Ihsan Kanbaz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ihsan Kanbaz has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ertugrul Aksoy
Gazi Üniversitesi
10 shared publications - Ugur Yesilyurt
Erzurum Technical University
7 shared publications - Michail Matthaiou
Queen's University Belfast
3 shared publications - Okan Yurduseven
Queen’s University Belfast
3 shared publications - Suleyman Kuzu
TURKSAT Company, Ankara, Turkey
2 shared publications Galip Orkun Arican
Department of Electrical and Electronics Engineering, Gazi University, Ankara, Turkey
1 shared publication
Latest Publications
- 19 November 2026
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- No. Advanced O
Kramers–Kronig İlişkileriyle Çok Katmanlı Metamalzemelerin Etkin Parametrelerinin Çıkarımı
Bu çalışmada, metamalzemelerin (MTM’lerin) etkin elektromanyetik parametrelerinin (etkin dielektrik geçirgenlik ε, etkin manyetik geçirgenlik µ, kırılma indisi n ve dalga empedansı z) S-parametrelerinden güvenilir ve fiziksel olarak tutarlı biçimde belirlenmesi amacıyla Kramers–Kronig (KK) ilişkilerine dayalı bütünleşik bir parametre çıkarım yaklaşımı uygulanmıştır. Geleneksel S-parametresi tabanlı yöntemlerde karmaşık logaritmanın çok değerli yapısından kaynaklanan dal belirsizliği, kırılma indisinin sanal kısmından KK ilişkileri aracılığıyla hesaplanan gerçek kırılma indisi referans alınarak giderilmiştir. Bu kapsamda etkin empedans, etkin kırılma indisi, etkin elektriksel geçirgenlik ve etkin manyetik geçirgenliğin hesaplanmasına yönelik algoritma MATLAB ve CST Microwave Studio ortamlarında gerçekleştirilmiştir. Yöntemin uygulanabilirliği, Rogers RO4003C taban malzemesi üzerine tasarlanan rezonatör yapısının birden altıya kadar değişen katman sayıları için incelenmesiyle değerlendirilmiştir. KK integralindeki sonlu frekans aralığı etkilerini azaltmak amacıyla saçılma parametreleri 0–30 GHz aralığında hesaplanmıştır. Elde edilen sonuçlar, KK tabanlı yaklaşımın fiziksel olarak uygun logaritmik dalın seçilmesini sağladığını ve frekansa göre sürekli bir kırılma indisi elde edilmesine katkıda bulunduğunu göstermektedir. Yapının elektriksel kalınlığı arttıkça birden fazla dalın izlenmesi gerektiği, optik kalınlığın dalga boyuyla karşılaştırılabilir düzeye ulaşmasıyla ortaya çıkan ve analiz aralığının genişletilmesiyle giderilemeyen süreksizliklerin ise etkin ortam yaklaşımının üst geçerlilik sınırına işaret ettiği belirlenmiştir. Ayrıca rezonans bölgesi dışında farklı katman sayılarından çıkarılan etkin parametrelerin büyük ölçüde yakınsadığı, buna karşılık rezonans bölgesinde etkin elektriksel geçirgenlik, etkin manyetik geçirgenlik ve etkin kırılma indisi değerlerinin katman sayısına bağlı olarak belirgin biçimde değiştiği gözlenmiştir. Bu davranış, rezonans bölgesinde sonlu yapı kalınlığı ile birim hücreler arasındaki uzun menzilli elektromanyetik kuplajın dikkate alınması gerektiğini ortaya koymaktadır. Sonuçlar, KK ilişkilerinin yalnızca dal belirsizliğini gidermek için değil, aynı zamanda çıkarılan etkin parametrelerin nedensellik, süreklilik ve etkin ortam geçerliliği açısından değerlendirilmesinde tamamlayıcı bir fiziksel doğrulama aracı olarak kullanılabileceğini göstermektedir.
