Mohammad Robat Mili
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohammad Robat Mili has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
- Derrick Wing Kwan Ng
University of New South Wales
9 shared publications - Sepideh Javadi
Pasargad Institute for Advanced Innovative Solutions (PIAIS), Tehran, Iran
9 shared publications - Ata Khalili
Institute for Digital Communications, Friedrich-Alexander-University Erlangen-Nrnberg, Erlangen, Germany
8 shared publications - Farshad Zeinali
GIC & 6GIC, Institute for Communication Systems (ICS), University of Surrey, Guildford, U. K
8 shared publications - Mehdi Rasti
Centre for Wireless Communications (CWC), University of Oulu, Oulu, Finland
7 shared publications - Naofal Al-Dhahir
The University of Texas at Dallas
7 shared publications
Latest Publications
- Open Access
- 11 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 89172-89184
Sum Rate Maximization for Beyond Diagonal-RIS-Aided Non-Terrestrial Networks Using RSMA
Non-terrestrial networks (NTNs) are expected to revolutionize global high-speed connectivity and enable low-latency communication for a wide range of applications. Despite their advantages, NTNs face critical challenges such as high power consumption, limited onboard processing resources, and severe spectral congestion. To address these issues, recent studies have introduced energy- and spectrum-efficient technologies such as Beyond Diagonal Reconfigurable Intelligent Surface (BD-RIS) and Rate-Splitting Multiple Access (RSMA), which have shown great potential in enhancing overall network performance. This paper investigates the problem of sum-rate maximization in BD-RIS-assisted NTNs integrated with RSMA, focusing on the joint optimization of multiple design variables. Specifically, the objective is to simultaneously design the beamforming vectors, adapt the RSMA transmission rates, and configure the BD-RIS phase-shift matrix. A non-convex optimization problem is formulated to capture this coupled design, which is inherently challenging due to its high dimensionality and nonlinear characteristics. To efficiently tackle this complexity, we propose a learning-based solution leveraging a Meta Twin Delayed Deep Deterministic Policy Gradient (Meta-TD3) algorithm. This advanced reinforcement learning framework enables adaptive and dynamic optimization under diverse channel conditions. Numerical simulations validate the effectiveness of the proposed approach, demonstrating that the BD-RIS-assisted scheme significantly outperforms conventional systems without BD-RIS in terms of achievable sum rate.
- 11 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 89172-89184
Open AccessSum Rate Maximization for Beyond Diagonal-RIS-Aided Non-Terrestrial Networks Using RSMA
Non-terrestrial networks (NTNs) are expected to revolutionize global high-speed connectivity and enable low-latency communication for a wide range of applications. Despite their advantages, NTNs face critical challenges such as high power consumption, limited onboard processing resources, and severe spectral congestion. To address these issues, recent studies have introduced energy- and spectrum-efficient technologies such as Beyond Diagonal Reconfigurable Intelligent Surface (BD-RIS) and Rate-Splitting Multiple Access (RSMA), which have shown great potential in enhancing overall network performance. This paper investigates the problem of sum-rate maximization in BD-RIS-assisted NTNs integrated with RSMA, focusing on the joint optimization of multiple design variables. Specifically, the objective is to simultaneously design the beamforming vectors, adapt the RSMA transmission rates, and configure the BD-RIS phase-shift matrix. A non-convex optimization problem is formulated to capture this coupled design, which is inherently challenging due to its high dimensionality and nonlinear characteristics. To efficiently tackle this complexity, we propose a learning-based solution leveraging a Meta Twin Delayed Deep Deterministic Policy Gradient (Meta-TD3) algorithm. This advanced reinforcement learning framework enables adaptive and dynamic optimization under diverse channel conditions. Numerical simulations validate the effectiveness of the proposed approach, demonstrating that the BD-RIS-assisted scheme significantly outperforms conventional systems without BD-RIS in terms of achievable sum rate.
- 1 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. PP (00906778) , 1
Enhancing Energy and Spectral Efficiency in IoT-Cellular Networks via Active SIM-Equipped LEO Satellites
This paper investigates a low Earth orbit (LEO) satellite communication system enhanced by an active stacked intelligent metasurface (ASIM), mounted on the backplate of the satellite’s solar panels to efficiently utilize limited onboard space and reduce the main satellite power amplifier requirements. The system serves multiple ground users via rate-splitting multiple access (RSMA) and IoT devices through a symbiotic radio network. Multi-layer sequential processing in the ASIM improves effective channel gains and suppresses inter-user interference, outperforming active RIS and beyond-diagonal RIS designs. Three optimization approaches are evaluated: block coordinate descent with successive convex approximation (BCD-SCA), model-assisted multi-agent constraint soft actor-critic (MA-CSAC), and multi-constraint proximal policy optimization (MCPPO). Simulation results show that BCD-SCA converges fast and stably in convex scenarios without learning, MCPPO achieves rapid initial convergence with moderate stability, and MA-CSAC attains the highest long-term spectral and energy efficiency in large-scale networks. Energy–spectral efficiency trade-offs are analyzed for different ASIM elements, satellite antennas, and transmit power. Overall, the study demonstrates that integrating multi-layer ASIM with suitable optimization algorithms offers a scalable, energy-efficient, and high-performance solution for next-generation LEO satellite communications.
