IHIbrahim A. Hemadeh

Ibrahim A. Hemadeh

*This is an algorithmically generated author record based on publicly available information.

Ibrahim A. Hemadeh has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Amalgamated CHIRP and OFDM for ISAC

    by Pankaj Kumar, Mohammed El-Hajjar, Ibrahim A. Hemadeh, Yasser Mestrah, Suraj Srivastava, Aditya K. Jagannatham, Lajos Hanzo

    Integrated Sensing and Communication (ISAC) requires the development of a waveform capable of efficiently supporting both communication and sensing functionalities. This paper proposes a novel waveform that combines the benefits of both the orthogonal frequency division multiplexing (OFDM) and the Chirp waveforms to improve both the communication and sensing performance within an ISAC framework. Hence, a new architecture is proposed that utilizes the conventional communication framework while leveraging the parameters sensed at the receiver (Rx) for enhancing the communication performance. We demonstrate that the affine addition of OFDM and chirp signals results in a near constant-envelope OFDM waveform, which effectively reduces the peak-to-average power ratio (PAPR), a key limitation of traditional OFDM systems. Using the OFDM framework for sensing in the conventional fashion requires the allocation of some resources for sensing, which in turn reduces communication performance. As a remedy, the proposed affine amalgam facilitates sensing through the chirp waveform without consuming communication resources, thereby preserving communication efficiency. Furthermore, a novel technique of integrating the chirp signal into the OFDM framework at the slot-level is proposed to enhance the accuracy of range estimation. The results show that the OFDM signal incorporated with chirp has better autocorrelation properties, improved root mean square error (RMSE) of range and velocity, and lower PAPR. Finally, we characterize the trade-off between communications and sensing performance.


  • Top Cited Papers

    Energy-Efficient Reconfigurable Holographic Surfaces Operating in the Presence of Realistic Hardware Impairments

    by Qingchao Li, Mohammed El-Hajjar, Yanshi Sun, Ibrahim Hemadeh, Arman Shojaeifard, Lajos Hanzo

    Reconfigurable holographic surfaces (RHSs) constitute a promising technique of supporting energy-efficient communications. In this paper, we formulate the energy efficiency maximization problem of the switch-controlled RHS-aided beamforming architecture by alternately optimizing the holographic beamformer at the RHS, the digital beamformer, the total transmit power and the power sharing ratio of each user. Specifically, to deal with this challenging non-convex optimization problem, we decouple it into three sub-problems. Firstly, the coefficients of RHS elements responsible for the holographic beamformer are optimized to maximize the sum of the eigen-channel gains of all users by our proposed low-complexity eigen-decomposition (ED) method. Then, the digital beamformer is designed by the singular value decomposition (SVD) method to support multi-user information transfer. Finally, the total transmit power and the power sharing ratio are alternately optimized, while considering the effect of transceiver hardware impairments (HWI). We theoretically derive the spectral efficiency and energy efficiency performance upper bound for the RHS-based beamforming architectures in the presence of HWIs. Our simulation results show that the switch-controlled RHS-aided beamforming architecture achieves higher energy efficiency than the conventional fully digital beamformer and the hybrid beamformer based on phase shift arrays (PSA). Moreover, considering the effect of HWI in the beamforming design can bring about further energy efficiency enhancements.


  • Coordinated Reconfigurable Intelligent Surfaces: Non-Diagonal Group-Connected Design

    by Qingchao Li, Mohammed El-Hajjar, Ibrahim Hemadeh, Arman Shojaeifard, Lajos Hanzo

    Reconfigurable intelligent surfaces (RIS) constitute a promising technology for future wireless communications in terms of improving the spectral-efficiency and energy-efficiency. In this context, a novel RIS structure, which we refer to as coordinated RIS architecture, is formulated, where different RIS elements can be connected by configurable impedances to eliminate the channel fading. In the proposed RIS architecture, both the RIS element connection pattern and the configurable impedances can be optimized, based on the channel state information (CSI). The proposed architecture exhibits higher optimization flexibility than the state-of-the-art single-connected RIS architecture and group-connected RIS architecture, where only the configurable impedances can be optimized. Specifically, when considering base stations (BS) having a single antenna, the maximal ratio combining (MRC) criterion may be harnessed for designing the RIS element connection pattern, while in the case of multiple BS antennas, the alternating optimization algorithm may be employed for iteratively optimizing the BS's active beamforming vector and the RIS's passive beamforming matrix. Our numerical results show that the proposed coordinated RIS architecture achieves higher power gain than the group-connected RIS architecture having the same number of configurable impedances. Furthermore, the power gain in our proposed RIS architecture tends to that of the fully-connected architecture upon increasing the number of RIS elements, while requiring significantly fewer configurable impedances.


