant diffusion, distribution types per air pollutant, and high-concentration diffusion patterns by season according to time changes were conducted. Findings - The substances that caused harmful levels of air pollution in the hinterland living zone of the Busan New Port were PM_10, PM_2.5, and NO_2. Furthermore, the intensive management periods were as follows: For PM_10, 24-h (spring), 12:00-16:00 (summer), 12:00-16:00 (summer), 20:00-12:00 (fall), and 24:00-20:00 (winter), and for PM_2.5, 24-h (all four seasons), and for NO_2, 23:00-04:00 (spring), 23:00-08:00 (summer), and 20:00-08:00 (fall), and 23:00-04:00 (winter). Originality/value - Research finding indicates that regular monitoring and countermeasures to reduce air pollution for each air pollutant makes it possible to achieve effective air quality control in the port and hinterland living zones.
- Open Access
- 5 February 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (3) , 1844
Supply Chain Management Strategy and Capital Structure of Global Information and Communications Technology Companies
Supply chain management (SCM) plays an important role in international work distribution mechanisms. This phenomenon has shifted to an SCM-to-SCM competition rather than corporate-to-corporate competition in the global market. Apple and Samsung Electronics are the two major global information and communications technology (ICT) companies, each choosing different SCM strategies to stabilize production while minimizing inventory and maintaining ongoing partnerships with suppliers. To analyze the relationship between strategic differences in SCM structure of the ICT companies and capital, while employing the generalized method of moments, this study analyzed partnerships with suppliers from a financial perspective for long-term growth and stable production. Results identified that the target debt ratio of Apple’s parts suppliers was 38%, which was slightly higher than that of US companies (33%). In the relationship between capital structure and SCM structures, the company’s debt ratio decreases if the strength of the strategic alliance and the strength of the horizontal integration of global parts suppliers are higher. Specifically, Apple’s parts suppliers with non-equity alliances, such as technological and R&D alliances, have reduced debt ratios more than companies with equity alliances. In the case of Samsung Electronics’ parts suppliers, primary vendors had a lower debt ratio than secondary vendors. These results indicates that if the strength of the vertical integration with the international strategic alliances is greater, they are more likely to adopt a lower debt ratio policy. Identifying the relationship between SCM strategic difference and capital structure, this study provides valuable insights for corporate sustainability.
- 5 February 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (3) , 1844
Open AccessSupply Chain Management Strategy and Capital Structure of Global Information and Communications Technology Companies
Supply chain management (SCM) plays an important role in international work distribution mechanisms. This phenomenon has shifted to an SCM-to-SCM competition rather than corporate-to-corporate competition in the global market. Apple and Samsung Electronics are the two major global information and communications technology (ICT) companies, each choosing different SCM strategies to stabilize production while minimizing inventory and maintaining ongoing partnerships with suppliers. To analyze the relationship between strategic differences in SCM structure of the ICT companies and capital, while employing the generalized method of moments, this study analyzed partnerships with suppliers from a financial perspective for long-term growth and stable production. Results identified that the target debt ratio of Apple’s parts suppliers was 38%, which was slightly higher than that of US companies (33%). In the relationship between capital structure and SCM structures, the company’s debt ratio decreases if the strength of the strategic alliance and the strength of the horizontal integration of global parts suppliers are higher. Specifically, Apple’s parts suppliers with non-equity alliances, such as technological and R&D alliances, have reduced debt ratios more than companies with equity alliances. In the case of Samsung Electronics’ parts suppliers, primary vendors had a lower debt ratio than secondary vendors. These results indicates that if the strength of the vertical integration with the international strategic alliances is greater, they are more likely to adopt a lower debt ratio policy. Identifying the relationship between SCM strategic difference and capital structure, this study provides valuable insights for corporate sustainability.
