Kwabena Kan-Dapaah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kwabena Kan-Dapaah has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Abu Yaya
Department of Materials Science and Engineering, School of Engineering Sciences, CBAS, University of Ghana, Legon P.O. Box LG 77, Ghana
9 shared publications - Yvonne Kafui Konku-Asase
Department of Biomedical Engineering, School of Engineering Sciences, University of Ghana, Legon Accra P.O. Box LG 77, Ghana
4 shared publications - Bernard Owusu Asimeng
University of Ghana
2 shared publications - Bismark Mensah
University of Ghana
2 shared publications - Ivan B. Yeboah
Department of Biomedical Engineering, School of Engineering Sciences, University of Ghana, Legon, Accra P.O. Box LG 77, Ghana
2 shared publications - Samuel Kojo Kwofie
Department of Biomedical Engineering, School of Engineering Sciences, College of Basic and Applied Sciences, University of Ghana, Legon, Accra, Ghana
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 21 (1) , e70032
Magnetophoretic Drift of a Single Nanoparticle: From Langevin Theory to Atomistic Validation
An exact analytical expression is derived for the magnetic field gradient of a rectangular permanent magnet, and the mean magnetophoretic velocity is obtained from the overdamped Langevin equation under the constant gradient approximation. To challenge the underlying assumptions of point particle Stokes drag, neglect of thermal fluctuations in the mean drift, and constant gradient closure, a molecular dynamics framework is developed to simulate a faceted magnetite nanoparticle in explicit water with a spatially varying magnetic force applied directly to each iron atom. The simulations calibrate two effective parameters: an enhanced drag coefficient () due to faceting, and an effective magnetisation ( kA/m) that lies 12% below the bulk saturation value because of surface spin canting. The constant gradient approximation holds for displacements below 0.1 mm, beyond which a first‐order correction accounting for gradient decay yields a unified predictive model. Linear scaling with field strength permits direct extrapolation to experimental conditions. A parity plot across 50 state points gives , confirming the predictive power of the approach. The model provides design rules for magnetophoretic separators and is adaptable to arbitrary magnet geometries.
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 21 (1) , e70032
Open AccessMagnetophoretic Drift of a Single Nanoparticle: From Langevin Theory to Atomistic Validation
An exact analytical expression is derived for the magnetic field gradient of a rectangular permanent magnet, and the mean magnetophoretic velocity is obtained from the overdamped Langevin equation under the constant gradient approximation. To challenge the underlying assumptions of point particle Stokes drag, neglect of thermal fluctuations in the mean drift, and constant gradient closure, a molecular dynamics framework is developed to simulate a faceted magnetite nanoparticle in explicit water with a spatially varying magnetic force applied directly to each iron atom. The simulations calibrate two effective parameters: an enhanced drag coefficient () due to faceting, and an effective magnetisation ( kA/m) that lies 12% below the bulk saturation value because of surface spin canting. The constant gradient approximation holds for displacements below 0.1 mm, beyond which a first‐order correction accounting for gradient decay yields a unified predictive model. Linear scaling with field strength permits direct extrapolation to experimental conditions. A parity plot across 50 state points gives , confirming the predictive power of the approach. The model provides design rules for magnetophoretic separators and is adaptable to arbitrary magnet geometries.
