Farshad Zeinali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Farshad Zeinali has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Robat Mili
Pasargad Institute for Advanced Innovative Solutions (PIAIS), Tehran, Iran
8 shared publications - Mahdi Boloursaz Mashhadi
University of Surrey
4 shared publications - Sajad Faramarzi
School of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran
3 shared publications - Sepideh Javadi
Pasargad Institute for Advanced Innovative Solutions (PIAIS), Tehran, Iran
3 shared publications - Hosein Zarini
Department of Computer Engineering, Sharif University of Technology, Tehran, Iran
2 shared publications - Pei Xiao
University of Surrey, Guildford
2 shared publications
Latest Publications
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-6
Beamforming Design for Near-Field FIM-aided ISAC Systems: A DRL Approach
This article explores multi-target detection and multi-user communication in a near-field (NF) integrated sensing and communication (ISAC) system, where a flexible intelligent metasurface (FIM) is deployed at the base station (BS). Specifically, the BS operates in downlink mode to communicate with users and sense information from targets utilizing the FIM. The goal is to design optimal beamforming at the BS to meet both communication and sensing performance requirements. To achieve this goal, a multi-objective optimization problem is formulated, to minimize the Cramér-Rao bound while maximizing the sum rate, by jointly optimizing FIM's surface shape and transmit beamforming. To solve the resulting non-convex optimization problem, we develop a reinforcement learning (RL)-based algorithm. Simulation results demonstrate that employing FIM results in a 21% increase in sum rate.
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-6
Beamforming Design for Near-Field FIM-aided ISAC Systems: A DRL Approach
This article explores multi-target detection and multi-user communication in a near-field (NF) integrated sensing and communication (ISAC) system, where a flexible intelligent metasurface (FIM) is deployed at the base station (BS). Specifically, the BS operates in downlink mode to communicate with users and sense information from targets utilizing the FIM. The goal is to design optimal beamforming at the BS to meet both communication and sensing performance requirements. To achieve this goal, a multi-objective optimization problem is formulated, to minimize the Cramér-Rao bound while maximizing the sum rate, by jointly optimizing FIM's surface shape and transmit beamforming. To solve the resulting non-convex optimization problem, we develop a reinforcement learning (RL)-based algorithm. Simulation results demonstrate that employing FIM results in a 21% increase in sum rate.
- 16 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (4) , 6864-6869
Movable Antenna SWIPT Systems With STAR-RIS: A Meta DRL Approach
The movable antenna (MA) technology has recently demonstrated significant potential in improving the communication performance by enabling local movement of the antennas to obtain better channel conditions. Simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) has also emerged as a promising technology enabling full-space coverage by dividing incident signals into independently tunable transmitted and reflected components. In this paper, we propose a novel STAR-RIS-assisted multiuser communication system with MAs for simultaneous wireless information and power transfer (SWIPT). In order to achieve maximum sum-rate and energy harvesting efficiency, the proposed system optimizes beamforming, transmission/reflection coefficients (RCs), and MA positions simultaneously using a meta twin delay deep deterministic policy gradient (MTD3) reinforcement learning (RL) approach. The numerical results demonstrate the superiority of MTD3 over conventional baselines across various system settings, including different numbers of RIS elements, power budget, and minimum energy constraints, making it more robust and efficient for real-time resource allocation in SWIPT systems.
- 16 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (4) , 6864-6869
Movable Antenna SWIPT Systems With STAR-RIS: A Meta DRL Approach
The movable antenna (MA) technology has recently demonstrated significant potential in improving the communication performance by enabling local movement of the antennas to obtain better channel conditions. Simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) has also emerged as a promising technology enabling full-space coverage by dividing incident signals into independently tunable transmitted and reflected components. In this paper, we propose a novel STAR-RIS-assisted multiuser communication system with MAs for simultaneous wireless information and power transfer (SWIPT). In order to achieve maximum sum-rate and energy harvesting efficiency, the proposed system optimizes beamforming, transmission/reflection coefficients (RCs), and MA positions simultaneously using a meta twin delay deep deterministic policy gradient (MTD3) reinforcement learning (RL) approach. The numerical results demonstrate the superiority of MTD3 over conventional baselines across various system settings, including different numbers of RIS elements, power budget, and minimum energy constraints, making it more robust and efficient for real-time resource allocation in SWIPT systems.
