Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Federico Pignalberi has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Seismic Energy Partitioning Across the Continuum of Laboratory Fault Slip Modes

    by Federico Pignalberi, Giacomo Mastella, Carolina Giorgetti, Chris Marone, Marco Maria Scuderi

    Understanding the physical controls on the transition between slow and fast earthquakes remains a fundamental challenge in earthquake physics. Here we study simulated earthquake fault zones and show that both slow and fast slip can emerge under identical stress conditions. The transition between slip modes is governed by the elastodynamic interaction between the fault and its surroundings. By systematically varying fault loading stiffness at constant normal stress, we observe a continuous spectrum of slip behavior from stable sliding to slow events and ultimately fast rupture. Continuous acoustic monitoring reveals distinct seismic signatures: slow slip produces swarms of acoustic emissions, which are the equivalent of microearthquakes, while fast slip generates higher-amplitude energy bursts. We evaluate the energy release in the full range of lab earthquakes from slow to fast and find a continuous scaling of the breakdown work with seismic moment, which supports a unified physical mechanism. Moment-duration scaling highlights a key transition in energy partitioning: in slow events, acoustic energy accounts for a minor portion of slip duration, whereas in fast events it contributes a much larger portion, indicating a shift in how seismic energy is radiated across slip modes. Our results suggest that slow and fast earthquakes are not distinct phenomena but reflect end-members of a fault slip continuum.

  • Open Access

    Illuminating Fluid-Induced Fault Reactivation: Laboratory Insights into Injection-Rate Control on Slip Evolution and Seismic Nucleation

    by Federico Pignalberi, Julian Osten, Paul Selvadurai, Elena Spagnuolo, Mohammadreza Jalali, Florian Amann

    Understanding how fluid injection perturbs stressed faults and triggers induced seismicity has become an urgent challenge in geophysics and hazard mitigation. Observations from subsurface fluid injection associated with geoenergy exploitation show that variations in injection pressure and rate and injected volume can strongly modulate seismicity rates and magnitudes. Yet, comparable injection operations may result in stable creep, slow slip, or dynamic rupture, highlighting persistent gaps in our understanding of the physical processes governing fluid-driven fault reactivation.Here, we investigate fluid-induced fault reactivation through decimetric-scale laboratory experiments on granite samples containing a 45° precut fault. Experiments are conducted in a biaxial apparatus under critically stressed conditions at 3 MPa normal stress, with independent control of normal and shear stresses. Fluids are injected directly into the fault surface while fault slip is measured using fibre-optic sensors (mini-SIMFIP) installed across the fault. Seismic activity is monitored through passive acoustic emission recordings, and repeated active ultrasonic surveys are performed throughout the experiments to track wave velocity changes and map fluid diffusion along the fault.By systematically varying the injection rate, we observe a clear transition from aseismic creep to slow slip and dynamic rupture. In all cases, fault slip nucleates at the injection point and subsequently propagates within the pressurized region of the fault. High injection rates generate localized overpressure near the injection point, triggering abrupt and seismic fault reactivation. During high-rate injection, we observe a pronounced drop in P-wave velocity, indicating strong mechanical perturbation of the fault zone, followed by a progressive velocity increase as fluids diffuse along the fault. In contrast, low injection rates lead to stable, aseismic slip confined to the pressurized zone, while intermediate rates produce a progressive reactivation sequence in which slip initiates aseismically, evolves into slow slip, and eventually transitions to dynamic rupture as the pressurized region expands.Our results show that injection rate governs fault slip behavior by controlling where slip nucleates and whether it remains confined to, or propagates beyond, the pressurized zone and accelerates dynamically.

  • Open Access

    Readapting PhaseNet to Laboratory Earthquakes: AEsNet, a Robust Acoustic Emission Picker Illuminating Seismic Signatures of Different Fault Gouge Materials

