Arman Shojaeifard
Research Subjects
Arman Shojaeifard has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Jie Tang
South China University of Technology
10 shared publications - Kai-Kit Wong
University College London
10 shared publications - Ibrahim A. Hemadeh
InterDigital, London, U.K.
9 shared publications - Lajos Hanzo
University of Southampton
9 shared publications - Mohammed El-Hajjar
School of Electronics and Computer Science, University of Southampton, Southampton, U.K.
9 shared publications - Qingchao Li
Beihang University
9 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 40 (5) , 13-15
Fluid Antenna System for Future Wireless Networks
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 40 (5) , 13-15
Fluid Antenna System for Future Wireless Networks
- 1 June 2026
- Published by Springer Nature
- p. 697-713
The Road Towards RIS Standardization
- Top Cited PapersOpen Access
- 29 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 39 (6) , 139-147
Toward 6G Evolution: Three Enhancements, Three Innovations, and Three Major Challenges
Over the past few decades, wireless communication has witnessed remarkable growth, experiencing several transformative changes. This article offers a comprehensive overview of wireless communication technologies, from the foundations to the recent wireless advances and future trends. Specifically, we take a neutral look at the state-of-the-art technologies for the fifth generation (5G) and ongoing evolutions towards 6G, while also reviewing the recommendations of the international mobile communication vision for 2030 (IMT-2030). We first highlight specific features of IMT 2030, including three IMT-2020 extensions and three new innovations—ubiquitous connectivity and integrating the new capabilities of sensing & artificial intelligence with communication functionality. Based on key findings, we delve into three major challenges in implementing 6G, along with global standardization efforts. Besides, a proof of concept is provided by demonstrating terahertz (THz) signal transmission using orbital angular momentum (OAM) multiplexing, which is one of the potential candidates for 6G and beyond. To inspire further potential research, we conclude by identifying research opportunities and future visions on IMT-2030 recommendations.
- 29 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Network
- Vol. 39 (6) , 139-147
Top Cited PapersOpen AccessToward 6G Evolution: Three Enhancements, Three Innovations, and Three Major Challenges
Over the past few decades, wireless communication has witnessed remarkable growth, experiencing several transformative changes. This article offers a comprehensive overview of wireless communication technologies, from the foundations to the recent wireless advances and future trends. Specifically, we take a neutral look at the state-of-the-art technologies for the fifth generation (5G) and ongoing evolutions towards 6G, while also reviewing the recommendations of the international mobile communication vision for 2030 (IMT-2030). We first highlight specific features of IMT 2030, including three IMT-2020 extensions and three new innovations—ubiquitous connectivity and integrating the new capabilities of sensing & artificial intelligence with communication functionality. Based on key findings, we delve into three major challenges in implementing 6G, along with global standardization efforts. Besides, a proof of concept is provided by demonstrating terahertz (THz) signal transmission using orbital angular momentum (OAM) multiplexing, which is one of the potential candidates for 6G and beyond. To inspire further potential research, we conclude by identifying research opportunities and future visions on IMT-2030 recommendations.
- Top Cited PapersOpen Access
- 8 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 27 (5) , 2895-2936
The Emergence of Multi-Functional and Hybrid Reconfigurable Intelligent Surfaces for Integrated Sensing and Communications - A Survey
Reconfigurable intelligent surfaces (RIS) are positioned as one of the key enabling technologies for 6G networks as they can provide ubiquitous coverage for areas with blocked line-of-sight (LOS) links. However, to be successfully integrated into functional networks such structures will require the addition of sensors and other radio network elements, thereby resulting in a multi-functional RIS (MF-RIS). These structures are expected to be deployed for integrated sensing and communications (ISAC) and radar and communication coexistence (RCC) in 6G, which will enhance the performance of radio communication and enable a smart wireless environment (SWE) that is programmable and self-reconfigurable. This survey provides an up-to-date summary of the state of the art. It considers applications for MF-RISs and the challenges associated with their deployment.
- 8 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Surveys & Tutorials
- Vol. 27 (5) , 2895-2936
Top Cited PapersOpen AccessThe Emergence of Multi-Functional and Hybrid Reconfigurable Intelligent Surfaces for Integrated Sensing and Communications - A Survey
Reconfigurable intelligent surfaces (RIS) are positioned as one of the key enabling technologies for 6G networks as they can provide ubiquitous coverage for areas with blocked line-of-sight (LOS) links. However, to be successfully integrated into functional networks such structures will require the addition of sensors and other radio network elements, thereby resulting in a multi-functional RIS (MF-RIS). These structures are expected to be deployed for integrated sensing and communications (ISAC) and radar and communication coexistence (RCC) in 6G, which will enhance the performance of radio communication and enable a smart wireless environment (SWE) that is programmable and self-reconfigurable. This survey provides an up-to-date summary of the state of the art. It considers applications for MF-RISs and the challenges associated with their deployment.
