Sang Hyung Park
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sang Hyung Park has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Sihyun Kim
Department of Logistics, Korea Maritime and Ocean University, Busan 49112, Republic of Korea
4 shared publications - Hangjin Yang
Department of International Trade, Gyeongsang National University, Jinju 52828, Korea
1 shared publication - Jeho Hwang
Department of Logistics, Korea Maritime and Ocean University, Busan 49112, Korea
1 shared publication - Jeho Hwang
Department of Logistics, Korea Maritime and Ocean University, Busan 49112, Republic of Korea
1 shared publication Sihyun Kim
Department of Logistics, Korea Maritime and Ocean University, Busan, South Korea
1 shared publication- Sohyun Yun
KMOU-KMI Cooperative Course, Korea Maritime and Ocean University, Busan 49112, Republic of Korea
1 shared publication
Latest Publications
- Open Access
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 57387-57397
Impact of Mixed Traffic Flow Involving Connected Automated Vehicles and Human-Driven Vehicles at Roll-On and Roll-Off Ports
This study investigates the impact of mixed traffic flow involving connected automated vehicles (CAVs) and human-driven vehicles (HDVs) at roll-on and roll-off (Ro-Ro) ports. Using the simulation of urban mobility with a traffic control interface, we developed port environments incorporating various car-following models. We analysed the efficiency of port operations under mixed traffic scenarios with increasing CAV penetration rates. The findings demonstrate significant improvements in productivity and reductions in emissions and fuel consumption as CAV penetration increases. Specifically, 100% penetration of CAVs leads to a productivity increase of up to 71.14%, a substantial decrease in carbon monoxide, hydrocarbons and nitrogen oxide emissions as well as a reduction in fuel consumption by over 70% in a double-ramp scenario. This study provides valuable insights into the practical implementation and phased transition towards fully automated vehicle operations in Ro-Ro ports.
- 27 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 57387-57397
Open AccessImpact of Mixed Traffic Flow Involving Connected Automated Vehicles and Human-Driven Vehicles at Roll-On and Roll-Off Ports
This study investigates the impact of mixed traffic flow involving connected automated vehicles (CAVs) and human-driven vehicles (HDVs) at roll-on and roll-off (Ro-Ro) ports. Using the simulation of urban mobility with a traffic control interface, we developed port environments incorporating various car-following models. We analysed the efficiency of port operations under mixed traffic scenarios with increasing CAV penetration rates. The findings demonstrate significant improvements in productivity and reductions in emissions and fuel consumption as CAV penetration increases. Specifically, 100% penetration of CAVs leads to a productivity increase of up to 71.14%, a substantial decrease in carbon monoxide, hydrocarbons and nitrogen oxide emissions as well as a reduction in fuel consumption by over 70% in a double-ramp scenario. This study provides valuable insights into the practical implementation and phased transition towards fully automated vehicle operations in Ro-Ro ports.
- Open Access
- 4 October 2023
- Published by Taylor & Francis in Transportation Planning and Technology
- Vol. 47 (2) , 258-283
Connected and automated vehicle loading system for improving operational inefficiency from human driven vehicle in roll-on/roll-off port operations
- 4 October 2023
- Published by Taylor & Francis in Transportation Planning and Technology
- Vol. 47 (2) , 258-283
Open AccessConnected and automated vehicle loading system for improving operational inefficiency from human driven vehicle in roll-on/roll-off port operations
- Open Access
- 29 July 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (8) , 1507
Autonomous Vehicle-Loading System Simulation and Cost Model Analysis of Roll-On, Roll-Off Port Operations
The gradual commercialization of entirely autonomous vehicles is expected to bring numerous benefits, such as structural transformation in the industry. Specifically, in maritime transportation, automobile terminals that import and export finished autos are seen to transform their current loading system into a CAV (connected automated vehicle)-loading system to accommodate autonomous vehicles. In this study, the impact of introducing a CAV-loading system to a roll-on, roll-off (RORO) ports was investigated. Simulation models were developed to test the performance of the terminal with the CAV-loading system. Then, a cost model was developed to determine the economic benefits of the CAV-loading system. The results in this study revealed that operating costs were reduced by 90%, while terminal operations were significantly improved. In addition, the study revealed that using the CAV-loading system resulted in a 12% reduction in CO2 emissions compared to that using the current loading system. The originality of this study lies in its transformative potential for an industry that heavily relies on human labor and has limited mechanization and automation. This study provides significant implications for incorporating autonomous vehicles in planned automobile terminal operations.
- 29 July 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (8) , 1507
Open AccessAutonomous Vehicle-Loading System Simulation and Cost Model Analysis of Roll-On, Roll-Off Port Operations
The gradual commercialization of entirely autonomous vehicles is expected to bring numerous benefits, such as structural transformation in the industry. Specifically, in maritime transportation, automobile terminals that import and export finished autos are seen to transform their current loading system into a CAV (connected automated vehicle)-loading system to accommodate autonomous vehicles. In this study, the impact of introducing a CAV-loading system to a roll-on, roll-off (RORO) ports was investigated. Simulation models were developed to test the performance of the terminal with the CAV-loading system. Then, a cost model was developed to determine the economic benefits of the CAV-loading system. The results in this study revealed that operating costs were reduced by 90%, while terminal operations were significantly improved. In addition, the study revealed that using the CAV-loading system resulted in a 12% reduction in CO2 emissions compared to that using the current loading system. The originality of this study lies in its transformative potential for an industry that heavily relies on human labor and has limited mechanization and automation. This study provides significant implications for incorporating autonomous vehicles in planned automobile terminal operations.
