Ertugrul Aksoy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ertugrul Aksoy has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Ihsan Kanbaz
Gazi Üniversitesi
10 shared publications - Ugur Yesilyurt
Erzurum Technical University
8 shared publications - Erkan Afacan
Department of Electrical and Electronic Engineering, Faculty of Engineering, Gazi University, 06570 Ankara, Türkiye
4 shared publications - Galip Orkun Arican
Aselsan Inc
2 shared publications - Mert Karahan
Department of Electronics and Communication Engineering, Turkish Military Academy, National Defence University, 06420 Ankara, Türkiye
2 shared publications - Suleyman Kuzu
TURKSAT Company, Ankara, Turkey
2 shared publications
Latest Publications
- 19 November 2026
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- No. Advanced O
Kramers–Kronig İlişkileriyle Çok Katmanlı Metamalzemelerin Etkin Parametrelerinin Çıkarımı
Bu çalışmada, metamalzemelerin (MTM’lerin) etkin elektromanyetik parametrelerinin (etkin dielektrik geçirgenlik ε, etkin manyetik geçirgenlik µ, kırılma indisi n ve dalga empedansı z) S-parametrelerinden güvenilir ve fiziksel olarak tutarlı biçimde belirlenmesi amacıyla Kramers–Kronig (KK) ilişkilerine dayalı bütünleşik bir parametre çıkarım yaklaşımı uygulanmıştır. Geleneksel S-parametresi tabanlı yöntemlerde karmaşık logaritmanın çok değerli yapısından kaynaklanan dal belirsizliği, kırılma indisinin sanal kısmından KK ilişkileri aracılığıyla hesaplanan gerçek kırılma indisi referans alınarak giderilmiştir. Bu kapsamda etkin empedans, etkin kırılma indisi, etkin elektriksel geçirgenlik ve etkin manyetik geçirgenliğin hesaplanmasına yönelik algoritma MATLAB ve CST Microwave Studio ortamlarında gerçekleştirilmiştir. Yöntemin uygulanabilirliği, Rogers RO4003C taban malzemesi üzerine tasarlanan rezonatör yapısının birden altıya kadar değişen katman sayıları için incelenmesiyle değerlendirilmiştir. KK integralindeki sonlu frekans aralığı etkilerini azaltmak amacıyla saçılma parametreleri 0–30 GHz aralığında hesaplanmıştır. Elde edilen sonuçlar, KK tabanlı yaklaşımın fiziksel olarak uygun logaritmik dalın seçilmesini sağladığını ve frekansa göre sürekli bir kırılma indisi elde edilmesine katkıda bulunduğunu göstermektedir. Yapının elektriksel kalınlığı arttıkça birden fazla dalın izlenmesi gerektiği, optik kalınlığın dalga boyuyla karşılaştırılabilir düzeye ulaşmasıyla ortaya çıkan ve analiz aralığının genişletilmesiyle giderilemeyen süreksizliklerin ise etkin ortam yaklaşımının üst geçerlilik sınırına işaret ettiği belirlenmiştir. Ayrıca rezonans bölgesi dışında farklı katman sayılarından çıkarılan etkin parametrelerin büyük ölçüde yakınsadığı, buna karşılık rezonans bölgesinde etkin elektriksel geçirgenlik, etkin manyetik geçirgenlik ve etkin kırılma indisi değerlerinin katman sayısına bağlı olarak belirgin biçimde değiştiği gözlenmiştir. Bu davranış, rezonans bölgesinde sonlu yapı kalınlığı ile birim hücreler arasındaki uzun menzilli elektromanyetik kuplajın dikkate alınması gerektiğini ortaya koymaktadır. Sonuçlar, KK ilişkilerinin yalnızca dal belirsizliğini gidermek için değil, aynı zamanda çıkarılan etkin parametrelerin nedensellik, süreklilik ve etkin ortam geçerliliği açısından değerlendirilmesinde tamamlayıcı bir fiziksel doğrulama aracı olarak kullanılabileceğini göstermektedir.
