Marios Charilaos Sousounis has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Voltage Control Market Integration: Technical and Regulatory Challenges for the Greek Electricity Market

    by Marios-Charilaos Sousounis, Epameinondas (Nondas) Floros, Fotios-Konstantinos Paterakis, Christos Dikaiakos, Ioannis Moraitis

    Stochastic power generation is the new reality in power system management. Voltage Control mechanisms based on physical assets of the power system are deemed inadequate and are not guaranteed to lead the energy transformation in a way that ensures system security as well as cost-effective operation. Many countries that recently attained deregulated Balancing Market environments are in need of regulatory provisions and rigorous extension of electricity market mechanisms. On 1 November 2020, the Greek Electricity Market commenced operations conforming to the European Target Model. Apart from the innate difficulties a transformation such as this contains, more challenges occur as Greece is bound by European law to design market-based incentive mechanisms to remunerate Ancillary Services provided to the power system. This paper aims to examine some of the technical and regulatory aspects linked with—future—Transmission System Operator (TSO) and Distribution System Operator (DSO) cooperation in overcoming local transmission system problems concerning Voltage regulation. The interaction between localized Voltage Control Market (VCM) and the Balancing Market, the incorporation and competition of Distributed Energy Resources (DER) and Transmission Energy Resources (TER) within the VCM along with the TSO - DSO procedures and products standardization are the focus points of the present research paper.


  • TSO/DSO Coordination for Voltage Regulation on Transmission Level: A Greek Case Study

    by A. Bachoumis, C. Kaskouras, G.P. Papaioannou, M. Sousounis

    This paper primarily aims to demonstrate how TSO, and DSO shall act in a coordinated manner to procure, and activate innovative flexibility services in a reliable, and efficient way. The objective of this paper is to demonstrate the financial, and system reliability benefits the TSO can exhibit by leveraging flexibility, under different coordination frameworks between the operators, in order to alleviate overvoltages caused by Ferranti effect. For this purpose, a service-oriented flexibility market is introduced. A case study from the Greek power system is used to conduct a cost-benefit analysis of the proposed market solution to the Business as Usual voltage regulation practice, under a spectrum of different technoeconomical parameters. The results indicate that the proposed flexibility solution can have significant economical benefits for TSO to regulate voltage through DSO or TSO connected assets.


  • Enhancing Transmission Power System Reliability through the Activation of Distribution Network Flexibilities

    by M.C. Sousounis, P. Dratsas, A. Kaskouras, A. Bachoumis, C. Dikaiakos, G. Papaioannou

  • Open Access

    Wave-to-Wire Power Maximization Control for All-Electric Wave Energy Converters with Non-Ideal Power Take-Off

    by Marios Charilaos Sousounis, Jonathan Shek

    The research presented in this paper investigates novel ways of optimizing all-electric wave energy converters for maximum wave-to-wire efficiency. In addition, a novel velocity-based controller is presented which was designed specifically for wave-to-wire efficiency maximization. In an ideal wave energy converter system, maximum efficiency in power conversion is achieved by maximizing the hydrodynamic efficiency of the floating body. However, in a real system, that involves losses at different stages from wave to grid, and the global wave-to-wire optimum differs from the hydrodynamic one. For that purpose, a full wave-to-wire wave energy converter that uses a direct-drive permanent magnet linear generator was modelled in detail. The modelling aspect included complex hydrodynamic simulations using Edinburgh Wave Systems Simulation Toolbox and the electrical modelling of the generator, controllers, power converters and the power transmission side with grid connection in MATLAB/Simulink. Three reference controllers were developed based on the previous literature: a real damping, a reactive spring damping and a velocity-based controller. All three literature-based controllers were optimized for maximum wave-to-wire efficiency for a specific wave energy resource profile. The results showed the advantage of using reactive power to bring the velocity of the point absorber and the wave excitation force in phase, which was done directly using the velocity-based controller, achieving higher efficiencies. Furthermore, it was demonstrated that maximizing hydrodynamic energy capture may not lead to maximum wave-to-wire efficiency. Finally, the controllers were also tested in random sea states, and their performance was evaluated.


