Juan S. Cely
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Juan S. Cely has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Roque Saltaren
Centro de Automática y Robótica, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal 2, 28006 Madrid, Spain
13 shared publications - Alejandro Rodriguez-Barroso
University of Granada
7 shared publications - Marco Carpio
Universidad Politcnica Salesiana,Grupo de Investigacin en Interaccin, Robtica y Automtica (GIIRA),Cuenca,Ecuador
7 shared publications - Gerardo Portilla
Centro de Automática y Robótica, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal 2, 28006 Madrid, Spain
6 shared publications - Oz Yakrangi
Centro de Automática y Robótica, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal 2, 28006 Madrid, Spain
5 shared publications - Cecilia Elisabet García Cena
Escuela Técnica Superior de Ingeniería y Diseño Industrial, Universidad Politécnica de Madrid, Ronda de Valencia, 3, 28012 Madrid, Spain
4 shared publications
Latest Publications
- Open Access
Mobile Robot Localization and SLAM: A Critical Review of Sensors, Multi-Sensor Fusion, and Neural Representations
Accurate and robust localization remains the fundamental bottleneck for truly autonomous robotic systems, despite decades of progress in probabilistic estimation and SLAM. This paper provides a critical and comprehensive review of mobile robot localization across sensing modalities, estimation paradigms, and deployment domains, covering ground, aerial, and underwater platforms. Beyond a descriptive survey, we explicitly analyze the limitations and trade-offs of existing approaches. We introduce an updated taxonomy that spans classical proprioceptive and exteroceptive sensors, emerging technologies such as 4D imaging radar and event cameras, and infrastructure-based positioning systems including GNSS and Ultra-Wideband. We revisit the evolution of localization algorithms, from Bayesian filtering techniques (EKF, UKF, and particle filters) to modern graph-based SLAM frameworks and tightly coupled multi-sensor fusion systems. Particular emphasis is placed on the recent paradigm shift toward learning-based and neural implicit approaches, including NeRF-SLAM and Gaussian Splatting, highlighting both their transformative potential and their current impracticality for real-time deployment. Unlike previous surveys, this work provides a unified cross-domain perspective while critically examining scalability, robustness, computational cost, and real-world deployability. We identify key unresolved challenges, including long-term consistency, operation in degraded environments, and the integration of semantic understanding into localization pipelines. Furthermore, we propose standardizing evaluation metrics with a formal Trajectory Completeness formulation to expose tracking brittleness. Finally, we outline future research directions toward resilient, certifiable, and truly autonomous localization systems, emphasizing the critical transition from passive estimation to Active SLAM in unstructured environments.
Open AccessMobile Robot Localization and SLAM: A Critical Review of Sensors, Multi-Sensor Fusion, and Neural Representations
Accurate and robust localization remains the fundamental bottleneck for truly autonomous robotic systems, despite decades of progress in probabilistic estimation and SLAM. This paper provides a critical and comprehensive review of mobile robot localization across sensing modalities, estimation paradigms, and deployment domains, covering ground, aerial, and underwater platforms. Beyond a descriptive survey, we explicitly analyze the limitations and trade-offs of existing approaches. We introduce an updated taxonomy that spans classical proprioceptive and exteroceptive sensors, emerging technologies such as 4D imaging radar and event cameras, and infrastructure-based positioning systems including GNSS and Ultra-Wideband. We revisit the evolution of localization algorithms, from Bayesian filtering techniques (EKF, UKF, and particle filters) to modern graph-based SLAM frameworks and tightly coupled multi-sensor fusion systems. Particular emphasis is placed on the recent paradigm shift toward learning-based and neural implicit approaches, including NeRF-SLAM and Gaussian Splatting, highlighting both their transformative potential and their current impracticality for real-time deployment. Unlike previous surveys, this work provides a unified cross-domain perspective while critically examining scalability, robustness, computational cost, and real-world deployability. We identify key unresolved challenges, including long-term consistency, operation in degraded environments, and the integration of semantic understanding into localization pipelines. Furthermore, we propose standardizing evaluation metrics with a formal Trajectory Completeness formulation to expose tracking brittleness. Finally, we outline future research directions toward resilient, certifiable, and truly autonomous localization systems, emphasizing the critical transition from passive estimation to Active SLAM in unstructured environments.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 110462-110472
I Move Therefore I Learn: Experience-Based Traversability in Outdoor Robotics
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 110462-110472
Open AccessI Move Therefore I Learn: Experience-Based Traversability in Outdoor Robotics
- Open Access
Non-Invasive Position Measurement of a Spatial Pendulum Using Infrared Distance Sensors
For the study and experimentation of physical systems, it is essential to measure the physical variables, which implies choosing the most convenient method that does not affect the natural behavior of the system. This work presents the modeling and sensing of the spherical pendulum, integrating a novel non-invasive measurement scheme based on infrared sensors arranged in a quadrature configuration. The proposed method enables the estimation of angles around two axes, leveraging light reflection on a perpendicular plane aligned with the pendulum bar. A mathematical model was developed to create simulations, and a prototype was constructed to perform experiments and validate the detection method. The values recorded by the sensors enable the reproduction of the pendulum’s trajectory, allowing for the correlation of real results with those of the simulations. The similarity of behavior between the simulations and the experimentation facilitates the validation of the proposal.
