Silvia Bracco
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Silvia Bracco has a total of 179 co-authors. Here are the top co-authors by number of shared publications:
- Angiolina Comotti
Dipartimento di Scienza dei Materiali, Università degli Studi Milano-Bicocca, Milano, Italy
48 shared publications - Piero Sozzani
Department of Materials Science University of Milano - Bicocca Via R. Cozzi 55 20125 Milan Italy
35 shared publications - Jacopo Perego
Department of Materials Science University of Milano – Bicocca Milano Italy
21 shared publications - Charl Xavier Bezuidenhout
Dipartimento di Scienza dei Materiali, Università degli Studi Milano-Bicocca, Milano, Italy
16 shared publications Jacopo Perego
Dipartimento di Scienza dei Materiali, Università degli Studi Milano-Bicocca, Milano, Italy
10 shared publications- Mattia Negroni
Radboud University Heyendaalseweg 135
9 shared publications
Latest Publications
- 6 November 2026
- Published by Elsevier in Chem Circularity
A visible-light route to circular carbon management with responsive porous materials
- 6 November 2026
- Published by Elsevier in Chem Circularity
A visible-light route to circular carbon management with responsive porous materials
- Open Access
- 16 April 2026
- Published by Wiley in Advanced Science
- Vol. 13 (58) , e75224
Structural and Compositional Effects on the Scintillation Properties of Fast Emitting Metal‐Organic Frameworks
Metal‐organic framework (MOF) scintillators are promising emitters for fast timing techniques due to their high scintillation efficiency and rapid response time. These materials are composed of high‐atomic‐number metal‐oxide cores connected by scintillating organic dyes. A quite‐overlooked drawback of MOF scintillation properties is the possible presence of intrinsic structural defects and dark states that can introduce energetic disorder and also trap the energy released by the ionizing radiation. Here, we systematically investigate the luminescence properties of three different MOF architectures wherein the scintillating ligand is 9,10‐diphenylanthracene and the linking nodes consist of Zr, In and Hf‐oxo‐hydroxy clusters. The various crystalline structures, the atomic numbers of the constituent elements, and the size of MOF crystals affect their photoluminescence and scintillation properties in distinct ways, providing guidelines to develop systems with optimized performance and tailorable timing capabilities, resulting from the synergy among the properties of the components.
- 16 April 2026
- Published by Wiley in Advanced Science
- Vol. 13 (58) , e75224
Open AccessStructural and Compositional Effects on the Scintillation Properties of Fast Emitting Metal‐Organic Frameworks
Metal‐organic framework (MOF) scintillators are promising emitters for fast timing techniques due to their high scintillation efficiency and rapid response time. These materials are composed of high‐atomic‐number metal‐oxide cores connected by scintillating organic dyes. A quite‐overlooked drawback of MOF scintillation properties is the possible presence of intrinsic structural defects and dark states that can introduce energetic disorder and also trap the energy released by the ionizing radiation. Here, we systematically investigate the luminescence properties of three different MOF architectures wherein the scintillating ligand is 9,10‐diphenylanthracene and the linking nodes consist of Zr, In and Hf‐oxo‐hydroxy clusters. The various crystalline structures, the atomic numbers of the constituent elements, and the size of MOF crystals affect their photoluminescence and scintillation properties in distinct ways, providing guidelines to develop systems with optimized performance and tailorable timing capabilities, resulting from the synergy among the properties of the components.
