Alejandro Rodriguez-Barroso
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Alejandro Rodriguez-Barroso has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Roque Saltaren
Centro de Automática y Robótica, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal 2, 28006 Madrid, Spain
8 shared publications - Gerardo Portilla
Centro de Automática y Robótica, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal 2, 28006 Madrid, Spain
7 shared publications - Juan S. Cely
Intelligent Robotics Lab, Universidad Rey Juan Carlos, EIF, 28943 Fuenlabrada, Spain
7 shared publications - Oz Yakrangi
Centro de Automática y Robótica, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal 2, 28006 Madrid, Spain
5 shared publications - Guillermo Camacho
University of Granada
4 shared publications - Juan de Vicente
F2N2Lab, Magnetic Soft Matter Group, Department of Applied Physics, Faculty of Sciences, University of Granada, C/Fuentenueva s/n, Granada 18071, Spain
4 shared publications
Latest Publications
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Continuous Frequency Sweeping Magnetorheometry Based on Variable Inductance
Self-assembly of magnetic colloidal particles into pre-programed microstructures plays an important role in the design of functional soft materials of interest in the microfabrication of sensors, actuators and/or tissue engineering applications. Particle aggregates emerge because of a delicate balance between magnetic interparticle interactions and hydrodynamic interactions with the carrier. These aggregates are dynamic and follow the field when its frequency is small enough. However, for sufficiently large field frequencies the particles within the aggregates experience a time-averaged magnetic interaction that results in the formation of static (i.e. arrested) gel-like structures. The transition between the dynamic and static state is not well understood because strong fields are needed to continuously vary their frequency in a wide range. Current approaches that rely on capacitor banks require periodically turning off field generation to prevent current and voltage spikes when switching circuit relays, which disrupts the gel-like structure. These unwanted alterations in the sample’s microstructure introduce perturbations in the measurements, rendering them unreliable. In this study, we propose an inductance approach that operates at resonance, eliminating the need for switching-off periods during frequency sweeps while enabling precise control of the phase lag between the applied voltage and the generated magnetic field. This method requires continuous inductance adjustment and allows direct comparison with interrupted systems, demonstrating that field interruptions exceeding 20% duty cycle significantly affect rheological measurements. Furthermore, videomicroscopy and rheometry are employed to investigate the transition between dynamic and static behavior, as well as to monitor microstructural evolution and rheological properties under oscillatory shear. These high-precision measurements facilitate the advancement of smart and biological material design and synthesis, enhance frequency control of microrobots for medical applications, and improve both the speed and resolution of active rheometry techniques.
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Continuous Frequency Sweeping Magnetorheometry Based on Variable Inductance
Self-assembly of magnetic colloidal particles into pre-programed microstructures plays an important role in the design of functional soft materials of interest in the microfabrication of sensors, actuators and/or tissue engineering applications. Particle aggregates emerge because of a delicate balance between magnetic interparticle interactions and hydrodynamic interactions with the carrier. These aggregates are dynamic and follow the field when its frequency is small enough. However, for sufficiently large field frequencies the particles within the aggregates experience a time-averaged magnetic interaction that results in the formation of static (i.e. arrested) gel-like structures. The transition between the dynamic and static state is not well understood because strong fields are needed to continuously vary their frequency in a wide range. Current approaches that rely on capacitor banks require periodically turning off field generation to prevent current and voltage spikes when switching circuit relays, which disrupts the gel-like structure. These unwanted alterations in the sample’s microstructure introduce perturbations in the measurements, rendering them unreliable. In this study, we propose an inductance approach that operates at resonance, eliminating the need for switching-off periods during frequency sweeps while enabling precise control of the phase lag between the applied voltage and the generated magnetic field. This method requires continuous inductance adjustment and allows direct comparison with interrupted systems, demonstrating that field interruptions exceeding 20% duty cycle significantly affect rheological measurements. Furthermore, videomicroscopy and rheometry are employed to investigate the transition between dynamic and static behavior, as well as to monitor microstructural evolution and rheological properties under oscillatory shear. These high-precision measurements facilitate the advancement of smart and biological material design and synthesis, enhance frequency control of microrobots for medical applications, and improve both the speed and resolution of active rheometry techniques.
