ITInna Trus

Inna Trus

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Inna Trus has a total of 128 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    EXPERT SUBSTANTIATION OF RESOURCE-EFFICIENT TECHNOLOGY FOR SEPARATE DISPOSAL OF LOW- AND HIGH-ORGANIC SEWAGE SLUDGE

    by O.H. Levytska, I.M. Trus, S.V. Aleksieienko, Y.S. Voronkova

    During wastewater treatment at urban sewage facilities, sewage sludge is formed. The accumulation of sludge formed at different stages of the technological process and their subsequent combined disposal is a traditional way of waste management. However, sewage sludge is characterized by a multicomponent composition, in particular, it contains both organic and mineral components. Therefore, technologies that are relevant separately for organic waste and inorganic waste do not fully provide the raw material potential of sewage sludge. The dynamics of waste growth with an increase in the number of residents is shown. It is determined that with a population of 1 million people, sewage treatment plants can generate 17,300 m3/year of low-organic waste and 412,000 m3/year of high-organic waste (20,600 m3/year in terms of dry matter). Such a scale of waste generation is sufficient for the implementation of industrial waste disposal schemes. An assessment of the organic component of waste was carried out. A resource-saving technological scheme for sewage sludge has been developed, which involves two technological lines: obtaining biofuel and manufacturing building materials. Resource saving is ensured by reusing fermentation products and returning process water to the treatment cycle. The production of special building materials from sewage sludge can be facilitated by the presence of high-strength metal compounds that can increase the strength of building products. Waste processing methods include thermal methods that solve the problem of bacteriological contamination. Municipal treatment plants can implement these technologies using additional waste from urban agglomerations. This can include household waste are not only environmentally friendly, but also cost-effective and logistically convenient. Bibl. 48, Tab. 5, Fig. 7.

  • Open Access

    Cellulolytic activity of Schizophyllum commune (Schizophyllaceae) and its potential for the saccharification of oat straw

    by P. Zubyk, M. Hromnadska, V. Halysh, I. Trus, O. Yashchenko, V. Linovytska, I. Klechak

    Induction of cellulolytic enzyme systems in four strains of Schizophyllum commune (IBK 2904, IBK 2905, IBK 2906, and IBK 2907) cultivated on lignocellulosic substrates and their efficiency in oat straw saccharification were studied. The fungi were grown on Norcrans medium containing 1% alder sawdust or 1% oat straw as inducers of enzyme synthesis. It has been demonstrated that oat straw is a more effective inducer of cellulase production. Endoglucanase activity reached 109.60 U/gDM in strain 2904 and 103.39 U/gDM in strain 2905 on oat straw, compared with 78.64 U/gDM and 92.26 U/gDM on alder sawdust. Carboxymethylcellulase activity increased up to 2.6-fold under oat straw induction, with a maximum value of 245.75 U/gDM for strain 2904. Filter paper activity was moderately higher on oat straw, reaching 23.90 U/gDM in strain 2906. Supernatants obtained after cultivation on medium with oat straw provided higher efficiency of oat straw saccharification (7.87% for strain 2904), whereas supernatants obtained after cultivation on medium with alder sawdust increased saccharification efficiency to 3.95%. The highest substrate mass loss after 48 h of hydrolysis (9.30%) was recorded for strain 2905 cultivated on oat straw. The results indicate the potential of S. commune 2904 grown on oat straw-containing medium for the production of efficient enzyme preparations applicable to lignocellulosic biomass conversion.

