Viktor Bogomolov
Viktor Bogomolov has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Dmytro Leontiev
Kharkiv National Automobile and Highway University
5 shared publications - Igor Gritsuk
Faculty of Special Technology, Alexander Dubcek University of Trencin, Ku kyselke 469, 911 06 Trenčín, Slovakia
3 shared publications Alexandr Yarita
Kharkov National Auto & Highway University
2 shared publicationsAnatoliy Turenko
Kharkov National Auto and Highway University
2 shared publications- Andrii Frolov
Харківський національний автомобільно-дорожній університет, 61002, Україна, м. Харків, вул. Ярослава Мудрого, 25
2 shared publications Dmytro Klets
Kharkov National Auto and Highway University
2 shared publications
Latest Publications
- Open Access
- 31 December 2024
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 55,p. 5-11
Application of the partial accelerations method in large-scale modeling of mechanical systems
Problem. Modern trends in the design of mechanical systems require the application of efficient methods to reduce time and resource expenditures during the development and testing of new structures. Large-scale modeling serves as a critical tool for verifying theoretical principles, evaluating the safety, and assessing the functionality of mechanical systems at early design stages. However, the complexity of dynamic models that describe the behavior of mobile machines in a scaled format necessitates the development of approaches to simplify such models. One promising approach is the method of partial accelerations, which enables mathematical and computational optimization of modeling processes. Purpose. The purpose of this study is to improve large-scale modeling methods by employing the method of partial accelerations in the study of mobile machine dynamics. Methodology. The research is based on the principle of superposition in mechanics, which enables the replacement of classical dynamic equations with equations of partial accelerations in a homogeneous vector space. This approach significantly simplifies the mathematical representation of system dynamics. Results. It has been established that the acceleration scale for mechanical systems operating within Earth’s gravitational field is always equal to unity, simplifying the process of determining the scaling factors for other physical quantities. The study proposes equations for partial accelerations that provide an accurate representation of the kinematics of both prototype and scaled models of mobile machines. Furthermore, the application of the multi-component complex motion model demonstrated its ability to evaluate dynamic deviations in mobile machines and account for the effects of active and reactive forces. Originality. The proposed method of partial accelerations introduces a novel approach to large-scale modeling of mechanical systems. By operating within a homogeneous vector space of accelerations, this method eliminates the need for inertial forces, reducing the complexity of mathematical models and enhancing the accuracy of predicting system dynamic behavior. Practical meaning. The method of partial accelerations can be applied in the following areas: designing mobile machines, including vehicles and planetary rovers; optimizing dynamic tests using accelerometers; modeling the energy efficiency of vehicles under steady and unsteady motion; enhancing scaled models for safety and maneuverability analyses
- 31 December 2024
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 55,p. 5-11
Open AccessApplication of the partial accelerations method in large-scale modeling of mechanical systems
Problem. Modern trends in the design of mechanical systems require the application of efficient methods to reduce time and resource expenditures during the development and testing of new structures. Large-scale modeling serves as a critical tool for verifying theoretical principles, evaluating the safety, and assessing the functionality of mechanical systems at early design stages. However, the complexity of dynamic models that describe the behavior of mobile machines in a scaled format necessitates the development of approaches to simplify such models. One promising approach is the method of partial accelerations, which enables mathematical and computational optimization of modeling processes. Purpose. The purpose of this study is to improve large-scale modeling methods by employing the method of partial accelerations in the study of mobile machine dynamics. Methodology. The research is based on the principle of superposition in mechanics, which enables the replacement of classical dynamic equations with equations of partial accelerations in a homogeneous vector space. This approach significantly simplifies the mathematical representation of system dynamics. Results. It has been established that the acceleration scale for mechanical systems operating within Earth’s gravitational field is always equal to unity, simplifying the process of determining the scaling factors for other physical quantities. The study proposes equations for partial accelerations that provide an accurate representation of the kinematics of both prototype