Bhavtosh Bansal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bhavtosh Bansal has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
- Bipul Pal
Department of Physics, Indian Institute of Science Education and Research Kolkata, Mohanpur, West Bengal 741246, India
10 shared publications V. Venkataraman
Department of Physics, Indian Institute of Science 2 , Bangalore 560 012, India
8 shared publications- Kingshuk Mukhuti
Department of Physics, Chemistry and Biology (IFM) Linköping University Linköping Sweden
7 shared publications - Arnab Bhattacharya
Department of Condensed Matter Physics and Materials Science, Tata Institute of Fundamental Research, Mumbai 400005, India
6 shared publications - Manus Hayne
Department of Physics, Lancaster University 2 , Lancaster LA1 4YB
6 shared publications - Richarj Mondal
Division of Applied Physics, Faculty of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennodai, Tsukuba 305-8573, Japan
6 shared publications
Latest Publications
- 1 September 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (9)
Development of a high-field pulsed magnet and optical fiber coupled cryostat system for magneto-photoluminescence measurements
This paper presents the development of a high field pulsed magnet system combined with an optical fiber-coupled low temperature cryostat for magneto-photoluminescence measurements. A novel aspect of our system is the use of electrolytic capacitors in a 75 kJ capacitor bank to drive the pulsed magnet, enabling the generation of high magnetic fields at a relatively low charging voltage (400 V). The zylon-reinforced wire wound magnet coil achieves maximum field strength of 35 T with a magnetic field rise time of 10 ms. The integrated cryostat was developed to meet the specific requirements of magneto-photoluminescence experiments using a 3.8 K helium closed-cycle cryocooler to provide a stable low-temperature environment down to 5 K.
- 1 September 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (9)
Development of a high-field pulsed magnet and optical fiber coupled cryostat system for magneto-photoluminescence measurements
This paper presents the development of a high field pulsed magnet system combined with an optical fiber-coupled low temperature cryostat for magneto-photoluminescence measurements. A novel aspect of our system is the use of electrolytic capacitors in a 75 kJ capacitor bank to drive the pulsed magnet, enabling the generation of high magnetic fields at a relatively low charging voltage (400 V). The zylon-reinforced wire wound magnet coil achieves maximum field strength of 35 T with a magnetic field rise time of 10 ms. The integrated cryostat was developed to meet the specific requirements of magneto-photoluminescence experiments using a 3.8 K helium closed-cycle cryocooler to provide a stable low-temperature environment down to 5 K.
- 8 January 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (4)
Integrated cryogenic optical microscopy and transport measurement system for spatiotemporal studies across phase transitions from 100 K to 400 K
We discuss the design and performance of a liquid nitrogen-cooled optical microscopy system that also allows for simultaneous transport measurements. With a cold-finger based design, the system operates at temperature between 100 K to 400 K with controlled ramp rate (0.1 K/min to 42 K/min) and thermal stability (±5 mK) at any given temperature. The cryostat forms a part of a modular and versatile experimental set up, particularly suitable for low temperature bright-field reflection microscopy under Köhler illumination. With careful selection of optical components, an active focus correction system to account for the thermal expansion, along with effective vibration isolation, a sub-micron spatial resolution has been achieved. Finally, we demonstrate optical imaging of the electric breakdown in vanadium dioxide using this setup.
- 8 January 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (4)
Integrated cryogenic optical microscopy and transport measurement system for spatiotemporal studies across phase transitions from 100 K to 400 K
We discuss the design and performance of a liquid nitrogen-cooled optical microscopy system that also allows for simultaneous transport measurements. With a cold-finger based design, the system operates at temperature between 100 K to 400 K with controlled ramp rate (0.1 K/min to 42 K/min) and thermal stability (±5 mK) at any given temperature. The cryostat forms a part of a modular and versatile experimental set up, particularly suitable for low temperature bright-field reflection microscopy under Köhler illumination. With careful selection of optical components, an active focus correction system to account for the thermal expansion, along with effective vibration isolation, a sub-micron spatial resolution has been achieved. Finally, we demonstrate optical imaging of the electric breakdown in vanadium dioxide using this setup.