- Open Access
- 30 January 2022
- Published by Hindawi Limited in Journal of Advanced Transportation
- Vol. 2022, 1-14
Automatic Guided Vehicles Introduction Impacts to Roll-On/Roll-Off Terminals: Simulation and Cost Model Analysis
Automatic guided vehicles (AGVs) have been successfully applied to cargo terminals to reduce operating costs and improve productivity. However, the focus was on container terminal operations. Ports with roll-on/roll-off (RORO) terminals still heavily depend on human resources for the loading/unloading processes. Work operations are affected by human errors and safety issues. In particular, terminals where vehicles cannot be stacked pressure workers to handle cargo more rapidly, which induces more errors. In this study, we propose automating RORO terminal operations by using AGVs. We assessed the impact of AGVs on the productivity, cost efficiency, and environment. A series of simulation models was developed on the basis of the current loading system at an actual port to test the impact of AGVs. Then, we developed a cost model to analyze the economic benefit of AGVs compared with the current loading system. The environmental benefits were also analyzed. Results revealed that a system using 29 AGVs matched the productivity of the current loading system, and using more AGVs increased the productivity. For a given productivity level, the total operating cost of the AGV system was three times less than that of the current system over a 15-year period. The AGV system also showed great potential for improving the environmental friendliness of terminal operations. This is the first study to propose automating RORO terminal operations to improve productivity and sustainability through AGV technology rather than human factors. AGVs are expected to become a good option in the future to address labor shortages and the untact era.
- 30 January 2022
- Published by Hindawi Limited in Journal of Advanced Transportation
- Vol. 2022, 1-14
Open AccessAutomatic Guided Vehicles Introduction Impacts to Roll-On/Roll-Off Terminals: Simulation and Cost Model Analysis
Automatic guided vehicles (AGVs) have been successfully applied to cargo terminals to reduce operating costs and improve productivity. However, the focus was on container terminal operations. Ports with roll-on/roll-off (RORO) terminals still heavily depend on human resources for the loading/unloading processes. Work operations are affected by human errors and safety issues. In particular, terminals where vehicles cannot be stacked pressure workers to handle cargo more rapidly, which induces more errors. In this study, we propose automating RORO terminal operations by using AGVs. We assessed the impact of AGVs on the productivity, cost efficiency, and environment. A series of simulation models was developed on the basis of the current loading system at an actual port to test the impact of AGVs. Then, we developed a cost model to analyze the economic benefit of AGVs compared with the current loading system. The environmental benefits were also analyzed. Results revealed that a system using 29 AGVs matched the productivity of the current loading system, and using more AGVs increased the productivity. For a given productivity level, the total operating cost of the AGV system was three times less than that of the current system over a 15-year period. The AGV system also showed great potential for improving the environmental friendliness of terminal operations. This is the first study to propose automating RORO terminal operations to improve productivity and sustainability through AGV technology rather than human factors. AGVs are expected to become a good option in the future to address labor shortages and the untact era.
- Open Access
- 29 June 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (7) , 720
Short Term Forecast of Container Throughput: New Variables Application for the Port of Douala
An accurate container throughput forecast is vital for any port. Since overall improvements in port performance and competitiveness can be derailed by port bottlenecks, ports need to find leverage to identify and prioritize measures to improve weak key performance indicators (KPIs) to attain growth opportunities. Prior studies had modeled container throughput from socio-economic and growth projection factors. This study aims to provide a practical method for forecasting the optimal container throughput a port can physically handle/attract given a certain level of terminal operation efficiency through random forest (RF) and multilayer perceptron (MLP) models. The study variables are derived from the port operations dimension and include ship turnaround time, vessel draft, container dwell time, berth productivity, container storage capacity, and custom declaration time. Evaluations are made based on the R-squared, NRMSE, MAE and MAPE. Model comparison is deduced with seven competing models in container throughput forecasting. The findings indicate that the RF model is a potential candidate for forecasting the engineering optimal throughput of Douala port. Model interpretation is provided through feature importance and partial dependence plots. The findings from this study will help reduce uncertainty and provide leverage for port management to spot bottlenecks and engage in better port planning and development projects which will strengthen their international competitive advantage.