and scaled models of mobile machines. Furthermore, the application of the multi-component complex motion model demonstrated its ability to evaluate dynamic deviations in mobile machines and account for the effects of active and reactive forces. Originality. The proposed method of partial accelerations introduces a novel approach to large-scale modeling of mechanical systems. By operating within a homogeneous vector space of accelerations, this method eliminates the need for inertial forces, reducing the complexity of mathematical models and enhancing the accuracy of predicting system dynamic behavior. Practical meaning. The method of partial accelerations can be applied in the following areas: designing mobile machines, including vehicles and planetary rovers; optimizing dynamic tests using accelerometers; modeling the energy efficiency of vehicles under steady and unsteady motion; enhancing scaled models for safety and maneuverability analyses
- Open Access
- 24 December 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 49,p. 23-35
Features of braking of multi-axle vehicles depending on the layout of their axles
Анотація Проблема. На даний час в науково-методичних рекомендаціях судово-експертних установ та в науково-технічній літературі відсутні універсальні методики щодо визначення параметрів гальмування вантажних багатовісних транспортних засобів, що не дає можливості використовувати типові підходи при складанні висновків авто-технічної експертизи. Мета. Мета полягає в тому, щоб показати можливість використаннея в практиці проведення автотехнічних експертиз, методики визначення уповільення багатовісного транспортного засобу на основі реалізованих зчеплень шин його коліс та координат положення його центру тяжіння.. Методологія. Прийняті в роботі підходи до вирішення поставленої мети базуються на теоретичних основах гальмування багатовісних транспортних засобів, наукових положень пружних деформацій пневматичних шин автомобільних коліс, геометричних та вагових параметрах колісного транспортного засобу. Результати. Визначено рівняння, які дозволяють розрахувати значення коефіцієнта гальмування багатовісних транспортних засобів на основі координат положення його центру тяжіння, реалізованих зчеплень між шинами автомобільних коліс та поверхнею дорожнього покриття, а також розподілення навантаження між відповідними передніми і задніми вісями багатовісного транспортного засобу. Визначено рівняння, які дозволяють розрахувати положення координати центру тяжіння багатовісного колісного транспортного засобу щодо його передніх і задніх осей. Оригінальність. Результати проведеної роботи дають загальне уявлення про вплив геометричних та вагових параметрів багатовісного транспортного засобу на ефективність його гальмування, в тому числі й при виході з ладу елементів його гальмового керування. Практичне значення. Отримані результати можуть бути рекомендовані експертам-автотехнікам при визначені технічної можливості уникнення дорожньо-транспортної події в умовах виникнення несправностей в гальмовому керуванні транспортного засобу.
- 24 December 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 49,p. 23-35
Open AccessFeatures of braking of multi-axle vehicles depending on the layout of their axles
Анотація Проблема. На даний час в науково-методичних рекомендаціях судово-експертних установ та в науково-технічній літературі відсутні універсальні методики щодо визначення параметрів гальмування вантажних багатовісних транспортних засобів, що не дає можливості використовувати типові підходи при складанні висновків авто-технічної експертизи. Мета. Мета полягає в тому, щоб показати можливість використаннея в практиці проведення автотехнічних експертиз, методики визначення уповільення багатовісного транспортного засобу на основі реалізованих зчеплень шин його коліс та координат положення його центру тяжіння.. Методологія. Прийняті в роботі підходи до вирішення поставленої мети базуються на теоретичних основах гальмування багатовісних транспортних засобів, наукових положень пружних деформацій пневматичних шин автомобільних коліс, геометричних та вагових параметрах колісного транспортного засобу. Результати. Визначено рівняння, які дозволяють розрахувати значення коефіцієнта гальмування багатовісних транспортних засобів на основі координат положення його центру тяжіння, реалізованих зчеплень між шинами автомобільних коліс та поверхнею дорожнього покриття, а також розподілення навантаження між відповідними передніми і задніми вісями багатовісного транспортного засобу. Визначено рівняння, які дозволяють розрахувати положення координати центру тяжіння багатовісного колісного транспортного засобу щодо його передніх і задніх осей. Оригінальність. Результати проведеної роботи дають загальне уявлення про вплив геометричних та вагових параметрів багатовісного транспортного засобу на ефективність його гальмування, в тому числі й при виході з ладу елементів його гальмового керування. Практичне значення. Отримані результати можуть бути рекомендовані експертам-автотехнікам при визначені технічної можливості уникнення дорожньо-транспортної події в умовах виникнення несправностей в гальмовому керуванні транспортного засобу.