- Open Access
- 3 March 2025
- Published by Elsevier in Scientific African
- Vol. 27
Ranking lecture-room furniture used in a Ghanaian University with students’ anthropometric data via multi-criteria decision making analysis
- 3 March 2025
- Published by Elsevier in Scientific African
- Vol. 27
Open AccessRanking lecture-room furniture used in a Ghanaian University with students’ anthropometric data via multi-criteria decision making analysis
- Open Access
- 1 January 2025
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2025 (1)
Multiphase Mixed Material Derived From Calcite and Diammonium Hydrogen Phosphate Coated With Tetraethyl Orthosilicate: A Potential Implant Coating Material
A multiphase mixed material (M‐PMM) made from calcite and diammonium hydrogen phosphate was prepared using the wet chemical method. To improve its bioactivity, the M‐PMM was coated with tetraethyl orthosilicate (TEOS) at varying mass percentages of 5% and 10% producing 5%_TEOS‐M‐PMM and 10%_TEOS‐M‐PMM, respectively. In vitro mineralization studies were conducted by immersing the uncoated M‐PMM, 5%_TEOS‐M‐PMM, and 10%_TEOS‐M‐PMM in simulated body fluid (SBF) for days 7, 14, and 21. Characterization of the uncoated and coated M‐PMM was performed using X‐ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersion X‐ray spectroscopy (EDS), X‐ray fluorescence (XRF), and scanning electron microscopy (SEM). The uncoated M‐PMM was confirmed to consist of multiple phases, including calcite, mixed type‐AB carbonate hydroxyapatite, and hydroxyapatite monoclinic2 by XRD and FTIR. EDS also confirmed the presence of silicon at the surface of the coated M‐PMM, whereas XRD showed a decrease in crystallinity and crystallite size. The crystallinity and crystallite size were 81% and 20.88 ± 5.12 nm for uncoated M‐PMM, respectively. The coated M‐PMM had values of 79% and 17.27 ± 9.06 nm and 78% and 19.83 ± 9.91 nm for 5%_TEOS‐M‐PMM and 10%_TEOS‐M‐PMM, respectively. The larger surface area of the coated M‐PMM in the SBF gave a better resorption of calcium and phosphate minerals, which was confirmed by XRF. Apatite‐like bundles in the uncoated M‐PMM and coated M‐PMM after immersion in SBF from day 7 to day 21 were revealed by SEM. However, additional cuboid structures were seen in the coated M‐PMM, which enhanced its cell viability and will aid in better osteointegration with biological tissues.
- 1 January 2025
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2025 (1)
Open AccessMultiphase Mixed Material Derived From Calcite and Diammonium Hydrogen Phosphate Coated With Tetraethyl Orthosilicate: A Potential Implant Coating Material
A multiphase mixed material (M‐PMM) made from calcite and diammonium hydrogen phosphate was prepared using the wet chemical method. To improve its bioactivity, the M‐PMM was coated with tetraethyl orthosilicate (TEOS) at varying mass percentages of 5% and 10% producing 5%_TEOS‐M‐PMM and 10%_TEOS‐M‐PMM, respectively. In vitro mineralization studies were conducted by immersing the uncoated M‐PMM, 5%_TEOS‐M‐PMM, and 10%_TEOS‐M‐PMM in simulated body fluid (SBF) for days 7, 14, and 21. Characterization of the uncoated and coated M‐PMM was performed using X‐ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersion X‐ray spectroscopy (EDS), X‐ray fluorescence (XRF), and scanning electron microscopy (SEM). The uncoated M‐PMM was confirmed to consist of multiple phases, including calcite, mixed type‐AB carbonate hydroxyapatite, and hydroxyapatite monoclinic2 by XRD and FTIR. EDS also confirmed the presence of silicon at the surface of the coated M‐PMM, whereas XRD showed a decrease in crystallinity and crystallite size. The crystallinity and crystallite size were 81% and 20.88 ± 5.12 nm for uncoated M‐PMM, respectively. The coated M‐PMM had values of 79% and 17.27 ± 9.06 nm and 78% and 19.83 ± 9.91 nm for 5%_TEOS‐M‐PMM and 10%_TEOS‐M‐PMM, respectively. The larger surface area of the coated M‐PMM in the SBF gave a better resorption of calcium and phosphate minerals, which was confirmed by XRF. Apatite‐like bundles in the uncoated M‐PMM and coated M‐PMM after immersion in SBF from day 7 to day 21 were revealed by SEM. However, additional cuboid structures were seen in the coated M‐PMM, which enhanced its cell viability and will aid in better osteointegration with biological tissues.