- 19 November 2026
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- No. Advanced O
Kramers–Kronig İlişkileriyle Çok Katmanlı Metamalzemelerin Etkin Parametrelerinin Çıkarımı
Bu çalışmada, metamalzemelerin (MTM’lerin) etkin elektromanyetik parametrelerinin (etkin dielektrik geçirgenlik ε, etkin manyetik geçirgenlik µ, kırılma indisi n ve dalga empedansı z) S-parametrelerinden güvenilir ve fiziksel olarak tutarlı biçimde belirlenmesi amacıyla Kramers–Kronig (KK) ilişkilerine dayalı bütünleşik bir parametre çıkarım yaklaşımı uygulanmıştır. Geleneksel S-parametresi tabanlı yöntemlerde karmaşık logaritmanın çok değerli yapısından kaynaklanan dal belirsizliği, kırılma indisinin sanal kısmından KK ilişkileri aracılığıyla hesaplanan gerçek kırılma indisi referans alınarak giderilmiştir. Bu kapsamda etkin empedans, etkin kırılma indisi, etkin elektriksel geçirgenlik ve etkin manyetik geçirgenliğin hesaplanmasına yönelik algoritma MATLAB ve CST Microwave Studio ortamlarında gerçekleştirilmiştir. Yöntemin uygulanabilirliği, Rogers RO4003C taban malzemesi üzerine tasarlanan rezonatör yapısının birden altıya kadar değişen katman sayıları için incelenmesiyle değerlendirilmiştir. KK integralindeki sonlu frekans aralığı etkilerini azaltmak amacıyla saçılma parametreleri 0–30 GHz aralığında hesaplanmıştır. Elde edilen sonuçlar, KK tabanlı yaklaşımın fiziksel olarak uygun logaritmik dalın seçilmesini sağladığını ve frekansa göre sürekli bir kırılma indisi elde edilmesine katkıda bulunduğunu göstermektedir. Yapının elektriksel kalınlığı arttıkça birden fazla dalın izlenmesi gerektiği, optik kalınlığın dalga boyuyla karşılaştırılabilir düzeye ulaşmasıyla ortaya çıkan ve analiz aralığının genişletilmesiyle giderilemeyen süreksizliklerin ise etkin ortam yaklaşımının üst geçerlilik sınırına işaret ettiği belirlenmiştir. Ayrıca rezonans bölgesi dışında farklı katman sayılarından çıkarılan etkin parametrelerin büyük ölçüde yakınsadığı, buna karşılık rezonans bölgesinde etkin elektriksel geçirgenlik, etkin manyetik geçirgenlik ve etkin kırılma indisi değerlerinin katman sayısına bağlı olarak belirgin biçimde değiştiği gözlenmiştir. Bu davranış, rezonans bölgesinde sonlu yapı kalınlığı ile birim hücreler arasındaki uzun menzilli elektromanyetik kuplajın dikkate alınması gerektiğini ortaya koymaktadır. Sonuçlar, KK ilişkilerinin yalnızca dal belirsizliğini gidermek için değil, aynı zamanda çıkarılan etkin parametrelerin nedensellik, süreklilik ve etkin ortam geçerliliği açısından değerlendirilmesinde tamamlayıcı bir fiziksel doğrulama aracı olarak kullanılabileceğini göstermektedir.
- Open Access
- 2 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (1) , 365
Investigation of Multi-Output Single-Switch Forward Converter in Terms of Cross-Regulation Using Weighted Control Method
In a single-switch forward converter, which is a type of single-input multiple-output (SIMO) DC–DC converter, voltage changes are observed at the outputs due to the current passing through the diodes, the difficulty of winding the transformer in full and half windings, differences in resistance in the windings, the presence of leakage inductance and the existence of common inductance between the windings. These voltage changes are undesirable, and cross-regulation techniques have been developed to keep the outputs at the desired value. One of these techniques, the weighted control method, in which voltage information is received from many outputs, is addressed in this article. The reason we apply this technique is to avoid additional components and their control problems. In addition, this technique is simpler and cheaper than other cross-regulation techniques. In this way, we will contribute to the literature on cross-regulation, showing that cross-regulation remains below 3.33% and circuit efficiency reaches 86.83% by using the weighted control method.
- 2 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (1) , 365
Open AccessInvestigation of Multi-Output Single-Switch Forward Converter in Terms of Cross-Regulation Using Weighted Control Method
In a single-switch forward converter, which is a type of single-input multiple-output (SIMO) DC–DC converter, voltage changes are observed at the outputs due to the current passing through the diodes, the difficulty of winding the transformer in full and half windings, differences in resistance in the windings, the presence of leakage inductance and the existence of common inductance between the windings. These voltage changes are undesirable, and cross-regulation techniques have been developed to keep the outputs at the desired value. One of these techniques, the weighted control method, in which voltage information is received from many outputs, is addressed in this article. The reason we apply this technique is to avoid additional components and their control problems. In addition, this technique is simpler and cheaper than other cross-regulation techniques. In this way, we will contribute to the literature on cross-regulation, showing that cross-regulation remains below 3.33% and circuit efficiency reaches 86.83% by using the weighted control method.
