SDShahla Momeni Danaei

Shahla Momeni Danaei

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shahla Momeni Danaei has a total of 54 co-authors. Here are the top co-authors by number of shared publications:

  • Shoaleh Shahidi

    Biomaterial Research Center, Department of Oral and Maxillofacial Radiology, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran

    5 shared publications
  • Ahmadreza Sardarian

    Orthodontics Research Center, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran

    4 shared publications
  • Morteza Oshagh

    Shiraz Orthodontic Research Center, Dept. of Orthodontics, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran

    3 shared publications
  • Morteza Oshagh

    Department of Orthodontics, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran

    2 shared publications
  • P Salehi

    Shiraz Orthodontic Research Center, Department of Orthodontics, Faculty of Dentistry, Shiraz University of Medical Sciences, Shiraz, Islamic Republic of Iran

    2 shared publications
  • Parisa Salehi

    Shiraz Orthodontic Research Center, Dept. of Orthodontics, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran

    2 shared publications

Latest Publications

  • Skeletal maturation and the location of the mandibular foramen within the ramus mandibulae

    by Najmeh Movahhedian, Ahmadreza Sardarian, Arsalan Hosseini, Shahla Momeni Danaei, Shahram Hamedani

    Purpose It is well documented that the mandible does not grow at a constant rate. There are significant correlations between the increase of mandibular size and cervical vertebral maturation. The peak growth velocity of the mandible occurs after the third stage of cervical vertebral maturation. The location of the mandibular foramen (MF) and its changes subsequent to growth are of great interest to clinicians as they relate to the anesthesia of the inferior alveolar nerve and to mandibular surgical procedures. Therefore, the aim of the present study was to assess the influence of the mandibular growth spurt on the location of the MF in various skeletal growth patterns. Methods Panoramic and lateral cephalometric radiographs of 98 (32 orthognathic, 50 retrognathic, 16 prognathic) patients before and after the growth peak were collected. For each subject, the maturational stage of the cervical vertebrae was defined on successive lateral cephalograms and the vertical and horizontal position of the MF was evaluated on two panoramic radiographs, one before and one after the growth peak. Results The MF-Post/MF-Ant ratio (MF distance to the posterior border of the ramus/MF distance to the anterior border of the ramus) significantly increased after the growth peak in orthognathic and retrognathic subjects (P = 0.015 and 0.02, respectively). This ratio did not significantly increase in prognathic subjects (P = 0.882). No statistically significant changes in the vertical position of the MF were found in the three groups after the growth spurt. Conclusion The horizontal position of the MF moves in an anterior direction in orthognathic and retrognathic subjects during the mandibular growth spurt. The vertical position of the mandibular foramen remains unchanged during this period.


  • Open Access

    Bleaching during orthodontic treatment and its effect on bracket bond strength

    by Shahla Momeni Danaei, Ahmadreza Sardarian, Behnam Malekpour, Ali Roshan

    Background: This study investigated the effect of two different methods of bleaching during orthodontic treatment on bracket bond strength. Materials and Methods: A total of 45 extracted premolar teeth were selected in this experimental study and divided into three groups (office bleaching with 35% hydrogen peroxide, home bleaching with 22% carbamide peroxide, and control). The color of the teeth was assessed initially before the application of bleaching agents and Thermocycling. Orthodontic brackets were subsequently bonded on the treated surfaces. Bleaching procedures were then performed. A final color measurement was performed at two points on the buccal surface both underneath and adjacent to the bracket base. The initial and final color measurements and the bond strengths were compared between the groups using the analysis of variance. P < 0.05 was considered as statistically significant. Results: Bracket bond strength was significantly reduced in both bleaching groups compared with the control group (P < 0.01). The color difference before and after the bleaching procedures was significant in the office bleaching group (P < 0.01), while the control group did not demonstrate a statistical difference between initial and final color assessments (P > 0.05). Conclusion: Bleaching procedures performed during orthodontic treatment reduce bond strength. Enamel beneath the bracket base experiences a whitening effect though to a lesser degree compared with an uncovered surface.