- Open Access
- 9 September 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (10)
Near-infrared irradiation study of honey-mediated Au nanoparticles for photothermal therapy
Gold nanoparticles synthesized via honey-mediated chemical reduction have desirable features that make them ideal candidates for nanoparticle-assisted photothermal therapy (N-PTT). However, their photothermal properties have not been previously explored. In this study, after synthesis and characterization (structural and optical) of the HM-AuNPs, we investigated their photothermal conversion efficiency (η) and absorption cross section (σabs) in aqueous solution, cytotoxic effects in in vitro MDA-MB-468 breast cancer cell culture, and temperature profiles in agarose gel under 810 nm NIR irradiation. The results showed that ≈15 nm and primarily spherical HM-AuNPs had η values of up to 40% and an average σabs of 2.15±0.08×10−18 m2. Furthermore, cell viability was reduced to about 52% and the temperature profile in agarose gel had the typical radially increasing topology. Collectively, the findings show that HM-AuNPs can be used in N-PTT.
- 9 September 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (10)
Open AccessNear-infrared irradiation study of honey-mediated Au nanoparticles for photothermal therapy
Gold nanoparticles synthesized via honey-mediated chemical reduction have desirable features that make them ideal candidates for nanoparticle-assisted photothermal therapy (N-PTT). However, their photothermal properties have not been previously explored. In this study, after synthesis and characterization (structural and optical) of the HM-AuNPs, we investigated their photothermal conversion efficiency (η) and absorption cross section (σabs) in aqueous solution, cytotoxic effects in in vitro MDA-MB-468 breast cancer cell culture, and temperature profiles in agarose gel under 810 nm NIR irradiation. The results showed that ≈15 nm and primarily spherical HM-AuNPs had η values of up to 40% and an average σabs of 2.15±0.08×10−18 m2. Furthermore, cell viability was reduced to about 52% and the temperature profile in agarose gel had the typical radially increasing topology. Collectively, the findings show that HM-AuNPs can be used in N-PTT.
- Open Access
Exploring Carbon Monoxide and Carbon Dioxide Adsorption on (5,5) Aluminum Nitride Nanotubes for Enhanced Sensor Applications: A DFT Study
This study examined the sensitivity of single-walled (5,5) aluminium nitride nanotubes ((5,5) AlNNTs) to carbon monoxide (CO) and carbon dioxide (CO2) gas molecules by performing DFT calculations using a hybrid functional, specifically, B3LYP (Becke’s three-parameter, Lee-Yang-Parr) exchange-correlation functional at a 6–31G* basis set. This research investigates the adsorption behavior of CO2 and CO molecules on pristine and silicon-doped aluminum nitride nanotubes (AlNNTs) and examines their implications for sensor applications. The study assesses each system’s adsorption energy, sensing potential, and recovery time to gain insights into their binding strength and practical viability. For CO2 adsorption on (5,5) AlNNT, significant adsorption energy of −24.36 kcal/mol was observed, indicating a strong binding to the nanotube surface, with a sensing potential of 8.95%. However, the slow recovery time of approximately 4.964 days may limit its real-time application. Si-(5,5) AlNNT exhibited a CO2 adsorption energy of −19.69 kcal/mol, a sensing potential of 5.40%, and a relatively short recovery time of approximately 2.978 min, making it a promising candidate for CO2 sensing. CO adsorption on (5,5) AlNNT showed an adsorption energy of −25.20 kcal/mol, a sensing potential of 9.095%, but a longer recovery time of approximately 20.130 days. Si-(5,5) AlNNT displayed a high CO adsorption energy of −20.78 kcal/mol, a sensing potential of 4.29%, and a recovery time of approximately 18.320 min. These findings provide insights into the adsorption characteristics of carbon molecules on AlNNTs, highlighting their potential for CO2 and CO sensing applications.