- Open Access
- 20 May 2024
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 39 (4) , 2253-2262
Enine ışıyan düzlemsel ayrık frekanslı dizi antenlerde örüntü düzeltmede yeni bir yöntem
Bu çalışmada, düzlemsel ayrık frekanslı dizi anten sistemlerinde (Frequency Diverse Array-FDA) konformal durumlarda örüntüde meydana gelen bozulmanın düzeltilmesine yönelik yeni bir yaklaşım önerilmiştir. İlk olarak FDA sistemlerinin diğer geleneksel dizi anten sistemlerinden farklılıkları değerlendirilmiş ve literatürdeki örüntü düzeltme yöntemleri üzerinde tartışılmıştır. Ardından, harici etkenlerle uzaysal koordinatlarının değişmesi durumunda sistemin enine ışıma karakteristiğini korumak ve oluşan bozulmaları kompanze etmek için FDA sisteminin dizi faktörünün bir parametresi olan elemanlar arası frekans arttırımını güncelleme tekniği önerilmiştir. Bu parametre normalde sabittir ve merkezi frekanstan çok küçük olmalıdır. Son olarak önerilen yöntemin kullanılabilirliği nümerik örnekler aracılığıyla analiz edilmiştir.
- 20 May 2024
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 39 (4) , 2253-2262
Open AccessEnine ışıyan düzlemsel ayrık frekanslı dizi antenlerde örüntü düzeltmede yeni bir yöntem
Bu çalışmada, düzlemsel ayrık frekanslı dizi anten sistemlerinde (Frequency Diverse Array-FDA) konformal durumlarda örüntüde meydana gelen bozulmanın düzeltilmesine yönelik yeni bir yaklaşım önerilmiştir. İlk olarak FDA sistemlerinin diğer geleneksel dizi anten sistemlerinden farklılıkları değerlendirilmiş ve literatürdeki örüntü düzeltme yöntemleri üzerinde tartışılmıştır. Ardından, harici etkenlerle uzaysal koordinatlarının değişmesi durumunda sistemin enine ışıma karakteristiğini korumak ve oluşan bozulmaları kompanze etmek için FDA sisteminin dizi faktörünün bir parametresi olan elemanlar arası frekans arttırımını güncelleme tekniği önerilmiştir. Bu parametre normalde sabittir ve merkezi frekanstan çok küçük olmalıdır. Son olarak önerilen yöntemin kullanılabilirliği nümerik örnekler aracılığıyla analiz edilmiştir.
- Open Access
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 144435-144445
On the Sideband Harmonics in Pulsed Frequency Diverse Arrays
Pulsed frequency diverse arrays (FDAs) have recently garnered significant research attention in radar and sensing applications due to their range-dependent radiation properties. However, the time-dependent nature of radiation can limit the benefits of FDAs. While recent methods have been proposed to mitigate this limitation and enhance the functionality of FDAs, there is an urgent need to characterize better their radiated power profile and specifically to address the substantial power losses in the sideband harmonics. In this paper, we bridge this gap in the literature by presenting a new closed-form expression for the sideband radiated power (SRP). Additionally, we explore practical limitations outlined in the existing literature that pertain to achieving time-independent radiation concerning SRP consumption. Finally, our theoretical analysis is supported by numerical examples. A noteworthy insight from our work is that treating pulsed FDA systems as time-independent may lead to unreliable conclusions, underscoring the importance of addressing the SRP issue in future research.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 144435-144445
Open AccessOn the Sideband Harmonics in Pulsed Frequency Diverse Arrays
Pulsed frequency diverse arrays (FDAs) have recently garnered significant research attention in radar and sensing applications due to their range-dependent radiation properties. However, the time-dependent nature of radiation can limit the benefits of FDAs. While recent methods have been proposed to mitigate this limitation and enhance the functionality of FDAs, there is an urgent need to characterize better their radiated power profile and specifically to address the substantial power losses in the sideband harmonics. In this paper, we bridge this gap in the literature by presenting a new closed-form expression for the sideband radiated power (SRP). Additionally, we explore practical limitations outlined in the existing literature that pertain to achieving time-independent radiation concerning SRP consumption. Finally, our theoretical analysis is supported by numerical examples. A noteworthy insight from our work is that treating pulsed FDA systems as time-independent may lead to unreliable conclusions, underscoring the importance of addressing the SRP issue in future research.