    by Giacomo Mastella, Giulio Poggiali, Federico Pignalberi, Marco Scuderi

    Laboratory acoustic emissions (AEs) represent microslip events analogous to small-scale earthquakes, providing valuable insights into the mechanics of frictional instabilities. With technological advancements in acoustic monitoring, thousands of AE waveforms can now be collected in minutes of experimental time, requiring efficient methods for their detection and analysis. In this study, we introduce a deep learning model for automatically detecting AEs in laboratory shear experiments. Our dataset consists of about 30,000 manually picked AE waveforms collected under different experimental boundary conditions using two fault gouge materials: Min-U-Sil quartz gouge and glass beads. By adapting the PhaseNet model, originally developed for natural earthquake phase detection, we train AEsNet, a robust AE picker that outperforms pre-existing picking methods for the tested materials. To investigate whether trained models can generalize across different boundary conditions and materials, and overcome the limitations of small, manually labeled datasets, we apply transfer learning to analyze performance relative to training size and material diversity. Our results indicate that model performance is largely independent of experimental conditions but strongly dependent on material type. This finding suggests that direct transfer of models trained on one material to another is often ineffective due to distinct frequency characteristics of AEs, which are closely linked to the microphysical processes driving emissions in the different granular materials. However, quick fine-tuning significantly enhances pretrained AEsNet performance, even surpassing that of a fine-tuned PhaseNet model pretrained on natural earthquakes. This underscores the importance of customizing models to the specific attributes of laboratory-generated AEs—a conclusion consistent with findings from transfer learning applications in natural seismicity. In conclusion, our approach provides an efficient tool for enhancing AE detection, even with limited data from diverse laboratory conditions, enabling the creation of reliable AE catalogs that can significantly advance our understanding of fault mechanics in controlled experimental settings.


  • Open Access

    The Role of Grain Size on Shear Localization Illuminated by Acoustic Emissions

    by N. Casas, C. Giorgetti, F. Pignalberi, M. M. Scuderi

    Shear localization within the fault core, as evidenced by grain comminution in fault gouge, plays a crucial role in the initiation of frictional instabilities. To upscale the physics of shear localization and understand the influence of grain size, it is essential to identify the governing physical parameters and micro‐mechanisms. In this study, we conducted double‐direct shear experiments on quartz fault gouges with varying initial grain sizes (coarse, small, and bi‐disperse mixtures) under constant normal stress and shearing velocity, while continuously monitoring Acoustic Emissions (AE). Microstructural analyses were performed on the deformed samples to complement the mechanical and AE data. Our results reveal that, while the initial grain size and distribution do not substantially alter the steady‐state friction coefficient, they significantly influence the early stages of frictional evolution leading to a steady state, which is reflected in a different rate and amplitude of AEs. Specifically, coarse grains and bi‐disperse mixtures exhibit strain‐hardening behavior before reaching steady‐state friction, whereas fine grains show strain‐weakening behavior. Microstructural observations further indicate that bi‐disperse mixtures retard the localization of deformation with increasing fault displacement. The AE data shows a strong dependence on both the average grain size and the evolving state of the gouge layer. Notably, there is a direct correlation between b‐value evolution and the average grain size within the gouge. These findings suggest that variations in the characteristics of AE are indicative of distinct micro‐mechanisms active during different stages of shear localization, which cannot be fully captured by mechanical data and microstructural analysis alone.


  • Open Access

    Coexisting Slow-to-Fast Laboratory Earthquakes: Insights into Nucleation Processes in Fault Gouge Across Spatial Scales

    by Giacomo Mastella, Federico Pignalberi, Giuseppe Volpe, Chris Marone, Fabio Corbi, Cristiano Collettini, Carolina Giorgetti, Scuderi Marco