Open AccessNon-Invasive Position Measurement of a Spatial Pendulum Using Infrared Distance Sensors
For the study and experimentation of physical systems, it is essential to measure the physical variables, which implies choosing the most convenient method that does not affect the natural behavior of the system. This work presents the modeling and sensing of the spherical pendulum, integrating a novel non-invasive measurement scheme based on infrared sensors arranged in a quadrature configuration. The proposed method enables the estimation of angles around two axes, leveraging light reflection on a perpendicular plane aligned with the pendulum bar. A mathematical model was developed to create simulations, and a prototype was constructed to perform experiments and validate the detection method. The values recorded by the sensors enable the reproduction of the pendulum’s trajectory, allowing for the correlation of real results with those of the simulations. The similarity of behavior between the simulations and the experimentation facilitates the validation of the proposal.
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
The Effective Action of Cables During the Rotation of the End Effector in a Planar CDPR
Their large positioning workspace characterizes the cable-driven parallel robots (CDPR). However, the orientation that the end effector can develop presents limitations that depend on the configuration of the cables in its fixed structure, such as in its mobile structure. These limitations may be geometric, related to the limit prior to cable entanglement, or physical limitations related to the forces the cables exert to reach the required orientation. As the orientation develops, the cables must change the magnitude of the action, and in some instances, some of them must stop acting or failing that, they must begin to act if they did not do so before; in this way, the joint action of all will allow rotating the end effector (EE) of the robot towards a proposed value. In this work, a strategy is proposed to geometrically identify the effective action (corresponding to the sign of the control signal for each cable) that each robot cable must execute while the rotation of the EE is developing. The simulations are carried out in MATLAB, with Simulink and Simscape, the results of which have allowed us to verify the effectiveness of the proposal, making the rotation of the end effector more flexible with a notably better performance compared to a traditional rigid proposal that does not consider an instantaneous analysis of the condition of rotation of the EE.
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
The Effective Action of Cables During the Rotation of the End Effector in a Planar CDPR
Their large positioning workspace characterizes the cable-driven parallel robots (CDPR). However, the orientation that the end effector can develop presents limitations that depend on the configuration of the cables in its fixed structure, such as in its mobile structure. These limitations may be geometric, related to the limit prior to cable entanglement, or physical limitations related to the forces the cables exert to reach the required orientation. As the orientation develops, the cables must change the magnitude of the action, and in some instances, some of them must stop acting or failing that, they must begin to act if they did not do so before; in this way, the joint action of all will allow rotating the end effector (EE) of the robot towards a proposed value. In this work, a strategy is proposed to geometrically identify the effective action (corresponding to the sign of the control signal for each cable) that each robot cable must execute while the rotation of the EE is developing. The simulations are carried out in MATLAB, with Simulink and Simscape, the results of which have allowed us to verify the effectiveness of the proposal, making the rotation of the end effector more flexible with a notably better performance compared to a traditional rigid proposal that does not consider an instantaneous analysis of the condition of rotation of the EE.
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Robotic System Based on a Universal Joint Actuated by Two Cables Applied to the Orientation of Photovoltaic Panels
Universal joints are fundamental components in mechanical engineering and robotics, as they connect different parts of the system and transmit motion in multiple directions. Traditionally, universal joints have been passive, but in recent years, interest has grown in making them active to achieve greater control over movement. This research proposes and analyzes a new alternative for an active universal joint, involving a cable and a motor for each axis of the joint in a similar geometric arrangement for each joint variable, which allows its scalability without compromising its internal functionality. Mathematical analyses of the cable behavior and the direct kinematics of the proposed system are carried out. Finally, the practical functionality is evidenced through a prototype, demonstrating its usefulness in a two axis tracking application for photovoltaic generation systems. The results and conclusions describe its advantages and limitations, which can be explored in future studies.
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Robotic System Based on a Universal Joint Actuated by Two Cables Applied to the Orientation of Photovoltaic Panels
Universal joints are fundamental components in mechanical engineering and robotics, as they connect different parts of the system and transmit motion in multiple directions. Traditionally, universal joints have been passive, but in recent years, interest has grown in making them active to achieve greater control over movement. This research proposes and analyzes a new alternative for an active universal joint, involving a cable and a motor for each axis of the joint in a similar geometric arrangement for each joint variable, which allows its scalability without compromising its internal functionality. Mathematical analyses of the cable behavior and the direct kinematics of the proposed system are carried out. Finally, the practical functionality is evidenced through a prototype, demonstrating its usefulness in a two axis tracking application for photovoltaic generation systems. The results and conclusions describe its advantages and limitations, which can be explored in future studies.
