Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Weidong Cao has a total of 96 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of the Compressive Behavior of the Uniform and Graded Octet Lattice Cylindrical Shell Materials

    by Hao Xu, Chengxuan Yu, Wenchang Luo, Weidong Cao, Xiaofei Cao, Chunwang He

    Octet lattice cylindrical shell combines the stretching-dominated load transfer of Octet lattices with the geometric characteristics of the cylindrical shell, but the effects of different density gradients under different compression directions remain unclear. Uniform and three-layer graded 316L Octet LCSs were evaluated using quasi-static compression tests and validated finite element simulations. The results demonstrate that relative density is the primary factor controlling the overall stiffness, strength, and energy-absorption capacity of Octet LCSs. Under vertical compression, rearranging the density layers at a fixed average relative density regulates the yielding sequence and collapse path, enabling more controllable multistage energy absorption but with reduced stiffness and absolute SEA compared with uniform structures. Under transverse compression, the response is governed mainly by cross-sectional flattening, strut bending and local contact, and thus, the influence of layer arrangement on global load-bearing capacity is limited. The validated numerical model agrees well with the experiments and provides insights into the layer-sequence design of lightweight lattice cylindrical shells for protective and energy-absorbing applications.

  • Wall-confinement effects on momentum transfer and energy efficiency of pulsed ventilation jets

    by Hao Yu, Chuan Wang, Zhenhua Shen, Jie Ge, Guohui Li, Weidong Cao, Wang Xi

  • Brittle dynamic fracture response and crack propagation behavior of biomimetic tree-like fractal groove structure

    by Miao Cao, Xiaofei Cao, Zhuangzhuang Wang, Chunwang He, Hao Xu, Wenchang Luo, Weidong Cao, Zhishuai Wan, Xiao Kang


  • Open Access

    Study on the Gas–Liquid Two-Flow Characteristics Inside a Three-Stage Centrifugal Pump

    by Xiang Zhang, Weidong Cao

    This paper takes a small three-stage centrifugal pump as the research object. Based on the RNG k-ε turbulence model and the TFM two-phase flow model, the numerical simulation of the internal gas–liquid two-phase flow was carried out, and the influence of the inlet gas content rate of the small multistage centrifugal pump on its internal flow was analyzed. The research results show that the head and efficiency of the multistage centrifugal pump will decrease with the increase in the inlet gas content rate. As the gas content increases from 0% to 5%, the head of the multistage centrifugal pump decreases by 3% and its efficiency drops by 5%. The trend of the continuous increase in the pressure on the blade surface does not change with the increase in the inlet gas content rate. The bubble area on the surface of the first-stage impeller blade increases with the increase in the gas content rate. When the inlet gas content rate condition reaches 5%, the bubbles cover the middle section of the blade suction surface. The flow vortex structure is mainly composed of blade separation vortices and mouth ring clearance leakage vortices. The vortices inside the impeller are concentrated in the blade outlet and rim area, while the vortices inside the guide vanes are located in the flow channel area of the anti-guide vanes. With the increase in the gas content rate, the amplitude of pressure pulsation in the flow channel inside the pump decreases.


  • Computational investigation of vortex dynamics in a high-speed multi-stage pump

    by Weidong Cao, Yejun Chai, Jiayu Mao, Zhenjiang Zhao, Mahmoud A. El-Emam, Ling Zhou