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (10) , 2441-2445
Efficient Resource Allocation for RSMA-Enabled OIRS-Assisted VLC Systems With Imperfect CSI
Efficient resource allocation is essential in visible light communication (VLC) systems. This study explores the use of optical intelligent reflecting surfaces (OIRS) to enhance the data rate and overall power efficiency of VLC systems under imperfect channel state information (IPCSI), leveraging rate-splitting multiple access (RSMA) for efficient interference management. To this end, we introduce a multi-objective optimization framework to explore the fundamental trade-off between maximizing effective rate and minimizing effective power. In contrast to conventional energy efficiency (EE) approaches, the proposed framework offers flexible system design by allowing the relative importance of rate and power objectives to be adjusted through the reward function. Additionally, it encourages fair resource allocation by penalizing imbalanced rate and power distributions among receivers. We propose a robust resource allocation framework based on the critical actor asynchronous meta-advantage (MA3C) reinforcement learning (RL) algorithm. Simulation results demonstrate substantial robustness to IPCSI via MA3C. Additionally, the integration of RSMA significantly boosts the total data rate and reduces total power, outperforming other benchmarks.
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (10) , 2441-2445
Efficient Resource Allocation for RSMA-Enabled OIRS-Assisted VLC Systems With Imperfect CSI
Efficient resource allocation is essential in visible light communication (VLC) systems. This study explores the use of optical intelligent reflecting surfaces (OIRS) to enhance the data rate and overall power efficiency of VLC systems under imperfect channel state information (IPCSI), leveraging rate-splitting multiple access (RSMA) for efficient interference management. To this end, we introduce a multi-objective optimization framework to explore the fundamental trade-off between maximizing effective rate and minimizing effective power. In contrast to conventional energy efficiency (EE) approaches, the proposed framework offers flexible system design by allowing the relative importance of rate and power objectives to be adjusted through the reward function. Additionally, it encourages fair resource allocation by penalizing imbalanced rate and power distributions among receivers. We propose a robust resource allocation framework based on the critical actor asynchronous meta-advantage (MA3C) reinforcement learning (RL) algorithm. Simulation results demonstrate substantial robustness to IPCSI via MA3C. Additionally, the integration of RSMA significantly boosts the total data rate and reduces total power, outperforming other benchmarks.
- 11 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 11 (6) , 3729-3743
QoS Improvement in Multi User Cellular-Symbiotic Radio Network Assisted by Active-STAR-RIS
In this article, we employ active simultaneously transmitting and reflecting reconfigurable intelligent surfaces (ASRIS) to enhance the quality of 6G cellular network services. The network integrates commensal symbiotic radio (CSR) subsystems to facilitate communication between passive Internet of Things (IoT) users and active users, referred to as symbiotic backscatter devices (SBDs) and symbiotic user equipments (SUEs), respectively. Since the SBDs are passive, transmitting information to the SUEs poses significant challenges. To overcome this challenge, we harness the capabilities of massive multiple input multiple output (MIMO) antennas within the base station (BS) to relay the information transmitted by SBDs with greater power. This scheme uses the non-orthogonal multiple access (NOMA) technique for multiple access among all users, and potential interferences are eliminated using successive interference cancellation (SIC). The primary objective is to maximize the throughput between SBDs and SUEs. To achieve this, we formulate an optimization problem involving variables such as active beamforming coefficients at the BS and ASRIS, phase adjustments of ASRIS, and scheduling parameters between CSR and cellular networks. To solve this optimization problem, we used three deep reinforcement learning (DRL) methods: proximal policy optimization (PPO), twin delayed deep deterministic policy gradient (TD3), and asynchronous advantage actor critic (A3C). These methods were simulated, and the results demonstrate that A3C, TD3, and PPO have the best convergence speeds and achieve the highest increases in network throughput, respectively. Finally, the proposed scheme was evaluated using passive simultaneously transmitting and reflecting RIS (STAR-RIS), which demonstrated poorer performance compared to ASRIS.