- Open Access
- 29 May 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 48,p. 27-37
FEATURES OF ADAPTIVE BRAKE CONTROL OF THE SECONDARY BRAKE SYSTEM OF A MULTI-AXLE VEHICLE
Problem. A malfunction of the service braking system of a wheeled vehicle (CTS) significantly affects road safety, especially when operating multi-axle vehicles with large masses. One of the ways to increase the level of road safety of multi-axle vehicles, when braking them using a spare (emergency) braking system, is the introduction of automated adaptive braking systems into the design of the brake drive of vehicles. The definition of the limits of the use of the adaptive braking system on vehicles with many axles is almost not disclosed in the scientific and technical literature, therefore, the issue of using such a system on vehicles with a large number of axles requires additional research. Purpose. The purpose of this work is to develop a simulation model for adaptive control of the braking process of a multi-axle vehicle using a spare (emergency) braking system, taking into account the simulation of the dynamics of the drive and the variability of the adhesion properties between the tire of the vehicle wheel and the road surface. Methodology. To achieve this goal, it is necessary to develop a simulation model of the brake drive in an adaptive mode, implement a model of the interaction of the tire with the road surface, and implement a model of the braking dynamics of a multi-axle vehicle in the event of a malfunction of its service brake system. Originality. The proposed key criterion (Kr) for changing the throttle section in electro-pneumatic pressure modulators, which provide adaptive air inlet or outlet from the corresponding brake chambers of the drive, during simulation, made it possible to simulate the operation of the drive circuits in the adaptive mode. It has been established that, depending on the potential for the realization of the adhesion between the tires of automobile wheels and the road surface, the pressure in the electro-pneumatic brake drive with its adaptive regulation can be increased by no more than 0.04 MPa.
- 29 May 2021
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 48,p. 27-37
Open AccessFEATURES OF ADAPTIVE BRAKE CONTROL OF THE SECONDARY BRAKE SYSTEM OF A MULTI-AXLE VEHICLE
Problem. A malfunction of the service braking system of a wheeled vehicle (CTS) significantly affects road safety, especially when operating multi-axle vehicles with large masses. One of the ways to increase the level of road safety of multi-axle vehicles, when braking them using a spare (emergency) braking system, is the introduction of automated adaptive braking systems into the design of the brake drive of vehicles. The definition of the limits of the use of the adaptive braking system on vehicles with many axles is almost not disclosed in the scientific and technical literature, therefore, the issue of using such a system on vehicles with a large number of axles requires additional research. Purpose. The purpose of this work is to develop a simulation model for adaptive control of the braking process of a multi-axle vehicle using a spare (emergency) braking system, taking into account the simulation of the dynamics of the drive and the variability of the adhesion properties between the tire of the vehicle wheel and the road surface. Methodology. To achieve this goal, it is necessary to develop a simulation model of the brake drive in an adaptive mode, implement a model of the interaction of the tire with the road surface, and implement a model of the braking dynamics of a multi-axle vehicle in the event of a malfunction of its service brake system. Originality. The proposed key criterion (Kr) for changing the throttle section in electro-pneumatic pressure modulators, which provide adaptive air inlet or outlet from the corresponding brake chambers of the drive, during simulation, made it possible to simulate the operation of the drive circuits in the adaptive mode. It has been established that, depending on the potential for the realization of the adhesion between the tires of automobile wheels and the road surface, the pressure in the electro-pneumatic brake drive with its adaptive regulation can be increased by no more than 0.04 MPa.