- Open Access
- 11 April 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (8) , 4038-4045
Sustainable Synthesis and Benchmark CO 2 Uptake in a Zn-Triazole-Based MOF and Its Processable PVDF Composite
- 11 April 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (8) , 4038-4045
Open AccessSustainable Synthesis and Benchmark CO 2 Uptake in a Zn-Triazole-Based MOF and Its Processable PVDF Composite
- Open Access
Diamine Grafting of Pyrazole‐Based MOF‐303 for Diluted‐Source CO 2 Capture
Amine‐functionalized materials have been extensively investigated for CO 2 capture, with adsorption mechanisms based primarily on carbamate formation. Among the different strategies, grafting amine moieties onto porous solid supports represents a benchmark approach for developing highly effective adsorbents, even at very low CO 2 concentrations. In this work, we propose a novel strategy for anchoring amine functionalities onto the surface of a Metal–Organic Framework (MOF), exploiting the unique chemistry/reactivity of the inexpensive and scalable MOF‐303. The pyrazole linkers in MOF‐303 serve as acidic anchoring sites for ethylenediamine molecules (EDAs), protonating one of the two amines to form an ammonium cation, which is then grafted to the pyrazolate moieties through charged‐assisted hydrogen bonds. The resulting MOF‐303#EDA exhibits a remarkable CO 2 uptake of 0.71 mmol g − 1 at 298 K and 450 ppm CO 2 . Notably, the high CO 2 uptake of this material at 0.15 bar (2.5 mmol g −1 ) and its cyclability demonstrated in breakthrough experiments make it a promising candidate for point source CO 2 capture industrial applications. The complex nature of amine grafting on MOF‐303 and its interaction with CO 2 are investigated in depth by combining spectroscopic techniques (FT‐IR and SS‐NMR), synchrotron‐source X‐ray diffraction, and computational modeling.
Open AccessDiamine Grafting of Pyrazole‐Based MOF‐303 for Diluted‐Source CO 2 Capture
Amine‐functionalized materials have been extensively investigated for CO 2 capture, with adsorption mechanisms based primarily on carbamate formation. Among the different strategies, grafting amine moieties onto porous solid supports represents a benchmark approach for developing highly effective adsorbents, even at very low CO 2 concentrations. In this work, we propose a novel strategy for anchoring amine functionalities onto the surface of a Metal–Organic Framework (MOF), exploiting the unique chemistry/reactivity of the inexpensive and scalable MOF‐303. The pyrazole linkers in MOF‐303 serve as acidic anchoring sites for ethylenediamine molecules (EDAs), protonating one of the two amines to form an ammonium cation, which is then grafted to the pyrazolate moieties through charged‐assisted hydrogen bonds. The resulting MOF‐303#EDA exhibits a remarkable CO 2 uptake of 0.71 mmol g − 1 at 298 K and 450 ppm CO 2 . Notably, the high CO 2 uptake of this material at 0.15 bar (2.5 mmol g −1 ) and its cyclability demonstrated in breakthrough experiments make it a promising candidate for point source CO 2 capture industrial applications. The complex nature of amine grafting on MOF‐303 and its interaction with CO 2 are investigated in depth by combining spectroscopic techniques (FT‐IR and SS‐NMR), synchrotron‐source X‐ray diffraction, and computational modeling.
- 17 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (8) , 8700-8710
Coordination-Isomerism-Driven Threshold Pressure Control of CO 2 and C 2 H 2 in Mixed-Ligand Switching Metal−Organic Frameworks
Flexible metal-organic frameworks (MOFs) promise access to superior control and enhanced performance for gas separation, storage, and release. For the development of smart materials with "on-demand" responsiveness, the ad hoc design of switching mechanisms is crucial to drive multiple structural transformations. In this study, doubly interpenetrated pillared Zinc(II)-MOFs were customized to fine-tune CO2 and C2H2 sorption/desorption pressures by modulating their dynamic responses. The incorporation of a specifically designed asymmetric bipyridyl-acrylonitrile pillar, together with benzenedicarboxylate and/or amino-benzenedicarboxylate ligands, leverages reversible metal-coordination isomerism to control gas-stimuli responsiveness. The sophisticated mechanism and temporal response involve framework expansion, node rearrangement, and ligand displacement. Furthermore, evolution of the global dynamics of the framework under cyclical CO2 stimuli was revealed, demonstrating a progression from switching behavior to a permanently open structure. The pore-opening threshold pressure for CO2 and acetylene (C2H2)─from discrete pockets to one-dimensional and two-dimensional interconnected channels─was rationally governed by increasing the amine group content, which modulates the density of hydrogen bonds between the two interpenetrated frameworks. This intricate mechanism was elucidated through in situ PXRD under CO2 atmosphere, calorimetry-coupled gas adsorption, and density functional theory calculations. Notably, C2H2-induced gate opening expands the feasibility of C2H2-responsive systems, offering safer and more efficient sorbents.