Open AccessExploring Carbon Monoxide and Carbon Dioxide Adsorption on (5,5) Aluminum Nitride Nanotubes for Enhanced Sensor Applications: A DFT Study
This study examined the sensitivity of single-walled (5,5) aluminium nitride nanotubes ((5,5) AlNNTs) to carbon monoxide (CO) and carbon dioxide (CO2) gas molecules by performing DFT calculations using a hybrid functional, specifically, B3LYP (Becke’s three-parameter, Lee-Yang-Parr) exchange-correlation functional at a 6–31G* basis set. This research investigates the adsorption behavior of CO2 and CO molecules on pristine and silicon-doped aluminum nitride nanotubes (AlNNTs) and examines their implications for sensor applications. The study assesses each system’s adsorption energy, sensing potential, and recovery time to gain insights into their binding strength and practical viability. For CO2 adsorption on (5,5) AlNNT, significant adsorption energy of −24.36 kcal/mol was observed, indicating a strong binding to the nanotube surface, with a sensing potential of 8.95%. However, the slow recovery time of approximately 4.964 days may limit its real-time application. Si-(5,5) AlNNT exhibited a CO2 adsorption energy of −19.69 kcal/mol, a sensing potential of 5.40%, and a relatively short recovery time of approximately 2.978 min, making it a promising candidate for CO2 sensing. CO adsorption on (5,5) AlNNT showed an adsorption energy of −25.20 kcal/mol, a sensing potential of 9.095%, but a longer recovery time of approximately 20.130 days. Si-(5,5) AlNNT displayed a high CO adsorption energy of −20.78 kcal/mol, a sensing potential of 4.29%, and a recovery time of approximately 18.320 min. These findings provide insights into the adsorption characteristics of carbon molecules on AlNNTs, highlighting their potential for CO2 and CO sensing applications.
- Open Access
- 14 March 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (6) , 955
Photothermally-Heated Superparamagnetic Polymeric Nanocomposite Implants for Interstitial Thermotherapy
Photothermally-heated polymer-based superparamagnetic nanocomposite (SNC) implants have the potential to overcome limitations of the conventional inductively-heated ferromagnetic metallic alloy implants for interstitial thermotherapy (IT). This paper presents an assessment of a model SNC—poly-dimethylsiloxane (PDMS) and FeO nanoparticles (MNP)—implant for IT. First, we performed structural and optical characterization of the commercially purchased MNPs, which were added to the PDMS to prepare the SNCs (MNP weight fraction wt.%) that were used to fabricate cubic implants. We studied the structural properties of SNC and characterized the photothermal heating capabilities of the implants in three different media: aqueous solution, cell (in-vitro) suspensions and agarose gel. Our results showed that the spherical MNPs, whose optical absorbance increased with concentration, were uniformly distributed within the SNC with no new bond formed with the PDMS matrix and the SNC implants generated photothermal heat that increased the temperature of deionized water to different levels at different rates, decreased the viability of MDA-MB-231 cells and regulated the lesion size in agarose gel as a function of laser power only, laser power or exposure time and the number of implants, respectively. We discussed the opportunities it offers for the development of a smart and efficient strategy that can enhance the efficacy of conventional interstitial thermotherapy. Collectively, this proof-of-concept study shows the feasibility of a photothermally-heated polymer-based SNC implant technique.- 14 March 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (6) , 955
Open AccessPhotothermally-Heated Superparamagnetic Polymeric Nanocomposite Implants for Interstitial Thermotherapy