- 19 November 2026
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- No. Advanced O
Kramers–Kronig İlişkileriyle Çok Katmanlı Metamalzemelerin Etkin Parametrelerinin Çıkarımı
Bu çalışmada, metamalzemelerin (MTM’lerin) etkin elektromanyetik parametrelerinin (etkin dielektrik geçirgenlik ε, etkin manyetik geçirgenlik µ, kırılma indisi n ve dalga empedansı z) S-parametrelerinden güvenilir ve fiziksel olarak tutarlı biçimde belirlenmesi amacıyla Kramers–Kronig (KK) ilişkilerine dayalı bütünleşik bir parametre çıkarım yaklaşımı uygulanmıştır. Geleneksel S-parametresi tabanlı yöntemlerde karmaşık logaritmanın çok değerli yapısından kaynaklanan dal belirsizliği, kırılma indisinin sanal kısmından KK ilişkileri aracılığıyla hesaplanan gerçek kırılma indisi referans alınarak giderilmiştir. Bu kapsamda etkin empedans, etkin kırılma indisi, etkin elektriksel geçirgenlik ve etkin manyetik geçirgenliğin hesaplanmasına yönelik algoritma MATLAB ve CST Microwave Studio ortamlarında gerçekleştirilmiştir. Yöntemin uygulanabilirliği, Rogers RO4003C taban malzemesi üzerine tasarlanan rezonatör yapısının birden altıya kadar değişen katman sayıları için incelenmesiyle değerlendirilmiştir. KK integralindeki sonlu frekans aralığı etkilerini azaltmak amacıyla saçılma parametreleri 0–30 GHz aralığında hesaplanmıştır. Elde edilen sonuçlar, KK tabanlı yaklaşımın fiziksel olarak uygun logaritmik dalın seçilmesini sağladığını ve frekansa göre sürekli bir kırılma indisi elde edilmesine katkıda bulunduğunu göstermektedir. Yapının elektriksel kalınlığı arttıkça birden fazla dalın izlenmesi gerektiği, optik kalınlığın dalga boyuyla karşılaştırılabilir düzeye ulaşmasıyla ortaya çıkan ve analiz aralığının genişletilmesiyle giderilemeyen süreksizliklerin ise etkin ortam yaklaşımının üst geçerlilik sınırına işaret ettiği belirlenmiştir. Ayrıca rezonans bölgesi dışında farklı katman sayılarından çıkarılan etkin parametrelerin büyük ölçüde yakınsadığı, buna karşılık rezonans bölgesinde etkin elektriksel geçirgenlik, etkin manyetik geçirgenlik ve etkin kırılma indisi değerlerinin katman sayısına bağlı olarak belirgin biçimde değiştiği gözlenmiştir. Bu davranış, rezonans bölgesinde sonlu yapı kalınlığı ile birim hücreler arasındaki uzun menzilli elektromanyetik kuplajın dikkate alınması gerektiğini ortaya koymaktadır. Sonuçlar, KK ilişkilerinin yalnızca dal belirsizliğini gidermek için değil, aynı zamanda çıkarılan etkin parametrelerin nedensellik, süreklilik ve etkin ortam geçerliliği açısından değerlendirilmesinde tamamlayıcı bir fiziksel doğrulama aracı olarak kullanılabileceğini göstermektedir.
- 30 September 2026
- Published by Firat Universitesi in Turkish Journal of Science and Technology
- Vol. 21 (2) , 589-599
On the Layout Paradox of Super-Directive Antenna Arrays
Super-directive antenna arrays (SDAAs), which rely on exploiting mutual coupling as a design parameter, have attracted considerable attention in recent years due to their ability to achieve high directivity within electrically small footprints. In many studies, extremely high directivity values are targeted by reducing the inter-element spacing and thereby strengthening mutual coupling. However, the realized gain is often overlooked in this process, which leads to a practical array layout paradox: configurations that theoretically promise higher directivity do not necessarily provide improved realized gain in practice. In this study, the aforementioned paradox is investigated by examining the feasibility of achieving super-directivity under different physical layout constraints. By imposing practical limits on the array geometry, the relationship between array compactness and achievable realized gain is systematically analyzed. A particle swarm optimization (PSO) algorithm is employed to determine the excitation coefficients that maximize the realized gain for various array configurations, and the convergence behavior of the optimization process is evaluated. In addition, the computational performance of the proposed optimization framework is compared with full-wave simulations. The results show that the developed approach can provide solutions consistent with full-wave analyses while requiring significantly less computational time.