- 11 September 2023
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 66 (1)
Dot‐shaped transmit beamforming with nonuniform time‐modulated concentric circular frequency diverse array
In this study, a true three‐dimensional dot‐shaped beamforming, in which the transmitted energy in a spatial region (azimuth, elevation, and range) is focused is performed with the nonuniform time‐modulated concentric circular frequency diverse array (NUTM‐CCFDA). The CCFDA structure with a radially outward increasing frequency offset between the rings has structural symmetry that provides the advantage of full scanning in the azimuth plane without any significant change in beam shape. Moreover, the NUTM, where the antenna elements are simply excited with a different modulation frequency in each ring, uses the in‐phase/quadrature channel modulator to realize a single sideband. The proposed NUTM‐CCFDA structure exhibits efficient beam scanning with the switch time‐on instant without using variable phase shifters to steer the dot‐shaped beam. Thus, NUTM‐CCFDA not only realizes a true dot‐shaped beam with better angle resolution on the first harmonic components but also has a simpler configuration than the conventional frequency diverse arrays with sophisticated variable frequency/phase shifters.
- 11 September 2023
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 66 (1)
Dot‐shaped transmit beamforming with nonuniform time‐modulated concentric circular frequency diverse array
In this study, a true three‐dimensional dot‐shaped beamforming, in which the transmitted energy in a spatial region (azimuth, elevation, and range) is focused is performed with the nonuniform time‐modulated concentric circular frequency diverse array (NUTM‐CCFDA). The CCFDA structure with a radially outward increasing frequency offset between the rings has structural symmetry that provides the advantage of full scanning in the azimuth plane without any significant change in beam shape. Moreover, the NUTM, where the antenna elements are simply excited with a different modulation frequency in each ring, uses the in‐phase/quadrature channel modulator to realize a single sideband. The proposed NUTM‐CCFDA structure exhibits efficient beam scanning with the switch time‐on instant without using variable phase shifters to steer the dot‐shaped beam. Thus, NUTM‐CCFDA not only realizes a true dot‐shaped beam with better angle resolution on the first harmonic components but also has a simpler configuration than the conventional frequency diverse arrays with sophisticated variable frequency/phase shifters.
- 13 January 2023
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 77 (7-8) , 357-364
Design and analysis of novel DGS-loaded low-pass filter with wide stopband
This article deals with design and development of a novel 7th order low-pass filter with defected ground structures for S-band applications. The proposed LPF structure was comprised of dumbbell shaped interdigital defected ground structures and open stubs as series inductor and shunt capacitor in the pass band. In addition, an equivalent circuit model was derived and optimized to achieve a 3-dB cut off frequency about 4 GHz with a reflection coefficient of better than −20 dB. Moreover, proposed low-pass filter was manufactured on a Rogers RO4003C substrate with a dielectric constant of 3.38, the dissipation factor of 0.0027. The developed LPF has a very flat pass-band with a transmission coefficient less than −0.5 dB and the measured transmission coefficient better than −18 dB in the passband (DC-3.6 GHz). Meanwhile, the prototype has a 20 dB harmonic suppression level in the frequency range from 5.54 GHz up to 43.5 GHz. Furthermore, the measured peak to peak group delay variation was less than 170 ps in the passband. The proposed filter has a very compact size of 195.3 mm2.
- 13 January 2023
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 77 (7-8) , 357-364
Design and analysis of novel DGS-loaded low-pass filter with wide stopband
This article deals with design and development of a novel 7th order low-pass filter with defected ground structures for S-band applications. The proposed LPF structure was comprised of dumbbell shaped interdigital defected ground structures and open stubs as series inductor and shunt capacitor in the pass band. In addition, an equivalent circuit model was derived and optimized to achieve a 3-dB cut off frequency about 4 GHz with a reflection coefficient of better than −20 dB. Moreover, proposed low-pass filter was manufactured on a Rogers RO4003C substrate with a dielectric constant of 3.38, the dissipation factor of 0.0027. The developed LPF has a very flat pass-band with a transmission coefficient less than −0.5 dB and the measured transmission coefficient better than −18 dB in the passband (DC-3.6 GHz). Meanwhile, the prototype has a 20 dB harmonic suppression level in the frequency range from 5.54 GHz up to 43.5 GHz. Furthermore, the measured peak to peak group delay variation was less than 170 ps in the passband. The proposed filter has a very compact size of 195.3 mm2.