  • Open Access

    Assessment of pulsating torque mitigation control strategy through tidal turbine emulation

    by Marios Charilaos Sousounis, Jonathan K.H. Shek

    This article presents the modelling and assessment of a pulsating torque mitigation control strategy by using a tidal turbine emulator in a laboratory environment. Sudden changes and variability of the tidal flow velocity have the effect of creating pulsations on tidal current turbines. These pulsations have an adverse effect on tidal turbine fatigue and ultimate loading as well as the operation of the drivetrain. For the above reasons, a pulsating torque mitigation control strategy has been developed and tested which is based on modifying the reference maximum power point speed of the generator. This article presents the assessment of this pulsating torque mitigation control strategy in a laboratory setup. A 7 kW tidal current turbine is modelled in MATLAB/Simulink. The tidal turbine is emulated in the laboratory setup by using a torque‐controlled induction motor. Results show the effectiveness of the method in a laboratory environment, the ability of the generator to accelerate and decelerate based on the speed controller commands and the difference between the pulsating torque mitigation control strategy and maximum power point operation (MPPO). In addition, the experimental results are compared with a Simulink model which will show the accuracy of the modelling process.


  • Open Access

    Direct drive wave energy array with offshore energy storage supplying off‐grid residential load

    by Marios Charilaos Sousounis, Leong Kit Gan, Aristides E. Kiprakis, Jonathan K.H. Shek

    Current developments in wave energy conversion have focused on locations where the wave energy resource is the highest; using large devices to generate hundreds of kilowatts of power. However, it is possible to generate power from low power waves using smaller wave energy devices. These lower rated wave energy converters can form arrays to supply power to remote coastal or island communities which are off‐grid. This study introduces wave‐to‐wire modelling of wave energy arrays for off‐grid systems using low power permanent‐magnet linear generators (PMLGs). Offshore energy storage at the DC link is added to keep the voltage constant along with a current controller for the inverter in order to supply constant low harmonic power to the residential load connected off‐grid. Simulation results produced in MATLAB/Simulink environment show that the wave energy array can generate power independently from the residential side by keeping the system stable using offshore storage. In addition, two different types of controllers for wave energy devices that use PMLGs are compared based on the power captured from the waves.


  • Open Access

    Modelling, control and frequency domain analysis of a tidal current conversion system with onshore converters

    by Marios Charilaos Sousounis, Jonathan K.H. Shek, Markus A. Mueller

    To optimise a tidal energy conversion system, the operation, maintenance and power generation aspects have to be taken into account. As a result the key focus of this study is to propose and investigate an alternative method of implementing a tidal energy conversion system using a pitch‐regulated turbine and a variable‐speed squirrel cage induction generator with long distance converters. The generator power output can be optimised by utilising variable‐speed control strategies allowing the system to operate at maximum power coefficient while availability can be increased by reducing the components installed offshore by using long three‐phase cables between the generator and onshore voltage source converters. The tidal current energy conversion system is investigated by developing a full resource‐to‐grid model in MATLAB/SIMULINK and by performing system analysis regarding the effects of harmonics in the long subsea cables. Simulation results show that optimised filter design and the choice of suitable operating frequency for the generator controller can minimise the overvoltages associated with the harmonics and the reflecting voltage waves in the cables.


  • Filter Design for Cable Overvoltage and Power Loss Minimization in a Tidal Energy System With Onshore Converters

    by Marios C. Sousounis, Jonathan K. H. Shek, Markus A. Mueller

    By moving the back-to-back ac-dc-ac converters in a tidal current conversion system (TCCS) onshore, maintenance requirements and cost are reduced significantly. This is because underwater components are not easily accessible and operate in a harsh environment. In addition to increased maintainability, the concept of long-distance controls offers maximum power capture from the tidal currents in the same way that a converter in the nacelle would offer. However, a number of challenges are associated with the concept of controlling electrical machines through long cables, which include electromagnetic traveling waves in the cables and system resonance. These phenomena can induce overvoltages at the generator terminals which can lead to system failure and high harmonics that can induce extra power losses. The major contribution of this paper is a new method of filter design for systems with long-distance controls and for minimization of system power loss. The proposed method is validated by developing a full resource-to-grid TCCS in MATLAB/Simulink. Simulation results show that using the proposed method, overvoltage mitigation can be achieved in the same way as literature-based filters, but at the same time, minimize the total system losses. The results from the analysis can be used to optimize tidal energy conversion systems with a similar electrical configuration.