Marie-Eve Aubin-Tam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marie-Eve Aubin-Tam has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Tam
Process & Energy, ME, TU Delft, Delft, The Netherlands
8 shared publications - Anne S. Meyer
University of Rochester
6 shared publications Srikkanth Balasubramanian
Department of Bionanoscience Kavli Institute of Nanoscience Delft University of Technology Van der Maasweg 9 Delft 2629 HZ The Netherlands
6 shared publications- Jeong-Joo Oh
Department of Bionanoscience, Kavli Institute of Nanoscience Faculty of Applied Sciences Delft University of Technology Delft Netherlands
4 shared publications Kui Yu
Department of Bionanoscience & Kavli Institute of Nanoscience, Delft University of Technology, 2629 HZ Delft, The Netherlands
4 shared publicationsRoland Kieffer
Department of Bionanoscience, Kavli Institute of Nanoscience, Delft University of Technology, Van der Maasweg 9, 2629 HZ, Delft, The Netherlands
4 shared publications
Latest Publications
- Open Access
- 22 October 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 10827
Light-powered photosynthetic living actuator
- 22 October 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 10827
Open AccessLight-powered photosynthetic living actuator
- Open Access
- 8 August 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (56)
Flax Composites With Improved Interfacial Strength Through Microbially Induced Mineral Precipitation
Driven by the needs of modern transportation and the clean energy transition, the demand for sustainable and lightweight materials is increasing. Composite materials incorporating natural fibers such as flax fibers have gained attention due to their carbon‐capturing potential and good specific mechanical properties. However, when embedded in hydrophobic polymer matrices, flax fibers exhibit inferior mechanical performance primarily due to their hydrophilic composition and discontinuous fiber architecture. Biological materials such as nacre have developed useful strategies through mineralization to distribute localized stresses and develop extrinsic toughness that could inspire a solution to enhance stress transfer in natural fiber composites. Here, we report a biomineralization strategy to introduce an additional hierarchy to flax composites. By tuning salt concentrations in the process, we achieve controlled deposition of microbe‐mediated mineral particles on flax yarns. With controlled biomineralization, we show that the minerals can enhance the compressive toughness by 178% and compressive strength by 30%. The findings highlight a novel bio‐inspired pathway for tailoring composite performance through sustainable processing, offering a scalable and environmentally friendly approach to enhance natural fiber composites for structural applications.
- 8 August 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (56)
Open AccessFlax Composites With Improved Interfacial Strength Through Microbially Induced Mineral Precipitation
Driven by the needs of modern transportation and the clean energy transition, the demand for sustainable and lightweight materials is increasing. Composite materials incorporating natural fibers such as flax fibers have gained attention due to their carbon‐capturing potential and good specific mechanical properties. However, when embedded in hydrophobic polymer matrices, flax fibers exhibit inferior mechanical performance primarily due to their hydrophilic composition and discontinuous fiber architecture. Biological materials such as nacre have developed useful strategies through mineralization to distribute localized stresses and develop extrinsic toughness that could inspire a solution to enhance stress transfer in natural fiber composites. Here, we report a biomineralization strategy to introduce an additional hierarchy to flax composites. By tuning salt concentrations in the process, we achieve controlled deposition of microbe‐mediated mineral particles on flax yarns. With controlled biomineralization, we show that the minerals can enhance the compressive toughness by 178% and compressive strength by 30%. The findings highlight a novel bio‐inspired pathway for tailoring composite performance through sustainable processing, offering a scalable and environmentally friendly approach to enhance natural fiber composites for structural applications.
- Open Access
- 3 February 2026
- Published by American Society for Microbiology in Microbiology Spectrum
- Vol. 14 (2) , e0250925
Discrete long-range on-cell motion of bacteriophage T4
The ability of a bacteriophage to distinguish between a suitable and a non-suitable bacterial host is critical for its survival. The series of events occurring between first contact and irreversible binding of a phage to its host is likely playing an essential role in the phage reproduction cycle. However, crucial information about the dynamic interaction between phages and bacterial cell surfaces is still lacking. Until now, most studies have focused on bulk measurements or on analyzing static interactions between phage and host using electron microscopy. These studies generally lack the ability to reveal the spatiotemporal dynamics that are key to understanding the “decision-making” process before the phage commits to infection. Here, we investigated nanoscopic on-cell dynamics using single-particle fluorescence microscopy, which allowed us to track the interaction between fluorescently labeled phage T4 and its host Escherichia coli B with high spatial and temporal resolution. We provide the first direct evidence that phage T4 exhibits long-range motion on or near the cell surface, facilitated by repeated shifts in mean positions of its tethering location. IMPORTANCE: We study the interaction of the virus bacteriophage T4 with bacteria. By tagging fluorescent dyes to bacteriophage T4, we can follow the movement of individual viruses when they approach the bacteria, which revealed that these bacteriophages perform a long-range walking motion on the surface of the bacteria.
