Sasa Zivanovic
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sasa Zivanovic has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Zoran Dimic
Lola Institute, Belgrade, Serbia
28 shared publications - Nikola Slavkovic
Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia
19 shared publications - Branko Kokotovic
University of Belgrade
12 shared publications - Nikola Vorkapic
Department for Production Engineering, Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia
11 shared publications - Slobodan Tabakovic
Faculty of Technical Sciences, University of Novi Sad, Trg D. Obradovića 6, 21000 Novi Sad, Serbia
11 shared publications - Goran Vasilic
University of Belgrade
8 shared publications
Latest Publications
- Open Access
- 5 January 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (1) , 49
Determination of Backlash Value in the Feed Motion System of Machine Tools Using Shallow Neural Networks
This paper presents research aimed at detecting and quantifying backlash in the feed motion subsystem of machine tools using positioning accuracy test results. By applying shallow neural networks, we not only estimate backlash magnitude but also analyse the impact of key parameters on its occurrence. This approach enables continuous, data-driven monitoring and prediction of backlash variation while reducing machine tool calibration time in industrial settings. The experimental study used two standard motion methods while monitoring machine and ambient temperature, atmospheric pressure, and humidity. The results show how experimental parameters affect detected backlash. A feed-forward neural network predicts current backlash at specific measurement points. The results demonstrate high accuracy in backlash estimation, significantly simplifying machine calibration during maintenance and providing a foundation for real-time error compensation.
- 5 January 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (1) , 49
Open AccessDetermination of Backlash Value in the Feed Motion System of Machine Tools Using Shallow Neural Networks
This paper presents research aimed at detecting and quantifying backlash in the feed motion subsystem of machine tools using positioning accuracy test results. By applying shallow neural networks, we not only estimate backlash magnitude but also analyse the impact of key parameters on its occurrence. This approach enables continuous, data-driven monitoring and prediction of backlash variation while reducing machine tool calibration time in industrial settings. The experimental study used two standard motion methods while monitoring machine and ambient temperature, atmospheric pressure, and humidity. The results show how experimental parameters affect detected backlash. A feed-forward neural network predicts current backlash at specific measurement points. The results demonstrate high accuracy in backlash estimation, significantly simplifying machine calibration during maintenance and providing a foundation for real-time error compensation.
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 81 (1) , 43-52
Parametric programs of group technology for the production of tool parts for plastic injection molding on a CNC milling machine
Creating G-code programs for CNC machines intended for any machining process requires certain resources such as time, but also a certain level of knowledge and training of programmers and operators of CNC machines. With the aim of optimally using the existing resources of a production facility, within this work, parametric programs intended for CNC milling machines were analyzed. The analyzed parametric programs were compiled so that they represent part of the group's technology for the production of plastic injection tool parts. The parametric programs themselves are generalized and therefore universal and can be used for the implementation of a specific operation, regardless of the values of the geometric quantities that describe the shape and size of the machine part. For each of the displayed parametric programs, appropriate explanations are given through sketches, algorithms and selected parts of the program. Verification of the analyzed programs was done in the LinuxCNC software system for programming and controlling CNC machines, which confirmed their correctness.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 81 (1) , 43-52
Open AccessParametric programs of group technology for the production of tool parts for plastic injection molding on a CNC milling machine
Creating G-code programs for CNC machines intended for any machining process requires certain resources such as time, but also a certain level of knowledge and training of programmers and operators of CNC machines. With the aim of optimally using the existing resources of a production facility, within this work, parametric programs intended for CNC milling machines were analyzed. The analyzed parametric programs were compiled so that they represent part of the group's technology for the production of plastic injection tool parts. The parametric programs themselves are generalized and therefore universal and can be used for the implementation of a specific operation, regardless of the values of the geometric quantities that describe the shape and size of the machine part. For each of the displayed parametric programs, appropriate explanations are given through sketches, algorithms and selected parts of the program. Verification of the analyzed programs was done in the LinuxCNC software system for programming and controlling CNC machines, which confirmed their correctness.
- Open Access
- 2 December 2025
- Published by MDPI AG in Preprints.org
Determination of Backlash Value in the Feed Motion System of Machine Tools Using Shallow Neural Networks
This paper presents research aimed at detecting and quantifying backlash in the feed motion subsystem of machine tools using positioning accuracy test results. By applying shallow neural networks, we not only estimate backlash magnitude but also analyse the impact of key parameters on its occurrence. This approach enables continuous, data-driven monitoring and prediction of backlash variation, while reducing machine tool calibration time in industrial settings. The experimental study followed ISO 230-2, using two standard motion methods while monitoring machine and ambient temperature, atmospheric pressure, and humidity. The results show how experimental parameters affect detected backlash. A feed-forward neural network predicts current backlash at specific measurement points. The results demonstrate high accuracy in backlash estimation, significantly simplifying machine calibration during maintenance and providing a foundation for real-time error compensation.
