Felipe Silva Semaan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Felipe Silva Semaan has a total of 158 co-authors. Here are the top co-authors by number of shared publications:
- Eduardo Ariel Ponzio
Universidade Federal Fluminense
8 shared publications - Rafael Machado Dornellas
Fluminense Federal University
8 shared publications - Éder Tadeu Gomes Cavalheiro
Instituto de Química de São Carlos, Universidade de São Paulo, São Carlos, SP, Brazil
6 shared publications - Daniela de Luna Martins
Laboratório de Catálise e Síntese (LabCSI), Departamento de Química Orgânica, Instituto de Química, Universidade Federal Fluminense, Outeiro de São João Batista s/n, Campus do Valonguinho, Centro, Niterói 24020-141, RJ, Brazil
4 shared publications - Robson Pacheco Pereira
Instituto Militar de Engenharia
4 shared publications Amanda G. Batista
Institute of Chemistry, Fluminense Federal University, Niterói, 24020-141, RJ, Brazil
3 shared publications
Latest Publications
- Open Access
- 5 October 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (41) , 30646-30662
Hydrophobic Microfibrillated Cellulose Aerogels via Dual-Silane Modification for Sustainable Oil Spill Recovery
Oil spills in marine waters threaten sensitive ecosystems. This highlights the need for effective cleanup methods. While cellulose-based aerogels absorb oil effectively, improving their water resistance without compromising their eco-friendliness remains essential. This study aims to produce hydrophobic aerogels by combining methyltrimethoxysilane (MTMS) and octadecyltrimethoxysilane (OTMS) to create a hierarchical surface with low surface energy and high hydrophobicity. The goal is to modify them and compare their performance with bleached and brown microfibrillated cellulose (MFC). The resulting aerogels have water contact angles of 133.68° ± 1.16° and show excellent selective oil absorption. The bleached MFC aerogel has absorption capacities of 20.2 g g–1 for cooking oil, 15.6 g g–1 for diesel, and 13.3 g g–1 for petroleum, with low water absorption of 5.2 g g–1. In comparison, the brown MFC aerogel performs similarly, absorbing 17.1 g g–1 for cooking oil, 14.9 g g–1 for diesel, and 12.4 g g–1 for petroleum, with even lower water absorption (0.5 g g–1). These renewable MFC aerogels selectively take up oil from oil–water systems and provide a laboratory-scale basis for further evaluation in remediation settings such as Guanabara Bay.
- 5 October 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (41) , 30646-30662
Open AccessHydrophobic Microfibrillated Cellulose Aerogels via Dual-Silane Modification for Sustainable Oil Spill Recovery
Oil spills in marine waters threaten sensitive ecosystems. This highlights the need for effective cleanup methods. While cellulose-based aerogels absorb oil effectively, improving their water resistance without compromising their eco-friendliness remains essential. This study aims to produce hydrophobic aerogels by combining methyltrimethoxysilane (MTMS) and octadecyltrimethoxysilane (OTMS) to create a hierarchical surface with low surface energy and high hydrophobicity. The goal is to modify them and compare their performance with bleached and brown microfibrillated cellulose (MFC). The resulting aerogels have water contact angles of 133.68° ± 1.16° and show excellent selective oil absorption. The bleached MFC aerogel has absorption capacities of 20.2 g g–1 for cooking oil, 15.6 g g–1 for diesel, and 13.3 g g–1 for petroleum, with low water absorption of 5.2 g g–1. In comparison, the brown MFC aerogel performs similarly, absorbing 17.1 g g–1 for cooking oil, 14.9 g g–1 for diesel, and 12.4 g g–1 for petroleum, with even lower water absorption (0.5 g g–1). These renewable MFC aerogels selectively take up oil from oil–water systems and provide a laboratory-scale basis for further evaluation in remediation settings such as Guanabara Bay.
- 7 June 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 536
Exfoliated carbon nitride/graphite composite embedded in a thermoplastic matrix for high-performance voltammetric sensing
- 7 June 2025
- Published by Elsevier in Electrochimica Acta
- Vol. 536
Exfoliated carbon nitride/graphite composite embedded in a thermoplastic matrix for high-performance voltammetric sensing
- 1 January 2023
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
- Vol. 34 (12) , 1788-1795
Epoxy/Graphite Composite Electrode Modified with Recycled Silver Nanoparticles: An Eco-Friendly Strategy to Improve Lead Detection
In this work, silver nanoparticles (AgNPs) obtained from photographic waste were synthesized and electrodeposited via cyclic voltammetry using epoxy-graphite composite as an electrochemical substrate. Both electrodes, unmodified (Epoxy/C) and modified (Epoxy/C/AgNPs), were characterized electrochemically by electrochemical impedance spectroscopy (EIS), charge transfer constant (K0 ), and electroactive area. The modified electrode provided lower charge transfer resistance (275 Ω), more kinetically favored electron transfer (K0 = 1.15 × 10-3 cm s-1), and a 1.7- fold increase in the active area compared to the unmodified electrode. Additional characterizations by scanning electron microscopy (SEM) and Raman spectroscopy confirmed the presence of AgNPs structures on the carbonaceous surface. As a proof of concept, Pb2+ was used as a model analyte, and a square wave anodic stripping voltammetry (SWASV) method was developed to evaluate the analytical performance of both electrodes. A wider linear range (4.0 to 40.0 µg L-1), the appropriate limit of detection (1.2 µg L-1), and a 6-fold increase in sensitivity were found using the modified electrode, suggesting that the AgNPs significantly contributed to the performance of the electrode. The proposed method was applied to three real water samples, where the Pb2+ levels varied from 11.3 to 19.5 µg L-1. The proposed protocol (reuse of silver waste) has proven to be a powerful tool for improving the detection of Pb2+, which can be helpful for other electrochemical sensing applications in locations with minimal infrastructure.