- Open Access
- 13 August 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (32) , 17031-17037
Room temperature photobrightening and low temperature photodarkening in two-dimensional CdSe nanoplatelets
Surface–ligand interactions drive reversible photobrightening and photodarkening in CdSe nanoplatelets. Comparative studies of capped and uncapped samples highlight the critical role of surface chemistry in optical stability.
- 13 August 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (32) , 17031-17037
Open AccessRoom temperature photobrightening and low temperature photodarkening in two-dimensional CdSe nanoplatelets
Surface–ligand interactions drive reversible photobrightening and photodarkening in CdSe nanoplatelets. Comparative studies of capped and uncapped samples highlight the critical role of surface chemistry in optical stability.
- Open Access
- 12 August 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (6)
Picosecond evolution of an induced metallic state under infinitesimal optical doping in NdNiO3
NdNiO3 is a rare-earth nickelate where competing interactions yield a thermally induced metal–insulator transition accompanied by simultaneous structural and magnetic transitions. In recent years, femtosecond time resolved measurements have emerged as powerful tools for studying nonequilibrium phases in such complex systems. In this work, we demonstrate that even at 110 K, well below the insulator–metal transition temperature, an infinitesimal ≈0.1% optical doping in nickel’s d-band can destabilize the insulating phase into a long-lived metallic phase that builds up in the first 5 ps after the pulsed excitation. Using the hysteresis free nature of the first-order transition in our sample, we infer the true lattice temperature from resistance measurement. The threshold temperature for the runaway metallization is identified with the start of the phase coexistence region. We thus conclude that simultaneous electron–hole injection is at least an order of magnitude more effective in suppressing the transition than doping by electrons or holes alone. The results also demonstrate that the homeostasis-like situations responsible for the stability in such complex systems are nevertheless susceptible to catastrophic failures under certain types of infinitesimal perturbations.
- 12 August 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (6)
Open AccessPicosecond evolution of an induced metallic state under infinitesimal optical doping in NdNiO3
NdNiO3 is a rare-earth nickelate where competing interactions yield a thermally induced metal–insulator transition accompanied by simultaneous structural and magnetic transitions. In recent years, femtosecond time resolved measurements have emerged as powerful tools for studying nonequilibrium phases in such complex systems. In this work, we demonstrate that even at 110 K, well below the insulator–metal transition temperature, an infinitesimal ≈0.1% optical doping in nickel’s d-band can destabilize the insulating phase into a long-lived metallic phase that builds up in the first 5 ps after the pulsed excitation. Using the hysteresis free nature of the first-order transition in our sample, we infer the true lattice temperature from resistance measurement. The threshold temperature for the runaway metallization is identified with the start of the phase coexistence region. We thus conclude that simultaneous electron–hole injection is at least an order of magnitude more effective in suppressing the transition than doping by electrons or holes alone. The results also demonstrate that the homeostasis-like situations responsible for the stability in such complex systems are nevertheless susceptible to catastrophic failures under certain types of infinitesimal perturbations.
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Relaxation-free athermal states in VO2 for thermal-breach memory
Thermally induced martensitic phase transitions are broadly divided into two classes—isothermal and athermal. While the isothermal transformations correspond to the diffusive nucleation-and-growth phenomenon associated with the first-order phase transitions, the athermal transformations are characterized by absence of diffusion. Here, the phase evolution at fixed temperature is arrested. The phase transformation in real martensites of course only approximates the two extreme scenarios. It has been recently argued [Mukhuti et al., Phys. Rev. Lett. 134, 076901 (2025)] that this athermal character combined with the return point memory property of the hysteresis loops opens up the possibility of the use of such athermal martensites as thermal-breach memory where a small and reversible temperature perturbation can be inferred from the irreversible phase evolution of the material. In this Letter, we examine the possibility of the use of vanadium dioxide (VO2) films, which show a hysteretic metal–insulator transition above room temperature for such applications. We find that the metastable states show a temporal evolution of less than 2% at constant temperature over a period of 15 h and during this period a thermal perturbation of 1 K experienced by the sample in a suitably prepared metastable state can be inferred from irreversible change in its resistance. Apart from usage in thermal analogs of logic units in neuromorphic computational devices, the highly sensitive and stable behavior of these athermal states of VO2 establishes the viability of thermal-breach memory near room temperature.