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Effects of the Thrusters Orientation in the Displacement of the Underwater Robot UDrobot: Design and Experimentation
Underwater robots need a number of thrusters to perform their movements. However, there are movements that require another type of actuator, otherwise the thrusters must replace it. Verifying the correct orientation of the thrusters in a robot of this type allows choosing the orientation that best benefits the robot's movement. Four different tests were performed where vertical forces and torques were applied to be exerted by the robot, capturing depth values and the orientation of the robot's pose, each test with a different angle of inclination of the thrusters. The angle that achieved the best results was the angle of -5 degrees with respect to the vertical.
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Effects of the Thrusters Orientation in the Displacement of the Underwater Robot UDrobot: Design and Experimentation
Underwater robots need a number of thrusters to perform their movements. However, there are movements that require another type of actuator, otherwise the thrusters must replace it. Verifying the correct orientation of the thrusters in a robot of this type allows choosing the orientation that best benefits the robot's movement. Four different tests were performed where vertical forces and torques were applied to be exerted by the robot, capturing depth values and the orientation of the robot's pose, each test with a different angle of inclination of the thrusters. The angle that achieved the best results was the angle of -5 degrees with respect to the vertical.
- Open Access
Control Strategy of an Underactuated Underwater Drone-Shape Robot for Grasping Tasks
In underwater environments, ensuring people’s safety is complicated, with potentially life-threatening outcomes, especially when divers have to work in deeper conditions. To improve the available solutions for working with robots in this kind of environment, we propose the validation of a control strategy for robots when taking objects from the seabed. The control strategy proposed is based on acceleration feedback in the model of the system. Using this model, the reference values for position, velocity and acceleration are estimated, and then the position error signal can be computed. When the desired position is obtained, it is possible to then obtain the position error. The validation was carried out using three different objects: a ball, a bottle, and a plant. The experiment consisted of using this control strategy to take those objects, which the robot carried for a moment to validate the stabilisation control and reference following the control in terms of angle and depth. The robot was operated by a pilot from outside of the pool and was guided using a camera and sonar in a teleoperated way. As an advantage of this control strategy, the model upon which the robot is based is decoupled, allowing control of the robot for each uncoupled plane, this being the main finding of these tests. This demonstrates that the robot can be controlled by a control strategy based on a decoupled model, taking into account the hydrodynamic parameters of the robot.
Open AccessControl Strategy of an Underactuated Underwater Drone-Shape Robot for Grasping Tasks
In underwater environments, ensuring people’s safety is complicated, with potentially life-threatening outcomes, especially when divers have to work in deeper conditions. To improve the available solutions for working with robots in this kind of environment, we propose the validation of a control strategy for robots when taking objects from the seabed. The control strategy proposed is based on acceleration feedback in the model of the system. Using this model, the reference values for position, velocity and acceleration are estimated, and then the position error signal can be computed. When the desired position is obtained, it is possible to then obtain the position error. The validation was carried out using three different objects: a ball, a bottle, and a plant. The experiment consisted of using this control strategy to take those objects, which the robot carried for a moment to validate the stabilisation control and reference following the control in terms of angle and depth. The robot was operated by a pilot from outside of the pool and was guided using a camera and sonar in a teleoperated way. As an advantage of this control strategy, the model upon which the robot is based is decoupled, allowing control of the robot for each uncoupled plane, this being the main finding of these tests. This demonstrates that the robot can be controlled by a control strategy based on a decoupled model, taking into account the hydrodynamic parameters of the robot.
- Open Access
Method to Develop Legs for Underwater Robots: From Multibody Dynamics with Experimental Data to Mechatronic Implementation
Exploration of the seabed may be complex, and different parameters must be considered for a robotic system to achieve tasks in this environment, such as soil characteristics, seabed gait, and hydrodynamic force in this extreme environment. This paper presents a gait simulation of a quadrupedal robot used on a typical terrigenous sediment seabed, considering the mechanical properties of the type of soil, stiffness, and damping and friction coefficients, referenced with the specialized literature and applied in a computational multibody model with many experimental data in a specific underwater environment to avoi hydrodynamic effects. The requirements of the positions and torque in the robot’s active joints are presented in accordance with a 5R mechanism for the leg and the natural pattern shown in the gait of a dog on the ground. These simulation results are helpful for the design of a testbed, with a leg prototype and its respective hardware and software architecture and a subsequent comparison with the real results.