- 3 February 2026
- Published by American Society for Microbiology in Microbiology Spectrum
- Vol. 14 (2) , e0250925
Open AccessDiscrete long-range on-cell motion of bacteriophage T4
The ability of a bacteriophage to distinguish between a suitable and a non-suitable bacterial host is critical for its survival. The series of events occurring between first contact and irreversible binding of a phage to its host is likely playing an essential role in the phage reproduction cycle. However, crucial information about the dynamic interaction between phages and bacterial cell surfaces is still lacking. Until now, most studies have focused on bulk measurements or on analyzing static interactions between phage and host using electron microscopy. These studies generally lack the ability to reveal the spatiotemporal dynamics that are key to understanding the “decision-making” process before the phage commits to infection. Here, we investigated nanoscopic on-cell dynamics using single-particle fluorescence microscopy, which allowed us to track the interaction between fluorescently labeled phage T4 and its host Escherichia coli B with high spatial and temporal resolution. We provide the first direct evidence that phage T4 exhibits long-range motion on or near the cell surface, facilitated by repeated shifts in mean positions of its tethering location. IMPORTANCE: We study the interaction of the virus bacteriophage T4 with bacteria. By tagging fluorescent dyes to bacteriophage T4, we can follow the movement of individual viruses when they approach the bacteria, which revealed that these bacteriophages perform a long-range walking motion on the surface of the bacteria.
- Open Access
- 27 January 2026
- Published by Zhejiang University Press in Bio-Design and Manufacturing
- Vol. 9 (1) , 182-196
Exploring the design potential of iridescent Flavobacteria for thermochromic engineered living materials
By leveraging the unique qualities of microorganisms, engineered living materials (ELMs) offer functional and economic advantages in everyday applications along with notable ecological benefits. This study contributes to the growing field of biodesign by examining the potential of Flavobacteria for thermochromic ELMs. Many Flavobacteria, commonly found in marine environments, produce iridescent structural colorations as their colonies expand on semi-solid surfaces through gliding motility. In this study, we analyzed the effects of temperature variations on flavobacterium Cellulophaga lytica PLY-A2, characterizing distinct changes in colony growth and iridescent colorations at a macroscopic and microscopic scale. Using scanning electron microscopy, we investigated the relationship between iridescent color and the underlying cell-based optical structures. By providing insights into the temperature-responsive behavior of Flavobacteria, our findings highlight their potential for future thermochromic ELMs—with applications ranging from sustainable food packaging to smart textiles—while encouraging further characterization studies within biodesign research.
- 27 January 2026
- Published by Zhejiang University Press in Bio-Design and Manufacturing
- Vol. 9 (1) , 182-196
Open AccessExploring the design potential of iridescent Flavobacteria for thermochromic engineered living materials
By leveraging the unique qualities of microorganisms, engineered living materials (ELMs) offer functional and economic advantages in everyday applications along with notable ecological benefits. This study contributes to the growing field of biodesign by examining the potential of Flavobacteria for thermochromic ELMs. Many Flavobacteria, commonly found in marine environments, produce iridescent structural colorations as their colonies expand on semi-solid surfaces through gliding motility. In this study, we analyzed the effects of temperature variations on flavobacterium Cellulophaga lytica PLY-A2, characterizing distinct changes in colony growth and iridescent colorations at a macroscopic and microscopic scale. Using scanning electron microscopy, we investigated the relationship between iridescent color and the underlying cell-based optical structures. By providing insights into the temperature-responsive behavior of Flavobacteria, our findings highlight their potential for future thermochromic ELMs—with applications ranging from sustainable food packaging to smart textiles—while encouraging further characterization studies within biodesign research.