- 30 September 2026
- Published by Firat Universitesi in Turkish Journal of Science and Technology
- Vol. 21 (2) , 589-599
On the Layout Paradox of Super-Directive Antenna Arrays
Super-directive antenna arrays (SDAAs), which rely on exploiting mutual coupling as a design parameter, have attracted considerable attention in recent years due to their ability to achieve high directivity within electrically small footprints. In many studies, extremely high directivity values are targeted by reducing the inter-element spacing and thereby strengthening mutual coupling. However, the realized gain is often overlooked in this process, which leads to a practical array layout paradox: configurations that theoretically promise higher directivity do not necessarily provide improved realized gain in practice. In this study, the aforementioned paradox is investigated by examining the feasibility of achieving super-directivity under different physical layout constraints. By imposing practical limits on the array geometry, the relationship between array compactness and achievable realized gain is systematically analyzed. A particle swarm optimization (PSO) algorithm is employed to determine the excitation coefficients that maximize the realized gain for various array configurations, and the convergence behavior of the optimization process is evaluated. In addition, the computational performance of the proposed optimization framework is compared with full-wave simulations. The results show that the developed approach can provide solutions consistent with full-wave analyses while requiring significantly less computational time.
- 20 July 2026
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 41 (2) , 785-794
Süper yönlü anten dizilerinin ışın şekillendirme uygulamalarında parazitik elemanların kullanımı
Süper-yönlü anten dizilerinin (SYAD) empedans uyumsuzluğu ve düşük verimlilik gibi temel sorunları, bu dizilerin pratik uygulamalarını sınırlamaktadır. Bu sorunlar, SYAD’ların gerçekleştirilmiş kazanç parametresini olumsuz etkileyerek, klasik anten dizilerine kıyasla sahip oldukları yüksek yönlülük avantajını gölgede bırakmaktadır. Ayrıca, SYAD’ların maksimum ışıma yönünün yalnızca uç doğrultusunda olması pratik uygulamalar için ciddi bir kısıt oluşturmaktadır. Bu çalışmada, parazitik elemanlar ve parçacık sürü optimizasyonu (PSO) kullanılarak hem gerçekleştirilmiş kazancın artırıldığı hem de ışımaların istenilen açıya yönlendirildiği yenilikçi bir anten dizi geometrisi sunulmuştur. Parazitik elemanların ışımaya etkileri matematiksel modellerle analiz edilmiş ve reaktif yüklerle ışımayı kontrol eden bir algoritma geliştirilmiştir. Ardından, üç aktif ve dört parazitik elemandan oluşan, altıgen ve T şeklinde iki farklı geometriye sahip kompakt dipol anten dizileri tasarlanmış ve analiz edilmiştir. Elektromanyetik çözücülerle gerçekleştirilen analizlerde, önerilen geometrilerin 6G ve sonrası yüksek mobilite gerektiren uygulamalarda SYAD’ların kullanımını mümkün kılabilecek önemli bir potansiyele sahip olduğu gösterilmiştir.
- 20 July 2026
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 41 (2) , 785-794
Süper yönlü anten dizilerinin ışın şekillendirme uygulamalarında parazitik elemanların kullanımı
Süper-yönlü anten dizilerinin (SYAD) empedans uyumsuzluğu ve düşük verimlilik gibi temel sorunları, bu dizilerin pratik uygulamalarını sınırlamaktadır. Bu sorunlar, SYAD’ların gerçekleştirilmiş kazanç parametresini olumsuz etkileyerek, klasik anten dizilerine kıyasla sahip oldukları yüksek yönlülük avantajını gölgede bırakmaktadır. Ayrıca, SYAD’ların maksimum ışıma yönünün yalnızca uç doğrultusunda olması pratik uygulamalar için ciddi bir kısıt oluşturmaktadır. Bu çalışmada, parazitik elemanlar ve parçacık sürü optimizasyonu (PSO) kullanılarak hem gerçekleştirilmiş kazancın artırıldığı hem de ışımaların istenilen açıya yönlendirildiği yenilikçi bir anten dizi geometrisi sunulmuştur. Parazitik elemanların ışımaya etkileri matematiksel modellerle analiz edilmiş ve reaktif yüklerle ışımayı kontrol eden bir algoritma geliştirilmiştir. Ardından, üç aktif ve dört parazitik elemandan oluşan, altıgen ve T şeklinde iki farklı geometriye sahip kompakt dipol anten dizileri tasarlanmış ve analiz edilmiştir. Elektromanyetik çözücülerle gerçekleştirilen analizlerde, önerilen geometrilerin 6G ve sonrası yüksek mobilite gerektiren uygulamalarda SYAD’ların kullanımını mümkün kılabilecek önemli bir potansiyele sahip olduğu gösterilmiştir.