  • Achievable Rate Analysis of Intelligent Omni-Surface Assisted NOMA Holographic MIMO Systems

    by Qingchao Li, Mohammed El-Hajjar, Yanshi Sun, Ibrahim Hemadeh, Yingming Tsai, Arman Shojaeifard, Lajos Hanzo

    An intelligent omni-surface (IOS) assisted holographic multiple-input and multiple-output architecture is conceived for 360â—¦ full-space coverage at a low energy consumption. The theoretical ergodic rate lower bound of our non-orthogonal multiple access (NOMA) scheme is derived based on the moment matching approximation method, while considering the signal distortion at transceivers imposed by hardware impairments (HWIs). Furthermore, the asymptotically ergodic rate lower bound is derived both for an infinite number of IOS elements and for continuous aperture surfaces. Both the theoretical analysis and the simulation results show that the achievable rate of the NOMA scheme is higher than that of its orthogonal multiple access counterpart. Furthermore, owing to the HWIs at the transceivers, the achievable rate saturates at high signal-to-noise ratio region, instead of reaching its theoretical maximum.


  • Low-Overhead Channel Estimation for RIS-Aided Multi-Cell Networks in the Presence of Phase Quantization Errors

    by Qingchao Li, Mohammed El-Hajjar, Ibrahim Hemadeh, Arman Shojaeifard, Lajos Hanzo

    Deploying reconfigurable intelligent surfaces (RIS) is promising for enhancing the transmission reliability of wireless communications by controlling the wireless environment, in which the active beamforming at the base station and the passive beamforming at the RIS are jointly designed based on the acquisition of channel state information. Hence, channel estimation is crucial for RIS-aided systems. Due to the lack of active radio frequency chains at the RIS to process and transmit pilot sequences, only the cascaded twin-hop transmitter-RISreceiver channel can be estimated, which results in extremely high pilot overhead, when a large number of RIS reflecting elements is used. As a remedy, we propose a channel estimation method relying on low pilot overhead, namely the KarhunenLoeve transformation based linear minimal mean square error ` (KL-LMMSE) estimator. This exploits the spatial correlation of the RIS-cascaded channels, for our multi-cell multiple-input and multiple-output RIS-aided systems. Furthermore, we extend our investigations to the effects of realistic phase quantization errors. Additionally, we derive the theoretical mean square error (MSE) of our proposed channel estimators verified by numerical simulations, and compare the results to various benchmark schemes. We show that the MSE performance of our proposed KL-LMMSE estimator is better than that of the state-of-the-art low-overhead channel estimators.


  • Top Cited Papers

    Achievable Rate Analysis of the STAR-RIS-Aided NOMA Uplink in the Face of Imperfect CSI and Hardware Impairments

    by Qingchao Li, Mohammed El-Hajjar, Yanshi Sun, Ibrahim Hemadeh, Arman Shojaeifard, Yuanwei Liu, Lajos Hanzo

    Reconfigurable intelligent surfaces (RIS) are capable of beneficially ameliorating the propagation environment by appropriately controlling the passive reflecting elements. To extend the coverage area, the concept of simultaneous transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) has been proposed, yielding supporting 360° coverage user equipment (UE) located on both sides of the RIS. In this paper, we theoretically formulate the ergodic sum-rate of the STAR-RIS assisted non-orthogonal multiple access (NOMA) uplink in the face of channel estimation errors and hardware impairments (HWI). Specifically, the STAR-RIS phase shift is configured based on the statistical channel state information (CSI), followed by linear minimum mean square error (LMMSE) channel estimation of the equivalent channel spanning from the UEs to the access point (AP). Afterwards, successive interference cancellation (SIC) is employed at the AP using the estimated instantaneous CSI, and we derive the theoretical ergodic sum-rate upper bound for both perfect and imperfect SIC decoding algorithm. The theoretical analysis and the simulation results show that both the channel estimation and the ergodic sum-rate have performance floor at high transmit power region caused by transceiver hardware impairments.