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Relaxation-free athermal states in VO2 for thermal-breach memory
Thermally induced martensitic phase transitions are broadly divided into two classes—isothermal and athermal. While the isothermal transformations correspond to the diffusive nucleation-and-growth phenomenon associated with the first-order phase transitions, the athermal transformations are characterized by absence of diffusion. Here, the phase evolution at fixed temperature is arrested. The phase transformation in real martensites of course only approximates the two extreme scenarios. It has been recently argued [Mukhuti et al., Phys. Rev. Lett. 134, 076901 (2025)] that this athermal character combined with the return point memory property of the hysteresis loops opens up the possibility of the use of such athermal martensites as thermal-breach memory where a small and reversible temperature perturbation can be inferred from the irreversible phase evolution of the material. In this Letter, we examine the possibility of the use of vanadium dioxide (VO2) films, which show a hysteretic metal–insulator transition above room temperature for such applications. We find that the metastable states show a temporal evolution of less than 2% at constant temperature over a period of 15 h and during this period a thermal perturbation of 1 K experienced by the sample in a suitably prepared metastable state can be inferred from irreversible change in its resistance. Apart from usage in thermal analogs of logic units in neuromorphic computational devices, the highly sensitive and stable behavior of these athermal states of VO2 establishes the viability of thermal-breach memory near room temperature.
- 18 February 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (7) , 076901
Evidence of Athermal Metastable Phase in a Halide Perovskite: Optically Tracked Thermal-Breach Memory
Halide perovskite materials have been extensively studied in the last decade because of their impressive optoelectronic properties. However, their one characteristic that is uncommon for semiconductors is that many undergo thermally induced structural phase transitions. The transition is hysteretic, with the hysteresis window marking the boundary of the metastable phase. We have discovered that in methylammonium lead iodide, this hysteretic metastable phase is athermal, meaning it shows almost no temporal phase evolution under isothermal conditions. We also show that a large number of distinguishable metastable states can be prepared following different thermal pathways. Furthermore, under a reversible thermal perturbation, the states in the metastable phase either show return-point memory or undergo a systematic nonrecoverable phase evolution, depending on the thermal history and the sign of the temperature perturbation. Since the phase fraction can be probed with extreme sensitivity via luminescence, we have an optically retrievable memory that reliably records any breach in temperature stability. Such thermal-breach memory in athermal martensites, of which there are numerous examples, may be useful for tagging packages requiring strict temperature control during transportation or preservation.
- 18 February 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (7) , 076901
Evidence of Athermal Metastable Phase in a Halide Perovskite: Optically Tracked Thermal-Breach Memory
Halide perovskite materials have been extensively studied in the last decade because of their impressive optoelectronic properties. However, their one characteristic that is uncommon for semiconductors is that many undergo thermally induced structural phase transitions. The transition is hysteretic, with the hysteresis window marking the boundary of the metastable phase. We have discovered that in methylammonium lead iodide, this hysteretic metastable phase is athermal, meaning it shows almost no temporal phase evolution under isothermal conditions. We also show that a large number of distinguishable metastable states can be prepared following different thermal pathways. Furthermore, under a reversible thermal perturbation, the states in the metastable phase either show return-point memory or undergo a systematic nonrecoverable phase evolution, depending on the thermal history and the sign of the temperature perturbation. Since the phase fraction can be probed with extreme sensitivity via luminescence, we have an optically retrievable memory that reliably records any breach in temperature stability. Such thermal-breach memory in athermal martensites, of which there are numerous examples, may be useful for tagging packages requiring strict temperature control during transportation or preservation.