- 1 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. PP (00906778) , 1
Enhancing Energy and Spectral Efficiency in IoT-Cellular Networks via Active SIM-Equipped LEO Satellites
This paper investigates a low Earth orbit (LEO) satellite communication system enhanced by an active stacked intelligent metasurface (ASIM), mounted on the backplate of the satellite’s solar panels to efficiently utilize limited onboard space and reduce the main satellite power amplifier requirements. The system serves multiple ground users via rate-splitting multiple access (RSMA) and IoT devices through a symbiotic radio network. Multi-layer sequential processing in the ASIM improves effective channel gains and suppresses inter-user interference, outperforming active RIS and beyond-diagonal RIS designs. Three optimization approaches are evaluated: block coordinate descent with successive convex approximation (BCD-SCA), model-assisted multi-agent constraint soft actor-critic (MA-CSAC), and multi-constraint proximal policy optimization (MCPPO). Simulation results show that BCD-SCA converges fast and stably in convex scenarios without learning, MCPPO achieves rapid initial convergence with moderate stability, and MA-CSAC attains the highest long-term spectral and energy efficiency in large-scale networks. Energy–spectral efficiency trade-offs are analyzed for different ASIM elements, satellite antennas, and transmit power. Overall, the study demonstrates that integrating multi-layer ASIM with suitable optimization algorithms offers a scalable, energy-efficient, and high-performance solution for next-generation LEO satellite communications.
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-6
Beamforming Design for Near-Field FIM-aided ISAC Systems: A DRL Approach
This article explores multi-target detection and multi-user communication in a near-field (NF) integrated sensing and communication (ISAC) system, where a flexible intelligent metasurface (FIM) is deployed at the base station (BS). Specifically, the BS operates in downlink mode to communicate with users and sense information from targets utilizing the FIM. The goal is to design optimal beamforming at the BS to meet both communication and sensing performance requirements. To achieve this goal, a multi-objective optimization problem is formulated, to minimize the Cramér-Rao bound while maximizing the sum rate, by jointly optimizing FIM's surface shape and transmit beamforming. To solve the resulting non-convex optimization problem, we develop a reinforcement learning (RL)-based algorithm. Simulation results demonstrate that employing FIM results in a 21% increase in sum rate.
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-6
Beamforming Design for Near-Field FIM-aided ISAC Systems: A DRL Approach
This article explores multi-target detection and multi-user communication in a near-field (NF) integrated sensing and communication (ISAC) system, where a flexible intelligent metasurface (FIM) is deployed at the base station (BS). Specifically, the BS operates in downlink mode to communicate with users and sense information from targets utilizing the FIM. The goal is to design optimal beamforming at the BS to meet both communication and sensing performance requirements. To achieve this goal, a multi-objective optimization problem is formulated, to minimize the Cramér-Rao bound while maximizing the sum rate, by jointly optimizing FIM's surface shape and transmit beamforming. To solve the resulting non-convex optimization problem, we develop a reinforcement learning (RL)-based algorithm. Simulation results demonstrate that employing FIM results in a 21% increase in sum rate.
- 6 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 1762-1766
Hybrid FIM and STAR-BD-RIS-Aided Wireless Communications With Short Packet Length: A Meta-TD3 Approach
Reconfigurable intelligent surfaces (RIS) and flexible intelligent metasurfaces (FIM) have been widely adopted in multi-user wireless communication systems to enhance channel quality through simultaneous transmission and reflection of signals and three-dimensional reconfiguration of antennas. In this letter, we propose a novel system architecture that integrates the benefits of both technologies by deploying an FIM antenna at the base station (BS) and a simultaneously transmitting and reflecting beyond diagonal RIS (STAR-BD-RIS) along the transmission path to ensure sufficient received power for single-antenna users. The objective is to maximize the achievable sum rate considering the short block length by jointly optimizing the FIM surface configuration, the transmit beamforming vector, and STAR-BD-RIS phase shift matrix subject to practical constraints including minimum signal-to-interference-plus-noise ratio (SINR), power limitations, FIM constraint, and the STAR-BD-RIS phase-shift matrix. To solve the resulting non-convex optimization problem, we develop a learning-based approach that incorporates meta-learning into the twin delayed deep deterministic policy gradient (TD3) algorithm, referred to as Meta-TD3. The simulation results demonstrate that the proposed hybrid system outperforms conventional configurations employing either FIM or RIS alone, while the Meta-TD3 algorithm achieves superior performance compared to classic learning techniques.