- 2 December 2025
- Published by MDPI AG in Preprints.org
Open AccessDetermination of Backlash Value in the Feed Motion System of Machine Tools Using Shallow Neural Networks
This paper presents research aimed at detecting and quantifying backlash in the feed motion subsystem of machine tools using positioning accuracy test results. By applying shallow neural networks, we not only estimate backlash magnitude but also analyse the impact of key parameters on its occurrence. This approach enables continuous, data-driven monitoring and prediction of backlash variation, while reducing machine tool calibration time in industrial settings. The experimental study followed ISO 230-2, using two standard motion methods while monitoring machine and ambient temperature, atmospheric pressure, and humidity. The results show how experimental parameters affect detected backlash. A feed-forward neural network predicts current backlash at specific measurement points. The results demonstrate high accuracy in backlash estimation, significantly simplifying machine calibration during maintenance and providing a foundation for real-time error compensation.
- Open Access
- 13 November 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 141 (7-8) , 4567-4587
Feedrate profile generation with axis constraints using NURBS toolpaths for a Delta-KEOPS parallel kinematics machine
- 13 November 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 141 (7-8) , 4567-4587
Open AccessFeedrate profile generation with axis constraints using NURBS toolpaths for a Delta-KEOPS parallel kinematics machine
- 1 January 2025
- Published by University Library in Kragujevac
- p. 445-451
COMPARISON OF LASER INTERFEROMETER SYSTEMS FOR MEASURING POSITIONAL ACCURACY OF MACHINE TOOLS
Laser interferometers have become indispensable tools in the high-precision calibration of machine tools, offering sub-micron resolution and enhanced measurement reliability. Since the introduction of stabilized helium–neon (He–Ne) lasers in the 1960s, manufacturers like Hewlett-Packard (HP), Renishaw, and Lasertex have developed systems with increasingly advanced capabilities. This paper presents a technical and historical comparison of three key interferometric systems: HP’s 5525A, Renishaw’s XL-80, and Lasertex’s HPI-3D. The analysis includes specifications such as laser stability, resolution, environmental compensation, and dynamic measurement capabilities. The HP 5525A, although historically significant, lacks modern portability and software integration. In contrast, Renishaw’s XL-80 offers compactness, advanced environmental compensation, and compatibility with international metrology standards. Lasertex’s HPI-3D introduces next-generation capabilities, such as real-time vibration analysis, nanometric resolution, and full 3D geometric evaluation. The comparative findings suggest a clear technological evolution toward higher precision, modularity, and software-driven diagnostics in laser interferometry.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 445-451
COMPARISON OF LASER INTERFEROMETER SYSTEMS FOR MEASURING POSITIONAL ACCURACY OF MACHINE TOOLS
Laser interferometers have become indispensable tools in the high-precision calibration of machine tools, offering sub-micron resolution and enhanced measurement reliability. Since the introduction of stabilized helium–neon (He–Ne) lasers in the 1960s, manufacturers like Hewlett-Packard (HP), Renishaw, and Lasertex have developed systems with increasingly advanced capabilities. This paper presents a technical and historical comparison of three key interferometric systems: HP’s 5525A, Renishaw’s XL-80, and Lasertex’s HPI-3D. The analysis includes specifications such as laser stability, resolution, environmental compensation, and dynamic measurement capabilities. The HP 5525A, although historically significant, lacks modern portability and software integration. In contrast, Renishaw’s XL-80 offers compactness, advanced environmental compensation, and compatibility with international metrology standards. Lasertex’s HPI-3D introduces next-generation capabilities, such as real-time vibration analysis, nanometric resolution, and full 3D geometric evaluation. The comparative findings suggest a clear technological evolution toward higher precision, modularity, and software-driven diagnostics in laser interferometry.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 293
PROGRAMMING AND VERIFICATION OF MILLING OPERATIONS FOR CNC MACHINES WITH HORIZONTAL ROTARY AXIS
The paper analyses the programming of CNC milling machines with horizontal rotary axis. These are usually machines for rapid prototyping of rotating symmetrical and/or asymmetrical parts. The paper analyses the available programming software, which can be one of the standard CAD/CAM systems or a specialized CAM system. In addition to the analysis of the programming method procedure, the verification of the program by simulating the removal of material and simulating the operation of a virtual machine according to a given program was also considered. Verification of programming methods was realized by machining several characteristic parts, on developed 3-axis desktop CNC milling machine - Multiprodesk, that has two translational and one horizontal rotary axis.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 293
PROGRAMMING AND VERIFICATION OF MILLING OPERATIONS FOR CNC MACHINES WITH HORIZONTAL ROTARY AXIS
The paper analyses the programming of CNC milling machines with horizontal rotary axis. These are usually machines for rapid prototyping of rotating symmetrical and/or asymmetrical parts. The paper analyses the available programming software, which can be one of the standard CAD/CAM systems or a specialized CAM system. In addition to the analysis of the programming method procedure, the verification of the program by simulating the removal of material and simulating the operation of a virtual machine according to a given program was also considered. Verification of programming methods was realized by machining several characteristic parts, on developed 3-axis desktop CNC milling machine - Multiprodesk, that has two translational and one horizontal rotary axis.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 300
