PJPaxton Juuti

Paxton Juuti

*This is an algorithmically generated author record based on publicly available information.

Paxton Juuti has a total of 95 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Uronium from X-ray-Desorbed Urea Enables Sustainable Ultrasensitive Detection of Amines and Semivolatiles

    by Aleksei Shcherbinin, Henning Finkenzeller, Fariba Partovi, Netta Vinkvist, Jussi Kontro, Matthew Boyer, Joona Mikkilä, Siddharth Iyer, Jyri Mikkilä, Paxton Juuti, et al.

    Comprehensive mass spectrometric detection requires multiple ionization schemes. Chemical ionization (CI) at a low pressure is suitable for the detection of weakly polar volatile organic compounds (VOCs). Negative-mode ionization at ambient pressure delivers a superior performance for polar acidic compounds. Positive-mode CI has been explored to detect basic and polar neutral compounds for which negative polarity and low-pressure ionization techniques have shown insufficient performance. Several ion attachment reagents have been proposed for sensitive and soft ionization. These reagents are often reactive, toxic, and difficult to control, which impede their applicability and operability. Inspired by these challenges, we explored uronium, protonated urea, as an alternative for ionizing moderately oxygenated, basic, and polar neutral compounds at ambient pressure. Urea, a nontoxic solid with negligible vapor pressure, is desorbed by X-ray irradiation, forming the uronium ion. We experimentally determined the behavior of uronium ionization under different humidities for several semivolatile organic compounds (SVOCs), amines, and ammonia and explored the mechanism using theory. In laboratory measurements of α-pinene and dimethyl sulfide (DMS) oxidation systems, we characterized how uronium complements other ionization schemes. Excellent sensitivities were achieved for several key components (including amines, dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone, verbenone, and dimethylformamide (DMF)), requiring sample sizes of only a few attomoles for detection in individual spectra, equivalent to detection limits at the low to mid parts per quadrillion by volume (ppqv) level. Uronium exhibits a tendency to selectively form strong ion-molecular clusters, which renders the ionization robust against sample humidity changes. X-ray desorption of solid urea simplifies reagent supply handling and ensures the long-term stability of the ion production system, providing a safe and sustainable alternative to equivalent CI methods.


  • Open Access

    Uronium from X-ray Desorbed Solid Urea Enables Attomole Sensitivity to Amines and Semivolatiles

    by Aleksei Shcherbinin, Henning Finkenzeller, Fariba Partovi, Netta Vinkvist, Jussi Kontro, Matthew Boyer, Joona Mikkilä, Siddharth Iyer, Jyri Mikkilä, Paxton Juuti, et al.

    Comprehensive mass spectrometric detection requires multiple ionization schemes. Chemical ionization at low pressure is suitable for the detection of weakly polar volatile organic compounds (VOCs). Negative mode ionization at ambient pressure delivers superior performance for polar acidic compounds. Positive mode chemical ionization has been explored to detect basic and polar neutral compounds, for which negative polarity and low-pressure ionization techniques have shown insufficient performance. Several ion attachment reagents have been proposed for more sensitive and soft ionization. These reagents are often reactive, toxic, and difficult to control, impeding their applicability and operability. Inspired by these challenges, we explored uronium as a sensitive and robust alternative for ionizing moderately oxygenated, basic, and polar neutral compounds at ambient pressure. Urea, a non-toxic solid with negligible vapor pressure, is desorbed by X-ray irradiation, forming the uronium ion. We experimentally determined the calibration factors and behavior of uronium ionization under different humidities for several semivolatile organic compounds (SVOCs), amines, and ammonia, and explored the ionization characteristics using theory. In laboratory measurements of a-pinene and dimethyl sulfide (DMS) oxidation systems, we characterized how uronium complements other ionization schemes. Excellent sensitivities were achieved to several key components (including amines, dimethyl sulfoxide (DMSO), N-Methyl-2-pyrrolidone (NMP), verbenone and dimethylformamide (DMF)) allowing detection limits at the low to mid parts per quadrillion per volume (ppqv) level. Uronium exhibits the tendency to selectively form strong ion--molecular clusters which renders the ionization robust against sample humidity changes. X-ray desorption of solid urea enables trivial handling of the reagent supply and long-term stability of the ion production system. This represents an innovative technique with significant potential for standardization and wide applicability, demonstrating efficiency, safety, and low maintenance requirements.