    • 1 March 2016
      • Vol. 17  (1) , 7-15
    Open Access

    Evaluation of Anatomic Variations in Maxillary Sinus with the Aid of Cone Beam Computed Tomography (CBCT) in a Population in South of Iran

    by Shoaleh Shahidi, Barbad Zamiri, Shahla Momeni Danaei, Setareh Salehi, Shahram Hamedani

    Anatomic variations of the maxillary sinus can be detected in cone-beam computed tomography (CBCT) and may assist to locate the posterior superior alveolar artery (PSAA) and define the maxillary sinus morphology more accurately for a more strict surgical treatment plan. The study aimed to determine normal variations of the maxillary sinus with the aid of CBCT in a sample population in south of Iran. This cross-sectional prevalence study was based on evaluation of 198 projection data of CBCT scans of some Iranian patients aged 18-45 who referred to a private oral and maxillofacial radiology center in Shiraz from 2011 to 2013. CBCT scans were taken and analyzed with NewTom VGi device and software. The anatomic variations which were evaluated in the axial images included the presence of alveolar pneumatization, anterior pneumatization, exostosis, and hypoplasia. Moreover the location and height of sinus septa, and the location of PSAA were assessed. SPSS software (version 17.0) was used to analyze the data. In a total of 396 examined sinuses, maxillary sinus alveolar pneumatization was the most common anatomic variation detected. Anterior pneumatization was detected in 96 sinuses (24.2%). Antral septa were found in 180 sinuses (45.4%) and were mostly located in the anterior region. Meanwhile, PSAA was mostly detected intra-osseous in 242 sinuses (65.7%). Anatomic variations of the maxillary sinus were common findings in CBCT of the maxilla. Preoperative imaging with CBCT seems to be very helpful for assessing the location of PSAA and the maxillary sinus morphology, which may be used to adjust the surgical treatment plan to yield more successful treatments.


  • Open Access

    The impact of an educational pamphlet on the awareness of parents about 4‒6-year-old children’s oral habits and dentofacial discrepancies

    by Shahla Momeni Danaei, Fatemeh Faghihi, Ali Golkari, Maryam Saki

    The impact of an educational pamphlet on the awareness of parents about 4‒6-year-old children’s oral habits and dentofacial discrepancies


  • Open Access

    Evaluating the Perspective of Students at Shiraz School of Dentistry Regarding Standards of Professional Ethics and Patients’ Rights

    by Shahla Momeni Danaei, Hooman Zarifnajafi, Ali Nabavizade Rafsanjani, Farnaz Fakhri, Fatemeh Bahramnia, Ahmadreza Sardarian, Mahsa Nili

    Journal of Dentomaxillofacial مجله دانشکده دندانپزشکی دانشگاه علوم پزشکی گیلان

    • 1 September 2015
      • Vol. 16  (3) , 149-155
    Open Access

    An Analytical Study on an Orthodontic Index: Index of Complexity, Outcome and Need (ICON)

    by Sepide Torkan, Hamid Reza Pakshir, Hamid Reza Fattahi, Morteza Oshagh, Shahla Momeni Danaei, Parisa Salehi, Zohreh Hedayati

    The validity of the Index of Complexity, Outcome and Need (ICON) which is an orthodontic index developed and introduced in 2000 should be studied in different ethnic groups. The aim of this study was to perform an analysis on the ICON and to verify whether this index is valid for assessing both the need and complexity of orthodontic treatment in Iran. Five orthodontists were asked to score pre-treatment diagnostic records of 100 patients with a uniform distribution of different types of malocclusions determined by Dental Health Component of the Index of Treatment Need. A calibrated examiner also assessed the need for orthodontic treatment and complexity of the cases based on the ICON index as well as the Index of Orthodontic Treatment Need (IOTN). 10 days later, 25% of the cases were re-scored by the panel of experts and the calibrated orthodontist. The weighted kappa revealed the inter-examiner reliability of the experts to be 0.63 and 0.51 for the need and complexity components, respectively. ROC curve was used to assess the validity of the index. A new cut-off point was adjusted at 35 in lieu of 43 as the suggested cut-off point. This cut-off point showed the highest level of sensitivity and specificity in our society for orthodontic treatment need (0.77 and 0.78, respectively), but it failed to define definite ranges for the complexity of treatment. ICON is a valid index in assessing the need for treatment in Iran when the cut-off point is adjusted to 35. As for complexity of treatment, the index is not validated for our society. It seems that ICON is a well-suited substitute for the IOTN index.


  • Open Access

    Evaluating the clinical quality of departments as viewed by juniors and seniors of Shiraz dental school