- 29 June 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (7) , 720
Open AccessShort Term Forecast of Container Throughput: New Variables Application for the Port of Douala
An accurate container throughput forecast is vital for any port. Since overall improvements in port performance and competitiveness can be derailed by port bottlenecks, ports need to find leverage to identify and prioritize measures to improve weak key performance indicators (KPIs) to attain growth opportunities. Prior studies had modeled container throughput from socio-economic and growth projection factors. This study aims to provide a practical method for forecasting the optimal container throughput a port can physically handle/attract given a certain level of terminal operation efficiency through random forest (RF) and multilayer perceptron (MLP) models. The study variables are derived from the port operations dimension and include ship turnaround time, vessel draft, container dwell time, berth productivity, container storage capacity, and custom declaration time. Evaluations are made based on the R-squared, NRMSE, MAE and MAPE. Model comparison is deduced with seven competing models in container throughput forecasting. The findings indicate that the RF model is a potential candidate for forecasting the engineering optimal throughput of Douala port. Model interpretation is provided through feature importance and partial dependence plots. The findings from this study will help reduce uncertainty and provide leverage for port management to spot bottlenecks and engage in better port planning and development projects which will strengthen their international competitive advantage.
- Open Access
- 17 May 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (10) , 5573
Is Establishing a New Partnership Useful Information for Investors in the Smartphone Supply Market?
This study analyzed partner volatility (new, old, revocation partners) and country-specific signal effects (United States (US), Taiwan, Japan, and South Korea) for Apple iPhone parts suppliers from 2007 to 2018. Mid- to long-term stock price movements were also analyzed to define trading patterns by investor type. The results using logit regression analysis revealed that new partners and revocation partners each have a signaling effect perceived as positive and negative information in the short term, and the excess returns by country showed a positive signaling effect in the order of the US, Taiwan, South Korea, and Japan. The findings also suggest that the change in the new partners’ stock price after the preannouncement of new products was useful investment information. Moreover, information asymmetry was found between individual investors, institutions, and foreigners. Results indicate that new partner selection in the smartphone market impacts corporate value and serves as useful investment information.
- 17 May 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (10) , 5573
Open AccessIs Establishing a New Partnership Useful Information for Investors in the Smartphone Supply Market?
This study analyzed partner volatility (new, old, revocation partners) and country-specific signal effects (United States (US), Taiwan, Japan, and South Korea) for Apple iPhone parts suppliers from 2007 to 2018. Mid- to long-term stock price movements were also analyzed to define trading patterns by investor type. The results using logit regression analysis revealed that new partners and revocation partners each have a signaling effect perceived as positive and negative information in the short term, and the excess returns by country showed a positive signaling effect in the order of the US, Taiwan, South Korea, and Japan. The findings also suggest that the change in the new partners’ stock price after the preannouncement of new products was useful investment information. Moreover, information asymmetry was found between individual investors, institutions, and foreigners. Results indicate that new partner selection in the smartphone market impacts corporate value and serves as useful investment information.
- Open Access
- 19 April 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (4) , 441
Simulation Modelling for Automated Guided Vehicle Introduction to the Loading Process of Ro-Ro Ships
This paper aims to introduce the adaptation of automated guided vehicles (AGVs) in the car-loading process of Ro-Ro ships compared with the current loading process. This study analyzed the applicable scenarios for the AGVs’ adaptation in a Ro-Ro port, employing Arena simulation to compare the productivity of the loading processes. The results revealed that the adaptation of the AGVs in the car-loading process of the Ro-Ro ships improves productivity and solves several problems of the current loading process. With 21 or more AGVs, the entire processing time is similar to or less than the current loading process, whereas, after 40 AGVs, it stayed the same. Furthermore, as the number of AGVs increases, the transfer time decreases, but the queue becomes longer. Identifying the effect of the AGV adaptation, this study provides valuable insights for developing the various traffic situations in Ro-Ro port operations.
- 19 April 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (4) , 441
Open AccessSimulation Modelling for Automated Guided Vehicle Introduction to the Loading Process of Ro-Ro Ships
This paper aims to introduce the adaptation of automated guided vehicles (AGVs) in the car-loading process of Ro-Ro ships compared with the current loading process. This study analyzed the applicable scenarios for the AGVs’ adaptation in a Ro-Ro port, employing Arena simulation to compare the productivity of the loading processes. The results revealed that the adaptation of the AGVs in the car-loading process of the Ro-Ro ships improves productivity and solves several problems of the current loading process. With 21 or more AGVs, the entire processing time is similar to or less than the current loading process, whereas, after 40 AGVs, it stayed the same. Furthermore, as the number of AGVs increases, the transfer time decreases, but the queue becomes longer. Identifying the effect of the AGV adaptation, this study provides valuable insights for developing the various traffic situations in Ro-Ro port operations.