- 6 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 1762-1766
Hybrid FIM and STAR-BD-RIS-Aided Wireless Communications With Short Packet Length: A Meta-TD3 Approach
Reconfigurable intelligent surfaces (RIS) and flexible intelligent metasurfaces (FIM) have been widely adopted in multi-user wireless communication systems to enhance channel quality through simultaneous transmission and reflection of signals and three-dimensional reconfiguration of antennas. In this letter, we propose a novel system architecture that integrates the benefits of both technologies by deploying an FIM antenna at the base station (BS) and a simultaneously transmitting and reflecting beyond diagonal RIS (STAR-BD-RIS) along the transmission path to ensure sufficient received power for single-antenna users. The objective is to maximize the achievable sum rate considering the short block length by jointly optimizing the FIM surface configuration, the transmit beamforming vector, and STAR-BD-RIS phase shift matrix subject to practical constraints including minimum signal-to-interference-plus-noise ratio (SINR), power limitations, FIM constraint, and the STAR-BD-RIS phase-shift matrix. To solve the resulting non-convex optimization problem, we develop a learning-based approach that incorporates meta-learning into the twin delayed deep deterministic policy gradient (TD3) algorithm, referred to as Meta-TD3. The simulation results demonstrate that the proposed hybrid system outperforms conventional configurations employing either FIM or RIS alone, while the Meta-TD3 algorithm achieves superior performance compared to classic learning techniques.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 1558-1562
URLLC Service for Beyond Diagonal RIS-Enabled ISAC Systems: A Meta-PPO Algorithm
This letter investigates rate-splitting multiple access (RSMA)-based short-packet downlink transmission in an integrated sensing and communication (ISAC) system under channel uncertainty. Specifically, a base station (BS) provides ultra-reliable low-latency communication (URLLC) services to multiple users with the aid of a beyond-diagonal reconfigurable intelligent surface (BD-RIS), while simultaneously detecting a target in the presence of clutter. The objective is to maximize the sum rate by jointly optimizing transmit beamforming, common rate allocation, and BD-RIS reflection beamforming. To address the optimization problem, we propose a Meta proximal policy optimization (Meta-PPO) algorithm, which is a fusion of Meta-learning techniques and the PPO algorithm. Numerical results demonstrate that the proposed BD-RIS-based model outperforms the conventional RIS scheme, while the proposed Meta-PPO algorithm achieves faster convergence and superior performance compared with other deep reinforcement learning (DRL)-based methods.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15 (21622337) , 1558-1562
URLLC Service for Beyond Diagonal RIS-Enabled ISAC Systems: A Meta-PPO Algorithm
This letter investigates rate-splitting multiple access (RSMA)-based short-packet downlink transmission in an integrated sensing and communication (ISAC) system under channel uncertainty. Specifically, a base station (BS) provides ultra-reliable low-latency communication (URLLC) services to multiple users with the aid of a beyond-diagonal reconfigurable intelligent surface (BD-RIS), while simultaneously detecting a target in the presence of clutter. The objective is to maximize the sum rate by jointly optimizing transmit beamforming, common rate allocation, and BD-RIS reflection beamforming. To address the optimization problem, we propose a Meta proximal policy optimization (Meta-PPO) algorithm, which is a fusion of Meta-learning techniques and the PPO algorithm. Numerical results demonstrate that the proposed BD-RIS-based model outperforms the conventional RIS scheme, while the proposed Meta-PPO algorithm achieves faster convergence and superior performance compared with other deep reinforcement learning (DRL)-based methods.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5725-5729
Flexible Intelligent Metasurface in Aerial BD-RIS-Assisted Terahertz Communications System With RSMA
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 15, 5725-5729
Flexible Intelligent Metasurface in Aerial BD-RIS-Assisted Terahertz Communications System With RSMA
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 74, 14807-14824
6DMA-FIM-Enabled User-Centric Cell-Free Massive MIMO With Two-Layer RSMA
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 74, 14807-14824
6DMA-FIM-Enabled User-Centric Cell-Free Massive MIMO With Two-Layer RSMA
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network Science and Engineering
- Vol. 13, 12206-12227
STAR-RIS-Assisted 6G Service Multiplexing
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network Science and Engineering
- Vol. 13, 12206-12227
STAR-RIS-Assisted 6G Service Multiplexing