  • Reconfigurable Intelligent Surface Aided Amplitude- and Phase-Modulated Downlink Transmission

    by Qingchao Li, Mohammed El-Hajjar, Ibrahim Hemadeh, Arman Shojaeifard, Alain A. M. Mourad, Lajos Hanzo

    New reconfigurable intelligent surface (RIS) based amplitude and phase modulation schemes are proposed as an evolution how the phase-only modulation schemes available in the literature. Explicitly, both the amplitude-phase shift keying (A-PSK) and quadrature amplitudephase shift keying (QA-PSK) are conceived, where the RIS is assumed to be part of a transmitter to deliver information to the multi-antenna aided downlink receiver. In the proposed design, the RIS is partitioned into multiple blocks, and the information bits are conveyed by controlling both the ON-OFF state and the phase shift of the RIS elements in each block. Since the propagation paths spanning from each RIS block to the receiver can be coherently combined as a benefit of appropriately configuring the phase of the RIS elements, the received signal constellations can be designed by controlling both the ON-OFF pattern of the RIS blocks as well as the phase shift of the RIS elements. Both the theoretical analysis and the simulation results show that our proposed RIS-aided modulation schemes outperform the state-of-the-art RIS-based PSK modulation both in terms of its discrete-input-continuous-output memoryless channel (DCMC) capacity and its symbol error probability, especially in the high signal-to-noise-ratio (SNR) region, when considering realistic finite resolution RIS phase shifts.


  • Performance Analysis of Active RIS-Aided Systems in the Face of Imperfect CSI and Phase Shift Noise

    by Qingchao Li, Mohammed El-Hajjar, Ibrahim Hemadeh, Deepa Jagyasi, Arman Shojaeifard, Lajos Hanzo

    The linear minimal mean square error (LMMSE) estimator for active reconfigurable intelligent surface (RIS)-aided wireless systems is formulated. Furthermore, based on the moment-matching method, we employ the Gamma distribution to approximate the distribution of the instantaneous received signal-to-interference-plus-noise ratio (SINR), and then derive the closed-form outage probability and ergodic channel capacity in the presence of realistic channel estimation errors, the thermal noise of RIS amplifiers and the RIS phase shift noise. Our theoretical analysis and simulation results show that the introduction of RIS amplifiers is equivalent to increasing of the transmit power, and also present the performance degradation resulting from the channel estimation error and the RIS phase noise.


  • The Reconfigurable Intelligent Surface-Aided Multi-Node IoT Downlink: Beamforming Design and Performance Analysis

    by Qingchao Li, Mohammed El-Hajjar, Ibrahim Hemadeh, Deepa Jagyasi, Arman Shojaeifard, Ertugrul Basar, Lajos Hanzo

    Reconfigurable intelligent surfaces (RISs) are capable of enhancing the wireless propagation environment of the future Internet of Things (IoT). Recently, they have also been configured as a transmitter to realize information modulation at low hardware complexity. In this article, we conceive a transmitter relying on a single radio frequency (RF) chain for low-complexity RIS-aided multiuser downlink communication. More explicitly, in the proposed architecture, the multiuser information is transmit precoded and modulated at the RIS by appropriately configuring the phase shift and amplitude of each RIS element. We assume that the distribution of multiple users obeys on a Poisson point process (PPP), where we jointly optimize the total power reflected from the RIS and the power allocation fraction assigned to each user, under the practical constraint of a realistic amplitude limitation of each RIS element. Additionally, we theoretically analyze the ergodic rate, symbol error probability, outage probability, and coverage range of the proposed RIS-aided single-RF downlink and confirm the accuracy of our analysis by simulations. Finally, we compare its performance to that of the conventional multiple-input-multiple-output (MIMO) systems employing multiple RF-chains.


  • Top Cited Papers

    Reconfigurable Intelligent Surfaces Relying on Non-Diagonal Phase Shift Matrices

    by Qingchao Li, Mohammed El-Hajjar, Ibrahim Hemadeh, Arman Shojaeifard, Alain A. M. Mourad, Bruno Clerckx, Lajos Hanzo

    Reconfigurable intelligent surfaces (RIS) have been actively researched as a potential technique for future wireless communications, which intelligently ameliorate the signal propagation environment. In the conventional design, each RIS element configures and reflects its received signal independently of all other RIS elements, which results in a diagonal phase shift matrix. By contrast, we propose a novel RIS architecture, where the incident signal impinging on one element can be reflected from another element after an appropriate phase shift adjustment, which increases the flexibility in the design of RIS phase shifts, hence, potentially improving the system performance. The resultant RIS phase shift matrix also has off-diagonal elements, as opposed to the pure diagonal structure of the conventional design. Compared to the state-of-art fully-connected/group-connected RIS structures, our proposed RIS architecture has lower complexity, while attaining a higher channel gain than the group-connected RIS structure, and approaching that of the fully-connected RIS structure. We formulate and solve the problem of maximizing the achievable rate of our proposed RIS architecture by jointly optimizing the transmit beamforming and the non-diagonal phase shift matrix based on alternating optimization and semi-define relaxation (SDR) methods. Moreover, the closed-form expressions of the channel gain, the outage probability and bit error ratio (BER) are derived. Simulation results demonstrate that our proposed RIS architecture results in an improved performance in terms of the achievable rate compared to the conventional architecture, both in single-user as well as in multi-user scenarios.