  • Open Access

    Extending the Range of Detectable Trace Species with the Fast Polarity Switching of Chemical Ionization Orbitrap Mass Spectrometry

    by Runlong Cai, Joona Mikkilä, Anna Bengs, Mrisha Koirala, Jyri Mikkilä, Sebastian Holm, Paxton Juuti, Melissa Meder, Fariba Partovi, Aleksei Shcherbinin, et al.

    Chemical ionization (CI) atmospheric pressure interface mass spectrometry is a unique analytical technique for its low detection limits, softness to preserve molecular information, and selectivity for particular classes of species. Here, we present a fast polarity switching approach for highly sensitive online analysis of a wide range of trace species in complex samples using selective CI chemistries and high-resolution mass spectrometry. It is achieved by successfully coupling a multischeme chemical ionization inlet (MION) and an Orbitrap Fourier transform mass spectrometer. The capability to flexibly combine ionization chemistries from both polarities effectively extends the detectability compared to using only one ionization chemistry, as commonly used positive and negative reagent ions tend to be sensitive to different classes of species. We tested the performance of the MION-Orbitrap using reactive gaseous organic species generated by α-pinene ozonolysis in an environmental chamber and a standard mixture of 71 pesticides. Diethylammonium and nitrate are used as reagent ions in positive and negative polarities. We show that with a mass resolving power of 280,000, the MION-Orbitrap can switch and measure both polarities within 1 min, which is sufficiently fast and stable to follow the temporal evolution of reactive organic species and the thermal desorption profile of pesticides. We detected 23 of the 71 pesticides in the mixture using only nitrate as the reagent ion. Facilitated by polarity switching, we also detected 47 pesticides using diethylammonium, improving the total number of detected species to 59. For reactive organic species generated by α-pinene ozonolysis, we show that combining diethylammonium and nitrate addresses the need to measure oxygenated molecules in atmospheric environments with a wide range of oxidation states. These results indicate that the polarity switching MION-Orbitrap can promisingly serve as a versatile tool for the nontargeted chemical analysis of trace species in various applications.


  • Open Access

    Pesticide Residue Fast Screening Using Thermal Desorption Multi-Scheme Chemical Ionization Mass Spectrometry (TD-MION MS) with Selective Chemical Ionization

    by Fariba Partovi, Joona Mikkilä, Siddharth Iyer, Jyri Mikkilä, Jussi Kontro, Suvi Ojanperä, Paxton Juuti, Juha Kangasluoma, Aleksei Shcherbinin, Matti Rissanen

    In this work, thedetection characteristics of a largegroup ofcommon pesticides were investigated using a multi-scheme chemicalionization inlet (MION) with a thermal desorption unit (Karsa Ltd.)connected to an Orbitrap (Velos Pro, Thermo Fisher Scientific) massspectrometer. Standard pesticide mixtures, fruit extracts, untreatedfruit juice, and whole fruit samples were inspected. The pesticidemixtures contained 1 ng of each individual target. Altogether, 115pesticides were detected, with a set of different reagents (i.e.,dibromomethane, acetonylacetone, and water) in different polaritymodes. The measurement methodology presented was developed to minimizethe common bottlenecks originating from sample pretreatments and nonethelesswas able to retrieve 92% of the most common pesticides regularly analyzedwith standardized UHPLC-MSMS (ultra-high-performance liquidchromatography with tandem mass spectrometry) procedures. The fractionof detected targets of two standard pesticide mixtures generally quantifiedby GC-MSMS (gas chromatography with tandem mass spectrometry)methodology was much less, equaling 45 and 34%. The pineapple swabbingexperiment led to the detection of fludioxonil and diazinon belowtheir respective maximum residue levels (MRLs), whereas measurementsof untreated pineapple juice and other fruit extracts led to retrievalof dimethomorph, dinotefuran, imazalil, azoxystrobin, thiabendazole,fludioxonil, and diazinon, also below their MRL. The potential formutual detection was investigated by mixing two standard solutionsand by spiking an extract of fruit with a pesticide's solution,and subsequently, individual compounds were simultaneously detected.For a selected subgroup of compounds, the bromide (Br-) chemical ionization characteristics were further inspected usingquantum chemical computations to illustrate the structural featuresleading to their sensitive detection. Importantly, pesticides couldbe detected in actual extract and fruit samples, which demonstratesthe potential of our fast screening method.