- Top Cited Papers
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 72 (8) , 5226-5238
Energy-Efficient Reconfigurable Holographic Surfaces Operating in the Presence of Realistic Hardware Impairments
Reconfigurable holographic surfaces (RHSs) constitute a promising technique of supporting energy-efficient communications. In this paper, we formulate the energy efficiency maximization problem of the switch-controlled RHS-aided beamforming architecture by alternately optimizing the holographic beamformer at the RHS, the digital beamformer, the total transmit power and the power sharing ratio of each user. Specifically, to deal with this challenging non-convex optimization problem, we decouple it into three sub-problems. Firstly, the coefficients of RHS elements responsible for the holographic beamformer are optimized to maximize the sum of the eigen-channel gains of all users by our proposed low-complexity eigen-decomposition (ED) method. Then, the digital beamformer is designed by the singular value decomposition (SVD) method to support multi-user information transfer. Finally, the total transmit power and the power sharing ratio are alternately optimized, while considering the effect of transceiver hardware impairments (HWI). We theoretically derive the spectral efficiency and energy efficiency performance upper bound for the RHS-based beamforming architectures in the presence of HWIs. Our simulation results show that the switch-controlled RHS-aided beamforming architecture achieves higher energy efficiency than the conventional fully digital beamformer and the hybrid beamformer based on phase shift arrays (PSA). Moreover, considering the effect of HWI in the beamforming design can bring about further energy efficiency enhancements.
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 72 (8) , 5226-5238
Top Cited PapersEnergy-Efficient Reconfigurable Holographic Surfaces Operating in the Presence of Realistic Hardware Impairments
Reconfigurable holographic surfaces (RHSs) constitute a promising technique of supporting energy-efficient communications. In this paper, we formulate the energy efficiency maximization problem of the switch-controlled RHS-aided beamforming architecture by alternately optimizing the holographic beamformer at the RHS, the digital beamformer, the total transmit power and the power sharing ratio of each user. Specifically, to deal with this challenging non-convex optimization problem, we decouple it into three sub-problems. Firstly, the coefficients of RHS elements responsible for the holographic beamformer are optimized to maximize the sum of the eigen-channel gains of all users by our proposed low-complexity eigen-decomposition (ED) method. Then, the digital beamformer is designed by the singular value decomposition (SVD) method to support multi-user information transfer. Finally, the total transmit power and the power sharing ratio are alternately optimized, while considering the effect of transceiver hardware impairments (HWI). We theoretically derive the spectral efficiency and energy efficiency performance upper bound for the RHS-based beamforming architectures in the presence of HWIs. Our simulation results show that the switch-controlled RHS-aided beamforming architecture achieves higher energy efficiency than the conventional fully digital beamformer and the hybrid beamformer based on phase shift arrays (PSA). Moreover, considering the effect of HWI in the beamforming design can bring about further energy efficiency enhancements.
- 13 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (7) , 10811-10816
Coordinated Reconfigurable Intelligent Surfaces: Non-Diagonal Group-Connected Design
Reconfigurable intelligent surfaces (RIS) constitute a promising technology for future wireless communications in terms of improving the spectral-efficiency and energy-efficiency. In this context, a novel RIS structure, which we refer to as coordinated RIS architecture, is formulated, where different RIS elements can be connected by configurable impedances to eliminate the channel fading. In the proposed RIS architecture, both the RIS element connection pattern and the configurable impedances can be optimized, based on the channel state information (CSI). The proposed architecture exhibits higher optimization flexibility than the state-of-the-art single-connected RIS architecture and group-connected RIS architecture, where only the configurable impedances can be optimized. Specifically, when considering base stations (BS) having a single antenna, the maximal ratio combining (MRC) criterion may be harnessed for designing the RIS element connection pattern, while in the case of multiple BS antennas, the alternating optimization algorithm may be employed for iteratively optimizing the BS's active beamforming vector and the RIS's passive beamforming matrix. Our numerical results show that the proposed coordinated RIS architecture achieves higher power gain than the group-connected RIS architecture having the same number of configurable impedances. Furthermore, the power gain in our proposed RIS architecture tends to that of the fully-connected architecture upon increasing the number of RIS elements, while requiring significantly fewer configurable impedances.