    In the depths of the ocean, where minerals lie buried beneath layers of sediment, multi-stage pumps serve as the workhorses of deep-sea mining, lifting extracted materials through immense vertical distances. To ensure their efficiency and reliability, a comprehensive hydrodynamic analysis is required, focusing on vortex-induced vibrations and fluid–structure interactions. In this study, numerical simulations were conducted using computational fluid dynamics to investigate the internal flow characteristics of a multi-stage deep-sea pump. The distribution and formation mechanisms of vortices were analyzed using the omega vorticity identification method, which allowed for the capture of vortex structures and the evaluation of entropy production in the impeller and guide vanes across varying flow rates. The results revealed that at low flow rates, complex vortex structures, including flow separation and reflux vortices, were predominant at the impeller inlet. As the flow rate increased, these vortices gradually dissipated, leading to a more stable wake at the impeller outlet, while separation and reflux vortices became more pronounced at the guide vanes' inlet and outlet. A reduction in the blade passage vortex structure was also observed with increasing flow rates. Further analysis demonstrated that the stretching and twisting term played a crucial role in the formation, evolution, and dissipation of vortex structures at the guide vanes' inlet. Meanwhile, the Coriolis force was identified as a key factor in vortex generation at the impeller inlet and within the blade passage. These findings provide valuable insights into the vortex dynamics governing deep-sea pump hydraulics, offering a foundation for optimizing their design to enhance operational performance and ensure more efficient deep-sea resource extraction.


  • Open Access

    Numerical and Experimental Investigations on the Compressive Properties of the Graded BCC Lattice Cylindrical Shells Made of 316L Stainless Steel

    by Yiting Guan, Wenjie Ma, Miao Cao, Hao Xu, Wenchang Luo, Weidong Cao, Siying Wang, Ying Qin, Xiaoyu Zhang, Xiaofei Cao

    Uniform and graded BCC lattice cylindrical shells were proposed, and the corresponding structural specimens were fabricated with 316L stainless steel material. Experimental testing and numerical simulations were both utilized to investigate the quasi-static and dynamic compression behavior of the uniform and graded BCC lattice cylindrical shells. Finite element results were compared with the experimental results. Parametric studies were conducted to study the effects of relative density, gradient distribution, and loading velocity on the mechanical properties and deformation features. When the relative density increased from 9% to 25%, a 175% increase in SEA could be seen. Graded BCC lattice cylindrical shells almost exhibited the same mechanical performance. When compared with the SEA value under low-speed loading conditions, a 26.95% maximum increase could be witnessed in the graded-5 specimen under high-speed loading. Testing results indicated that the proposed uniform and graded BCC lattice cylindrical shells exhibited fascinating quasi-static and dynamic mechanical behavior, which provided guidance for the design and application of next-generation lightweight materials with excellent protective properties.


  • Open Access

    Dynamic Compression Mechanical Behavior of Three-Dimensional Chiral Mechanical Metamaterials: Effects of Geometric Parameters and Size

    by Shidi Qin, Zhenyang Huang, Weidong Cao, Xiaofei Cao, Yongshui Lin

    The coupled compression–torsion effects of three-dimensional chiral mechanical metamaterials have attracted widespread attention from researchers in recent years. However, the deformation rules and mechanisms through which geometric parameters and size affect their quasi-static and low-speed dynamic compression behavior are still unclear. This paper numerically investigates the quasi-static and low-speed dynamic compression mechanical behavior of three-dimensional chiral mechanical metamaterials, and the effects of geometric parameters and size are discussed. The numerical results are validated by their comparison with the experimental data. The testing results indicate that the geometric parameters as well as number of arrays in different directions have a significant effect on the quasi-static and dynamic compression twist angle per axial strain and the effective modulus. Interestingly, the values of the twist angle per axial strain under static and dynamic compression are almost the same under the same strain, but the effective modulus decreases more sharply under dynamic loading conditions, which may be due to inertia. Our work elucidates the mechanism through which geometric parameters and size affect the quasi-static and dynamic deformation behavior of three-dimensional chiral mechanical metamaterials, which provides design references for their practical engineering applications.