- 15 September 2019
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
The Improvement Brake’s Qualities of Vehicle by Developing the Method of the Choosing Frictional Pairs of the Brakes Mechanisms
One of the reasons for the large number of road accidents on highways in Ukraine [1] is the instability of the braking properties due to the unstable characteristics of the brake mechanisms’ friction pairs. The manufacturer produces new automobiles with installed brake pairs (brake pads and their counter bodies), which have passed long-term tests for the stability of the friction coefficient and braking forces distribution of between the axles. This ensures the compatibility of the friction pairs characteristics for front and rear brake mechanisms according to the criteria of heat resistance. During operation, instead of worn-out brake pads, brake discs and drums, drivers can purchase new ones, manufactured as spare parts. However, in the well-known literature there are no methods that allow to check the compatibility of the friction pairs characteristics for front and rear brake mechanisms according to the criteria of heat resistance. In the article a method for choosing a set of friction pairs of brake mechanisms for passenger car during operation is proposed. Assessment of the compatibility of the friction pairs characteristics for front and rear brake mechanisms was carried out according to the criteria of heat resistance.
- 15 September 2019
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
The Improvement Brake’s Qualities of Vehicle by Developing the Method of the Choosing Frictional Pairs of the Brakes Mechanisms
One of the reasons for the large number of road accidents on highways in Ukraine [1] is the instability of the braking properties due to the unstable characteristics of the brake mechanisms’ friction pairs. The manufacturer produces new automobiles with installed brake pairs (brake pads and their counter bodies), which have passed long-term tests for the stability of the friction coefficient and braking forces distribution of between the axles. This ensures the compatibility of the friction pairs characteristics for front and rear brake mechanisms according to the criteria of heat resistance. During operation, instead of worn-out brake pads, brake discs and drums, drivers can purchase new ones, manufactured as spare parts. However, in the well-known literature there are no methods that allow to check the compatibility of the friction pairs characteristics for front and rear brake mechanisms according to the criteria of heat resistance. In the article a method for choosing a set of friction pairs of brake mechanisms for passenger car during operation is proposed. Assessment of the compatibility of the friction pairs characteristics for front and rear brake mechanisms was carried out according to the criteria of heat resistance.
- 15 January 2019
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Selection of Rational Parameters of Automated System of Robotic Transmission Clutch Control on the Basis of Simulation Modelling
The article deals with the analysis of one of the methods of selecting rational parameters of automated clutch control system for robotic transmission. The objective is to select rational parameters of automated clutch control system for robotic transmission, equipped with electropneumatic actuating mechanism on the basis of mathematical simulation. The depicted mathematical simulation of the clutch control system is characterized by the possibility to coordinate the algorithm of control unit with the dynamic processes in the execution device. The new functional interrelations between the elements of the electro-pneumatic actuator are mathematically described. The way to the selection of rational parameters of an automated control system for clutch is recommended; the selection taking into account the features of the electro-pneumatic actuator. Using the mathematical modeling method, rational control parameters of the automated clutch control system are determined. Based on comparative experimental researches, an inaccuracy is calculated for the mathematical modeling of the processes taking place in the electro-pneumatic actuator of a robotic transmission. Analysis of the results of mathematical modeling allowed finding factors that give a competitive advantage in comparison with automated clutch control systems that are used for commercial purposes.
- 15 January 2019
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Selection of Rational Parameters of Automated System of Robotic Transmission Clutch Control on the Basis of Simulation Modelling
The article deals with the analysis of one of the methods of selecting rational parameters of automated clutch control system for robotic transmission. The objective is to select rational parameters of automated clutch control system for robotic transmission, equipped with electropneumatic actuating mechanism on the basis of mathematical simulation. The depicted mathematical simulation of the clutch control system is characterized by the possibility to coordinate the algorithm of control unit with the dynamic processes in the execution device. The new functional interrelations between the elements of the electro-pneumatic actuator are mathematically described. The way to the selection of rational parameters of an automated control system for clutch is recommended; the selection taking into account the features of the electro-pneumatic actuator. Using the mathematical modeling method, rational control parameters of the automated clutch control system are determined. Based on comparative experimental researches, an inaccuracy is calculated for the mathematical modeling of the processes taking place in the electro-pneumatic actuator of a robotic transmission. Analysis of the results of mathematical modeling allowed finding factors that give a competitive advantage in comparison with automated clutch control systems that are used for commercial purposes.