- 17 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (8) , 8700-8710
Coordination-Isomerism-Driven Threshold Pressure Control of CO 2 and C 2 H 2 in Mixed-Ligand Switching Metal−Organic Frameworks
Flexible metal-organic frameworks (MOFs) promise access to superior control and enhanced performance for gas separation, storage, and release. For the development of smart materials with "on-demand" responsiveness, the ad hoc design of switching mechanisms is crucial to drive multiple structural transformations. In this study, doubly interpenetrated pillared Zinc(II)-MOFs were customized to fine-tune CO2 and C2H2 sorption/desorption pressures by modulating their dynamic responses. The incorporation of a specifically designed asymmetric bipyridyl-acrylonitrile pillar, together with benzenedicarboxylate and/or amino-benzenedicarboxylate ligands, leverages reversible metal-coordination isomerism to control gas-stimuli responsiveness. The sophisticated mechanism and temporal response involve framework expansion, node rearrangement, and ligand displacement. Furthermore, evolution of the global dynamics of the framework under cyclical CO2 stimuli was revealed, demonstrating a progression from switching behavior to a permanently open structure. The pore-opening threshold pressure for CO2 and acetylene (C2H2)─from discrete pockets to one-dimensional and two-dimensional interconnected channels─was rationally governed by increasing the amine group content, which modulates the density of hydrogen bonds between the two interpenetrated frameworks. This intricate mechanism was elucidated through in situ PXRD under CO2 atmosphere, calorimetry-coupled gas adsorption, and density functional theory calculations. Notably, C2H2-induced gate opening expands the feasibility of C2H2-responsive systems, offering safer and more efficient sorbents.
- Top Cited PapersOpen Access
- 10 February 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Ultrafast scintillating metal-organic framework films
Compositionally engineered metal-organic frameworks are designed and used to fabricate ultrafast scintillating films. The inclusion of hafnium ions in the nodes of the metal-organic framework enhances the interaction with ionizing radiation, partially compensating for the low density of the porous material and increasing the scintillation yield. The high diffusivity of molecular excitons within the framed conjugated ligands allows bimolecular annihilation processes that partially quench the system luminescence, resulting in fast scintillation pulses in the hundreds of picoseconds time scale. Despite the quenching, the gain in scintillation yield achieved is large enough to maintain the film light yield above 104 ph MeV-1 under soft X-rays. These high efficiencies and fast emission kinetics are obtained at room temperature in a technologically attractive solid-state configuration, placing the metal-organic framework platform in a prominent position for the realization of the next generation of fast scintillation counters for high-energy physics studies and medical imaging applications.
- 10 February 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Top Cited PapersOpen AccessUltrafast scintillating metal-organic framework films
Compositionally engineered metal-organic frameworks are designed and used to fabricate ultrafast scintillating films. The inclusion of hafnium ions in the nodes of the metal-organic framework enhances the interaction with ionizing radiation, partially compensating for the low density of the porous material and increasing the scintillation yield. The high diffusivity of molecular excitons within the framed conjugated ligands allows bimolecular annihilation processes that partially quench the system luminescence, resulting in fast scintillation pulses in the hundreds of picoseconds time scale. Despite the quenching, the gain in scintillation yield achieved is large enough to maintain the film light yield above 104 ph MeV-1 under soft X-rays. These high efficiencies and fast emission kinetics are obtained at room temperature in a technologically attractive solid-state configuration, placing the metal-organic framework platform in a prominent position for the realization of the next generation of fast scintillation counters for high-energy physics studies and medical imaging applications.