  • Open Access

    Dynamic Compressive Behavior of a Novel Bioinspired Gradient Negative Poisson’s Ratio Sign-Switching Metamaterial Made of Thermoplastic Polyurethane

    by Yiting Guan, Xing Luo, Weidong Cao, Xiao Du, Mingkun Du, Zhiwei Zhou, Xiaofei Cao

    Inspired by Scylla serrata, a novel thermoplastic polyurethane (TPU) negative Poisson’s ratio sign-switching metamaterial is proposed, and the corresponding original and gradient structures (i.e., OPSM and GPSM) are created. Numerical simulation is utilized to simulate the quasi-static and dynamic compression behavior of the proposed structures considering the rate-dependent properties, elastoplastic response, and nonlinear contact. The neo-Hookean hyperelastic constitutive model and the Prony series are adopted to model the target structures. Finite element results are validated through experimental results. Parametric studies are conducted to study the effects of gradient characteristics and loading velocities on the mechanical behavior and Poisson’s ratio of the structures. Testing results indicate that the proposed novel bioinspired structure patterns exhibit fascinating mechanical behavior and interesting negative Poisson’s ratio sign-switching characteristics, which would provide the design guidance for the development and application of bioinspired structural materials.


  • Open Access

    Study on Wear Characteristics of a Guide Vane Centrifugal Pump Based on CFD–DEM

    by Weidong Cao, He Wang, Jian Tang

    Guide vane submersible centrifugal pumps are a kind of submersible pump, and the fluid inside the pump is often mixed with gravel and other impurities during operation, affecting the pump’s operating efficiency and life expectancy. However, past studies on solid–liquid two-phase flow (STF) and wear characteristics in guided vane centrifugal pumps have been limited to the particle trajectory and wear region distribution. These studies have lacked research on the effect of particles on the fluid flow and the specific amount of wear on the overflow components. Additionally, most of them have used the DPM discrete-phase model, which does not consider the particle–particle and particle–wall interactions. This paper is based on the CFD–DEM method, combined with the Archard wear model. A solid–liquid two-phase flow simulation is carried out for pumps with different particle sizes and particle shapes to analyze the particle movement inside the pump, the wear distribution and average wear amount of the overflow components, and the effect of particles on the turbulent kinetic energy of the fluid. The results show that the particles mainly collide with the leading and trailing edges of the impeller blades and the leading edge of the guide vane blades and form a buildup at the trailing edge of the concave surface of the guide vane blades, resulting in the wear being mainly distributed in these regions. With an increase in particle size and a decrease in sphericity, the average wear on the overflow components increases. The change of particle size directly affects the resistance of the fluid and the structure of the flow field, which has a large impact on the fluid flow pattern and generates large turbulent kinetic energy fluctuations. The shape of the particles only changes the structure of the local flow field, which has a small impact on the fluid flow pattern.


  • Open Access

    Pressure Pulsation Characteristics on the Bulb Body of a Submersible Tubular Pump

    by Jian Wang, Ze Chen, Linghao Li, Chuan Wang, Kangle Teng, Qiang He, Jiren Zhou, Shanshan Li, Weidong Cao, Xiuli Wang, et al.

    Submersible tubular pumps are an ideal choice for pump stations that require high flow rates and low lift. These pumps combine the unique features of submersible motors with axial flow pump technology, making them highly efficient and cost-effective. They have found extensive applications in China’s rapidly developing water conservancy industry. In this research, we focus on investigating the pressure pulsation characteristics of the internal bulb body in a specific pump station project in China. To conduct our analysis, we utilize a model of the submersible tubular pump and strategically position 18 monitoring points. These monitoring points cover various sections, including the impeller inlet and outlet, guide vane outlet, as well as the inlet, middle, and outlet sections of the bulb body segment. To calculate the unsteady flow of the system, we employ numerical simulation techniques. By combining the outcomes of model tests, we determine the pressure pulsation characteristics. The comparison of results reveals a remarkable similarity between the efficiency–head curves obtained from the numerical simulation and the model test. While the model test yields slightly higher head results, the numerical simulation indicates slightly higher efficiency values. This finding lends strong support to the reliability of numerical simulation results, which can provide valuable insights for the design and optimization of submersible tubular pumps. Overall, submersible tubular pumps demonstrate their suitability for pump stations with high flow rates and low lift requirements. The study of pressure pulsation characteristics within the bulb body contributes to a better understanding of their performance and facilitates their further application in the field of water conservancy engineering.