- 5 October 2018
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Increase of Stability for Motor Cars in Service Braking
New solutions for actual problems of determination the efficient distribution of braking forces between the axles of the vehicle, and the stability and drivability of two-axles vehicles at service braking are received in the thesis. It permitted for the first time to determine the Law of distribution of the braking forces between the axles, that ensuring straight-running stability of two-axle vehicle at service braking, to obtain the ideal characteristics for the braking system of two-axle vehicle at service braking and to determine possible values for the distribution of braking force on the front axle. The drivability criterion at service braking obtained further development; it is offered to use boundary at gripping front or rear wheels angular vehicle acceleration on the road. The application of the stability coefficient as one of the criteria for service braking efficiency allowed to determine the ideal, as for preserving the road-holding ability, Law of distribution of the braking forces between the axles. Despite the idea, if the vehicle deceleration is increased at service braking, the ideal coefficient of braking force distribution on the front axle should be decreased, but not be increased. At small decelerations, the given coefficient can be equal to one (rear wheels are not braked), and at the maximum decelerations - we should take into account the values that correspond to retain the front and rear wheels on the blocking limit. The area of rational values of the coefficient of braking force distribution on the front axle, limited by the curves of the ideal distribution of braking forces at service braking and limit values of the adhesion coefficient, and by straight line of the ideal distribution of braking forces at emergency braking are determined. The limit values of the vehicle deceleration at service braking are determined. If the limit values are lower than the given ones, it is necessary to carry out braking only with the front wheels brakes. The obtained ideal characteristics of the two-axles braking system allow to estimate braking dynamics at emergency and service braking on roads with different coefficient of adhesion. With constant distribution of braking forces between the axles the deceleration area boundaries in which the vehicle can retain the road-holding ability at service braking are defined. To assess the impact of disturbances on the road-holding ability of the vehicle at service braking, a new criterion, the coefficient of disturbing action is offered. If the criterion value does not exceed the stability coefficient, the vehicle is stable, otherwise it loses its stability.
- 5 October 2018
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Increase of Stability for Motor Cars in Service Braking
New solutions for actual problems of determination the efficient distribution of braking forces between the axles of the vehicle, and the stability and drivability of two-axles vehicles at service braking are received in the thesis. It permitted for the first time to determine the Law of distribution of the braking forces between the axles, that ensuring straight-running stability of two-axle vehicle at service braking, to obtain the ideal characteristics for the braking system of two-axle vehicle at service braking and to determine possible values for the distribution of braking force on the front axle. The drivability criterion at service braking obtained further development; it is offered to use boundary at gripping front or rear wheels angular vehicle acceleration on the road. The application of the stability coefficient as one of the criteria for service braking efficiency allowed to determine the ideal, as for preserving the road-holding ability, Law of distribution of the braking forces between the axles. Despite the idea, if the vehicle deceleration is increased at service braking, the ideal coefficient of braking force distribution on the front axle should be decreased, but not be increased. At small decelerations, the given coefficient can be equal to one (rear wheels are not braked), and at the maximum decelerations - we should take into account the values that correspond to retain the front and rear wheels on the blocking limit. The area of rational values of the coefficient of braking force distribution on the front axle, limited by the curves of the ideal distribution of braking forces at service braking and limit values of the adhesion coefficient, and by straight line of the ideal distribution of braking forces at emergency braking are determined. The limit values of the vehicle deceleration at service braking are determined. If the limit values are lower than the given ones, it is necessary to carry out braking only with the front wheels brakes. The obtained ideal characteristics of the two-axles braking system allow to estimate braking dynamics at emergency and service braking on roads with different coefficient of adhesion. With constant distribution of braking forces between the axles the deceleration area boundaries in which the vehicle can retain the road-holding ability at service braking are defined. To assess the impact of disturbances on the road-holding ability of the vehicle at service braking, a new criterion, the coefficient of disturbing action is offered. If the criterion value does not exceed the stability coefficient, the vehicle is stable, otherwise it loses its stability.