- Open Access
Evidence of Athermal Metastable Phase in a Halide Perovskite: Optically Tracked Thermal-Breach Memory
Halide perovskite materials have been extensively studied in the last decade because of their impressive optoelectronic properties. However, their one characteristic that is uncommon for semiconductors is that many undergo thermally induced structural phase transitions. The transition is hysteretic, with the hysteresis window marking the boundary of the metastable phase. We have discovered that in methylammonium lead iodide, this hysteretic metastable phase is athermal, meaning it shows almost no temporal phase evolution under isothermal conditions. We also show that a large number of distinguishable metastable states can be prepared following different thermal pathways. Furthermore, under a reversible thermal perturbation, the states in the metastable phase either show return-point memory or undergo a systematic nonrecoverable phase evolution, depending on the thermal history and the sign of the temperature perturbation. Since the phase fraction can be probed with extreme sensitivity via luminescence, we have an optically retrievable memory that reliably records any breach in temperature stability. Such thermal-breach memory in athermal martensites, of which there are numerous examples, may be useful for tagging packages requiring strict temperature control during transportation or preservation.
Open AccessEvidence of Athermal Metastable Phase in a Halide Perovskite: Optically Tracked Thermal-Breach Memory
Halide perovskite materials have been extensively studied in the last decade because of their impressive optoelectronic properties. However, their one characteristic that is uncommon for semiconductors is that many undergo thermally induced structural phase transitions. The transition is hysteretic, with the hysteresis window marking the boundary of the metastable phase. We have discovered that in methylammonium lead iodide, this hysteretic metastable phase is athermal, meaning it shows almost no temporal phase evolution under isothermal conditions. We also show that a large number of distinguishable metastable states can be prepared following different thermal pathways. Furthermore, under a reversible thermal perturbation, the states in the metastable phase either show return-point memory or undergo a systematic nonrecoverable phase evolution, depending on the thermal history and the sign of the temperature perturbation. Since the phase fraction can be probed with extreme sensitivity via luminescence, we have an optically retrievable memory that reliably records any breach in temperature stability. Such thermal-breach memory in athermal martensites, of which there are numerous examples, may be useful for tagging packages requiring strict temperature control during transportation or preservation.
- 26 June 2024
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 132 (26) , 266504
Exceptionally Slow, Long-Range, and Non-Gaussian Critical Fluctuations Dominate the Charge Density Wave Transition
is a well-studied quasi-one-dimensional compound long-known to have a charge-density wave (CDW) transition around 263 K. We argue that the critical fluctuations of the pinned CDW order parameter near the transition can be inferred from the resistance noise on account of their coupling to the dissipative normal carriers. Remarkably, the critical fluctuations of the CDW order parameter are slow enough to survive the thermodynamic limit and dominate the low-frequency resistance noise. The noise variance and relaxation time show rapid growth (critical opalescence and critical slowing down) within a temperature window of , where is the reduced temperature. This is very wide but consistent with the Ginzburg criterion. We further show that this resistance noise can be quantitatively used to extract the associated critical exponents. Below , we observe a crossover from mean-field to a fluctuation-dominated regime with the critical exponents taking anomalously low values. The distribution of fluctuations in the critical transition region is skewed and strongly non-Gaussian. This non-Gaussianity is interpreted as the breakdown of the validity of the central limit theorem as the diverging coherence volume becomes comparable to the macroscopic sample size. The large magnitude critical fluctuations observed over an extended temperature range, as well as the crossover from the mean-field to the fluctuation-dominated regime highlight the role of the quasi-one-dimensional character in controlling the phase transition.- 26 June 2024
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 132 (26) , 266504
Exceptionally Slow, Long-Range, and Non-Gaussian Critical Fluctuations Dominate the Charge Density Wave Transition