Photothermally-heated polymer-based superparamagnetic nanocomposite (SNC) implants have the potential to overcome limitations of the conventional inductively-heated ferromagnetic metallic alloy implants for interstitial thermotherapy (IT). This paper presents an assessment of a model SNC—poly-dimethylsiloxane (PDMS) and FeO nanoparticles (MNP)—implant for IT. First, we performed structural and optical characterization of the commercially purchased MNPs, which were added to the PDMS to prepare the SNCs (MNP weight fraction wt.%) that were used to fabricate cubic implants. We studied the structural properties of SNC and characterized the photothermal heating capabilities of the implants in three different media: aqueous solution, cell (in-vitro) suspensions and agarose gel. Our results showed that the spherical MNPs, whose optical absorbance increased with concentration, were uniformly distributed within the SNC with no new bond formed with the PDMS matrix and the SNC implants generated photothermal heat that increased the temperature of deionized water to different levels at different rates, decreased the viability of MDA-MB-231 cells and regulated the lesion size in agarose gel as a function of laser power only, laser power or exposure time and the number of implants, respectively. We discussed the opportunities it offers for the development of a smart and efficient strategy that can enhance the efficacy of conventional interstitial thermotherapy. Collectively, this proof-of-concept study shows the feasibility of a photothermally-heated polymer-based SNC implant technique. - Open Access
Plasmonic Nanocomposite Implants for Interstitial Thermotherapy: Experimental and Computational Analysis
The ferromagnetic implant (thermoseeds) technique offers desirable features for interstitial thermotherapy. However, its efficacy has been reported to be limited by issues that are related to the properties of the metal alloys that are used to fabricate them and the high number of thermoseeds needed to achieve therapeutic temperature levels. Here, we present the results of a combination of experimental and computational analysis of plasmonic nanocomposite implants (photoseeds)—a combination of Au nanoparticles (NPs) and poly-dimethylsiloxane (PDMS)—as a model material. We performed structural and optical characterization of the Au NPs and repared Au-PDMS nanocomposites, followed by an elucidation of the heat generation capabilities of the Au-PDMS photoseeds in aqueous solution and in-vitro cancer cell suspension. Based on the experimental results, we developed a three-dimensional (3D) finite element method (FEM) model to predict in-vivo thermal damage profiles in breast tissue. The optical absorbance of the Au-PDMS photoseeds were increasing with the concentration of Au NPs. The photothermal measurements and the in-vivo predictions showed that the photothermal properties of the photoseeds, characteristics of the laser sources, and the duration of heating can be tuned to achieve therapeutic temperature levels under in-vitro and in-vivo conditions. Collectively, the results demonstrate the feasibility of using photoseeds for interstitial thermotherapy.
Open AccessPlasmonic Nanocomposite Implants for Interstitial Thermotherapy: Experimental and Computational Analysis
The ferromagnetic implant (thermoseeds) technique offers desirable features for interstitial thermotherapy. However, its efficacy has been reported to be limited by issues that are related to the properties of the metal alloys that are used to fabricate them and the high number of thermoseeds needed to achieve therapeutic temperature levels. Here, we present the results of a combination of experimental and computational analysis of plasmonic nanocomposite implants (photoseeds)—a combination of Au nanoparticles (NPs) and poly-dimethylsiloxane (PDMS)—as a model material. We performed structural and optical characterization of the Au NPs and repared Au-PDMS nanocomposites, followed by an elucidation of the heat generation capabilities of the Au-PDMS photoseeds in aqueous solution and in-vitro cancer cell suspension. Based on the experimental results, we developed a three-dimensional (3D) finite element method (FEM) model to predict in-vivo thermal damage profiles in breast tissue. The optical absorbance of the Au-PDMS photoseeds were increasing with the concentration of Au NPs. The photothermal measurements and the in-vivo predictions showed that the photothermal properties of the photoseeds, characteristics of the laser sources, and the duration of heating can be tuned to achieve therapeutic temperature levels under in-vitro and in-vivo conditions. Collectively, the results demonstrate the feasibility of using photoseeds for interstitial thermotherapy.