- 3 April 2018
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Assessment of Operation Speed and Precision of Electropneumatic Actuator of Mechanical Transmission Clutch Control System
This article describes experimental research results of the electropneumatic clutch control device for the mechanical transmission. The aim is to assess electropneumatic clutch control device characteristics to regulate both mechanical and robotic transmission. The feature of the clutch control system having the electropneumatic actuator on the basis of a power cylinder is the use of a control module that consists of an acceleration valve and two electropneumatic valves. A new structural relationship between the electropneumatic clutch control device elements on the basis of the new acceleration valve design is suggested. The assessment of mass and dimension parameters of well-known devices and this electropneumatic clutch control device is provided. A new approach to choose automated clutch control system parameters taking into account the relay electropneumatic control system operation features is suggested. The experimental data that enable us to determine the clutch control actuator rational parameters are given. Using mathematical modelling methods, the automated clutch control system rational parameters are determined. The comparative experimental research results allow us to determine the factors that give competitive advantages in comparison with clutch control electromechanical devices existing diagrams. Analysis of the comparative research of clutch control systems indicates that the system operation speed and precision with the suggested electropneumatic actuator are at the level of production systems. At the same time, the use of the control module, which consists of an acceleration valve and two electropneumatic valves, considerably simplifies the proposed design and reduces its cost.
- 3 April 2018
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Assessment of Operation Speed and Precision of Electropneumatic Actuator of Mechanical Transmission Clutch Control System
This article describes experimental research results of the electropneumatic clutch control device for the mechanical transmission. The aim is to assess electropneumatic clutch control device characteristics to regulate both mechanical and robotic transmission. The feature of the clutch control system having the electropneumatic actuator on the basis of a power cylinder is the use of a control module that consists of an acceleration valve and two electropneumatic valves. A new structural relationship between the electropneumatic clutch control device elements on the basis of the new acceleration valve design is suggested. The assessment of mass and dimension parameters of well-known devices and this electropneumatic clutch control device is provided. A new approach to choose automated clutch control system parameters taking into account the relay electropneumatic control system operation features is suggested. The experimental data that enable us to determine the clutch control actuator rational parameters are given. Using mathematical modelling methods, the automated clutch control system rational parameters are determined. The comparative experimental research results allow us to determine the factors that give competitive advantages in comparison with clutch control electromechanical devices existing diagrams. Analysis of the comparative research of clutch control systems indicates that the system operation speed and precision with the suggested electropneumatic actuator are at the level of production systems. At the same time, the use of the control module, which consists of an acceleration valve and two electropneumatic valves, considerably simplifies the proposed design and reduces its cost.