- 11 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive Communications and Networking
- Vol. 11 (6) , 3729-3743
QoS Improvement in Multi User Cellular-Symbiotic Radio Network Assisted by Active-STAR-RIS
In this article, we employ active simultaneously transmitting and reflecting reconfigurable intelligent surfaces (ASRIS) to enhance the quality of 6G cellular network services. The network integrates commensal symbiotic radio (CSR) subsystems to facilitate communication between passive Internet of Things (IoT) users and active users, referred to as symbiotic backscatter devices (SBDs) and symbiotic user equipments (SUEs), respectively. Since the SBDs are passive, transmitting information to the SUEs poses significant challenges. To overcome this challenge, we harness the capabilities of massive multiple input multiple output (MIMO) antennas within the base station (BS) to relay the information transmitted by SBDs with greater power. This scheme uses the non-orthogonal multiple access (NOMA) technique for multiple access among all users, and potential interferences are eliminated using successive interference cancellation (SIC). The primary objective is to maximize the throughput between SBDs and SUEs. To achieve this, we formulate an optimization problem involving variables such as active beamforming coefficients at the BS and ASRIS, phase adjustments of ASRIS, and scheduling parameters between CSR and cellular networks. To solve this optimization problem, we used three deep reinforcement learning (DRL) methods: proximal policy optimization (PPO), twin delayed deep deterministic policy gradient (TD3), and asynchronous advantage actor critic (A3C). These methods were simulated, and the results demonstrate that A3C, TD3, and PPO have the best convergence speeds and achieve the highest increases in network throughput, respectively. Finally, the proposed scheme was evaluated using passive simultaneously transmitting and reflecting RIS (STAR-RIS), which demonstrated poorer performance compared to ASRIS.
- 3 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (5) , 8379-8384
Beamforming and Reflection Design for Short Packet ISAC With Non-Ideal RIS: An A3C-Based Approach
Integrated sensing and communication (ISAC) is a promising solution to mitigate the increasing congestion of the wireless spectrum. In this paper, we investigate the short packet communication regime within an ISAC system assisted by a reconfigurable intelligent surface (RIS) to meet the low latency ultra-reliable requirements in the next-generation wireless networks. We consider a non-ideal RIS model that captures effects of the phase-dependent amplitude variations in the reflection coefficients, and we have incorporated the near-field model into the channels between the RIS and the users or targets. In this setup, we jointly design the transmit beamforming and the RIS phase shifts to maximize the sum rate while satisfying the sensing signal-to-noise ratio (SNR) requirement. The system simultaneously carries out multitarget sensing and multi-user short packet communications with the help of the RIS. Considering the non-convex and dynamic nature of the resulting optimization problem, we propose an asynchronous advantage actor-critic (A3C) based method for beamforming and reflection design in this setup. Numerical results demonstrate the superiority of the proposed scheme over the benchmarks.
- 3 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (5) , 8379-8384
Beamforming and Reflection Design for Short Packet ISAC With Non-Ideal RIS: An A3C-Based Approach
Integrated sensing and communication (ISAC) is a promising solution to mitigate the increasing congestion of the wireless spectrum. In this paper, we investigate the short packet communication regime within an ISAC system assisted by a reconfigurable intelligent surface (RIS) to meet the low latency ultra-reliable requirements in the next-generation wireless networks. We consider a non-ideal RIS model that captures effects of the phase-dependent amplitude variations in the reflection coefficients, and we have incorporated the near-field model into the channels between the RIS and the users or targets. In this setup, we jointly design the transmit beamforming and the RIS phase shifts to maximize the sum rate while satisfying the sensing signal-to-noise ratio (SNR) requirement. The system simultaneously carries out multitarget sensing and multi-user short packet communications with the help of the RIS. Considering the non-convex and dynamic nature of the resulting optimization problem, we propose an asynchronous advantage actor-critic (A3C) based method for beamforming and reflection design in this setup. Numerical results demonstrate the superiority of the proposed scheme over the benchmarks.
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12 (8) , 9872-9888
Optical RIS-Assisted SLIPT Systems With Rate-Splitting Multiple Access
Optical wireless communication (OWC) systems with multiple light-emitting diodes (LEDs) have recently been benefited from the assistance of optical reflecting intelligent surface (ORIS) to support energy-limited devices via simultaneous lightweight information and power transfer (SLIPT). This paper studies the application of rate splitting multiple access (RSMA) for effective interference management and enhancing the data rate of these systems. Regarding the considerable bandwidth of the OWC band and also considerable energy consumption of the multi-LED transmitter, we formulate an energy efficiency (EE) maximization problem to jointly optimize the system variables, including transmit beamforming, LED selection, rate adaptation and ORIS element association, while adhering to the system requirements. Accordingly, we propose a dynamic resource allocation mechanism, leveraging proximal policy optimization (PPO) to accommodate system dynamism and optimize its variables. Concerning the frequent obstruction of OWC line-of-sight (LoS) links and consequently swift system reconfiguration, we improve the adaptability and predictability of the PPO agent by integrating Meta-learning technique. Simulations reveal that the proposed Meta-PPO algorithm has superior performance compared to the PPO method in the presence of ORIS with 76% gain. Furthermore, employing an ORIS in the proposed system model improves the performance by 51% compared to a scenario without ORIS.