- Open Access
- 30 January 2022
- Published by Hindawi Limited in Journal of Advanced Transportation
- Vol. 2022, 1-14
Automatic Guided Vehicles Introduction Impacts to Roll-On/Roll-Off Terminals: Simulation and Cost Model Analysis
Automatic guided vehicles (AGVs) have been successfully applied to cargo terminals to reduce operating costs and improve productivity. However, the focus was on container terminal operations. Ports with roll-on/roll-off (RORO) terminals still heavily depend on human resources for the loading/unloading processes. Work operations are affected by human errors and safety issues. In particular, terminals where vehicles cannot be stacked pressure workers to handle cargo more rapidly, which induces more errors. In this study, we propose automating RORO terminal operations by using AGVs. We assessed the impact of AGVs on the productivity, cost efficiency, and environment. A series of simulation models was developed on the basis of the current loading system at an actual port to test the impact of AGVs. Then, we developed a cost model to analyze the economic benefit of AGVs compared with the current loading system. The environmental benefits were also analyzed. Results revealed that a system using 29 AGVs matched the productivity of the current loading system, and using more AGVs increased the productivity. For a given productivity level, the total operating cost of the AGV system was three times less than that of the current system over a 15-year period. The AGV system also showed great potential for improving the environmental friendliness of terminal operations. This is the first study to propose automating RORO terminal operations to improve productivity and sustainability through AGV technology rather than human factors. AGVs are expected to become a good option in the future to address labor shortages and the untact era.
- 30 January 2022
- Published by Hindawi Limited in Journal of Advanced Transportation
- Vol. 2022, 1-14
Open AccessAutomatic Guided Vehicles Introduction Impacts to Roll-On/Roll-Off Terminals: Simulation and Cost Model Analysis
Automatic guided vehicles (AGVs) have been successfully applied to cargo terminals to reduce operating costs and improve productivity. However, the focus was on container terminal operations. Ports with roll-on/roll-off (RORO) terminals still heavily depend on human resources for the loading/unloading processes. Work operations are affected by human errors and safety issues. In particular, terminals where vehicles cannot be stacked pressure workers to handle cargo more rapidly, which induces more errors. In this study, we propose automating RORO terminal operations by using AGVs. We assessed the impact of AGVs on the productivity, cost efficiency, and environment. A series of simulation models was developed on the basis of the current loading system at an actual port to test the impact of AGVs. Then, we developed a cost model to analyze the economic benefit of AGVs compared with the current loading system. The environmental benefits were also analyzed. Results revealed that a system using 29 AGVs matched the productivity of the current loading system, and using more AGVs increased the productivity. For a given productivity level, the total operating cost of the AGV system was three times less than that of the current system over a 15-year period. The AGV system also showed great potential for improving the environmental friendliness of terminal operations. This is the first study to propose automating RORO terminal operations to improve productivity and sustainability through AGV technology rather than human factors. AGVs are expected to become a good option in the future to address labor shortages and the untact era.
- Open Access
- 19 April 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (4) , 441
Simulation Modelling for Automated Guided Vehicle Introduction to the Loading Process of Ro-Ro Ships
This paper aims to introduce the adaptation of automated guided vehicles (AGVs) in the car-loading process of Ro-Ro ships compared with the current loading process. This study analyzed the applicable scenarios for the AGVs’ adaptation in a Ro-Ro port, employing Arena simulation to compare the productivity of the loading processes. The results revealed that the adaptation of the AGVs in the car-loading process of the Ro-Ro ships improves productivity and solves several problems of the current loading process. With 21 or more AGVs, the entire processing time is similar to or less than the current loading process, whereas, after 40 AGVs, it stayed the same. Furthermore, as the number of AGVs increases, the transfer time decreases, but the queue becomes longer. Identifying the effect of the AGV adaptation, this study provides valuable insights for developing the various traffic situations in Ro-Ro port operations.
- 19 April 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (4) , 441
Open AccessSimulation Modelling for Automated Guided Vehicle Introduction to the Loading Process of Ro-Ro Ships
This paper aims to introduce the adaptation of automated guided vehicles (AGVs) in the car-loading process of Ro-Ro ships compared with the current loading process. This study analyzed the applicable scenarios for the AGVs’ adaptation in a Ro-Ro port, employing Arena simulation to compare the productivity of the loading processes. The results revealed that the adaptation of the AGVs in the car-loading process of the Ro-Ro ships improves productivity and solves several problems of the current loading process. With 21 or more AGVs, the entire processing time is similar to or less than the current loading process, whereas, after 40 AGVs, it stayed the same. Furthermore, as the number of AGVs increases, the transfer time decreases, but the queue becomes longer. Identifying the effect of the AGV adaptation, this study provides valuable insights for developing the various traffic situations in Ro-Ro port operations.