- Open Access
- 13 February 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 111 (2) , 025415
High-speed videomicroscopy and magnetorheology under triaxial unsteady magnetic fields
We describe a custom-built device that is capable of superimposing triaxial unsteady magnetic fields on a sample at the same time that its microstructure is visualized using a high-speed camera and its rheological properties are measured with a commercial rheometer. The device reaches field strengths up to 5 kA · m − 1 , frequencies up to 4 kHz, and its functionality is evaluated by testing magnetorheological fluids under steady shear flow and field transients. Striking differences are found at small Mason numbers by changing the field configuration.
- 13 February 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 111 (2) , 025415
Open AccessHigh-speed videomicroscopy and magnetorheology under triaxial unsteady magnetic fields
We describe a custom-built device that is capable of superimposing triaxial unsteady magnetic fields on a sample at the same time that its microstructure is visualized using a high-speed camera and its rheological properties are measured with a commercial rheometer. The device reaches field strengths up to 5 kA · m − 1 , frequencies up to 4 kHz, and its functionality is evaluated by testing magnetorheological fluids under steady shear flow and field transients. Striking differences are found at small Mason numbers by changing the field configuration.
- 29 July 2024
- Published by Springer Nature
- p. 169-172
High-Speed Rheo-Microscopy in Magnetorheological Fluids Under Triaxial Unsteady Magnetic Fields
- 29 July 2024
- Published by Springer Nature
- p. 169-172
High-Speed Rheo-Microscopy in Magnetorheological Fluids Under Triaxial Unsteady Magnetic Fields
- 21 February 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (2) , L021001
Experimental Realization of a Colloidal Ratchet Effect in a non-Newtonian Fluid
Shear thinning fluids represent a class of non-Newtonian media characterized by a decrease of the apparent viscosity when increasing the shear rate. Here we experimentally demonstrate a deterministic ratchet effect in such media that enables directed transport of microscopic particles under a square-wave magnetic force. The applied modulation is designed in such a way that it does not produce any average speed when the particles are dispersed in a Newtonian fluid (e.g., water). However, in a dilute biopolymer solution, we observe the emergence of a net colloidal current when the forcing wave is composed of different amplitudes and time durations within a single period. The shear thinning nature of the dispersing medium nonlinearly raises the mean speed for strong forces, breaking the spatial symmetry of the particle displacement and generating a net colloidal transport. We complement our findings with numerical simulations that capture well the underlying physical mechanism, showing good agreement with the experimental results. Our technique to ratchet magnetic particles could be potentially extended in active microrheology to probe other non-Newtonian, complex fluids and to infer the nonlinear properties of viscoelastic materials.
- 21 February 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (2) , L021001
Experimental Realization of a Colloidal Ratchet Effect in a non-Newtonian Fluid
Shear thinning fluids represent a class of non-Newtonian media characterized by a decrease of the apparent viscosity when increasing the shear rate. Here we experimentally demonstrate a deterministic ratchet effect in such media that enables directed transport of microscopic particles under a square-wave magnetic force. The applied modulation is designed in such a way that it does not produce any average speed when the particles are dispersed in a Newtonian fluid (e.g., water). However, in a dilute biopolymer solution, we observe the emergence of a net colloidal current when the forcing wave is composed of different amplitudes and time durations within a single period. The shear thinning nature of the dispersing medium nonlinearly raises the mean speed for strong forces, breaking the spatial symmetry of the particle displacement and generating a net colloidal transport. We complement our findings with numerical simulations that capture well the underlying physical mechanism, showing good agreement with the experimental results. Our technique to ratchet magnetic particles could be potentially extended in active microrheology to probe other non-Newtonian, complex fluids and to infer the nonlinear properties of viscoelastic materials.