  • Open Access

    Development of a machine-learning approach for predicting the corrosion rate of steel in aqueous electrolytes

    by Oleksii Humeniuk, Yevhen Chuprynov, Olena Levytska, Olena Ivanenko, Inna Trus

    The object of research is the corrosion of St20 steel in aqueous electrolytes of different salt compositions under aerated and deoxygenated conditions. The problem addressed is the development and comparative evaluation of corrosion rate prediction models based on a limited experimental dataset, with the possibility of interpreting the influence of individual factors. The effects of exposure time, NaCl, Na2SO4, and Na2CO3 concentrations, and aeration and deoxygenation conditions on the corrosion rate were investigated experimentally. Three models were considered: a physics-informed LSTM model, an LSTM model with an attention mechanism, and a Random Forest model. The training dataset was formed by pseudo-temporal expansion of the experimental data using a sliding window. This approach transforms discrete measurements into sequences for model training without replacing experimental corrosion rate determination with a purely computational procedure. The models generally reproduce the experimental dependencies within the dataset. The R2 values for the physics-informed LSTM model, the LSTM model with the attention mechanism, and the Random Forest model were 0.9926, 0.9925, and approximately 1. The physics-informed LSTM model accounts for differences between aerated and deoxygenated conditions, which are important for describing corrosion processes in aqueous media. The attention mechanism provides model interpretability by estimating the contribution of individual factors to the prediction. The Random Forest model was used for comparison with neural network approaches and to assess the reproduction of dependencies in the prepared experimental data. The results confirm the feasibility of combining experimental data and machine learning methods to model complex nonlinear corrosion processes. The approach can be used for preliminary assessment of the corrosion activity of aqueous media and for planning further laboratory and industrial researches.

  • Open Access

    A review of machine learning approaches for predicting metal corrosion rates in environmental monitoring

    by Oleksii Humeniuk, Inna Trus

    This paper reviews recent approaches to modelling and predicting the corrosion rate of metallic materials using machine learning methods. Corrosion remains a pressing issue for pipeline systems, industrial water circuits, structures exposed to atmospheric and marine environments, energy infrastructure, and protective coatings. Its development is associated not only with reduced material reliability and shorter service life of structures, but also with the risks of accidents, leaks, and adverse environmental impacts. The prediction of corrosion processes depends on the quality, completeness, and physicochemical relevance of the input data. In recent studies, such data are obtained through sensor-based monitoring, electrochemical measurements, atmospheric exposure tests, analysis of industrial water systems, and assessment of protective coating degradation. Model input parameters include temperature, relative humidity, pH, chloride concentration, electrical conductivity, corrosion current, exposure time, material composition, and the characteristics of the surface or protective layer. The paper summarises the applicability of regression and ensemble algorithms, neural network-based, hybrid, two-stage, and event-based approaches to predicting the corrosion behaviour of materials. Particular attention is given to models that account for the temporal nature of the corrosion process, the structure of the input data, and intermediate physicochemical indicators of degradation. It is shown that such approaches make it possible to move from assessing the current condition of a material to predictive monitoring of corrosion risks in engineered systems.

  • Open Access

    Structure Formation Mechanisms in Wet and Dry Pellets of the “Clay Mineral–Iron Ore Concentrate” Composite System

    by Yevhen Chuprinov, Kateryna Shmeltser, Inna Trus, Denis Miroshnichenko, Liudmyla Lysenko, Andriy Myronenko, Mariia Shved, Nataliia Hrudkina

    This article examines the interaction of clay minerals with iron ore concentrate in the context of the efficient use of composite mineral resources. The role of the adsorption properties of mineral additives in the formation of interparticle bonds in green pellets is analyzed. Using X-ray diffraction (XRD) and infrared spectroscopy, the dehydration processes of Na- and Ca-montmorillonite were investigated, and the influence of the cation type on the minerals’ ability to retain water was established. The high thermal stability of the structural OH groups of montmorillonite from the IV-layer clay of the Cherkasy deposit was confirmed, which is an important factor during high-temperature processing of mineral raw materials. Electron microscopy results showed that the fourth-layer clay forms an optimal porous composite microstructure, which contributes to increased water-holding capacity and gas permeability of the pellets. A direct correlation between the adsorption capacity of mineral additives and the strength of raw and dried pellets was experimentally confirmed. Montmorillonite with palygorskite from Layer IV, characterized by high adsorption capacity and prolonged dehydration processes, was identified as the most effective composite binding additive. The results obtained deepen scientific understanding of the mechanisms underlying pellet strength formation and have practical significance for the rational and resource-efficient use of mineral resources in the production of iron ore pellets. The results also demonstrate the potential for improving resource efficiency in pellet production through reduced consumption of traditional binder materials.