- Open Access
- 4 November 2025
- Published by Springer Nature in Communications Materials
- Vol. 6 (1) , 1-11
Thermochromic hydrogel with high transmittance modulation and fast response for flexible smart windows
Growing environmental concerns are driving demand for energy-saving strategies. Thermochromic smart windows offer a practical solution by passively regulating sunlight in homes and offices. Despite recent progress, current technologies still face challenges in achieving the thermal durability and mechanical robustness necessary for long-term use, combined with a rapid transition below 30 °C. Here we report a thermochromic hydrogel assembled from poly(N,N-dimethylaminoethyl methacrylate) and 2,2,2-trifluoroethyl methacrylate that produces flexible films on a large scale. This hydrogel rapidly ( ~ 3 s) and reversibly becomes turbid above a tunable transition temperature spanning the human comfort zone, and maintains its thermochromic property even when mechanically stretched with 500% strain. The film’s high modulation of solar transmittance (70.6%) and luminous transmittance (85.7%) enables efficient sunlight screening in hot weather and clear vision in cool weather. Such ‘smart windows’ remain stable for over 10,000 heating/cooling cycles. These combined features indicate the hydrogel suitability for applications ranging from heat-modulating smart windows (architectural, automotive, etc.) to passive temperature indicators and even wearables.
- 4 November 2025
- Published by Springer Nature in Communications Materials
- Vol. 6 (1) , 1-11
Open AccessThermochromic hydrogel with high transmittance modulation and fast response for flexible smart windows
Growing environmental concerns are driving demand for energy-saving strategies. Thermochromic smart windows offer a practical solution by passively regulating sunlight in homes and offices. Despite recent progress, current technologies still face challenges in achieving the thermal durability and mechanical robustness necessary for long-term use, combined with a rapid transition below 30 °C. Here we report a thermochromic hydrogel assembled from poly(N,N-dimethylaminoethyl methacrylate) and 2,2,2-trifluoroethyl methacrylate that produces flexible films on a large scale. This hydrogel rapidly ( ~ 3 s) and reversibly becomes turbid above a tunable transition temperature spanning the human comfort zone, and maintains its thermochromic property even when mechanically stretched with 500% strain. The film’s high modulation of solar transmittance (70.6%) and luminous transmittance (85.7%) enables efficient sunlight screening in hot weather and clear vision in cool weather. Such ‘smart windows’ remain stable for over 10,000 heating/cooling cycles. These combined features indicate the hydrogel suitability for applications ranging from heat-modulating smart windows (architectural, automotive, etc.) to passive temperature indicators and even wearables.
- Open Access
- 10 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (41) , eadw8278
Bacterially grown living materials with resistant and on-demand functionality
Inspired by naturally occurring biomaterials, autonomously grown engineered living materials (ELMs) feature cell-driven growth and programmable biological functions. However, the “livingness” of cells poses a short life span and low tolerance to harsh conditions, limiting the practical use of such materials. Here, we developed materials with programmable and dormant functionalities, grown from a mixture of Komagataeibacter rhaeticus and Bacillus endospores under engineered medium conditions. K. rhaeticus produces the bacterial cellulose (BC) matrix that integrates Bacillus spores within, whereas the confined spores keep dormant and are resistant to harsh conditions in the environment. Bacillus spores can germinate and confer desired functions to the materials. Modulating the binding affinity of spores to the BC matrix with genetic engineering can improve cell loading and therefore enhance the material functionality. These materials can serve as a versatile on-demand platform for applications as biosensors, biocatalytic materials, and in situ transformation of mechanically robust cellulose-based composites.
- 10 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (41) , eadw8278
Open AccessBacterially grown living materials with resistant and on-demand functionality
Inspired by naturally occurring biomaterials, autonomously grown engineered living materials (ELMs) feature cell-driven growth and programmable biological functions. However, the “livingness” of cells poses a short life span and low tolerance to harsh conditions, limiting the practical use of such materials. Here, we developed materials with programmable and dormant functionalities, grown from a mixture of Komagataeibacter rhaeticus and Bacillus endospores under engineered medium conditions. K. rhaeticus produces the bacterial cellulose (BC) matrix that integrates Bacillus spores within, whereas the confined spores keep dormant and are resistant to harsh conditions in the environment. Bacillus spores can germinate and confer desired functions to the materials. Modulating the binding affinity of spores to the BC matrix with genetic engineering can improve cell loading and therefore enhance the material functionality. These materials can serve as a versatile on-demand platform for applications as biosensors, biocatalytic materials, and in situ transformation of mechanically robust cellulose-based composites.