    Laboratory shear experiments provide valuable insights into the physical processes driving earthquakes. While the nucleation of lab earthquakes on bare rock surfaces has been extensively studied, the preparatory processes within fault gouge volumes remain poorly understood. To address this gap, we performed stick-slip experiments on a 5 × 5 cm² fault using granular quartz gouge under single and double direct shear configurations at normal stresses ranging from 40 to 50 MPa.Our experiments reproduce the full spectrum of fault slip behaviors, from stable creep to slow and fast slip events. As strain accumulates and the internal structure of the gouge evolves, seismic cycles exhibit complex sequences, often with slow-slip foreshocks preceding rapid and energetic stress drops. We studied events with slip velocities spanning nearly two orders of magnitude (0.1 to 10 mm/s), highlighting the coexistence of slow and fast slip events on the same fault under identical boundary conditions. We used eddy-current sensors to track volumetric strain during the inter- pre- and co-seismic phases. Simultaneously, acoustic emissions (AEs) were recorded at 6.25 MHz using piezoelectric sensors embedded in the loading blocks. Event detection is performed with a custom-trained deep-learning model based on the PhaseNet model developed for seismic data. The temporal evolution of AEs, coupled with waveform similarity analysis, which serves as a proxy for the spatial progression of AEs, helps to constrain the preparation and nucleation processes of slip events characterized by different velocities. Despite the continuum between slow and fast slip modes revealed by mechanical and acoustic scaling, our results show that the acoustic behavior of slow and fast slip events in a well-developed gouge fault differs. Slow-slip events are characterized by longer durations and temporally distributed swarms of small AEs, while fast-slip events exhibit shorter durations and concentrated bursts of energetic AEs. Supported by seismological estimates of AE source parameters from calibrated piezoelectric sensors, we propose a micromechanical model in which the progressive failure of asperities, signaled by increasing AE rates, drives seismic slip to a critical nucleation point—reached only for fast-slip events and not for slow-slip events. Our results are framed within the rate-and-state framework, with nonlinear time-series analysis tools used to evaluate the predictability of laboratory seismic cycles.Finally, to address the long lasting question of upscaling earthquake physical processes, we performed additional experiments on a larger 77 × 8 cm² fault at lower normal stresses with the same gouge material. High-resolution displacement and acoustic measurements in these tests provided detailed insights into the spatial evolution of slip, which can only be fully resolved with larger fault samples. This enables us to better constrain our previous results and investigate the impact of fault size on lab earthquake nucleation within the fault gouge volume, laying the foundation for upscaling laboratory observations to larger-scale experiments and, ultimately, to natural faults.

  • Open Access

    Readapting PhaseNet to Laboratory Earthquakes: AEsNet, a Robust Acoustic Emission Picker Illuminating Seismic Signatures of Different Fault Gouge Materials

    by Marco Maria Scuderi, Giulio Poggiali, Federico Pignalberi, Giacomo Mastella

    Laboratory acoustic emissions (AEs), resembling small-scale earthquakes, provide vital insights into frictional instability mechanics. Recent advancements in acoustic monitoring technology allow for the rapid collection of thousands of AE waveforms within minutes, highlighting the critical need for efficient detection and analysis methods. This study presents a deep learning model designed to automatically detect AEs in laboratory shear experiments.Our dataset comprises approximately 30,000 manually identified AE waveforms obtained under varying experimental boundary conditions using two fault gouge materials: Min-U-Sil quartz gouge and glass beads. We modified the PhaseNet model, originally designed for detecting seismic phases in natural earthquakes, by optimizing its architecture and training process to develop AEsNet—an advanced AE detection model that consistently outperforms existing picking methods for Min-U-Sil quartz gouge and glass beads.To assess the model's generalizability across different boundary conditions and materials, we employed transfer learning, examining performance relative to training dataset size and material diversity. Results indicate that while model performance remains consistent across varying boundary conditions, it is notably influenced by the specific material type due to distinct frequency characteristics inherent to each material. This sensitivity stems from the distinct frequency characteristics of AEs, reflecting the microphysical processes unique to each granular material. Consequently, models trained on one material do not transfer effectively to another.However, rapid fine-tuning of AEsNet substantially improves its performance, outperforming a similarly fine-tuned PhaseNet model pre-trained on natural earthquakes. This highlights the necessity of tailoring models to the specific features of laboratory-generated AEs, aligning with observations in transfer learning applications for natural seismicity.In summary, our deep learning approach effectively enhances AE detection across diverse laboratory settings, enabling the creation of reliable AE catalogs that deepen our understanding of fault mechanics. This advancement facilitates the development of reliable AE catalogs, significantly contributing to the understanding of fault mechanics in controlled experimental environments.