- 11 June 2026
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 216
Coupling-aware modeling of time-modulated arrays with off-state termination effects
- 11 June 2026
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 216
Coupling-aware modeling of time-modulated arrays with off-state termination effects
- Open Access
- 11 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 7 (3) , 808-822
Densely Coupled, Super-Realized Gain Printed Dipole Array With Defected Ground Structures
Super-directive antenna arrays (SDAAs), conventionally designed to achieve exceptional directivity through mutual coupling, face an inherent drawback regarding their high impedance mismatch. Despite their high directivity, the considerable decline in the mismatch efficiency, which is more pronounced for a higher number of elements, has historically undermined the practical applications of such arrays. To address this limitation, our study underscores the critical necessity of striking a delicate balance between directivity and impedance mismatch efficiency in SDAAs to maintain high realized gain achieved by multi-parameter optimization. In this context, a four-element thin-wire dipole array is initially optimized using a multi-parameter differential evolution (DE) algorithm. After successfully applying this optimization via full-wave electromagnetic analysis software, we design and analyze printed versions of the optimized array. After attaining the targeted realized gain, the antenna undergoes bandwidth and sensitivity analysis, leading to fabrication and experimental verification. Consequently, both simulation and experimental results are closely matched; thus, a compact wideband printed dipole antenna array with a realized gain value of 9.5 dBi, accompanied by an exceptionally high total efficiency as 85.3%, is introduced to the literature for dense array applications, such as massive multiple-input multiple-output (MIMO), significantly enhancing the performance and feasibility of future wireless communication technologies.
- 11 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 7 (3) , 808-822
Open AccessDensely Coupled, Super-Realized Gain Printed Dipole Array With Defected Ground Structures
Super-directive antenna arrays (SDAAs), conventionally designed to achieve exceptional directivity through mutual coupling, face an inherent drawback regarding their high impedance mismatch. Despite their high directivity, the considerable decline in the mismatch efficiency, which is more pronounced for a higher number of elements, has historically undermined the practical applications of such arrays. To address this limitation, our study underscores the critical necessity of striking a delicate balance between directivity and impedance mismatch efficiency in SDAAs to maintain high realized gain achieved by multi-parameter optimization. In this context, a four-element thin-wire dipole array is initially optimized using a multi-parameter differential evolution (DE) algorithm. After successfully applying this optimization via full-wave electromagnetic analysis software, we design and analyze printed versions of the optimized array. After attaining the targeted realized gain, the antenna undergoes bandwidth and sensitivity analysis, leading to fabrication and experimental verification. Consequently, both simulation and experimental results are closely matched; thus, a compact wideband printed dipole antenna array with a realized gain value of 9.5 dBi, accompanied by an exceptionally high total efficiency as 85.3%, is introduced to the literature for dense array applications, such as massive multiple-input multiple-output (MIMO), significantly enhancing the performance and feasibility of future wireless communication technologies.
- Open Access
- 6 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 9857-9867
Differential Evolution-Based End-Fire Realized Gain Optimization of Active and Parasitic Arrays
We propose a novel approach for boosting the realized gain of arrays with enhanced directivity, utilizing both active and parasitic dipoles. The optimization process first maximizes the end-fire gain in the active array by selecting the optimal current excitation vector. For the parasitic arrays, the dipoles are reactively loaded based on the input impedances of the active dipoles, after which the optimization focuses on the inter-element distance to achieve a balance between the gain and the reflection efficiency. This multi-objective optimization, underpinned by the differential evolution (DE) algorithm, uses a simple wire dipole as the unit element. Full-wave simulations validate our theoretical results, showing that our two- and three-element parasitic arrays achieve realized gain comparable to state-of-the-art designs without relying on intricate unit elements or resource-intensive simulations, while our four- and five-element parasitic arrays yield the highest realized gain values reported in the literature. The simplicity of our approach allows optimizations to run significantly faster than full-wave simulations, whilst the sensitivity analysis showcases the robustness of the design under small deviations in loads and element positioning. Compact and power-efficient, the proposed parasitic arrays are well-suited for base stations, aligning with modern communication system requirements while minimizing hardware complexity.