- Open Access
- 6 March 2025
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 25 (7) , 1842-1853
Microfluidic system for efficient molecular delivery to artificial cell membranes
The cell membrane is a crucial biological interface to consider in biomedical research, as a significant proportion of drugs interacts with this barrier. While understanding membrane–drug interactions is important, existing in vitro platforms for drug screening predominantly focus on interactions with whole cells or tissues. This preference is partly due to the instability of membrane-based systems and the technical challenges associated with buffer replacement around lipid membranes formed on microfluidic chips. Here, we introduce a novel microfluidic design capable of forming stable freestanding lipid bilayers with efficient replacement of the media in their local environment for molecular delivery to the membrane. With the use of bubble traps and resistance channels, we achieved sufficient hydrodynamic control to maintain membrane stability during the membrane formation and the molecular delivery phases. As a proof of concept, we successfully formed 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) bilayers on the chip and delivered the antibiotic azithromycin at low (5 μM) and high (250 μM) doses. Using optical tweezers, we characterized how azithromycin influenced the membrane elastic properties, including tension and bending rigidity. This microfluidic device is a versatile tool that can deliver various buffers, molecules or nano-/microparticles to freestanding membranes, and study the resulting impact on the membranes' properties.
- 6 March 2025
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 25 (7) , 1842-1853
Open AccessMicrofluidic system for efficient molecular delivery to artificial cell membranes
The cell membrane is a crucial biological interface to consider in biomedical research, as a significant proportion of drugs interacts with this barrier. While understanding membrane–drug interactions is important, existing in vitro platforms for drug screening predominantly focus on interactions with whole cells or tissues. This preference is partly due to the instability of membrane-based systems and the technical challenges associated with buffer replacement around lipid membranes formed on microfluidic chips. Here, we introduce a novel microfluidic design capable of forming stable freestanding lipid bilayers with efficient replacement of the media in their local environment for molecular delivery to the membrane. With the use of bubble traps and resistance channels, we achieved sufficient hydrodynamic control to maintain membrane stability during the membrane formation and the molecular delivery phases. As a proof of concept, we successfully formed 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) bilayers on the chip and delivered the antibiotic azithromycin at low (5 μM) and high (250 μM) doses. Using optical tweezers, we characterized how azithromycin influenced the membrane elastic properties, including tension and bending rigidity. This microfluidic device is a versatile tool that can deliver various buffers, molecules or nano-/microparticles to freestanding membranes, and study the resulting impact on the membranes' properties.
- Open Access
- 21 February 2025
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 14 (2) , 307-315
Solving Challenges in Microalgae-Based Living Materials
Engineered living materials (ELMs) integrate aspects of material science and biology into a unique platform, leading to materials and devices with features of life. Among those, ELMs containing microalgae have received increased attention due to the many benefits photosynthetic organisms provide. Due to their relatively recent occurrence, photosynthetic ELMs still face many challenges related to reliability, lifetime, scalability, and more, often based on the complicated crosstalk of cellular, material-based, and environmental variables in time. This Viewpoint aims to summarize potential avenues for improving ELMs, beginning with an emphasis on understanding the cell’s perspective and the potential stresses imposed on them due to recurring flaws in many current ELMs. Potential solutions and their ease of implementation will be discussed, ranging from choice of organism, adjustments to the ELM design, to various genetic modification tools, so as to achieve ELMs with longer lifetime and improved functionality.
- 21 February 2025
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
- Vol. 14 (2) , 307-315
Open AccessSolving Challenges in Microalgae-Based Living Materials
Engineered living materials (ELMs) integrate aspects of material science and biology into a unique platform, leading to materials and devices with features of life. Among those, ELMs containing microalgae have received increased attention due to the many benefits photosynthetic organisms provide. Due to their relatively recent occurrence, photosynthetic ELMs still face many challenges related to reliability, lifetime, scalability, and more, often based on the complicated crosstalk of cellular, material-based, and environmental variables in time. This Viewpoint aims to summarize potential avenues for improving ELMs, beginning with an emphasis on understanding the cell’s perspective and the potential stresses imposed on them due to recurring flaws in many current ELMs. Potential solutions and their ease of implementation will be discussed, ranging from choice of organism, adjustments to the ELM design, to various genetic modification tools, so as to achieve ELMs with longer lifetime and improved functionality.
- Open Access
- 6 February 2025
- Published by Elsevier in Current Opinion in Biotechnology
- Vol. 92, 103265
Harnessing photosynthesis for materials, devices, and environmental technologies
- 6 February 2025
- Published by Elsevier in Current Opinion in Biotechnology
- Vol. 92, 103265
Open AccessHarnessing photosynthesis for materials, devices, and environmental technologies
- Open Access
- 30 October 2024
- Published by Elsevier in Trends in Biotechnology
- Vol. 43 (4) , 812-825
Leveraging the versatile properties of bacterial spores in materials
- 30 October 2024
- Published by Elsevier in Trends in Biotechnology
- Vol. 43 (4) , 812-825
Open AccessLeveraging the versatile properties of bacterial spores in materials