- Open Access
- 11 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Diamine grafting of pyrazole-based MOF-303 for diluted-source CO2 capture
Amine-functionalized materials have been extensively investigated for CO₂ capture, with adsorption mechanisms based primarily on carbamate formation. Among the different strategies, grafting amine moieties onto porous solid supports represents a benchmark approach for developing highly effective adsorbents, even at very low CO₂ concentrations. In this work, we propose a novel strategy for anchoring amine functionalities onto the surface of a Metal–Organic Framework (MOF), exploiting the unique chemistry/reactivity of the inexpensive and scalable MOF-303. The pyrazole linkers in MOF-303 serve as acidic anchoring sites for ethylenediamine molecules (EDAs), protonating one of the two amines to form an ammonium cation, which are then grafted to the pyrazolate moieties through charged-assisted hydrogen bonds. The resulting MOF-303#EDA exhibits a remarkable CO₂ uptake of 0.71 mmol g⁻¹ at 298 K and 450 ppm CO₂. Notably, the high CO₂ uptake of this material at 0.15 bar (2.5 mmol g-1) and its cyclability demonstrated in breakthrough experiments make it promising candidate for point source CO₂ capture industrial applications. The complex nature of amine grafting on MOF-303 and its interaction with CO₂ were investigated in depth by combining spectroscopic techniques (FT-IR and SS-NMR), synchrotron-source X-ray diffraction, and computational modeling.
- 11 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDiamine grafting of pyrazole-based MOF-303 for diluted-source CO2 capture
Amine-functionalized materials have been extensively investigated for CO₂ capture, with adsorption mechanisms based primarily on carbamate formation. Among the different strategies, grafting amine moieties onto porous solid supports represents a benchmark approach for developing highly effective adsorbents, even at very low CO₂ concentrations. In this work, we propose a novel strategy for anchoring amine functionalities onto the surface of a Metal–Organic Framework (MOF), exploiting the unique chemistry/reactivity of the inexpensive and scalable MOF-303. The pyrazole linkers in MOF-303 serve as acidic anchoring sites for ethylenediamine molecules (EDAs), protonating one of the two amines to form an ammonium cation, which are then grafted to the pyrazolate moieties through charged-assisted hydrogen bonds. The resulting MOF-303#EDA exhibits a remarkable CO₂ uptake of 0.71 mmol g⁻¹ at 298 K and 450 ppm CO₂. Notably, the high CO₂ uptake of this material at 0.15 bar (2.5 mmol g-1) and its cyclability demonstrated in breakthrough experiments make it promising candidate for point source CO₂ capture industrial applications. The complex nature of amine grafting on MOF-303 and its interaction with CO₂ were investigated in depth by combining spectroscopic techniques (FT-IR and SS-NMR), synchrotron-source X-ray diffraction, and computational modeling.
- Open Access
- 6 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (47) , 40874-40885
Organic semiconductor frameworks integrating bay-substituted perylene bisimides as screw dislocation units in onion-like π–π stacked architectures
Core-twisted PBI-based COFs grown on WO 3 3D-NS photoanodes enable photocurrent densities up to 590 ± 50 μA cm −2 under green-light irradiation (>20 h, 1 sun, λ > 490 nm) using sulfonate hydroquinone as a redox mediator.
- 6 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (47) , 40874-40885
Open AccessOrganic semiconductor frameworks integrating bay-substituted perylene bisimides as screw dislocation units in onion-like π–π stacked architectures
Core-twisted PBI-based COFs grown on WO 3 3D-NS photoanodes enable photocurrent densities up to 590 ± 50 μA cm −2 under green-light irradiation (>20 h, 1 sun, λ > 490 nm) using sulfonate hydroquinone as a redox mediator.
- Open Access
- 17 June 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (32) , e202507863
Direct Integration of Functionalized Bridges by One‐Step Superacid‐Catalyzed Reaction to Fabricate Porous Polymers for CO 2 Capture and Separation
A novel class of ultra‐microporous functionalized porous organic polymers (POPs) was developed starting from glyoxylic acid as a cross‐linker and triflic acid as a catalyst on polyaromatic monomers, generating in situ methine bridges with carboxylic acids. This one‐pot synthetic method generated functionalized POPs with high connectivity per each aromatic group and a high density of aliphatic carboxylic acids decorating the pore walls. Remarkably, the functional groups were transformed into esters, Na‐ and Li‐carboxylates by post‐synthetic modification with high yields, generating polyionic porous polymers. These porous polymers displayed excellent CO 2 adsorption at 298 K and isosteric heat of adsorption with values as high as 50 kJ mol −1 for the Na‐containing POP endowed with numerous ionic charges, as estimated by direct measurements with microcalorimetry coupled to CO 2 adsorption isotherms. Dynamic breakthrough experiments on self‐supporting monolithic composites demonstrated high selectivity for CO 2 adsorption over N 2 up to 500 for diluted streams and 340 under relevant conditions for carbon capture from flue gases (0.15 CO 2 partial pressure).