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12 (8) , 9872-9888
Optical RIS-Assisted SLIPT Systems With Rate-Splitting Multiple Access
Optical wireless communication (OWC) systems with multiple light-emitting diodes (LEDs) have recently been benefited from the assistance of optical reflecting intelligent surface (ORIS) to support energy-limited devices via simultaneous lightweight information and power transfer (SLIPT). This paper studies the application of rate splitting multiple access (RSMA) for effective interference management and enhancing the data rate of these systems. Regarding the considerable bandwidth of the OWC band and also considerable energy consumption of the multi-LED transmitter, we formulate an energy efficiency (EE) maximization problem to jointly optimize the system variables, including transmit beamforming, LED selection, rate adaptation and ORIS element association, while adhering to the system requirements. Accordingly, we propose a dynamic resource allocation mechanism, leveraging proximal policy optimization (PPO) to accommodate system dynamism and optimize its variables. Concerning the frequent obstruction of OWC line-of-sight (LoS) links and consequently swift system reconfiguration, we improve the adaptability and predictability of the PPO agent by integrating Meta-learning technique. Simulations reveal that the proposed Meta-PPO algorithm has superior performance compared to the PPO method in the presence of ORIS with 76% gain. Furthermore, employing an ORIS in the proposed system model improves the performance by 51% compared to a scenario without ORIS.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (15) , 26366-26383
Meta Reinforcement Learning for Resource Allocation in Aerial Active-RIS-Assisted Networks With Rate-Splitting Multiple Access
Mounting a reconfigurable intelligent surface (RIS) on an unmanned aerial vehicle (UAV) holds promise for improving traditional terrestrial network performance. Unlike conventional methods deploying passive RIS on UAVs, this study delves into the efficacy of an aerial active RIS (AARIS). Specifically, the downlink transmission of an AARIS network is investigated, where the base station (BS) leverages rate-splitting multiple access (RSMA) for effective interference management and benefits from the support of an AARIS for jointly amplifying and reflecting the BS’s transmit signals. Considering both the non-trivial energy consumption of the active RIS and the limited energy storage of the UAV, we propose an innovative element selection strategy for optimizing the on/off status of active RIS elements, which adaptively and remarkably manages the system’s power consumption. To this end, a resource management problem is formulated, aiming to maximize the system energy efficiency (EE) by jointly optimizing the transmit beamforming at the BS, the element activation, the phase shift and the amplification factor at the active RIS, the RSMA common data rate at users, as well as the UAV’s trajectory. Due to the dynamicity nature of UAV and user mobility, a deep reinforcement learning (DRL) algorithm is designed for resource allocation, utilizing meta-learning to adaptively handle fast time-varying system dynamics. According to simulations, integrating meta-learning yields a notable 36% increase in system EE. Additionally, substituting AARIS for fixed terrestrial active RIS results in a 26% EE enhancement.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (15) , 26366-26383
Meta Reinforcement Learning for Resource Allocation in Aerial Active-RIS-Assisted Networks With Rate-Splitting Multiple Access
Mounting a reconfigurable intelligent surface (RIS) on an unmanned aerial vehicle (UAV) holds promise for improving traditional terrestrial network performance. Unlike conventional methods deploying passive RIS on UAVs, this study delves into the efficacy of an aerial active RIS (AARIS). Specifically, the downlink transmission of an AARIS network is investigated, where the base station (BS) leverages rate-splitting multiple access (RSMA) for effective interference management and benefits from the support of an AARIS for jointly amplifying and reflecting the BS’s transmit signals. Considering both the non-trivial energy consumption of the active RIS and the limited energy storage of the UAV, we propose an innovative element selection strategy for optimizing the on/off status of active RIS elements, which adaptively and remarkably manages the system’s power consumption. To this end, a resource management problem is formulated, aiming to maximize the system energy efficiency (EE) by jointly optimizing the transmit beamforming at the BS, the element activation, the phase shift and the amplification factor at the active RIS, the RSMA common data rate at users, as well as the UAV’s trajectory. Due to the dynamicity nature of UAV and user mobility, a deep reinforcement learning (DRL) algorithm is designed for resource allocation, utilizing meta-learning to adaptively handle fast time-varying system dynamics. According to simulations, integrating meta-learning yields a notable 36% increase in system EE. Additionally, substituting AARIS for fixed terrestrial active RIS results in a 26% EE enhancement.
