PKPhilippe Kirsch

Philippe Kirsch

*This is an algorithmically generated author record based on publicly available information.

Philippe Kirsch has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Etude et réalisation par lithographie électronique de dispositifs à ondes acoustiques de surface à structure multicouche : des filtres pour la bande X aux capteurs de liquide

    by Philippe Kirsch

    Après beaucoup de travail, de nombreuses heures de réflexion, d'idées à améliorer et, des fois, à rejeter, une quantité innombrable d'échantillons et d'heures passés sur les différentes installations, nous voilà au point de présenter les résultats de tous ces efforts. Tout au début, nous avions décidé de se lancer dans la recherche et le développement de dispositifs à ondes acoustiques de surface pouvant servir en tant que filtres électriques passe-bande pour les nouvelles technologies de télécommunication et en tant que capteurs de liquide. Nous avons commencé à faire l'inventaire des tous les domaines que nous allions aborder lors de nos travaux de recherche, en nous en avons présenté ce qui nous semblait important. Même si la science est le pilier principal de cette thèse, nous nous sommes assurés que nos efforts ne seraient pas vains dès le départ en analysant les besoins industriels, et donc indirectement les retombées économiques possibles, en dispositifs à ondes acoustiques de surface. Nous nous sommes donc dotés de tous les outils nécessaires pour pouvoir avancer : Nous avons étudié l'évolution des dispositifs à ondes acoustiques de surface afin de reconnaître, avec un peu de chance, des tendances et de nouvelles ouvertures. Nous avons élucidé la partie théorique correspondante, au niveau de la piézoélectricité et des ondes acoustiques de surface. Nous avons fait le tour des matériaux piézoélectriques utilisées pour se faire une idée des leurs propriétés pour pouvoir faire, le moment venu, une sélection judicieuse selon les besoins de l'application. En partant de la théorie générale des ondes acoustiques de surface, nous avons étudié les différents types d'ondes existants dans la même optique : Disposer d'une multitude intéressante de choix possibles pour trouver la bonne solution à la fin.

  • Physical understanding of graphene/metal hetero-contacts to enhance MoS2 field-effect transistors performance

    by Y. Du, L. Yang, J. Zhang, H. Liu, K. Majumdar, P. D. Kirsch, P. D. Ye

    Semiconducting transition metal dichalcogenide (TMD) is a promising two-dimensional material with a potential for next-generation nanoelectronic applications [1-3]. One of the most studied TMD materials, MoS 2 , has become an emerging candidate in the field of flexible electronics. In this report, a monolayer graphene is sandwiched between the metal contact and the few-layer n-type MoS 2 film to form hetero-contacts, which enhances the electronic coupling between metal and MoS 2 and boost the electron injection into MoS 2 , leading to a significant contact resistance reduction [4,5]. Over 70 devices are studied to obtain a comprehensive description of electrical performance on hetero-contacts devices. We further apply the transfer length method (TLM) on graphene/metal hetero-contacts devices to accurately extract the contact resistance and compare the results with direct metal contact devices. For both Ti and Pd metal contacts, 3.3 times and 4.5 times reduction in contact resistance from hetero-contacts have been achieved, respectively. Moreover, we study the band alignment of graphene/metal hetero-contacts on MoS 2 to provide physical insights into the contact resistance reduction using graphene.


  • Development of a new Love wave liquid sensor operating at 2GHz achieved by electron beam lithography using an integrated micro-flow channel: The liquichip system

    by P. Kirsch, M. B. Assouar, P. Alnot

    SAW devices based on waveguide modes with shear horizontal polarization (Love modes) are very promising for sensor applications, especially in liquid media. We present here the realization of a 2 GHz operating frequency sensor based on SiO2/36Y-X LiTaO3 structure with integrated PDMS micro flow channel and using electron beam lithography to realize the submicronic interdigital transducers. Using our developed sensor operating at 2 GHz, we carried out alternate cycles of nitrogen and water circulating in the PDMS micro flow channel. We measured an absolute sensitivity of -19001 Hz.mm2/ng due to the interaction of the sensor with the water. This sensitivity is higher than that of other devices operating at lower frequencies. The detection mechanism, including gravimetric and permittivity effects at high frequency will be discussed.

  • Very high frequency SAW devices based on nanocrystalline diamond and aluminum nitride layered structure achieved using e-beam lithography

    by F. Bénédic, M.B. Assouar, P. Kirsch, D. Monéger, O. Brinza, O. Elmazria, P. Alnot, A. Gicquel


  • 4E-5 Study of Temperature Coefficient of Frequency and Electromechanical Coupling Coefficient of X Band Frequency SAW Devices Based on AlN/Diamond Layered Structure

    by M. B. Assouar, O. Elmazria, P. Kirsch, P. Alnot, V. Mortet

    In this work, we report about the study of electromechanical coupling coefficient (K2) and temperature coefficient of frequency (TCF) of SAW devices based on AIN/diamond layered structure intended for the X band (8 GHz). SAW devices operating in the range of 8 GHz were realized by the combination of the high velocity of the AIN/diamond layered structure and the high lateral resolution obtained using e-beam lithography (EBL). Due to high electrical resistivity of the AlN film, interdigital transducers with sub-micronic resolution were patterned by an adapted technological EBL process. The analyses of structural and morphological of the diamond and AlN layers by X-ray diffraction, atomic force microscopy (AFM) were carried out. They showed the highly (002) preferential orientation of AlN film deposited on diamond layer and a very weak surface roughness of less than 1 nm measured on the surface of AIN/diamond layered structure. The analysis of device performances in terms of K2 and temperature stability were carried out and discussed. The dispersion of both parameters as a function of normalized thickness of AlN layer (khAlN) was experimentally determined, and showed the obtaining of electromechanical coupling coefficient up to 1.4% for normalized thickness khAlN varying between 3 and 5. Concerning the TCF, the recorder values show a quasi- parabolic behavior. This TCF behavior in such high frequencies will discussed taking into account the nature of the TCF of AlN and diamond layers separately.