  • Open Access

    Sub-23 nm Particles Dominate Non-Volatile Particle Number Emissions of Road Traffic

    by Henna Lintusaari, Heino Kuuluvainen, Joonas Vanhanen, Laura Salo, Harri Portin, Anssi Järvinen, Paxton Juuti, Riina Hietikko, Kimmo Teinilä, Hilkka Timonen, et al.

    Ultrafine particles (<100 nm) in urban air are a serious health hazard not yet fully understood. Therefore, particle number concentration monitoring was recently included in the WHO air quality guidelines. At present, e.g., the EU regulates particle number only regarding the emissions of solid particles larger than 23 nm emitted by vehicles. The aim of this study was to examine the non-volatile fraction of sub-23 nm particles in a traffic-influenced urban environment. We measured the number concentration of particles larger than 1.4, 3, 10, and 23 nm in May 2018. Volatile compounds were thermally removed in the sampling line and the line losses were carefully determined. According to our results, the sub-23 nm particles dominated the non-volatile number concentrations. Additionally, based on the determined particle number emission factors, the traffic emissions of non-volatile sub-10 nm particles can be even 3 times higher than those of particles larger than 10 nm. Yet, only a fraction of urban sub-10 nm particles consisted of non-volatiles. Thus, while the results highlight the role of ultrafine particles in the traffic-influenced urban air, a careful consideration is needed in terms of future particle number standards to cover the varying factors affecting measured concentrations.


  • Atmospheric pressure thermal desorption chemical ionization mass spectrometry for ultra-sensitive explosive detection

    by Juha Kangasluoma, Jyri Mikkilä, Verner Hemmilä, Oskari Kausiala, Jani Hakala, Evgenia Iakovleva, Paxton Juuti, Mikko Sipilä, Heikki Junninen, H.J. Jost, et al.


  • Silver-Decorated TiO2 Inverse Opal Structure for Visible Light-Induced Photocatalytic Degradation of Organic Pollutants and Hydrogen Evolution

    by Filipp Temerov, Khai Pham, Paxton Juuti, Jyrki M. Mäkelä, Elena V. Grachova, Santosh Kumar, Salvador Eslava, Jarkko J. Saarinen

    TiO2 inverse opal (TIO) structures were prepared by conventional wet chemical method resulting in well-formed structures for photocatalytic activity. The obtained structures were functionalized with liquid flame spray (LFS) deposited silver nanoparticles (AgNPs). The nanocomposites of TIO and AgNPs were extensively characterized by various spectroscopies such as UV, Raman, XRD, EDS, and XPS combined with microscopic methods such as SEM, TEM, and HRTEM. The characterization confirmed that high quality heterostructures had been fabricated with evenly and uniformly distributed AgNPs. Fabrication of anatase TiO2 was confirmed as well as formation of AgNPs was verified with surface plasmon resonant (SPR) properties. The photocatalytic activity results measured in gas-phase showed that deposition of AgNPs increase photocatalytic activity both under UVA and visible light excitation, moreover enhanced hydrogen evolution was demonstrated under visible light.