- 13 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (7) , 10811-10816
Coordinated Reconfigurable Intelligent Surfaces: Non-Diagonal Group-Connected Design
Reconfigurable intelligent surfaces (RIS) constitute a promising technology for future wireless communications in terms of improving the spectral-efficiency and energy-efficiency. In this context, a novel RIS structure, which we refer to as coordinated RIS architecture, is formulated, where different RIS elements can be connected by configurable impedances to eliminate the channel fading. In the proposed RIS architecture, both the RIS element connection pattern and the configurable impedances can be optimized, based on the channel state information (CSI). The proposed architecture exhibits higher optimization flexibility than the state-of-the-art single-connected RIS architecture and group-connected RIS architecture, where only the configurable impedances can be optimized. Specifically, when considering base stations (BS) having a single antenna, the maximal ratio combining (MRC) criterion may be harnessed for designing the RIS element connection pattern, while in the case of multiple BS antennas, the alternating optimization algorithm may be employed for iteratively optimizing the BS's active beamforming vector and the RIS's passive beamforming matrix. Our numerical results show that the proposed coordinated RIS architecture achieves higher power gain than the group-connected RIS architecture having the same number of configurable impedances. Furthermore, the power gain in our proposed RIS architecture tends to that of the fully-connected architecture upon increasing the number of RIS elements, while requiring significantly fewer configurable impedances.
- 5 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (5) , 7400-7405
Achievable Rate Analysis of Intelligent Omni-Surface Assisted NOMA Holographic MIMO Systems
An intelligent omni-surface (IOS) assisted holographic multiple-input and multiple-output architecture is conceived for 360◦ full-space coverage at a low energy consumption. The theoretical ergodic rate lower bound of our non-orthogonal multiple access (NOMA) scheme is derived based on the moment matching approximation method, while considering the signal distortion at transceivers imposed by hardware impairments (HWIs). Furthermore, the asymptotically ergodic rate lower bound is derived both for an infinite number of IOS elements and for continuous aperture surfaces. Both the theoretical analysis and the simulation results show that the achievable rate of the NOMA scheme is higher than that of its orthogonal multiple access counterpart. Furthermore, owing to the HWIs at the transceivers, the achievable rate saturates at high signal-to-noise ratio region, instead of reaching its theoretical maximum.
- 5 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (5) , 7400-7405
Achievable Rate Analysis of Intelligent Omni-Surface Assisted NOMA Holographic MIMO Systems
An intelligent omni-surface (IOS) assisted holographic multiple-input and multiple-output architecture is conceived for 360◦ full-space coverage at a low energy consumption. The theoretical ergodic rate lower bound of our non-orthogonal multiple access (NOMA) scheme is derived based on the moment matching approximation method, while considering the signal distortion at transceivers imposed by hardware impairments (HWIs). Furthermore, the asymptotically ergodic rate lower bound is derived both for an infinite number of IOS elements and for continuous aperture surfaces. Both the theoretical analysis and the simulation results show that the achievable rate of the NOMA scheme is higher than that of its orthogonal multiple access counterpart. Furthermore, owing to the HWIs at the transceivers, the achievable rate saturates at high signal-to-noise ratio region, instead of reaching its theoretical maximum.
- 6 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (5) , 6626-6641
Low-Overhead Channel Estimation for RIS-Aided Multi-Cell Networks in the Presence of Phase Quantization Errors
Deploying reconfigurable intelligent surfaces (RIS) is promising for enhancing the transmission reliability of wireless communications by controlling the wireless environment, in which the active beamforming at the base station and the passive beamforming at the RIS are jointly designed based on the acquisition of channel state information. Hence, channel estimation is crucial for RIS-aided systems. Due to the lack of active radio frequency chains at the RIS to process and transmit pilot sequences, only the cascaded twin-hop transmitter-RISreceiver channel can be estimated, which results in extremely high pilot overhead, when a large number of RIS reflecting elements is used. As a remedy, we propose a channel estimation method relying on low pilot overhead, namely the KarhunenLoeve transformation based linear minimal mean square error ` (KL-LMMSE) estimator. This exploits the spatial correlation of the RIS-cascaded channels, for our multi-cell multiple-input and multiple-output RIS-aided systems. Furthermore, we extend our investigations to the effects of realistic phase quantization errors. Additionally, we derive the theoretical mean square error (MSE) of our proposed channel estimators verified by numerical simulations, and compare the results to various benchmark schemes. We show that the MSE performance of our proposed KL-LMMSE estimator is better than that of the state-of-the-art low-overhead channel estimators.