- 9 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (1) , 783-790
Simulating Underwater Human Motions on the Ground With a Cable-Driven Robotic Platform
Human performance and body motions when submerged underwater are highly influenced by buoyancy forces. In this article, we simulate the effect of buoyancy on human motion over ground by using a cable-driven robotic system. The robotic platform was configured to apply buoyancy forces on the human torso, similar to underwater, while subjects performed reaching and assembly tasks. Previous studies have analyzed muscle activity, postural balance, and limb kinematics in aquatic enclosures. However, from these studies, it is difficult to correlate observed human physiology changes with a specific underwater feature. The goal of this article is to expand our knowledge in objectively characterizing how physical underwater features affect human performance. The results of this article could help in designing more efficient overground programs to train divers in performing submarine motor tasks. For this purpose, we investigated motion of body center of mass (COM), ground reaction forces, muscular activity with surface electromyography (sEMG), and limb coordination while participants performed reaching tasks with and without simulated underwater forces. Within the simulated underwater environment with the cable system, buoyancy force significantly displaced the COM to outside the base of support. Additionally, ground reaction forces and sEMG of back muscles were significantly reduced during this condition. The results obtained in the present study are in line with previous experiments performed underwater. The results show the potential applicability of cable-driven platforms to expand our understanding in the future about the influence of aquatics on functional tasks.
- 9 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (1) , 783-790
Simulating Underwater Human Motions on the Ground With a Cable-Driven Robotic Platform
Human performance and body motions when submerged underwater are highly influenced by buoyancy forces. In this article, we simulate the effect of buoyancy on human motion over ground by using a cable-driven robotic system. The robotic platform was configured to apply buoyancy forces on the human torso, similar to underwater, while subjects performed reaching and assembly tasks. Previous studies have analyzed muscle activity, postural balance, and limb kinematics in aquatic enclosures. However, from these studies, it is difficult to correlate observed human physiology changes with a specific underwater feature. The goal of this article is to expand our knowledge in objectively characterizing how physical underwater features affect human performance. The results of this article could help in designing more efficient overground programs to train divers in performing submarine motor tasks. For this purpose, we investigated motion of body center of mass (COM), ground reaction forces, muscular activity with surface electromyography (sEMG), and limb coordination while participants performed reaching tasks with and without simulated underwater forces. Within the simulated underwater environment with the cable system, buoyancy force significantly displaced the COM to outside the base of support. Additionally, ground reaction forces and sEMG of back muscles were significantly reduced during this condition. The results obtained in the present study are in line with previous experiments performed underwater. The results show the potential applicability of cable-driven platforms to expand our understanding in the future about the influence of aquatics on functional tasks.
- 1 June 2021
- Published by Springer Nature
- p. 413-425
Cable-Driven Robot to Simulate the Buoyancy Force for Improving the Performance of Underwater Robots
- 1 June 2021
- Published by Springer Nature
- p. 413-425
Cable-Driven Robot to Simulate the Buoyancy Force for Improving the Performance of Underwater Robots
- Open Access
- 19 February 2021
- Published by MDPI AG in Electronics
- Vol. 10 (4) , 489
An Intelligent Algorithm for Decision Making System and Control of the GEMMA Guide Paradigm Using the Fuzzy Petri Nets Approach
The aim of this article is to present the fuzzy Petri net algorithm and its implementation on the Guide d’etude des modes de marche et d’arrêt (GEMMA) guide paradigm. Additionally, this article presents a brief description of the GEMMA guide paradigm, the fuzzy logic approach, the Petri nets theory, and fuzzy Petri nets. Each algorithm is intended for a specific set of transitions, depending on their essential conditions. All these algorithms generate intelligent and safe control of the GEMMA guide paradigm in order to have the best control system for the machine. Moreover, the algorithms are able to make the best decision automatically depending on the machine’s situation and condition, something that allows the machine to be placed in the appropriate mode for each situation. The results show that the different fuzzy Petri net algorithms were working properly for the GEMMA guide paradigm and provided a proper solution for the automation of production systems.
- 19 February 2021
- Published by MDPI AG in Electronics
- Vol. 10 (4) , 489
Open AccessAn Intelligent Algorithm for Decision Making System and Control of the GEMMA Guide Paradigm Using the Fuzzy Petri Nets Approach
The aim of this article is to present the fuzzy Petri net algorithm and its implementation on the Guide d’etude des modes de marche et d’arrêt (GEMMA) guide paradigm. Additionally, this article presents a brief description of the GEMMA guide paradigm, the fuzzy logic approach, the Petri nets theory, and fuzzy Petri nets. Each algorithm is intended for a specific set of transitions, depending on their essential conditions. All these algorithms generate intelligent and safe control of the GEMMA guide paradigm in order to have the best control system for the machine. Moreover, the algorithms are able to make the best decision automatically depending on the machine’s situation and condition, something that allows the machine to be placed in the appropriate mode for each situation. The results show that the different fuzzy Petri net algorithms were working properly for the GEMMA guide paradigm and provided a proper solution for the automation of production systems.