- Open Access
Comparative Study of Phosgene Gas Sensing Using Carbon and Boron Nitride Nanomaterials—A DFT Approach
Phosgene (COCl2), a valuable industrial compound, maybe a public safety and health risk due to potential abuse and possible accidental spillage. Conventional techniques suffer from issues related to procedural complexity and sensitivity. Therefore, there is a need for the development of simple and highly sensitive techniques that overcome these challenges. Recent advances in nanomaterials science offer the opportunity for the development of such techniques by exploiting the unique properties of these nanostructures. In this study, we investigated the potential of six types of nanomaterials: three carbon-based ([5,0] CNT, C60, C70) and three boron nitride-based (BNNT, BN60, BN70) for the detection of COCl2. The local density approximation (LDA) approach of the density functional theory (DFT) was used to estimate the adsorption characteristics and conductivities of these materials. The results show that the COCl2 molecule adsorbed spontaneously on the Fullerene or nanocages and endothermically on the pristine zigzag nanotubes. Using the magnitude of the bandgap modulation, the order of suitability of the different nanomaterials was established as follows: PBN60 (0.19%) < PC70 (1.39%) < PC60 (1.77%) < PBNNT (27.64%) < PCNT (65.29%) < PBN70 (134.12%). Since the desired criterion for the design of an electronic device is increased conductivity after adsorption due to the resulting low power consumption, PC60 was found to be most suitable because of its power consumption as it had the largest decrease of 1.77% of the bandgap.
Open AccessComparative Study of Phosgene Gas Sensing Using Carbon and Boron Nitride Nanomaterials—A DFT Approach
Phosgene (COCl2), a valuable industrial compound, maybe a public safety and health risk due to potential abuse and possible accidental spillage. Conventional techniques suffer from issues related to procedural complexity and sensitivity. Therefore, there is a need for the development of simple and highly sensitive techniques that overcome these challenges. Recent advances in nanomaterials science offer the opportunity for the development of such techniques by exploiting the unique properties of these nanostructures. In this study, we investigated the potential of six types of nanomaterials: three carbon-based ([5,0] CNT, C60, C70) and three boron nitride-based (BNNT, BN60, BN70) for the detection of COCl2. The local density approximation (LDA) approach of the density functional theory (DFT) was used to estimate the adsorption characteristics and conductivities of these materials. The results show that the COCl2 molecule adsorbed spontaneously on the Fullerene or nanocages and endothermically on the pristine zigzag nanotubes. Using the magnitude of the bandgap modulation, the order of suitability of the different nanomaterials was established as follows: PBN60 (0.19%) < PC70 (1.39%) < PC60 (1.77%) < PBNNT (27.64%) < PCNT (65.29%) < PBN70 (134.12%). Since the desired criterion for the design of an electronic device is increased conductivity after adsorption due to the resulting low power consumption, PC60 was found to be most suitable because of its power consumption as it had the largest decrease of 1.77% of the bandgap.
- Open Access
Stacking Interactions of Poly Para-Phenylene Vinylene Oligomers with Graphene and Single-Walled Carbon Nanotubes: A Molecular Dynamics Approach
This study is meant to address the understanding of the interactions between poly para-phenylene vinylene (PPV) oligomers, graphene and single-walled carbon nanotubes (SWCNT). To this end, the binding energies of the PPV oligomers with graphene and SWCNTs were investigated. Calculations are performed and the parameters related to van der Waal vdW interactions are discussed to achieve and confirm the crystallization of oligomers of PPV into herringbone (HB) structure arrangement, which is known to be the most stable conformation at 300 K. Finally, the interfacial interactions between crystal PPV, graphene and SWCNT are carried out. According to the results, the intramolecular potential energies of PPV chains are found to increase linearly with each extending PPV monomer unit by approximately 50 kcal/mol. Moreover, the interfacial interaction properties analysis using radial distribution functions (RDFs) for PPV-graphene and PPV-SWCNT show significant disordering of the arrangement of molecules, which is more pronounced for PPV-SWCNT than that in PPV-graphene. The radius of gyration () profiles show a net decrease of , for PPV-graphene with different surface coverage, and, a net increase of , for PPV-SWCNT; meaning that, the binding between PPV-graphene is much stronger than with PPV-SWCNT.Open AccessStacking Interactions of Poly Para-Phenylene Vinylene Oligomers with Graphene and Single-Walled Carbon Nanotubes: A Molecular Dynamics Approach