- 1 January 2023
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
- Vol. 34 (12) , 1788-1795
Epoxy/Graphite Composite Electrode Modified with Recycled Silver Nanoparticles: An Eco-Friendly Strategy to Improve Lead Detection
In this work, silver nanoparticles (AgNPs) obtained from photographic waste were synthesized and electrodeposited via cyclic voltammetry using epoxy-graphite composite as an electrochemical substrate. Both electrodes, unmodified (Epoxy/C) and modified (Epoxy/C/AgNPs), were characterized electrochemically by electrochemical impedance spectroscopy (EIS), charge transfer constant (K0 ), and electroactive area. The modified electrode provided lower charge transfer resistance (275 Ω), more kinetically favored electron transfer (K0 = 1.15 × 10-3 cm s-1), and a 1.7- fold increase in the active area compared to the unmodified electrode. Additional characterizations by scanning electron microscopy (SEM) and Raman spectroscopy confirmed the presence of AgNPs structures on the carbonaceous surface. As a proof of concept, Pb2+ was used as a model analyte, and a square wave anodic stripping voltammetry (SWASV) method was developed to evaluate the analytical performance of both electrodes. A wider linear range (4.0 to 40.0 µg L-1), the appropriate limit of detection (1.2 µg L-1), and a 6-fold increase in sensitivity were found using the modified electrode, suggesting that the AgNPs significantly contributed to the performance of the electrode. The proposed method was applied to three real water samples, where the Pb2+ levels varied from 11.3 to 19.5 µg L-1. The proposed protocol (reuse of silver waste) has proven to be a powerful tool for improving the detection of Pb2+, which can be helpful for other electrochemical sensing applications in locations with minimal infrastructure.
- 1 March 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (3) , 037525
Determination of Saccharin through a Carbon Paste Sensor Modified by Electrodeposition of Silver Film
Saccharin is a synthetic artificial sweetener, widely used in several dietary products. In this work, a graphite and paraffin-based composite electrode (80% m m −1 in graphite) modified by electrodeposition of silver film was developed to quantify saccharin in samples of commercial sweeteners through cyclic voltammetry. The electrodeposition step consisted of the application of −0.6 V (vs Ag∣AgCl sat ∣KCl sat ) for 8 min under gentle stirring, with the electrode immersed in a solution containing 0.05 mol l −1 silver nitrate. The quantification occurred by cyclic voltammetry between −0.2 V to 0.8 V at 100 mV s −1 , the signal being observed at +0.2 V and having ammonium acetate and acetic acid as the electrolyte. For the optimized conditions, a linear behavior between 4 × 10 −5 and 9 × 10 −4 mol l −1 (R 2 > 0.99) was observed, with detection and quantification limits of 20.6 μ mol l −1 and 62.6 μ mol l −1 , respectively. To evaluate the accuracy, the strategies based on volumetric precipitation and gravimetry were used as comparison procedures in which both the obtained product (silver saccharinate) and the standard saccharin were characterized by different thermoanalytical (TGA-DTG) and spectroscopic techniques (FTIR). The results were compared by a chromatographic method described in the literature and the results were satisfactory and comparable.
- 1 March 2022
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 169 (3) , 037525
Determination of Saccharin through a Carbon Paste Sensor Modified by Electrodeposition of Silver Film
Saccharin is a synthetic artificial sweetener, widely used in several dietary products. In this work, a graphite and paraffin-based composite electrode (80% m m −1 in graphite) modified by electrodeposition of silver film was developed to quantify saccharin in samples of commercial sweeteners through cyclic voltammetry. The electrodeposition step consisted of the application of −0.6 V (vs Ag∣AgCl sat ∣KCl sat ) for 8 min under gentle stirring, with the electrode immersed in a solution containing 0.05 mol l −1 silver nitrate. The quantification occurred by cyclic voltammetry between −0.2 V to 0.8 V at 100 mV s −1 , the signal being observed at +0.2 V and having ammonium acetate and acetic acid as the electrolyte. For the optimized conditions, a linear behavior between 4 × 10 −5 and 9 × 10 −4 mol l −1 (R 2 > 0.99) was observed, with detection and quantification limits of 20.6 μ mol l −1 and 62.6 μ mol l −1 , respectively. To evaluate the accuracy, the strategies based on volumetric precipitation and gravimetry were used as comparison procedures in which both the obtained product (silver saccharinate) and the standard saccharin were characterized by different thermoanalytical (TGA-DTG) and spectroscopic techniques (FTIR). The results were compared by a chromatographic method described in the literature and the results were satisfactory and comparable.
- 29 October 2021
- Published by Springer Nature
- p. 241-248
Nanomaterials, Energy Devices and Defense: Metal Oxides and Supercapacitors
- 29 October 2021
- Published by Springer Nature
- p. 241-248
Nanomaterials, Energy Devices and Defense: Metal Oxides and Supercapacitors
- 29 October 2021
- Published by Springer Nature
- p. 249-258
Cellulose Acetate/ABS Blends as Insulating Phases for 3D Printing of Carbon-Based Composite Sensors
- 29 October 2021
- Published by Springer Nature
- p. 249-258
Cellulose Acetate/ABS Blends as Insulating Phases for 3D Printing of Carbon-Based Composite Sensors