- Open Access
- 31 December 2022
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 32 (4) , 297-303
Design and Implementation of a Textile-Based Embroidered Frequency Selective Surface
This article presents the design, fabrication and analysis of a textile-based band-stop frequency selective surface (FSS), in GSM, WiFi, LTE and WiMAX bands where the electromagnetic (EM) pollution is intense. The unit cell of the proposed FSS has been designed and simulated via a full-wave EM solver; CST Microwave Studio at the frequency of interest. In contrary to traditional FSS designs, which are printed on solid materials such as PCBs, this study presents an FSS considering a woven fabric as a substrate layer having features such as flexibility and compact weight. Two fabrication techniques have been considered one is conducted with a copper tape having a thickness of 35 µm denoted as CT FSS and the second one is conductive yarn embroidering technique denoted as CY FSS for the conducting pattern. Fabricated samples are evaluated in terms of transmission characteristics and a satisfactory agreement is obtained between CT FSS and CY FSS for both simulations and fabricated prototypes.
- 31 December 2022
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 32 (4) , 297-303
Open AccessDesign and Implementation of a Textile-Based Embroidered Frequency Selective Surface
This article presents the design, fabrication and analysis of a textile-based band-stop frequency selective surface (FSS), in GSM, WiFi, LTE and WiMAX bands where the electromagnetic (EM) pollution is intense. The unit cell of the proposed FSS has been designed and simulated via a full-wave EM solver; CST Microwave Studio at the frequency of interest. In contrary to traditional FSS designs, which are printed on solid materials such as PCBs, this study presents an FSS considering a woven fabric as a substrate layer having features such as flexibility and compact weight. Two fabrication techniques have been considered one is conducted with a copper tape having a thickness of 35 µm denoted as CT FSS and the second one is conductive yarn embroidering technique denoted as CY FSS for the conducting pattern. Fabricated samples are evaluated in terms of transmission characteristics and a satisfactory agreement is obtained between CT FSS and CY FSS for both simulations and fabricated prototypes.
- 17 January 2022
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 146, 154106
Power losses and efficiency analysis of non-uniform time modulated arrays over a ground plane
- 17 January 2022
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 146, 154106
Power losses and efficiency analysis of non-uniform time modulated arrays over a ground plane
- 12 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (4) , 3637-3647
Effect of Ground Plane on Power Losses and Efficiency for Uniform Period Time Modulated Arrays
In this paper, the analysis of the multipath characteristics of time modulated arrays (TMAs) is presented in a theoretical framework. In particular, the simple two-way propagation concept of the TMA on a perfectly conducting ground plane is investigated by evaluating horizontal and vertical polarization situations. Due to the time difference of the electromagnetic fields at the source and observation point, the effect of the propagation delay of TMAs in the far-field is taken into account. Moreover, the effect of the ground plane on critical parameters of TMAs such as radiation pattern, max sideband level (SBL), total power ( ${P}_{\textit {SR}}$ ) associated with harmonic radiation that brings power loss and the efficiency ( $\eta $ ) of the system consisting of feed network and harmonic efficiency are investigated for linear TMA positioned parallel and perpendicular to the ground plane. As a result, the power loss expression for the infinite ground plane is revised and it is shown that the ground plane changes the total efficiency.
- 12 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (4) , 3637-3647
Effect of Ground Plane on Power Losses and Efficiency for Uniform Period Time Modulated Arrays
In this paper, the analysis of the multipath characteristics of time modulated arrays (TMAs) is presented in a theoretical framework. In particular, the simple two-way propagation concept of the TMA on a perfectly conducting ground plane is investigated by evaluating horizontal and vertical polarization situations. Due to the time difference of the electromagnetic fields at the source and observation point, the effect of the propagation delay of TMAs in the far-field is taken into account. Moreover, the effect of the ground plane on critical parameters of TMAs such as radiation pattern, max sideband level (SBL), total power ( ${P}_{\textit {SR}}$ ) associated with harmonic radiation that brings power loss and the efficiency ( $\eta $ ) of the system consisting of feed network and harmonic efficiency are investigated for linear TMA positioned parallel and perpendicular to the ground plane. As a result, the power loss expression for the infinite ground plane is revised and it is shown that the ground plane changes the total efficiency.