SBSergiy Boyko

Sergiy Boyko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sergiy Boyko has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    DEVELOPMENT OF THE VACUUM TABLE DESIGN FOR A CNC MILLING MACHINE FOR WOOD PROCESSING

    by Едуард Зубань, Chernihiv Polytechnic National University, Sergiy Boyko, Andriy Yeroshenko, Chernihiv National University of Technology

    Останнім часом великого поширення набули верстати з числовим програмним забезпеченням малої потужності для обробки деревини, пластику та м’яких металів. Вони знайшли своє застосування не тільки на великих виробництвах, а й в домашньому використанні в невеличких майстернях. Загальний час обробки значно збільшується за рахунок часу, який витрачається на кріплення заготовки до стола. Крім того, цей тип верстатів використовується для розкрою та обробки листових матеріалів, під час закріплення яких виникає деформація внаслідок їх недостатньої жорсткості і, як наслідок, низька точність обробки та збільшення припусків на обробку. Тому виникає потреба у збільшенні площі затиску таких заготовок, а оскільки застосування прихватів можливе лише по периметру заготовки, є потреба в пошуках нових ефективних способів закріплення.

  • Open Access

    Modelling of Contact Geometry of Tool and Workpiece in Grinding Process with Crossed Axes of the Tool and Workpiece with Circular Profile

    by Volodimyr Kalchenko, Andrij Yeroshenko, Sergiy Boyko, Olga Kalchenko

    A general model is developed, and on its basis, there are special models formulated of the grinding process with crossed axes of the tool and workpiece with a profile in the form of a circle arc. A new method of control of the grinding process is proposed, which will provide processing by equidistant curves, and the amount of cutting of a circle equal to the allowance. This will increase the productivity and quality of grinding. The presented method of grinding implements the processing with the spatial contact line of the tool and workpiece. When the axes are crossed, the contact line is stretched, which leads to an increase of the contact area and, accordingly, to a decrease of the temperature in the processing area. This allows processing of workpieces with more productive cutting conditions.

  • Determination of the cutting force components while milling cylindrical surfaces with an oriented tool

    by V.V Kalchenko, S.D Tsybulya, A.V Kolohoida, Ye.Yu Sakhno, S.V Boyko

    Purpose. Construction of a general modular mathematical spatial model of the removal allowance process and shaping when milling round surfaces of rotation, such as camshaft necks, cylindrical surfaces of gearbox shafts and others. Determination of the components of the cutting forces when machining with crossed axes of the milling cutter and part in order to use the results when assigning machining modes. Methodology. Theoretical development of a modular mathematical model of the removal allowance process and shaping during milling of cylindrical surfaces was carried out using a matrix apparatus for converting coordinate systems. Unified modules were developed: instrumental, orientation and shaping, which allowed us to describe the processing of the part more clearly. All calculations were performed in the mathematical package Mathcad. Using the functions available in the package, a graphical representation of the mathematical model of the tool and machined surfaces was obtained. Using the logical blocks developed in the program, the characteristics of the treated surface were investigated, such as roughness in the axial and radial planes. The influence of the tool orientation angle and the number of cutter teeth on the roughness of the machined surface was investigated. The known formulas for calculating the cutting forces during milling are specified. Findings. A general modular mathematical spatial model is constructed of the removal process of an allowance and formation at milling by the oriented tool of round surfaces of rotation, such as necks of camshafts, cylindrical surfaces of shafts of transmissions and others. The roughness parameters of the treated surface are determined. The outflow of the tool characteristics and the angle of its orientation on the geometric roughness in the axial and radial sections is investigated. The area of the layer cut off by one tooth of a mill is defined. The calculation formulas are specified for finding the components of cutting forces during milling. Originality. A modular spatial model of the process of milling cylindrical surfaces with an oriented tool is proposed, on the basis of which the components of cutting forces are calculated, which can be used in designing new tools and improving machining conditions by the existing ones. Practical value. Based on the use of modern computer facilities and software, the developed calculation program allows controlling the process of forming cylindrical surfaces during their milling with an oriented tool. It also allows predicting the initial machining accuracy by determining the parameters of geometric roughness in axial and radial sections. This makes it possible to choose the optimal tool orientation angle, milling cutter parameters and cutting modes to achieve high productivity and processing quality.

  • Open Access

    RESTORATION OF WOODEN DECORATIONS OF FACADES OF ANCIENT BUILDINGS IN CHERNIHIV

    by Sergiy Boіko, Chernihiv Polytechnic National University, Stanislav Ivashchenko, Andriy Yeroshenko, The Project Wooden Lace Of Chernihiv