This study is meant to address the understanding of the interactions between poly para-phenylene vinylene (PPV) oligomers, graphene and single-walled carbon nanotubes (SWCNT). To this end, the binding energies of the PPV oligomers with graphene and SWCNTs were investigated. Calculations are performed and the parameters related to van der Waal vdW interactions are discussed to achieve and confirm the crystallization of oligomers of PPV into herringbone (HB) structure arrangement, which is known to be the most stable conformation at 300 K. Finally, the interfacial interactions between crystal PPV, graphene and SWCNT are carried out. According to the results, the intramolecular potential energies of PPV chains are found to increase linearly with each extending PPV monomer unit by approximately 50 kcal/mol. Moreover, the interfacial interaction properties analysis using radial distribution functions (RDFs) for PPV-graphene and PPV-SWCNT show significant disordering of the arrangement of molecules, which is more pronounced for PPV-SWCNT than that in PPV-graphene. The radius of gyration () profiles show a net decrease of , for PPV-graphene with different surface coverage, and, a net increase of , for PPV-SWCNT; meaning that, the binding between PPV-graphene is much stronger than with PPV-SWCNT. - Open Access
- 24 August 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (17) , 5844
Destruction of Fibroadenomas Using Photothermal Heating of Fe3O4 Nanoparticles: Experiments and Models
Conventionally, observation (yearly breast imaging) is preferred to therapy to manage small-sized fibroadenomas because they are normally benign tumors. However, recent reports of increased cancer risk coupled with patient anxiety due to fear of malignancy motivate the need for non-aggressive interventions with minimal side-effects to destroy such tumors. Here, we describe an integrated approach composed of experiments and models for photothermal therapy for fibroadenomas destruction. We characterized the optical and structural properties and quantified the heat generation performance of FeO nanoparticles (NPs) by experiments. On the basis of the optical and structural results, we obtained the optical absorption coefficient of the FeO NPs via predictions based on the Mie scattering theory and integrated it into a computational model to predict in-vivo thermal damage profiles of NP-embedded fibroadenomas located within a multi-tissue breast model and irradiated with near-infrared 810 nm laser. In a series of temperature-controlled parametric studies, we demonstrate the feasibility of NP-mediated photothermal therapy for the destruction of small fibroadenomas and the influence of tumor size on the selection of parameters such as NP concentration, treatment duration and irradiation protocols (treatment durations and laser power). The implications of the results are then discussed for the development of an integrated strategy for a noninvasive photothermal therapy for fibroadenomas.- 24 August 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (17) , 5844
Open AccessDestruction of Fibroadenomas Using Photothermal Heating of Fe3O4 Nanoparticles: Experiments and Models
Conventionally, observation (yearly breast imaging) is preferred to therapy to manage small-sized fibroadenomas because they are normally benign tumors. However, recent reports of increased cancer risk coupled with patient anxiety due to fear of malignancy motivate the need for non-aggressive interventions with minimal side-effects to destroy such tumors. Here, we describe an integrated approach composed of experiments and models for photothermal therapy for fibroadenomas destruction. We characterized the optical and structural properties and quantified the heat generation performance of FeO nanoparticles (NPs) by experiments. On the basis of the optical and structural results, we obtained the optical absorption coefficient of the FeO NPs via predictions based on the Mie scattering theory and integrated it into a computational model to predict in-vivo thermal damage profiles of NP-embedded fibroadenomas located within a multi-tissue breast model and irradiated with near-infrared 810 nm laser. In a series of temperature-controlled parametric studies, we demonstrate the feasibility of NP-mediated photothermal therapy for the destruction of small fibroadenomas and the influence of tumor size on the selection of parameters such as NP concentration, treatment duration and irradiation protocols (treatment durations and laser power). The implications of the results are then discussed for the development of an integrated strategy for a noninvasive photothermal therapy for fibroadenomas.