  • Measurement of the human respiratory tract deposited surface area of particles with an electrical low pressure impactor

    by Teemu Lepistö, Heino Kuuluvainen, Paxton Juuti, Anssi Järvinen, Anssi Arffman, Topi Rönkkö

    Particle deposition in the human respiratory tract is considered to have negative effects on human health. The lung deposited surface area (LDSA) is an important metric developed to assess the negative health effects of particles deposited in the alveolar region of the human respiratory tract. The measurement of the LDSA is frequently based on the detection of the electrical current carried by diffusion charged particles. Various conversion factors can be used to convert the electric current into LDSA concentration with relatively good accuracy up to the size about 300-600 nm. In this study, we introduce stage-specific LDSA conversion factors for electrical low pressure impactor (ELPI+) data, which enable accurate and real time LDSA concentration and LDSA size distribution measurements in the particle size range from 6 nm to 10 µm. This wide size range covers most of the alveolar deposition of particles, which has not been possible previously by electrical methods. Also, the conversion factors for tracheobronchial and head airways particle surface area deposition were determined, and the stage-specific conversion factors were compared with the single-factor data conversion method. Furthermore, the stage-specific calibration was tested against real-world particle size distributions by simulations and against laboratory-generated aerosols. Particles larger than 300 nm were observed to significantly affect the total LDSA concentration. Stage-specific conversion factors are especially required while measuring aerosols containing larger particles or when considering the surface area deposition in the tracheobronchial region and head airways. The method and the conversion factors introduced in this study can be used to monitor LDSA concentrations reliably in various environments containing particles in different size ranges.


  • Open Access

    Strategies To Diminish the Emissions of Particles and Secondary Aerosol Formation from Diesel Engines

    by Panu Karjalainen, Topi Rönkkö, Pauli Simonen, Leonidas Ntziachristos, Paxton Juuti, Hilkka Timonen, Kimmo Teinilä, Sanna Saarikoski, Henna Saveljeff, Mika Lauren, et al.

    Particle emissions and secondary aerosol formation from internal combustion engines deteriorate air quality and significantly affect human wellbeing and health. Both the direct particle emissions and the emissions of compounds contributing to secondary aerosol formation depend on choices made in selecting fuels, engine technologies, and exhaust aftertreatment (EAT). Here we study how catalytic EATs, particle filtration, and fuel choices affect these emissions concerning heavy-duty diesel engine. We observed that the most advanced EAT decreased the emissions of fresh exhaust particle mass as much as 98% (from 44.7 to 0.73 mg/kWh) and the formation of aged exhaust particle mass ∼100% (from 106.2 to ∼0 mg/kWh). The composition of emitted particles depended significantly on the EAT and oxidative aging. While black carbon typically dominated the composition of fresh exhaust particles, aged particles contained more sulfates and organics. The fuel choices had minor effects on the secondary aerosol formation, implicating that, in diesel engines, either the lubricant is a significant source of secondary aerosol precursors or the precursors are formed in the combustion process. Results indicate that the utilization of EAT in diesel engines would produce benefits with respect to exhaust burden on air quality, and thus their utilization should be promoted especially in geographical areas suffering from poor air quality.


  • Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles

    by Henna Niemelä‐Anttonen, Heli Koivuluoto, Mikko Tuominen, Hannu Teisala, Paxton Juuti, Janne Haapanen, Juha Harra, Christian Stenroos, Johanna Lahti, Jurkka Kuusipalo, et al.

    Surface engineering can be used to prevent ice accumulation and adhesion in environments that deal with icing problems. One recent engineering approach, slippery liquid infused porous surfaces (SLIPS), comprises a smooth and slippery lubricating surface, where lubricant is trapped within the pores of a solid material to repel various substances, such as water and ice. However, it remains unclear whether the slippery surfaces retain their icephobic characteristics under the impact of supercooled water droplets or repeated freezing and melting cycles. Here, the icephobic properties of SLIPS are evaluated under multiple droplet freeze–thaw and ice accretion–detachment cycles and compared to hydrophobic and superhydrophobic surfaces. The experiments are designed to mimic real environmental conditions, thus, the icephobicity is investigated in icing wind tunnel, where ice accretion occurs through the impact of supercooled water droplets. The adhesion of ice remained extremely low, <10 kPa, which is four times lower than ice adhesion onto smooth fluoropolymer surfaces, even after repeated ice accretion–detachment cycles. Moreover, cyclic droplet freeze–thaw experiments provide insight into the effects of temperature cycling on SLIPS wettability, showing stable wetting performance. The results suggest liquid infused porous surfaces as a potential solution to icephobicity under challenging and variating environmental conditions.