    Urgency of the research. Increasing the productivity and level of automation of the process of manufacturing and restoration of elements of wooden architecture with the help of modern advanced equipment is one of the effective ways to revive the historic objects of wooden architecture in modern conditions.Target setting. The need to physically restore a large number of wooden carvings on the facades of historic buildings requires resources, both material and human. Therefore, the development of high-tech methods of restoring wood carvings on the historic facades of buildings, which save these resources is an urgent task in terms of ensuring high efficiency of machining of wood products and materials based on it.Actual scientific researches and issues analysis. Wooden carvings on the facades of houses used to be made by hand bya craftsman. Most of the existing literature and the recommendations given in it concern manual methods of manufacturing of a decor of facades, but considering a large number of repeating elements, they are not productive.Uninvestigated parts of general matters defining. Currently, there are a significant number of examples and proposals for the restoration of brick facades of historic buildings. Working with wooden facades decorated with carvings has its own features, which are not fully covered and require practical recommendations, taking into account the technical capabilities of modern equipment.The research objective ofthis article is to analyse the features of the use of modern technological equipment for manufacturing. and restoration of elements of wooden architecture.The statement of basic materials. The technology of production of wooden elements of decor of facades of houses by means of modern systems of the automated designing and CNC machines is considered. The influence on the nature of processing of processed materials, type of tool and processing modes is analysed.Conclusions. As part of the participation in the non-profit project "Wooden Lace of Chernihiv" for the first time used CNC machines and modern computer-aided design systems to restore the wooden architecture of Chernihiv region. The influence on the nature of processing of processed materials, type of tool and processing modes is analysed.

  • Determination of instantaneous temperature in the cutting zone during abrasive processing

    by V.V. Kalchenko, A.M. Yeroshenko, S.V. Boyko, P.L. Ignatenko

    Determination of instantaneous temperature in the cutting zone during abrasive processing


  • Open Access

    Crossing Axes of Workpiece and Tool at Grinding of the Circular Trough with Variable Profile

    by Volodimyr Kalchenko, Andrij Yeroshenko, Sergiy Boyko

    In the article the method of grinding with crossed axes of the tool and the workpiece got further developed. The work discloses a method of processing details having an external surface with a profile in the form of an arc of a circle of variable radius (for example, rolls of pipe rolling mills). The particular three-dimensional geometric models of the processing, shaping and profiling of abrasive wheels have been developed. A method for controlling the grinding process, which ensures the removal of allowances along equidistant curves has been offered. The developed method of grinding provides a constant depth of cutting according to the coordinate of profile processing. This is achieved at the expense of the synchronous inclination of the wheel and its insertion by the size of the allowance. The diameter of grinding wheel affects on the maximum angle of orientation of the wheel has been proven. It has been shown that increasing the diameter of the abrasive wheel has led to a slight decrease in value orientation angle.


  • Open Access

    Increasing of Energy Efficiency of Spindles with Fluid Bearings

    by Dmytro Fedorynenko, Serhii Sapon, Sergiy Boyko, Anastasiia Urlina

    Promising ways of energy efficiency gain of spindles with fluid flow bearings are offered. New design of journal hybrid flow bearing which contains spherical bearing pockets and adjustable valves with relay control system is offered to improve energy efficiency of spindle units of machine tools. To reduce power losses of fluid bearings at high speed special lubrication based on water with integrated system of corrosion protection is offered. Results of theoretical research of energy consumption of grinding machine tool with a new design of spindle hybrid bearings are presented. Power losses of the spindle unit with both new design and base design of journal bearings are assessed. Effectiveness of new design of spindle hybrid bearings at high operating speeds is shown.


  • Open Access

    Determination of Cutting Forces in Grinding with Crossed Axes of Tool and Workpiece

    by Volodimyr Kalchenko, Andrij Yeroshenko, Sergiy Boyko, Nataliia Sira

    In the work the analysis of existent methods of determination of local and general forces of cutting at polishing of surfaces with a type as the arc of circumference is given. The dependence for determination of speed polishing and method for determination of thickness of the cut away layer on condition of equality of the tricked into and taken off volumes of material are offered. The method of determination of cutting forces, which takes into account cutting and deforming grain, is suggested. The method of determining the thickness of a cutting layer of one of the cutting edge, from the condition that the volume of material that is brought and is cut in each local point of contact spots has been proposed. The proposed method takes into account the compliance of the processing system and the discontinuity of the abrasive surface of the tool. By experimental way upper limits of thickness cutting layer when using different abrasive materials for a wide range of cutting speeds have been obtained.


  • Open Access

    Accuracy of Spindle Units with Hydrostatic Bearings

    by Dmytro Fedorynenko, Serhii Sapon, Sergiy Boyko

    The work is devoted to the research of precision regularities in a spindle unit by the trajectory of the spindle installed on hydrostatic bearings. The mathematical model of trajectories spindle with lumped parameters that allows to define the position of the spindle with regard the simultaneous influence of design parameters, geometrical deviations ofform, temperature deformation bearing surfaces, the random nature of operational parameters and technical loads of hydrostatic bearings has been developed. Based on the results of numerical modeling the influence of shape errors of bearing surface of hydrostatic bearing on the statistical characteristics of the radius vector trajectories of the spindle by varying the values rotational speed of the spindle and oil pressure in front hydrostatic bearing has been developed. The obtained statistical regularities of precision spindle unit have been confirmed experimentally. It has been shown that an effective way to increase the precision of spindle units is to regulate the size of the gap in hydrostatic spindle bearings. The new design of an adjustable hydrostatic bearing, which can improve the accuracy of regulation size gap has been proposed.