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (9) , 14009-14014
Efficient AoI-Aware Resource Management in VLC-V2X Networks via Multi-Agent RL Mechanism
Vehicles are already fitted with light-emitting diodes (LEDs), however, with a vehicles-to-everything (V2X) network, we can integrate this potential network of visible light communication (VLC). In this paper, we explore the problem of energy efficiency (EE) and age of information (AoI) aware in a cluster-based VLC V2X system. Through cellular wireless vehicle-to-everything (C-V2X) communication technology, vehicle clusters provide cooperative awareness messages (CAMs) to their members and communicate safety-critical messages to the roadside unit (RSU). The purpose of this study is to evaluate the impact of the rising number of vehicles on EE and AoI, as well as the effect of increasing the intra-cluster gap on AoI in order to maximize EE while minimizing AoI. To solve the EE problem involving quality of service (QoS) and power constraints, we employ the multi-agent reinforcement learning (MARL) mechanism. The simulations show an acceptable improvement in the system's performance.
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (9) , 14009-14014
Efficient AoI-Aware Resource Management in VLC-V2X Networks via Multi-Agent RL Mechanism
Vehicles are already fitted with light-emitting diodes (LEDs), however, with a vehicles-to-everything (V2X) network, we can integrate this potential network of visible light communication (VLC). In this paper, we explore the problem of energy efficiency (EE) and age of information (AoI) aware in a cluster-based VLC V2X system. Through cellular wireless vehicle-to-everything (C-V2X) communication technology, vehicle clusters provide cooperative awareness messages (CAMs) to their members and communicate safety-critical messages to the roadside unit (RSU). The purpose of this study is to evaluate the impact of the rising number of vehicles on EE and AoI, as well as the effect of increasing the intra-cluster gap on AoI in order to maximize EE while minimizing AoI. To solve the EE problem involving quality of service (QoS) and power constraints, we employ the multi-agent reinforcement learning (MARL) mechanism. The simulations show an acceptable improvement in the system's performance.
- 21 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
AI-Enabled Priority and Auction-Based Spectrum Management for 6G
In this paper, we present a quality of service (QoS)-aware priority-based spectrum management scheme to guarantee the minimum required bit rate of vertical sector players (VSPs) in the 5G and beyond generation, including the 6th generation (6G). VSPs are considered as spectrum leasers to optimize the overall spectrum efficiency of the network from the perspective of the mobile network operator (MNO) as the spectrum licensee and auctioneer. We exploit a modified Vickrey-Clarke-Groves (VCG) auction mechanism to allocate the spectrum to them where the QoS and the truthfulness of bidders are considered as two important parameters for prioritization of VSPs. The simulation is done with the help of deep deterministic policy gradient (DDPG) as a deep reinforcement learning (DRL)-based algorithm. Simulation results demonstrate that deploying the DDPG algorithm results in significant advantages. In particular, the efficiency of the proposed spectrum management scheme is about %85 compared to the %35 efficiency in traditional auction methods.
- 21 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
AI-Enabled Priority and Auction-Based Spectrum Management for 6G
In this paper, we present a quality of service (QoS)-aware priority-based spectrum management scheme to guarantee the minimum required bit rate of vertical sector players (VSPs) in the 5G and beyond generation, including the 6th generation (6G). VSPs are considered as spectrum leasers to optimize the overall spectrum efficiency of the network from the perspective of the mobile network operator (MNO) as the spectrum licensee and auctioneer. We exploit a modified Vickrey-Clarke-Groves (VCG) auction mechanism to allocate the spectrum to them where the QoS and the truthfulness of bidders are considered as two important parameters for prioritization of VSPs. The simulation is done with the help of deep deterministic policy gradient (DDPG) as a deep reinforcement learning (DRL)-based algorithm. Simulation results demonstrate that deploying the DDPG algorithm results in significant advantages. In particular, the efficiency of the proposed spectrum management scheme is about %85 compared to the %35 efficiency in traditional auction methods.