  • Open Access

    Understanding Fault Slip Modes Through AE Scaling and Seismic Partitioning

    by Federico Pignalberi, Giacomo Mastella, Carolina Giorgetti, Chris Marone, Marco Maria Scuderi

    Recent observations reveal that faults can host both slow and fast slip events, raising fundamental questions about their governing physics. Initially considered rare phenomena, slow slip events are now recognized as widespread features of fault zones, capable of releasing seismic moments comparable to large earthquakes, however, over longer time-scales.We use laboratory experiments in a double-direct shear configuration with quartz gouge to explore fault slip behavior under varying normal stresses (8–22 MPa) and loading stiffness. The experiments were conducted on the BRAVA2 biaxial deformation apparatus, which features servo-controlled loading and high-frequency acoustic emission (AE) monitoring. By varying the stiffness ratio (k/kc), defined as the ratio of system stiffness (k) to fault stiffness (kc), we reproduced a spectrum of slip behaviors.Our results reveal that the transition between slip modes is governed by the ratio (k/kc) of the loading system stiffness (k) to the fault critical stiffness (kc). We observe stable sliding when k/kc > 1.4, slow slip events clustering around k/kc ≈ 1, and fast events occurring when k/kc < 0.8, with peak slip velocities ranging from hundreds of μm/s to over 25 mm/s.These slip modes exhibit distinct seismic signatures: slow slip events produce swarms of low-amplitude AEs (M010−2 Nm). Despite differences in seismic signatures, our findings reveal continuous scaling across slip modes, with breakdown work (Wb​) scaling with slip (Wb∝δ1.47) and seismic moment (Wb∝M00.25). The key difference lies in deformation partitioning: during slow slip, AEs occur in ~0.02% of the total slip duration, defined by the time during the stress drop, while fast slip events exhibit AEs over >10% of their duration. This indicates that slow slip is dominated by aseismic processes, whereas fast slip involves more seismic energy release.Based on these observations, we suggest that slow and fast earthquakes represent end-members of a continuum. During slow slip, multiple small seismic patches develop during short inter-seismic periods, leading to distributed deformation. In contrast, fast slip events develop under longer inter-seismic periods, enabling the formation of larger, more coherent patches that fail simultaneously. This finding has important implications for understanding the spatiotemporal variations in fault slip behavior and suggests that changes in fault zone properties could trigger transitions between slip modes.


  • Open Access

    Probing Fault Zone Evolution with Ultrasonic Measurements: Seismic Imaging in Laboratory Experiments

    by Michele De Solda, Michele Mauro, Giovanni Guglielmi, Federico Pignalberi, Marco Scuderi

    Faults can slip in diverse modes, ranging from slow, aseismic creep to dynamic, earthquake-generating rupture. Geological observations reveal that many fault zones consist of localized slip zones surrounded by a broader damage zone, where microcracks and fractures interact in complex ways. Friction laws propose that whether a fault will host a slow slip event or a fast dynamic rupture depends on the relative stiffness of these slip zones and the surrounding material. Conversely, the local stress field imposes such structures' evolution. Although the evidence for these complex interactions indicates the opportunity to incorporate this knowledge in the theoretical framework, collecting data on the spatiotemporal evolution of elastic properties at seismogenic depth is inherently challenging, leaving this possibility mostly unexplored.Laboratory experiments provide a controlled environment for studying the evolution of fault mechanics and elastic properties. Elastic waves are governed by the same equations that relate wave speeds to dynamic moduli. Therefore, they offer a pathway to link laboratory observations to natural fault processes.This study investigates how microstructural reorganization during fault deformation and fault zone structure formation affects fault zone stiffness and slip behavior using synthetic quartz gouge layers sheared in double-direct shear (DDS) configuration.Our DDS setup is instrumented with piezoelectric transducers designed to generate and record predominantly compressional (P) or shear (S) waves. By carefully characterizing the source time function, we ensure that early arrivals in each recorded signal represent a single wave mode with minimal mode conversion or side reflections.We then apply Full Waveform Inversion (FWI) to these early arrivals to reconstruct velocity models for both P- and S-waves as deformation progresses. The inverted models reveal spatiotemporal variations in the bulk and shear moduli, which we interpret as signatures of contact-area changes, grain size reduction, and other micromechanical processes relevant to frictional stability. In particular, the evolving elastic properties allow us to gauge how the local stiffness of the gouge zone evolves relative to applied stress, linking the observed velocity changes to the constitutive laws underpinning rate-and-state friction (RSF). While RSF implicitly links frictional strength to contacts dynamic through a state variable, our results illustrate how ultrasonic waveform acquisition and modeling can provide hints toward the explicit rewriting of such laws in terms of the evolution of elastic properties, an intermediate level of description easier related to micromechanical processes.This approach highlights the potential for ultrasonic measurements in earthquake laboratory experiments to probe fault zone mechanics and outline a framework for integrating seismic imaging with frictional mechanics to better understand fault behavior across scales.

