SMStefano Malan

Stefano Malan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Stefano Malan has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Evaluation of LiDAR-Based Row Following Control for UAS Precision Spraying

    by Leonardo Nitti, Alessandro Biglia, Alessandro Sopegno, Chiara Messina, Marco Grella, Stefano Malan, Paolo Gay, Lorenzo Comba

  • Open Access

    Development of a Model-Based Coordinated Air-Fuel Controller for a 3.0 dm3 Diesel Engine and Its Assessment through Model-in-the-Loop

    by Loris Ventura, Roberto Finesso, Stefano A. Malan

    The tightening of diesel pollutant emission regulations has made Internal Combustion Engine (ICE) management through steady-state maps obsolete. To overcome the map’s scarce performance and efficiently manage the engine, control systems must cope with ICE transient operations, the coupling between its subsystem dynamics, and the tradeoff between different requirements. The work demonstrates the effectiveness of a reference generator that coordinates the air path and combustion control systems of a turbocharged heavy-duty diesel engine. The control system coordinator is based on neural networks and allows for following different engine-out Nitrogen Oxide (NOx) targets while satisfying the load request. The air path control system provides the global conditions for the correct functioning of the engine, targeting O2 concentration and pressure in the intake manifold. Through cooperation, the combustion control targets Brake Mean Effective Pressure (BMEP) and NOx to react to rapid changes in the engine operating state and compensates for the remaining deviations with respect to load and NOx targets. The reference generator and the two controller algorithms are suitable for real-time implementation on rapid-prototyping hardware. The performance overall was good, allowing the engine to follow different NOx targets with 150 ppm of deviation and to achieve an average BMEP error of 0.3 bar.


  • Intake O 2 Concentration Estimation in a Turbocharged Diesel Engine through NOE

    by Loris Ventura, Stefano Malan

    Diesel engines with their embedded control systems are becoming increasingly complex as the emission regulations tighten, especially concerning NOx pollutants. The combustion and emission formation processes are closely correlated to the intake manifold O2 concentration. Consequently, the performance of the engine controllers can be improved if a model-based or sensor-based estimation of the O2 concentration is available. The paper addresses the modeling of the O2 concentration in a turbocharged diesel engine. Dynamic models, compared to generally employed steady state maps, capture the dynamic effects occurring over transients, when the major deviations from the stationary maps are found. Dynamic models positively affect the control system making it more effective and, exploiting information coming from sensors, they provide a more robust prediction performance. Firstly, a Nonlinear Output Error model (NOE), with simulation focus, fed with four inputs is presented. The considered nonlinear function set is the one of neural networks. The inputs are engine BMEP, engine RPM and EGR and VGT valves position. Two distinct datasets are used for training and validation of the NOE model. These sets are generated using GT-Power simulation software implementing a fine model of the engine, previously validated on experimental measurements taken on the real engine. Besides the transient validation, the NOE model was tested against GT-Power outputs on step tests involving the EGR and VGT actuators. At last the network output is compared with an O2 steady state map over a transient in normal and faulty conditions. The performance of the model is satisfactory in both conditions. Secondly, the potential benefits of installing an O2 sensor in the intake manifold is presented: a Nonlinear Auto-Regressive with eXogenous input (NARX) model is considered and compared to the previously investigated NOE. The results prove that, exploiting the output coming from the O2 sensor, the model prediction capability significantly improves.


