AOAlexandros T. Oratis

Alexandros T. Oratis

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alexandros T. Oratis has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Diffusion from particle-coated drops: The subtle role of particle size

    by Alexandros T. Oratis, Matteo Camagna, Timo J. J. M. van Overveld, Valeria Garbin

    Many natural and industrial systems involve particle-laden interfaces. Because interfacial particles prevent the coalescence and coarsening of drops, they hold promise for various applications requiring stable emulsions. Despite their remarkable ability to stabilize emulsions, it remains challenging to characterize how particles influence the interfacial transport of dissolved solutes. Here we quantify the diffusion from a single particle-coated drop by confining it to a two-dimensional configuration. Using fluorescence microscopy, we extract the intensity profiles of the fluorescent dye as it diffuses from the drop, yielding spatiotemporal measurements of the concentration field. Over a range of particle sizes, the particles impose minimal resistance to diffusion. We explain this behavior with a mathematical model describing interfacial mass transfer across a particle-coated interface. The particle monolayer controls the temporal dynamics of interfacial flux, but hinders the overall transport only at extreme coverage fractions beyond the close-packing limit. This framework reveals why particles often fail to hinder diffusion, offering new pathways to harness mass transfer in particle-stabilized emulsions.

  • Open Access

    Ultrafast heating with plasmonic nanoparticles: A scaling analysis of particle, interface and medium effects

    by Begum Yilmaz, Alexandros T. Oratis, Elizabeth M. Thomas, Lassi V. Tiihonen, Arjan J. Houtepen, Monique A. van der Veen

    Metal nanoparticles strongly absorb light at their localized surface plasmon resonance (LSPR). The absorbed energy generates plasmons under femtosecond excitation, which decay and lead to ultrafast heating of the particles. Thus, these materials can be utilized as nanoheaters to increase the temperature of their local environment on picosecond to nanosecond timescales. The temperature increase of the surrounding medium, as well as their cooling timescales are governed by several factors. These include excitation conditions, the optical and thermal properties of both the metal and the medium, as well as the nature of the interface. Despite extensive studies, particularly on interfacial effects in heat transfer dynamics, a framework linking these experimental parameters to key system descriptors such as the particle temperature decay time and the temperature increase in the medium is lacking. Here, we address this issue by identifying the governing parameters controlling heat transfer rates via a scaling analysis using a continuum heat transfer model. We use transient absorption (TA) spectroscopy to probe ultrafast heating in colloidal gold nanoparticles in a liquid solution. We experimentally obtain temperature profiles of both the particles and the medium and determine the interface thermal conductance (ITC), G. The scaling analysis reveals distinct regimes limited by interface thermal conductance or thermal diffusion in the medium. We demonstrate a shift from an interfacial effects dominated heat transfer regime to a thermal diffusion dominated regime by changing particle size, surface ligands, and the surrounding medium. This way, we show that a simple scaling approach captures the tunability of the particle cooling timescales and temperature increases in the medium based on experimental parameters. This provides a basis for rational parameter selection. The approach can be extended to different materials, particle sizes and shapes, and surrounding media under transient heating conditions.

  • How elasticity affects bubble pinch-off

    by Coen I. Verschuur, Alexandros T. Oratis, Vatsal Sanjay, Jacco H. Snoeijer


  • Top Cited Papers
    Open Access

    Viscoelastic Worthington jets and droplets produced by bursting bubbles

    by Ayush Dixit, Alexandros Oratis, Konstantinos Zinelis, Detlef Lohse, Vatsal Sanjay

    Bubble bursting and subsequent collapse of the open cavity at free surfaces of contaminated liquids can generate aerosol droplets, facilitating pathogen transport. After film rupture, capillary waves focus at the cavity base, potentially generating fast Worthington jets that are responsible for ejecting the droplets away from the source. While extensively studied for Newtonian fluids, the influence of non-Newtonian rheology on this process remains poorly understood. Here, we employ direct numerical simulations to investigate the bubble cavity collapse in viscoelastic media, such as polymeric liquids. We find that the jet and drop formations are dictated by two dimensionless parameters: the elastocapillary number $Ec$ (the ratio of the elastic modulus and the Laplace pressure) and the Deborah number $De$ (the ratio of the relaxation time and the inertio-capillary time scale). We show that, for low values of $Ec$ and $De$ , the viscoelastic liquid adopts a Newtonian-like behaviour, where the dynamics is governed by the solvent Ohnesorge number $Oh_s$ (the ratio of visco-capillary and inertio-capillary time scales). In contrast, for large values $Ec$ and $De$ , the enhanced elastic stresses completely suppress the formation of the jet. For some cases with intermediate values of $Ec$ and $De$ , smaller droplets are produced compared with Newtonian fluids, potentially enhancing aerosol dispersal. By mapping the phase space spanned by $Ec$ , $De$ and $Oh_s$ , we reveal three distinct flow regimes: (i) jets forming droplets, (ii) jets without droplet formation and (iii) absence of jet formation. Our results elucidate the mechanisms underlying aerosol suppression versus fine spray formation in polymeric liquids, with implications for pathogen transmission and industrial processes involving viscoelastic fluids.