- 6 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 9857-9867
Open AccessDifferential Evolution-Based End-Fire Realized Gain Optimization of Active and Parasitic Arrays
We propose a novel approach for boosting the realized gain of arrays with enhanced directivity, utilizing both active and parasitic dipoles. The optimization process first maximizes the end-fire gain in the active array by selecting the optimal current excitation vector. For the parasitic arrays, the dipoles are reactively loaded based on the input impedances of the active dipoles, after which the optimization focuses on the inter-element distance to achieve a balance between the gain and the reflection efficiency. This multi-objective optimization, underpinned by the differential evolution (DE) algorithm, uses a simple wire dipole as the unit element. Full-wave simulations validate our theoretical results, showing that our two- and three-element parasitic arrays achieve realized gain comparable to state-of-the-art designs without relying on intricate unit elements or resource-intensive simulations, while our four- and five-element parasitic arrays yield the highest realized gain values reported in the literature. The simplicity of our approach allows optimizations to run significantly faster than full-wave simulations, whilst the sensitivity analysis showcases the robustness of the design under small deviations in loads and element positioning. Compact and power-efficient, the proposed parasitic arrays are well-suited for base stations, aligning with modern communication system requirements while minimizing hardware complexity.
- Open Access
- 20 May 2024
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 39 (4) , 2253-2262
Enine ışıyan düzlemsel ayrık frekanslı dizi antenlerde örüntü düzeltmede yeni bir yöntem
Bu çalışmada, düzlemsel ayrık frekanslı dizi anten sistemlerinde (Frequency Diverse Array-FDA) konformal durumlarda örüntüde meydana gelen bozulmanın düzeltilmesine yönelik yeni bir yaklaşım önerilmiştir. İlk olarak FDA sistemlerinin diğer geleneksel dizi anten sistemlerinden farklılıkları değerlendirilmiş ve literatürdeki örüntü düzeltme yöntemleri üzerinde tartışılmıştır. Ardından, harici etkenlerle uzaysal koordinatlarının değişmesi durumunda sistemin enine ışıma karakteristiğini korumak ve oluşan bozulmaları kompanze etmek için FDA sisteminin dizi faktörünün bir parametresi olan elemanlar arası frekans arttırımını güncelleme tekniği önerilmiştir. Bu parametre normalde sabittir ve merkezi frekanstan çok küçük olmalıdır. Son olarak önerilen yöntemin kullanılabilirliği nümerik örnekler aracılığıyla analiz edilmiştir.
- 20 May 2024
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 39 (4) , 2253-2262
Open AccessEnine ışıyan düzlemsel ayrık frekanslı dizi antenlerde örüntü düzeltmede yeni bir yöntem
Bu çalışmada, düzlemsel ayrık frekanslı dizi anten sistemlerinde (Frequency Diverse Array-FDA) konformal durumlarda örüntüde meydana gelen bozulmanın düzeltilmesine yönelik yeni bir yaklaşım önerilmiştir. İlk olarak FDA sistemlerinin diğer geleneksel dizi anten sistemlerinden farklılıkları değerlendirilmiş ve literatürdeki örüntü düzeltme yöntemleri üzerinde tartışılmıştır. Ardından, harici etkenlerle uzaysal koordinatlarının değişmesi durumunda sistemin enine ışıma karakteristiğini korumak ve oluşan bozulmaları kompanze etmek için FDA sisteminin dizi faktörünün bir parametresi olan elemanlar arası frekans arttırımını güncelleme tekniği önerilmiştir. Bu parametre normalde sabittir ve merkezi frekanstan çok küçük olmalıdır. Son olarak önerilen yöntemin kullanılabilirliği nümerik örnekler aracılığıyla analiz edilmiştir.