- Open Access
- 28 November 2020
- Published by Universidad Politecnica de Madrid - University Library
Cable-driven Parallel Robot to Simulate the Underwater Environment in Humanoids
- 28 November 2020
- Published by Universidad Politecnica de Madrid - University Library
Open AccessCable-driven Parallel Robot to Simulate the Underwater Environment in Humanoids
- Open Access
Experimental and Computational Methodology for the Determination of Hydrodynamic Coefficients Based on Free Decay Test: Application to Conception and Control of Underwater Robots
Hydrodynamic coefficients are essential for the development of underwater robots; in particular, for their design and navigation control. To obtain these coefficients, several techniques exist. These methods are usually experimental, but, more recently, some have been designed by a combination of experiments with computational methods based on Computational Fluid Dynamics (CFD). One method for obtaining the hydrodynamic coefficients of an ROV (Remote Operated Vehicle) is by using an experimental PMM (Planar Motion Mechanism) or CWC (Circular Water Channel); however, the use of these experimental infrastructures is costly. Therefore, it is of interest to obtain these coefficients in other ways, for example, by the use of simple experiments. The Free Decay Test is an ideal type of experiment, as it has a low cost and is simple to implement. In this paper, two different free decay tests were carried out, to which three different methods for obtaining coefficients were applied. They were compared with results obtained by CFD simulation to conduct a statistical analysis in order to determine their behaviours. It was possible to obtain values of the drag and added mass coefficients for the models analysed, where the values were obtained for an Underwater Drone Robot (UDrobot).
Open AccessExperimental and Computational Methodology for the Determination of Hydrodynamic Coefficients Based on Free Decay Test: Application to Conception and Control of Underwater Robots
Hydrodynamic coefficients are essential for the development of underwater robots; in particular, for their design and navigation control. To obtain these coefficients, several techniques exist. These methods are usually experimental, but, more recently, some have been designed by a combination of experiments with computational methods based on Computational Fluid Dynamics (CFD). One method for obtaining the hydrodynamic coefficients of an ROV (Remote Operated Vehicle) is by using an experimental PMM (Planar Motion Mechanism) or CWC (Circular Water Channel); however, the use of these experimental infrastructures is costly. Therefore, it is of interest to obtain these coefficients in other ways, for example, by the use of simple experiments. The Free Decay Test is an ideal type of experiment, as it has a low cost and is simple to implement. In this paper, two different free decay tests were carried out, to which three different methods for obtaining coefficients were applied. They were compared with results obtained by CFD simulation to conduct a statistical analysis in order to determine their behaviours. It was possible to obtain values of the drag and added mass coefficients for the models analysed, where the values were obtained for an Underwater Drone Robot (UDrobot).
- Open Access
Dynamic Walking of a Legged Robot in Underwater Environments
In this research, the dynamic walking of a legged robot in underwater environments is proposed. For this goal, the underwater zero moment point (Uzmp) is proposed in order to generate the trajectory of the centre of the mass of the robot. Also, the underwater zero moment point auxiliary (Uzmp aux.) is employed to stabilize the balance of the robot before it undergoes any external perturbations. The concept demonstration of a legged robot with hydraulic actuators is developed. Moreover, the control that was used is described and the hydrodynamic variables of the robot are determined. The results demonstrate the validity of the concepts that are proposed in this article, and the dynamic walking of the legged robot in an underwater environment is successfully demonstrated.
Open AccessDynamic Walking of a Legged Robot in Underwater Environments
In this research, the dynamic walking of a legged robot in underwater environments is proposed. For this goal, the underwater zero moment point (Uzmp) is proposed in order to generate the trajectory of the centre of the mass of the robot. Also, the underwater zero moment point auxiliary (Uzmp aux.) is employed to stabilize the balance of the robot before it undergoes any external perturbations. The concept demonstration of a legged robot with hydraulic actuators is developed. Moreover, the control that was used is described and the hydrodynamic variables of the robot are determined. The results demonstrate the validity of the concepts that are proposed in this article, and the dynamic walking of the legged robot in an underwater environment is successfully demonstrated.