  • Open Access

    Slip Localization versus Instability Nucleation Feedback Loop: A Laboratory Perspective from Gouge Deformation Experiments

    by Carolina Giorgetti, Federico Pignalberi, Giacomo Mastella, Marco Maria Scuderi, Cristiano Collettini

    Experimental observations on fault gouges suggest that shear localization is a prerequisite for the nucleation of instabilities. Synthetic gouges typically produce lab-quakes when the shear deformation is localized along sharp, knife-edge shear planes – a condition that satisfies the steady-state existence requirement of the rate-and-state friction framework. Similarly, exhumed fault cores exhibit shear planes so localized that they appear as mirror surfaces.Yet, the scenario in nature is far more complex. Many faults contain multiple fault cores, multiple localized shear planes, cemented fault rocks, and evidence for fault core recycling. This suggests that deformation localized along a principal slip plane during an earthquake – unlike in controlled shear experiments – does not necessarily persist over the lifespan of a mature fault. While in laboratory gouge experiments the steady state corresponds to a microstructural fabric that does not evolve significantly over seismic cycles, fault rock fabrics in nature evolve significantly during the seismic cycle—remaining far from a simple localized steady-state fabric.Here, we present a preliminary study aiming at reconciling these two perspectives: the laboratory-derived nucleation, which involves deviations from a pre-existing steady-state, and the field-derived nucleation, often occurring far away from any steady-state condition. To address this, we conducted double-direct shear experiments on quartz gouges at 30 MPa normal stress, reactivating faults via shear stress steps that allowed spontaneous fault acceleration or deceleration.The novelty of our approach lies in (1) the different textural states imposed on the gouge before reactivation and (2) the integration of acoustic emissions monitored during fault acceleration with post-mortem microstructures. Specifically, we designed three textures: a pre-localized texture – with localized shear planes developed by prior shearing at constant velocity and normal stress of 30 MPa for a few millimeters; a homogeneous texture – compacted under a normal stress of 30 MPa without prior shearing before reactivation; and an overconsolidated homogeneous texture – compacted under normal stress of 60 MPa before reactivation at 30 MPa.Preliminary results reveal clear correlations between acoustic emission rate, slip evolution, and the degree of localization in post-mortem microstructures. Pre-localized textures remain locked until a critical stress is reached, after which they abruptly accelerate. Homogeneous textures display slow, progressive acceleration, with increasing slip velocity at higher shear stresses. The overconsolidated texture exhibits intermediate behavior. The acoustic emission signature during low constant-velocity slip reflects the grain interactions typical of granular flow, while rapid acceleration produces impulsive lab-quake-like signals typical of localized rupture nucleation.These preliminary observations suggest a feedback loop between the localization of deformation and instability growth. While this type of relationship between shear strain localization and slip rate is well-established for the co-seismic propagation phase, our observations indicate that it may play a role during the nucleation phase, challenging the steady-state assumption commonly derived from laboratory studies.

  • Open Access

    Double Direct Shear Experiments as an interacting two fault system:  insights from laboratory seismic cycles on fault interaction 

    by Giacomo Mastella, Federico Pignalberi, Carolina Giorgetti, Marco Scuderi

    Double direct shear experiments serve as established methods for delving into the physics of laboratory earthquakes. Using a biaxial shearing apparatus with dual fault configurations, these friction experiments simulate real Earth faults' behaviors during loading and failure. Despite the presence of distinct layers, double direct shear experiments are commonly perceived as a unified fault system, where the evolution of fault zone properties captured through passive or active seismic imaging can be correlated with the instantaneous stress state affecting both layers uniformly. To further explore the physics of seismic cycles generated in this setup, we perform friction experiments aiming to independently monitor the behavior of each fault layer. In our experiments, we use granular quartz (medium grain size 40 µm) to simulate fault gouge, amd we vary the normal load and shear velocity, allowing us to modify the apparatus's loading stiffness, which relies on the critical fault rheologic stiffness (kc). In the Rate-and-State framework, increasing the normal load results in an increase of kc, pushing the system towards instability, occurring when k/kc