is a well-studied quasi-one-dimensional compound long-known to have a charge-density wave (CDW) transition around 263 K. We argue that the critical fluctuations of the pinned CDW order parameter near the transition can be inferred from the resistance noise on account of their coupling to the dissipative normal carriers. Remarkably, the critical fluctuations of the CDW order parameter are slow enough to survive the thermodynamic limit and dominate the low-frequency resistance noise. The noise variance and relaxation time show rapid growth (critical opalescence and critical slowing down) within a temperature window of , where is the reduced temperature. This is very wide but consistent with the Ginzburg criterion. We further show that this resistance noise can be quantitatively used to extract the associated critical exponents. Below , we observe a crossover from mean-field to a fluctuation-dominated regime with the critical exponents taking anomalously low values. The distribution of fluctuations in the critical transition region is skewed and strongly non-Gaussian. This non-Gaussianity is interpreted as the breakdown of the validity of the central limit theorem as the diverging coherence volume becomes comparable to the macroscopic sample size. The large magnitude critical fluctuations observed over an extended temperature range, as well as the crossover from the mean-field to the fluctuation-dominated regime highlight the role of the quasi-one-dimensional character in controlling the phase transition.- 2 August 2023
- Published by American Physical Society (APS) in Physical Review E
- Vol. 108 (2) , 024101
Dynamic hysteresis at a noisy saddle node shows power-law scaling but nonuniversal exponent
Dynamic hysteresis, viz., delay in switching of a bistable system on account of the finite sweep rate of the drive, has been extensively studied in dynamical and thermodynamic systems. Dynamic hysteresis results from slowing of the response around a saddle-node bifurcation. As a consequence, the hysteresis area increases with the sweep rate. Mean-field theory, relevant for noise-free situations, predicts power-law scaling with the area scaling exponent of . We have experimentally investigated the dynamic hysteresis for a thermally driven metal-insulator transition in a high-quality thin film and found the scaling exponent to be about , far less than the mean-field value. To understand this, we have numerically studied Langevin dynamics of the order parameter and found that noise, which can be thought to parallel finite temperature effects, influences the character of dynamic hysteresis by systematically lowering the dynamical exponent to as small as 0.2. The power-law scaling character, on the other hand, is unaffected in the range of chosen parameters. This work rationalizes the ubiquitous power-law scaling of the dynamic hysteresis as well as the wide variation in the scaling exponent between 0.66 and 0.2 observed in different systems over the last 30 years.- 2 August 2023
- Published by American Physical Society (APS) in Physical Review E
- Vol. 108 (2) , 024101
Dynamic hysteresis at a noisy saddle node shows power-law scaling but nonuniversal exponent
Dynamic hysteresis, viz., delay in switching of a bistable system on account of the finite sweep rate of the drive, has been extensively studied in dynamical and thermodynamic systems. Dynamic hysteresis results from slowing of the response around a saddle-node bifurcation. As a consequence, the hysteresis area increases with the sweep rate. Mean-field theory, relevant for noise-free situations, predicts power-law scaling with the area scaling exponent of . We have experimentally investigated the dynamic hysteresis for a thermally driven metal-insulator transition in a high-quality thin film and found the scaling exponent to be about , far less than the mean-field value. To understand this, we have numerically studied Langevin dynamics of the order parameter and found that noise, which can be thought to parallel finite temperature effects, influences the character of dynamic hysteresis by systematically lowering the dynamical exponent to as small as 0.2. The power-law scaling character, on the other hand, is unaffected in the range of chosen parameters. This work rationalizes the ubiquitous power-law scaling of the dynamic hysteresis as well as the wide variation in the scaling exponent between 0.66 and 0.2 observed in different systems over the last 30 years.- 3 July 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (27) , 13130-13135
Diamagnetism–Induced Suppression of the Resonance Energy Transfer
- 3 July 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (27) , 13130-13135
Diamagnetism–Induced Suppression of the Resonance Energy Transfer