  • Combination of e-Beam Lithography and of High Velocity AlN/Diamond-Layered Structure for SAW Filters in X Band

    by Philippe Kirsch, Mohamed B. Assouar, Omar Elmazria, M. El Hakiki, Vincent Mortet, Patrick Alnot

    In this work, we report on the fabrication results of surface acoustic wave (SAW) devices operating at frequencies up to 8 GHz. In previous work, we have shown that high acoustic velocities (9 to 12 km/s) are obtained from the layered AIN/diamond structure. The interdigital transducers (IDT) made of aluminum with resolutions up to 250 nm were successfully patterned on AIN/diamond-layered structures with an adapted technological process. The uniformity and periodicity of IDT were confirmed by Held emission scanning electron microscopy and atomic force microscopy analyses. A highly oriented (002) piezoelectric aluminum nitride thin film was deposited on the nucleation side of the CVD diamond by magnetron sputtering technique. The X-ray diffraction effectuated on the AIN/diamond-layered structure exhibits high intensity peaks related to the (002) AlN and (111) diamond orientations. According to the calculated dispersion curves of velocity and the electromechanical coupling coefficient (K2), the AlN layer thickness was chosen in order to combine high velocity and high K2. Experimental data extracted from the fabricated SAW devices match with theoretical values quite well.


  • High-frequency surface acoustic wave devices based on AlN/diamond layered structure realized using e-beam lithography

    by M. B. Assouar, O. Elmazria, P. Kirsch, P. Alnot, V. Mortet, C. Tiusan

    We report in this paper on the study and the realization of surface acoustic wave devices based on an AlN/diamond layered structure intended for the X band (8 GHz). Both x-ray diffraction and transmission electronic microscopy, used for characterization of the structural properties of the AlN/diamond structure, have shown (002) highly oriented sputtered AlN films on free-standing chemical vapor deposition diamond films. Surface roughness of the AlN/diamond structure was measured by atomic force microscopy and showed a very low surface roughness, less than 1 nm. Low surface roughness is very important to reduce the acoustic propagation losses. SAW devices operating in the range of 8 GHz were realized by the combination of the high velocity of the AlN/diamond layered structure and the high lateral resolution obtained using e-beam lithography (EBL). Due to high electrical resistivity of the AlN film, interdigital transducers with submicronic resolution were patterned by an adapted technological EBL process. The analysis of device performances in terms of electromechanical coupling coefficient and temperature stability was carried out and discussed. The dispersion of both parameters as a function of wavelength was experimentally determined, and showed the obtention of an electromechanical coupling coefficient up to 1.4% and a temperature coefficient of frequency varying between 9 and 20 ppm/°C . The dispersion curves of phase velocity were also analyzed and experimental results show a good agreement with theoretical calculations.


  • 5 GHz surface acoustic wave devices based on aluminum nitride/diamond layered structure realized using electron beam lithography

    by P. Kirsch, M. B. Assouar, O. Elmazria, V. Mortet, P. Alnot

    Very high frequency surface acoustic wave (SAW) devices based on AlN/diamond layered structures were fabricated by direct writing using e-beam lithography on the nucleation side of chemical vapor deposition diamond. The interdigital transducers made in aluminum with resolutions down to 500nm were patterned on AlN/diamond layered structure with an adapted technological process. Experimental results show that the Rayleigh wave and the higher modes are generated. The fundamental frequency around 5GHz was obtained for this layered structure SAW device and agrees well with calculated results from dispersion curves of propagation velocity and electromechanical coupling coefficient.


  • P3O-1 5GHz SAW Devices Based on AlN/Diamond Layered Structure

    by O. Elmazria, P. Alnot, P. Kirsch, M. B. Assouar

    In this work, we report on the fabrication results of SAW devices operating at frequencies up to 8GHz. In previous work, we have shown that high acoustic velocity (9 to 12 km/s) is obtained from the layered AlN/diamond structure. The interdigital transducers (IDTs) made in aluminum with resolutions down to 300nm were successfully patterned on AlN/diamond layered structures with an adapted technological process. The uniformity and periodicity of IDTs were corroborated by field emission scanning electron microscopy and atomic force microscopy analyses. Highly oriented (002) piezoelectric aluminum nitride thin film was deposited on nucleation side of CVD diamond by magnetron sputtering technique. The X-ray diffraction made on the AlN/diamond layered structure exhibits high intensity peaks related to the (002) AlN and (111) diamond orientations. According to the calculated dispersion curves of velocity and electromechanical coupling coefficient (K2 ), the AlN layer thickness was chosen in order to combine high velocity and high K2. Thus, the expected values predicted by calculation match quite well the experimental data extracted from fabricated SAW device