Open AccessMethod to Develop Legs for Underwater Robots: From Multibody Dynamics with Experimental Data to Mechatronic Implementation
Exploration of the seabed may be complex, and different parameters must be considered for a robotic system to achieve tasks in this environment, such as soil characteristics, seabed gait, and hydrodynamic force in this extreme environment. This paper presents a gait simulation of a quadrupedal robot used on a typical terrigenous sediment seabed, considering the mechanical properties of the type of soil, stiffness, and damping and friction coefficients, referenced with the specialized literature and applied in a computational multibody model with many experimental data in a specific underwater environment to avoi hydrodynamic effects. The requirements of the positions and torque in the robot’s active joints are presented in accordance with a 5R mechanism for the leg and the natural pattern shown in the gait of a dog on the ground. These simulation results are helpful for the design of a testbed, with a leg prototype and its respective hardware and software architecture and a subsequent comparison with the real results.
- Open Access
A Simulation Study of a Planar Cable-Driven Parallel Robot to Transport Supplies for Patients with Contagious Diseases in Health Care Centers
Currently, a large number of investigations are being carried out in the area of robotics focused on proposing solutions in the field of health, and many of them have directed their efforts on issues related to the health emergency due to COVID-19. Considering that one of the ways to reduce the risk of contagion is by avoiding contact and closeness between people when exchanging supplies such as food, medicine, clothing, etc., this work proposes the use of a planar cable-driven parallel robot for the transport of supplies in hospitals whose room distribution has planar architecture. The robot acts in accordance with a procedure proposed for each task to be carried out, which includes the process of disinfection (based on Ultraviolet-C light) of the supplies transported inside the robot’s end effector. The study presents a design proposal for the geometry of the planar cable-driven parallel robots and its end effector, as well as the software simulations that allow evaluating the robot’s movement trajectories and the responses of the position control system based on Fuzzy-PID controllers.
Open AccessA Simulation Study of a Planar Cable-Driven Parallel Robot to Transport Supplies for Patients with Contagious Diseases in Health Care Centers
Currently, a large number of investigations are being carried out in the area of robotics focused on proposing solutions in the field of health, and many of them have directed their efforts on issues related to the health emergency due to COVID-19. Considering that one of the ways to reduce the risk of contagion is by avoiding contact and closeness between people when exchanging supplies such as food, medicine, clothing, etc., this work proposes the use of a planar cable-driven parallel robot for the transport of supplies in hospitals whose room distribution has planar architecture. The robot acts in accordance with a procedure proposed for each task to be carried out, which includes the process of disinfection (based on Ultraviolet-C light) of the supplies transported inside the robot’s end effector. The study presents a design proposal for the geometry of the planar cable-driven parallel robots and its end effector, as well as the software simulations that allow evaluating the robot’s movement trajectories and the responses of the position control system based on Fuzzy-PID controllers.
- Open Access
- 19 February 2021
- Published by MDPI AG in Electronics
- Vol. 10 (4) , 489
An Intelligent Algorithm for Decision Making System and Control of the GEMMA Guide Paradigm Using the Fuzzy Petri Nets Approach
The aim of this article is to present the fuzzy Petri net algorithm and its implementation on the Guide d’etude des modes de marche et d’arrêt (GEMMA) guide paradigm. Additionally, this article presents a brief description of the GEMMA guide paradigm, the fuzzy logic approach, the Petri nets theory, and fuzzy Petri nets. Each algorithm is intended for a specific set of transitions, depending on their essential conditions. All these algorithms generate intelligent and safe control of the GEMMA guide paradigm in order to have the best control system for the machine. Moreover, the algorithms are able to make the best decision automatically depending on the machine’s situation and condition, something that allows the machine to be placed in the appropriate mode for each situation. The results show that the different fuzzy Petri net algorithms were working properly for the GEMMA guide paradigm and provided a proper solution for the automation of production systems.
- 19 February 2021
- Published by MDPI AG in Electronics
- Vol. 10 (4) , 489
Open AccessAn Intelligent Algorithm for Decision Making System and Control of the GEMMA Guide Paradigm Using the Fuzzy Petri Nets Approach
The aim of this article is to present the fuzzy Petri net algorithm and its implementation on the Guide d’etude des modes de marche et d’arrêt (GEMMA) guide paradigm. Additionally, this article presents a brief description of the GEMMA guide paradigm, the fuzzy logic approach, the Petri nets theory, and fuzzy Petri nets. Each algorithm is intended for a specific set of transitions, depending on their essential conditions. All these algorithms generate intelligent and safe control of the GEMMA guide paradigm in order to have the best control system for the machine. Moreover, the algorithms are able to make the best decision automatically depending on the machine’s situation and condition, something that allows the machine to be placed in the appropriate mode for each situation. The results show that the different fuzzy Petri net algorithms were working properly for the GEMMA guide paradigm and provided a proper solution for the automation of production systems.