CNC SIMULATOR BASED ON LINUXCNC CONTROL AND PROGRAMMING SYSTEM
This work presents a CNC simulator that was created based on the need to design and form a working environment within which training of operators and programmers of CNC machines will be carried out in an economically profitable way. The CNC simulator is based on a Raspberry PI 5 microcomputer and LinuxCNC open-source software system intended for control and programming of CNC machines and industrial robots. The LinuxCNC software system was configured according to the set requirements and current needs. With the control system configured in this way, two working environments were formed that are currently used in the realization of laboratory exercises of the teaching process of the higher education institution. In the framework of the paper, the created working environments are described, and in the conclusion, the observations obtained by analyzing the results achieved using the CNC simulator are presented.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 300
CNC SIMULATOR BASED ON LINUXCNC CONTROL AND PROGRAMMING SYSTEM
This work presents a CNC simulator that was created based on the need to design and form a working environment within which training of operators and programmers of CNC machines will be carried out in an economically profitable way. The CNC simulator is based on a Raspberry PI 5 microcomputer and LinuxCNC open-source software system intended for control and programming of CNC machines and industrial robots. The LinuxCNC software system was configured according to the set requirements and current needs. With the control system configured in this way, two working environments were formed that are currently used in the realization of laboratory exercises of the teaching process of the higher education institution. In the framework of the paper, the created working environments are described, and in the conclusion, the observations obtained by analyzing the results achieved using the CNC simulator are presented.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 283-287
FROM MODULAR LEGACY TO OPEN INNOVATION: EVOLUTION OF THE LOLA CNC SYSTEM ARCHITECTURE
This paper provides a comprehensive overview of the development, technical architecture, and practical applications of the LOLA 30 CNC system, a landmark achievement in domestic industrial innovation in the field of numerical control. Developed in the early 1980s by the LOLA Institute, the system is examined within its historical context, with particular attention to its architectural features and its broader impact on industrial autonomy and engineering education. Special emphasis is placed on its modular design, integration with the PA512 programmable logic controller, and representative use cases. The paper also presents a comparative analysis between the LOLA 30 CNC and the modern LOLA ROSA CNC system, which is based on open-architecture hardware and software. Key technological advancements of the new system, particularly in terms of reconfigurability and distributability, are highlighted.
- 1 January 2025
- Published by University Library in Kragujevac
- p. 283-287
FROM MODULAR LEGACY TO OPEN INNOVATION: EVOLUTION OF THE LOLA CNC SYSTEM ARCHITECTURE
This paper provides a comprehensive overview of the development, technical architecture, and practical applications of the LOLA 30 CNC system, a landmark achievement in domestic industrial innovation in the field of numerical control. Developed in the early 1980s by the LOLA Institute, the system is examined within its historical context, with particular attention to its architectural features and its broader impact on industrial autonomy and engineering education. Special emphasis is placed on its modular design, integration with the PA512 programmable logic controller, and representative use cases. The paper also presents a comparative analysis between the LOLA 30 CNC and the modern LOLA ROSA CNC system, which is based on open-architecture hardware and software. Key technological advancements of the new system, particularly in terms of reconfigurability and distributability, are highlighted.
- Open Access
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 80 (5) , 509-514
Comunity for uniquely management of production and technological resources: JUPITER system and conference
This paper presents a reminder and overview of the duration of the Community for the uniquely management of production and technological resources, which is better known as the JUPITER system. In order to scientifically and expertly verify the results of research projects and determine the future development directions of the JUPITER system, the JUPITER conference was launched as a scientific and professional gathering of members of the Community and other members of the the metalworking industry, scientific research institutions and faculties.
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 80 (5) , 509-514
Open AccessComunity for uniquely management of production and technological resources: JUPITER system and conference
This paper presents a reminder and overview of the duration of the Community for the uniquely management of production and technological resources, which is better known as the JUPITER system. In order to scientifically and expertly verify the results of research projects and determine the future development directions of the JUPITER system, the JUPITER conference was launched as a scientific and professional gathering of members of the Community and other members of the the metalworking industry, scientific research institutions and faculties.