- 27 February 2018
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Наука і техніка Повітряних Сил Збройних Сил України
- No. 1(30),p. 130-137
Підвищення точності роботи електропневматичного механізму керування зчепленням транспортних засобів категорій N3 та M3 шляхом використання послідовного розташування електропневматичних клапанів
- 27 February 2018
- Published by Ivan Kozhedub Kharkiv National Air Force University KNAFU in Наука і техніка Повітряних Сил Збройних Сил України
- No. 1(30),p. 130-137
Підвищення точності роботи електропневматичного механізму керування зчепленням транспортних засобів категорій N3 та M3 шляхом використання послідовного розташування електропневматичних клапанів
- Open Access
- 9 February 2018
- Published by Belarusian National Technical University in Science & Technique
- Vol. 17 (1) , 64-71-71
FEATURES OF CONTROLLING ELECTROPNEUMATIC VALVES OF ACTUATOR TO CONTROL ITS CLUTCH WITH ACCELERATION VALVE
В статье рассмотрен один из способов управления исполнительным механизмом автоматизированной системы управления сцеплением. На основе экспериментальных исследований предложены способ управления электропневматическим исполнительным устройством управления сцеплением с ускорительным клапаном, а также рациональные параметры автоматизированной системы управления сцеплением для роботизированной трансмиссии. Особенностью рассматриваемой системы является наличие в конструкции электропневматического исполнительного механизма управления сцеплением ускорительного клапана. Наличие новых связей требует корректировки способа управления исполнительным механизмом. Обосновано объединение широтно-импульсной модуляции с одиночными импульсами питания для управления электропневматическими клапанами. Определены количественные характеристики управляющих импульсов как для случая одиночных, так и в случае использования широтно-импульсной модуляции. Определена ошибка точности работы во время разных способов управления электропневматическим исполнительным устройством управления сцеплением роботизированной трансмиссии. Выделена отдельная зона широтно-импульсной модуляции, предназначенная для подавления начального гистерезиса при перемещении штока исполнительного устройства управления сцеплением. Предложен алгоритм работы системы управления сцеплением с учетом использования двух режимов работы электромагнитных клапанов. Представлена графическая интерпретация алгоритма управления сцеплением, дающая представление о расположении зон подачи постоянного сигнала на электромагнитный клапан, а также зон работы электромагнитного клапана в режиме широтно-импульсной модуляции. В алгоритме управления усилителем предусмотрен режим гарантированного сброса давления из пневматического цилиндра после отпускания педали сцепления при условии использования двух нормально закрытых электромагнитных клапанов. Такая конфигурация электропневматической системы управления сцеплением позволяет задействовать систему аварийного выключения сцепления при отсутствии электропитания. Приведены опорный алгоритм фильтрации массива данных, поступающих от датчика обратной связи, а также численные значения запаздывания, вызванного наличием фильтра.
- 9 February 2018
- Published by Belarusian National Technical University in Science & Technique
- Vol. 17 (1) , 64-71-71
Open AccessFEATURES OF CONTROLLING ELECTROPNEUMATIC VALVES OF ACTUATOR TO CONTROL ITS CLUTCH WITH ACCELERATION VALVE
В статье рассмотрен один из способов управления исполнительным механизмом автоматизированной системы управления сцеплением. На основе экспериментальных исследований предложены способ управления электропневматическим исполнительным устройством управления сцеплением с ускорительным клапаном, а также рациональные параметры автоматизированной системы управления сцеплением для роботизированной трансмиссии. Особенностью рассматриваемой системы является наличие в конструкции электропневматического исполнительного механизма управления сцеплением ускорительного клапана. Наличие новых связей требует корректировки способа управления исполнительным механизмом. Обосновано объединение широтно-импульсной модуляции с одиночными импульсами питания для управления электропневматическими клапанами. Определены количественные характеристики управляющих импульсов как для случая одиночных, так и в случае использования широтно-импульсной модуляции. Определена ошибка точности работы во время разных способов управления электропневматическим исполнительным устройством управления сцеплением роботизированной трансмиссии. Выделена отдельная зона широтно-импульсной модуляции, предназначенная для подавления начального гистерезиса при перемещении штока исполнительного устройства управления сцеплением. Предложен алгоритм работы системы управления сцеплением с учетом использования двух режимов работы электромагнитных клапанов. Представлена графическая интерпретация алгоритма управления сцеплением, дающая представление о расположении зон подачи постоянного сигнала на электромагнитный клапан, а также зон работы электромагнитного клапана в режиме широтно-импульсной модуляции. В алгоритме управления усилителем предусмотрен режим гарантированного сброса давления из пневматического цилиндра после отпускания педали сцепления при условии использования двух нормально закрытых электромагнитных клапанов. Такая конфигурация электропневматической системы управления сцеплением позволяет задействовать систему аварийного выключения сцепления при отсутствии электропитания. Приведены опорный алгоритм фильтрации массива данных, поступающих от датчика обратной связи, а также численные значения запаздывания, вызванного наличием фильтра.