  • Open Access

    Sticking without Contact: Elastohydrodynamic Adhesion

    by Vincent Bertin, Alexandros Oratis, Jacco H. Snoeijer

    The adhesion between dry solid surfaces is typically governed by contact forces, involving surface forces and elasticity. For surfaces immersed in a fluid, out-of-contact adhesion arises due to the viscous resistance to the opening of the liquid gap. While the adhesion between dry solids is described by the classical Johnson-Kendall-Roberts (JKR) theory, there is no equivalent framework for the wet adhesion of soft solids. Here, we investigate theoretically the viscous adhesion emerging during the separation of a sphere from an elastic substrate. The suction pressure within the thin viscous film between the solids induces significant elastic displacements. Unexpectedly, the elastic substrate closely follows the motion of the sphere, leading to a sticking without contact. The initial dynamics is described using similarity solutions, resulting in a nonlinear adhesion force that grows in time as F ∝ t 2 / 3 . When elastic displacements become large enough, another similarity solution emerges that leads to a violent snap-off of the adhesive contact through a finite-time singularity. The observed phenomenology bears a strong resemblance with JKR theory and is relevant for a wide range of applications involving viscous adhesion.


  • Open Access

    Viscoelastic lubrication of a submerged cylinder sliding down an incline

    by A. T. Oratis, K. van Den Berg, V. Bertin, J. H. Snoeijer

    Lubrication flows between two solid surfaces can be found in a variety of biological and engineering settings. In many of these systems, the lubricant exhibits viscoelastic properties, which modify the associated lubrication forces. Here, we experimentally study viscoelastic lubrication by considering the motion of a submerged cylinder sliding down an incline. We demonstrate that cylinders move faster when released in a viscoelastic Boger liquid compared to a Newtonian liquid with similar viscosity. Cylinders exhibit pure sliding motion in viscoelastic liquids, in contrast to the stick-slip motion observed in Newtonian liquids. We rationalize our results by using the second-order fluid model, which predicts a lift force on the cylinder arising from the normal-stress differences. The interplay between viscoelastic lift, viscous friction, and gravity leads to a prediction for the sliding speed, which is consistent with our experimental results for weakly viscoelastic flows. Finally, we identify a remarkable difference between the lubrication of cylindrical and spherical contacts, as the latter do not exhibit any lift for weak viscoelasticity.


  • Open Access

    A unifying Rayleigh-Plesset-type equation for bubbles in viscoelastic media

    by Alexandros T. Oratis, Kay Dijs, Guillaume Lajoinie, Michel Versluis, Jacco H. Snoeijer

    Understanding the ultrasound pressure-driven dynamics of microbubbles confined in viscoelastic materials is relevant for multiple biomedical applications, ranging from contrast-enhanced ultrasound imaging to ultrasound-assisted drug delivery. The volumetric oscillations of spherical bubbles are analyzed using the Rayleigh-Plesset equation, which describes the conservation of mass and momentum in the surrounding medium. Several studies have considered an extension of the Rayleigh-Plesset equation for bubbles embedded into viscoelastic media, but these are restricted to a particular choice of constitutive model and/or to small deformations. Here, we derive a unifying equation applicable to bubbles in viscoelastic media with arbitrary complex moduli and that can account for large bubble deformations. To derive this equation, we borrow concepts from finite-strain theory. We validate our approach by comparing the result of our model to previously published results and extend it to show how microbubbles behave in arbitrary viscoelastic materials. In particular, we use our viscoelastic Rayleigh-Plesset model to compute the bubble dynamics in benchmarked viscoelastic liquids and solids.


  • Coalescence of bubbles in a viscoelastic liquid

    by Alexandros T. Oratis, Vincent Bertin, Jacco H. Snoeijer

    When two bubbles submerged in a liquid are brought closely together, the intermediate liquid film separating the bubbles begins to drain. Once the film ruptures, the bubbles coalesce and form a neck that expands with time. The dynamics of the neck growth are well understood in the context of pure, Newtonian liquids. Yet much less is known about the dynamics of this singularity when the surrounding liquid contains long flexible polymers, which provide viscoelastic characteristics to the liquid's properties. Here we experimentally study the coalescence of bubbles surrounded by polymer solutions. In contrast to drop coalescence, and in spite of the singular stretching of polymers, we find that the presence of the dissolved polymers does not at all affect the coalescence dynamics at early times. The polymer elasticity is found to slow down the flow only during the later stages of coalescence. These observations are interpreted using an asymptotic solution of the Oldroyd-B model, which predicts a strong stress singularity near the extremity of the neck. However, the polymer stress turns out to diverge only in the azimuthal direction, which can explain why elastic effects remain subdominant during the initial stages of coalescence.


  • Open Access

    Universal non-monotonic drainage in large bare viscous bubbles

    by Casey Bartlett, Alexandros T. Oratis, Matthieu Santin, James C. Bird

    Bubbles will rest at the surface of a liquid bath until their spherical cap drains sufficiently to spontaneously rupture. For large film caps, the memory of initial conditions is believed to be erased due to a visco-gravitational flow, whose velocity increases from the top of the bubble to its base. Consequently, the film thickness has been calculated to be relatively uniform as it thins, regardless of whether the drainage is regulated by shear or elongation. Here, we demonstrate that for large bare bubbles, the film thickness is highly nonuniform throughout drainage, spanning orders of magnitude from top to base. We link the film thickness profile to a universal non-monotonic drainage flow that depends on the bubble thinning rate. These results highlight an unexpected coupling between drainage velocity and bubble thickness profiles and provide critical insight needed to understand the retraction and breakup dynamics of these bubbles upon rupture.


  • Open Access

    Viscous wrinkling of nonuniform sheets

    by Oliver McRae, Alexandros T. Oratis, James C. Bird

    This paper is associated with a poster winner of a 2020 American Physical Society's Division of Fluid Dynamics (DFD) Milton van Dyke Award for work presented at the DFD Gallery of Fluid Motion. The original poster is available online at the Gallery of Fluid Motion, https://doi.org/10.1103/APS.DFD.2020.GFM.P0027.