  • ENVIRONMENTAL EXPERTISE OF WATER TREATMENT AND WASTE MANAGEMENT SYSTEMS OF LOCAL SEWAGE FACILITIES FOR SERVICING MODERN RESIDENTIAL COMPLEXES AND RESORTS

    by Olena Levytska, Inna Trus

    The article presents the features and technological aspects of organizing local wastewater treatment systems, relevant and efficient equipment for mechanical and biological treatment blocks of domestic wastewater, the problem of sludge formation on mechanical screens, sand traps, and in sedimentation tanks. Toxic chemical pollutants that may be present in the sludge formed after the treatment of domestic wastewater are analyzed. The annual amount of waste generated during mechanical and biological treatment blocks of domestic wastewater at local treatment facilities is calculated. The dynamics of sludge volume increase in conditions of rising residents is shown, and waste management pathways are analyzed. Methods for separately disposing of low-organic and high-organic sludge from wastewater are discussed, integrated into the technological scheme, and recommended for use.

  • Acidic deep eutectic solvents for pretreatment of corn stalk biomass: Effects on cellulose and lignin structure and extraction efficiency

    by Viktoria Vorobyova, Vita Halysh, Inna Trus, Margarita Skiba, Oleksiy Myronyuk, Mykhaylo Byk, Georgii Vasyliev


  • Open Access

    CHARACTERIZATION OF LIGNOCELLULOSIC BIOMASS COMPLEX FOR UNLOCKING THE POTENTIAL OF SUSTAINABLE BIOFUEL PRODUCTION

    by Inna M. Trus, Vita V. Halysh, Olha V. Yashchenko, Valerii A. Barbash

    The present study investigates the chemical composition and delignification efficiency of various lignocellulosic biomass types as feedstock for bioethanol production. Agricultural residues and dedicated energy crops were identified as the most promising substrates due to their high cellulose (exceeding 40 %) and hemicellulose content (20–28 %), which are crucial for fermentable sugar yield. Non-fibrous biomass with higher lignin content, such as apricot and walnut shells (43–44 % lignin), exhibited structural resistance that hinders the effectiveness of pretreatment. Peracetic acid pretreatment was applied as a selective delignification method, demonstrating significant lignin removal while minimizing polysaccharide degradation. The optimal duration of pretreatment was established to be between 90 and 120 minutes, which provides a balance between preserving substrate yield and maximizing lignin reduction. Despite diffusion limitations in shell biomass, leading to higher residual lignin content, these substrates retained a significant proportion of polysaccharides, highlighting their potential for further use after process optimization. The findings provide critical insights into biomass-specific pretreatment strategies, facilitating enhanced enzymatic hydrolysis and subsequent biochemical conversion to bioethanol.


  • Open Access

    Environmental issues related to automobile transport

    by Arsenii Khatsei, Inna Trus

    Automobile transport is one of the major sources of anthropogenic impact on the environment in the modern world. Its rapid growth causes numerous environmental problems that affect all components of the environment – the atmosphere, hydrosphere, lithosphere, biota, as well as the climate and human health. This paper examines the main negative consequences of transport operations, including greenhouse gas emissions (CO2, CH4, NOx), smog formation, soil contamination with heavy metals, microplastic pollution in water bodies, wildlife mortality, and disruption of ecological connections. Special attention is paid to the impact on public health, particularly the development of respiratory, cardiovascular, and oncological diseases. The problem of urban consequences, such as noise pollution and the degradation of urban spaces, is also highlighted. The role of transport in climate change and global warming is assessed. Mitigation strategies are proposed, including the transition to electric vehicles, the development of public transport, reducing car dependency, and ecological urban planning with the creation of parking spaces. This study has practical significance for shaping modern transport policies in the context of sustainable development.