- Open Access
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 144435-144445
On the Sideband Harmonics in Pulsed Frequency Diverse Arrays
Pulsed frequency diverse arrays (FDAs) have recently garnered significant research attention in radar and sensing applications due to their range-dependent radiation properties. However, the time-dependent nature of radiation can limit the benefits of FDAs. While recent methods have been proposed to mitigate this limitation and enhance the functionality of FDAs, there is an urgent need to characterize better their radiated power profile and specifically to address the substantial power losses in the sideband harmonics. In this paper, we bridge this gap in the literature by presenting a new closed-form expression for the sideband radiated power (SRP). Additionally, we explore practical limitations outlined in the existing literature that pertain to achieving time-independent radiation concerning SRP consumption. Finally, our theoretical analysis is supported by numerical examples. A noteworthy insight from our work is that treating pulsed FDA systems as time-independent may lead to unreliable conclusions, underscoring the importance of addressing the SRP issue in future research.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 144435-144445
Open AccessOn the Sideband Harmonics in Pulsed Frequency Diverse Arrays
Pulsed frequency diverse arrays (FDAs) have recently garnered significant research attention in radar and sensing applications due to their range-dependent radiation properties. However, the time-dependent nature of radiation can limit the benefits of FDAs. While recent methods have been proposed to mitigate this limitation and enhance the functionality of FDAs, there is an urgent need to characterize better their radiated power profile and specifically to address the substantial power losses in the sideband harmonics. In this paper, we bridge this gap in the literature by presenting a new closed-form expression for the sideband radiated power (SRP). Additionally, we explore practical limitations outlined in the existing literature that pertain to achieving time-independent radiation concerning SRP consumption. Finally, our theoretical analysis is supported by numerical examples. A noteworthy insight from our work is that treating pulsed FDA systems as time-independent may lead to unreliable conclusions, underscoring the importance of addressing the SRP issue in future research.
- 13 January 2023
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 77 (7-8) , 357-364
Design and analysis of novel DGS-loaded low-pass filter with wide stopband
This article deals with design and development of a novel 7th order low-pass filter with defected ground structures for S-band applications. The proposed LPF structure was comprised of dumbbell shaped interdigital defected ground structures and open stubs as series inductor and shunt capacitor in the pass band. In addition, an equivalent circuit model was derived and optimized to achieve a 3-dB cut off frequency about 4 GHz with a reflection coefficient of better than −20 dB. Moreover, proposed low-pass filter was manufactured on a Rogers RO4003C substrate with a dielectric constant of 3.38, the dissipation factor of 0.0027. The developed LPF has a very flat pass-band with a transmission coefficient less than −0.5 dB and the measured transmission coefficient better than −18 dB in the passband (DC-3.6 GHz). Meanwhile, the prototype has a 20 dB harmonic suppression level in the frequency range from 5.54 GHz up to 43.5 GHz. Furthermore, the measured peak to peak group delay variation was less than 170 ps in the passband. The proposed filter has a very compact size of 195.3 mm2.
- 13 January 2023
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 77 (7-8) , 357-364
Design and analysis of novel DGS-loaded low-pass filter with wide stopband
This article deals with design and development of a novel 7th order low-pass filter with defected ground structures for S-band applications. The proposed LPF structure was comprised of dumbbell shaped interdigital defected ground structures and open stubs as series inductor and shunt capacitor in the pass band. In addition, an equivalent circuit model was derived and optimized to achieve a 3-dB cut off frequency about 4 GHz with a reflection coefficient of better than −20 dB. Moreover, proposed low-pass filter was manufactured on a Rogers RO4003C substrate with a dielectric constant of 3.38, the dissipation factor of 0.0027. The developed LPF has a very flat pass-band with a transmission coefficient less than −0.5 dB and the measured transmission coefficient better than −18 dB in the passband (DC-3.6 GHz). Meanwhile, the prototype has a 20 dB harmonic suppression level in the frequency range from 5.54 GHz up to 43.5 GHz. Furthermore, the measured peak to peak group delay variation was less than 170 ps in the passband. The proposed filter has a very compact size of 195.3 mm2.