  • Air-Path Control for a Prototype PCCI Diesel Engine

    by Stefano A. Malan, Loris Ventura

    The tightening in diesel engines regulations for emissions control forced the automotive industry to face the challenge coming from these constraints. This led to an increase in the overall engine complexity, in both, mechanical and software domains. For what concerns this paper the increased complexity means to deal with and to manage the cross coupled and nonlinear behavior of the engine air-path. Here we propose a control system able to manage under steady-state conditions the airflow through the engine with the purpose of ensuring a smooth Premixed Charge Compression Ignition combustion behavior using the most simple and economical structure possible. The objective was to design a controller capable to handle the three air-path devices of Exhaust Gas Recirculation, Variable Geometry Turbochargers and flap valve all together. Modeling of the system and control design are the two main areas on which we focused our attention in order to retrieve simplicity and system economy. All the trials needed to design the air-path controller were carried out on the mono-dimensional simulation software GT-Power by Gamma Technologies that has proven to be very effective in the simulation domain. The model was created by FPT Industrial and provided to us together with the engine. Based on that model we derived all our computations, in terms of system identification and validation, that led us to a feed-forward plus feedback control structure capable to cover the whole engine operating area. Simulations show very encouraging results also in presence of high disturbances in the outputs.


  • Parameters Estimation of Hydraulic Circuit Head Losses for Virtual Sensor Design

    by Stefano Malan, Cosimo Greco, Riccardo Tisseur, Federico Bari

    This paper presents the procedure used to design a so-called virtual sensor (VS) that is able to estimate fluid flow rates (FRs) in the elements of a complex hydraulic closed network, only knowing the total FR imposed by the circulator pump and the open/closed state of the valves that section off each subnet. The VS is based on a mathematical model representing the relationship between FR and head loss (HL). An identification procedure is developed to estimate the numerical values of the parameters of the FR/HL relationship. Once the mathematical model is completely known, in terms of its topological representation and the numerical values of all the model parameters, a flow-solver algorithm is used to estimate the FR in each branch of the hydraulic circuit. The importance of such a mathematical device is evidenced by the necessity to compute the heating power, directly depending on the hydraulic FR, that each single heating body releases, in order to give a new solution going beyond the current technologies to many problems, such as, for example, the optimization of the central heat generator efficiency or the fair cost allocation in the management of old centralized heating plants. The good results obtained from different tests, carried on a reference mock-up, are presented to prove the reliability and the efficiency of the proposed approach.


  • Open Access

    The EcoThermo Project: Key and Innovative Aspects

    by F. Bari, D. Mereu, C. Damarco, C. Greco, S. Malan, G. Marchetto, S. Roa Tirado, R. Tisseur, M. Violante, G. Zangari, et al.


  • Embedded Model Control applied to mobile hydraulic systems

    by Wilber Acuna, Enrico Canuto, Stefano Malan

    This paper deals with the dynamic modeling, subsequent control design and testing of a complex electro-hydraulic system. Modeling is based on physical laws and system knowledge. The main idea is to obtain a simple and reliable model that can be used for controller synthesis and implementation. Model reduction is done by using singular perturbation concepts. The power saving task required in mobile systems, is accomplished based on the load sensing paradigm, where many loads requested at any time must be fed and the maximum load pressure is used by the controller to take corrective actions. The control structure is developed under the Embedded Model Control framework; here, the simplified obtained model is embedded inside the controller, in order to compensate the discrepancies with respect to a nominal reference trajectory produced by uncertainties, unmodeled dynamics and perturbations. The effectiveness of the obtained controller is tested by simulation experiments.


  • Power saving in mobile hydraulic systems via Embedded Model Control

    by W. Acuna-Bravo, E. Canuto, S. Malan

    This paper deals with the dynamic modelling and subsequent control design and testing of a complex electro-hydraulic system. Modelling is based on physical laws and system knowledge. The main idea is to obtain a simple and reliable model that can be used for controller synthesis and implementation. A subsequent controller design procedure is made by using the architecture of embedded model control. The effectiveness of the obtained controller is then validated by simulation experiments.

  • Fine and simplified dynamic modelling of complex hydraulic systems

    by Wilber Acuna-Bravo, Enrico Canuto, Stefano Malan, Davide Colombo, Marco Forestello, Riccardo Morselli

    This paper deals with the dynamic modelling of a complex electro-hydraulic system. Modelling is based on physical laws and the system knowledge. The main idea is to obtain a simple and reliable model that can be used for controller synthesis and implementation by using the architecture of embedded model control. Simplifications are made by taking as basis the ideas of singular perturbation. A subsequent identification procedure is made in order to acquire some important parameters, required for carrying out a simulation.