4E-5 Study of Temperature Coefficient of Frequency and Electromechanical Coupling Coefficient of X Band Frequency SAW Devices Based on AlN/Diamond Layered Structure
Authors:
- M. B. AssouarMAM. B. Assouar
- O. ElmazriaO. Elmazria
- P. KirschPKP. Kirsch
- P. AlnotPAP. Alnot
- V. MortetVMV. Mortet
- 1 October 2007
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10510117,p. 284-287
Abstract
In this work, we report about the study of electromechanical coupling coefficient (K2) and temperature coefficient of frequency (TCF) of SAW devices based on AIN/diamond layered structure intended for the X band (8 GHz). SAW devices operating in the range of 8 GHz were realized by the combination of the high velocity of the AIN/diamond layered structure and the high lateral resolution obtained using e-beam lithography (EBL). Due to high electrical resistivity of the AlN film, interdigital transducers with sub-micronic resolution were patterned by an adapted technological EBL process. The analyses of structural and morphological of the diamond and AlN layers by X-ray diffraction, atomic force microscopy (AFM) were carried out. They showed the highly (002) preferential orientation of AlN film deposited on diamond layer and a very weak surface roughness of less than 1 nm measured on the surface of AIN/diamond layered structure. The analysis of device performances in terms of K2 and temperature stability were carried out and discussed. The dispersion of both parameters as a function of normalized thickness of AlN layer (khAlN) was experimentally determined, and showed the obtaining of electromechanical coupling coefficient up to 1.4% for normalized thickness khAlN varying between 3 and 5. Concerning the TCF, the recorder values show a quasi- parabolic behavior. This TCF behavior in such high frequencies will discussed taking into account the nature of the TCF of AlN and diamond layers separately.Keywords
This publication has 14 references indexed in Scilit:
- Effect of diamond nucleation process on propagation losses of AlN/diamond SAW filterIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2004
- Synthesis and microstructural characterisation of reactive RF magnetron sputtering AlN films for surface acoustic wave filtersDiamond and Related Materials, 2004
- SAW COM-parameter extraction in AlN/diamond layered structuresIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2003
- Structural characterisations of AlN/diamond structures used for surface acoustic wave device applicationsPhysica Status Solidi (a), 2003
- Surface acoustic wave propagation characteristics of aluminum nitride thin films grown on polycrystalline diamondJournal of Applied Physics, 2003
- Submicron technology for III-nitride semiconductorsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2002
- Surface acoustic wave propagation in aluminum nitride-unpolished freestanding diamond structuresApplied Physics Letters, 2002
- Effects of surface roughness on surface acoustic wave propagation in semiconductor materialsUltrasonics, 2002
- Nanotechnology for SAW devices on AlN epilayersMaterials Science and Engineering: B, 2002
- High Coupling and High Velocity SAW Using a ZnO/AlN/Glass Substrate1985