    by ShahlaMomeni Danaei, Elham Mazareie, Sahar Hosseininezhad, Mahsa Nili

    Ng 23 questions. Reliability was assessed using α-Chronbach (α =0.87), and validity was confirmed by a group of five experts. Tukey test, Pearson correlation coefficient, and two sample t-tests were used for data analysis. Methods: This cross-sectional study was performed through a questionnaire comprising 23 questions. Reliability was assessed using α-Chronbach (α =0.87), and validity was confirmed by a group of five experts. Tukey test, Pearson correlation coefficient, and two sample t-tests were used for data analysis. Results: A total of 168 answered questionnaires were entered in our study. Maximum satisfaction in most items was shown in removable prosthodontics and orthodontics departments whereas oral surgery and comprehensive treatment departments acquired the least scores. In all departments, personnels’ respectful attitude had the highest score whereas minimum grade was given to stressful workload and overall satisfaction in each department. In comparison with a similar study, conducted 3 years ago, level of satisfaction was raised for orthodontics and removable prosthodontics departments though it was declined for the pediatrics department. Conclusion: The special cadre of clinical instructors comprising both experienced and young members is considered as an important factor leading to high student satisfaction in the orthodontics department. Promotion of a removable prosthodontics department is related to the high relevance between the implemented educational program and the curriculum. The moderate performance of oral surgery and restorative departments is indicative of the need for more attention from ministry authorities to major dental departments such as oral surgery, endodontic, restorative and periodontics, in order to increase the students’ scientific capability in these fields....


  • Measuring agreement between cervical vertebrae and hand-wrist maturation in determining skeletal age: Reassessing the theory in patients with short stature

    by Shahla Momeni Danaei, Amirali Karamifar, Ahmadreza Sardarian, Shoaleh Shahidi, Hamdollah Karamifar, Abbas Alipour, Sahar Ghodsi Boushehri


  • Open Access

    The effect of vertical bracket positioning on torque and the resultant stress in the periodontal ligament—a finite element study

    by Ahmadreza Sardarian, Shahla Momeni Danaei, Shoaleh Shahidi, Sahar Ghodsi Boushehri, Allahyar Geramy

    The ideal built-in tip and torque values of the straight wire appliance reduce the need for wire bending and hence reduce chair time. The vertical position of the bracket on the tooth surface can alter the torque exerted on the tooth. This is a result of the altered surface curvature observed at each vertical position. To further clarify the role of vertical bracket positioning on the applied torque and the resultant stresses in the periodontal ligament (PDL), we designed a mandibular first premolar using finite element modeling. Cone beam computed tomography of 52 patients (83 lower first premolars) was selected to be included in the study. Curvature was measured for points along the labial surface with increasing distances (0.5 mm increments) from the cusp tip by calculating the angle between tangents drawn from these points and the axis joining the cusp tip and the root apex. The mean values for each distance were calculated, and a finite element model was designed incorporating these mean values. The resultant stress and hydrostatic pressure in the PDL were calculated using finite element analysis. The labial surface of the mandibular first premolar demonstrated a 26.39° change from 2.5 to 6 mm from the cusp tip. The maximum Von-Mises stress and hydrostatic pressure in the PDL were observed at the root apex for all of the bracket positions, and these values demonstrated, respectively, a change of up to 0.059 and 0.186 MPa between two successive points. It can be concluded that the variation in the vertical position of the bracket can have an important effect on the torque and subsequently on the stresses and pressures in the PDL.


  • Open Access

    Study skills and habits in Shiraz dental students; strengths and weaknesses

    by Ladan Zarshenas, Shahla Momeni Danaei, Elham Mazarei, Hooman Zarif Najafi, Mahsa Shakour

    Introduction: The dental students, the same as other students, during their academic courses are required to learn a wide range of scientific subjects. Obviously, choosing the inappropriate method of study leads to confuse and disenchantment of students and it causes wasting of their energy. The purpose of this study was to assess the existing strengths and weaknesses of the skills and study habits in Dental Students of Shiraz University of Medical Sciences in 2009-10. Materials and Methods: In this cross-sectional study, all of the dental students (n = 274), who studied at the time of study at all levels in the academic year of 2009-10, were selected by the census. Data were collected by using the Huston University questionnaire consisted of two parts of demographic questions and 64 specific areas of study skills in eight domains of time management, concentration/memory, study aids/note taking, test strategies, information processing, motivation, self-assessment/reading, and writing skills. Following the retranslation of the questionnaire, the validity was confirmed by using the content validity method. The reliability was obtained by using the Cronbach's Alpha of 0.92. The data were analyzed with SPSS software version 17 and using analytical statistic tests. Results: Students who have previously participated in the study skills workshops had stronger skills in comparison with the students who had not participated in these workshops. Time management skills (P = 0.04), motivation (P = 0.0001) and information processing (P = 0.03) in students with professional status were in a more favorable position and showed significant differences in terms of educational levels. The study skills mean score of the students living in student housings in comparison with the other students were significantly higher (P = 0.04). Marital status showed no significant differences in reading skills. Conclusion and Recommendations: The review of study skills in the undergraduate and post-graduate dental students indicated that the residents had higher reading skills. By recognizing the existing strengths and weaknesses and holding programs through counseling centers can develop the study skills in the students.