- 17 June 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (32) , e202507863
Open AccessDirect Integration of Functionalized Bridges by One‐Step Superacid‐Catalyzed Reaction to Fabricate Porous Polymers for CO 2 Capture and Separation
A novel class of ultra‐microporous functionalized porous organic polymers (POPs) was developed starting from glyoxylic acid as a cross‐linker and triflic acid as a catalyst on polyaromatic monomers, generating in situ methine bridges with carboxylic acids. This one‐pot synthetic method generated functionalized POPs with high connectivity per each aromatic group and a high density of aliphatic carboxylic acids decorating the pore walls. Remarkably, the functional groups were transformed into esters, Na‐ and Li‐carboxylates by post‐synthetic modification with high yields, generating polyionic porous polymers. These porous polymers displayed excellent CO 2 adsorption at 298 K and isosteric heat of adsorption with values as high as 50 kJ mol −1 for the Na‐containing POP endowed with numerous ionic charges, as estimated by direct measurements with microcalorimetry coupled to CO 2 adsorption isotherms. Dynamic breakthrough experiments on self‐supporting monolithic composites demonstrated high selectivity for CO 2 adsorption over N 2 up to 500 for diluted streams and 340 under relevant conditions for carbon capture from flue gases (0.15 CO 2 partial pressure).
- Open Access
- 8 December 2024
- Published by American Chemical Society (ACS) in Journal of Medicinal Chemistry
- Vol. 67 (24) , 22254-22262
Development of a New Vaccine Adjuvant System Based on the Combination of the Synthetic TLR4 Agonist FP20 and a Synthetic QS-21 Variant
In this study, we formulated an alternative to AS01b by combining FP20, a synthetic TLR4 agonist, and QS21v, a minimal saponin adjuvant, aiming to improve the vaccine efficacy and stability. The phase transition temperature of FP20 was determined by using differential scanning calorimetry to be 43.9 °C, providing a foundation for the formulation process. The coformulation was prepared using a dry film method for even adjuvant distribution. Characterization by dynamic light scattering and nanoparticle tracking analysis revealed a uniform particle size distribution of ∼120 nm. Cryogenic electron microscopy (CryoEM) revealed nanosized interactions between FP20 and QS21v, forming stable structures that likely enhanced the antigen presentation and immune activation. These physicochemical properties contributed to a robust in vivo synergy, where the coformulation elicited significantly higher antigen-specific antibody titers compared to individual adjuvants. These findings suggest that the FP20+QS21v coformulation provides a potent, stable, and safer alternative to traditional adjuvants, enhancing both vaccine efficacy and immunogenicity.
- 8 December 2024
- Published by American Chemical Society (ACS) in Journal of Medicinal Chemistry
- Vol. 67 (24) , 22254-22262
Open AccessDevelopment of a New Vaccine Adjuvant System Based on the Combination of the Synthetic TLR4 Agonist FP20 and a Synthetic QS-21 Variant
In this study, we formulated an alternative to AS01b by combining FP20, a synthetic TLR4 agonist, and QS21v, a minimal saponin adjuvant, aiming to improve the vaccine efficacy and stability. The phase transition temperature of FP20 was determined by using differential scanning calorimetry to be 43.9 °C, providing a foundation for the formulation process. The coformulation was prepared using a dry film method for even adjuvant distribution. Characterization by dynamic light scattering and nanoparticle tracking analysis revealed a uniform particle size distribution of ∼120 nm. Cryogenic electron microscopy (CryoEM) revealed nanosized interactions between FP20 and QS21v, forming stable structures that likely enhanced the antigen presentation and immune activation. These physicochemical properties contributed to a robust in vivo synergy, where the coformulation elicited significantly higher antigen-specific antibody titers compared to individual adjuvants. These findings suggest that the FP20+QS21v coformulation provides a potent, stable, and safer alternative to traditional adjuvants, enhancing both vaccine efficacy and immunogenicity.