- 6 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (5) , 6626-6641
Low-Overhead Channel Estimation for RIS-Aided Multi-Cell Networks in the Presence of Phase Quantization Errors
Deploying reconfigurable intelligent surfaces (RIS) is promising for enhancing the transmission reliability of wireless communications by controlling the wireless environment, in which the active beamforming at the base station and the passive beamforming at the RIS are jointly designed based on the acquisition of channel state information. Hence, channel estimation is crucial for RIS-aided systems. Due to the lack of active radio frequency chains at the RIS to process and transmit pilot sequences, only the cascaded twin-hop transmitter-RISreceiver channel can be estimated, which results in extremely high pilot overhead, when a large number of RIS reflecting elements is used. As a remedy, we propose a channel estimation method relying on low pilot overhead, namely the KarhunenLoeve transformation based linear minimal mean square error ` (KL-LMMSE) estimator. This exploits the spatial correlation of the RIS-cascaded channels, for our multi-cell multiple-input and multiple-output RIS-aided systems. Furthermore, we extend our investigations to the effects of realistic phase quantization errors. Additionally, we derive the theoretical mean square error (MSE) of our proposed channel estimators verified by numerical simulations, and compare the results to various benchmark schemes. We show that the MSE performance of our proposed KL-LMMSE estimator is better than that of the state-of-the-art low-overhead channel estimators.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 13 (2) , 570-574
Statistical CSI-Based Beamforming for RIS-Aided Multiuser MISO Systems via Deep Reinforcement Learning
This letter presents a novel joint beamforming algorithm for reconfigurable intelligent surfaces (RIS) in multiuser multiple-input single-output (MISO) wireless communications. At first, by utilizing statistical channel state information (CSI) instead of instantaneous CSI, we significantly reduce channel estimation overhead. Then, the optimization of beamforming weights is accomplished using the proximal policy optimization (PPO) algorithm, a well-established actor-critic-based reinforcement learning (RL) approach. The impact of system parameters on user sum rate is also analyzed through simulations. The results show the PPO algorithm outperforms the existing methods by combining beamforming techniques with statistical CSI.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 13 (2) , 570-574
Statistical CSI-Based Beamforming for RIS-Aided Multiuser MISO Systems via Deep Reinforcement Learning
This letter presents a novel joint beamforming algorithm for reconfigurable intelligent surfaces (RIS) in multiuser multiple-input single-output (MISO) wireless communications. At first, by utilizing statistical channel state information (CSI) instead of instantaneous CSI, we significantly reduce channel estimation overhead. Then, the optimization of beamforming weights is accomplished using the proximal policy optimization (PPO) algorithm, a well-established actor-critic-based reinforcement learning (RL) approach. The impact of system parameters on user sum rate is also analyzed through simulations. The results show the PPO algorithm outperforms the existing methods by combining beamforming techniques with statistical CSI.
- 12 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (4) , 3856-3869
Kalman Filter Based Channel Tracking for RIS-Assisted Multi-User Networks
In this paper, we investigate channel estimation in a reconfigurable intelligent surface (RIS) assisted multi-user network while taking the mobility of users into consideration. Based on a time-varying channel model, we utilize Kalman filter (KF) that is able to exploit temporal correlation to track cascaded channel. In order to maintain a relatively low pilot overhead, we present a multiple sub-phases based transmission protocol where the number of pilot sequences in each sub-phase is less than the number of users, i.e., pilot contamination exists. For the sake of practicality, we directly utilize discrete Fourier transform (DFT) matrix as phase shift matrix. We analyze normalized mean square error and provide some asymptotic results. A more practical scenario with hardware impairments (HWI) at the transceiver and the RIS is also considered. Since HWI is also part of the measurement matrix and is unknown to the base station, we propose a joint estimation of the channel and HWI. Under this joint estimation framework, the underlying state space model becomes nonlinear. We develop an extended KF (EKF) algorithm to tackle the nonlinearity through which the model can be linearized. Numerical results show that the proposed KF and EKF algorithms outperform benchmark schemes under various scenarios.
- 12 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 23 (4) , 3856-3869
Kalman Filter Based Channel Tracking for RIS-Assisted Multi-User Networks
In this paper, we investigate channel estimation in a reconfigurable intelligent surface (RIS) assisted multi-user network while taking the mobility of users into consideration. Based on a time-varying channel model, we utilize Kalman filter (KF) that is able to exploit temporal correlation to track cascaded channel. In order to maintain a relatively low pilot overhead, we present a multiple sub-phases based transmission protocol where the number of pilot sequences in each sub-phase is less than the number of users, i.e., pilot contamination exists. For the sake of practicality, we directly utilize discrete Fourier transform (DFT) matrix as phase shift matrix. We analyze normalized mean square error and provide some asymptotic results. A more practical scenario with hardware impairments (HWI) at the transceiver and the RIS is also considered. Since HWI is also part of the measurement matrix and is unknown to the base station, we propose a joint estimation of the channel and HWI. Under this joint estimation framework, the underlying state space model becomes nonlinear. We develop an extended KF (EKF) algorithm to tackle the nonlinearity through which the model can be linearized. Numerical results show that the proposed KF and EKF algorithms outperform benchmark schemes under various scenarios.