MNMattia Negroni

Mattia Negroni

*This is an algorithmically generated author record based on publicly available information.

Mattia Negroni has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mixture Analysis at Micromolar Concentrations with 2D Benchtop NMR Enhanced by SABRE Hyperpolarization

    by Bono O. Jimmink, Mattia Negroni, Thom B. Posthumus, Arno P.M. Kentgens, Marco Tessari

    Because of its low cost and portability, benchtop NMR has become increasingly popular over the last years. However, these low-field instruments lack sensitivity and spectral resolution, which limits their application in real-world problems, particularly at low concentrations. Here, we combine SABRE hyperpolarization with two-dimensional NMR spectroscopy on a benchtop spectrometer to gain sensitivity and spectral resolution. We employ a novel cosubstrate approach, utilizing an α-amino acid, which facilitates measurements at low micromolar concentrations. This approach enabled the complete resolution of a mixture of six N-heteroaromatic compounds at concentrations of 5 μM each, within 20 min. The power of this methodology was further tested on an extract of ground coffee, for which several analytes – estimated in the low micromolar concentration range – were identified.

  • Open Access

    Quantitative Trace Analysis of Dilute Mixtures Using a Benchtop NMR System with SABRE Hyperpolarization

    by Bono O. Jimmink, Mattia Negroni, Thom B. Posthumus, Arno P. M. Kentgens, Marco Tessari

    Despite their modest sensitivity, benchtop NMR spectrometers have recently attracted a great deal of attention, because of their low cost, high portability, and robustness. A solution to the sensitivity limitation of benchtop spectrometers is offered by nuclear spin hyperpolarization, by which large NMR signal enhancements can be realized. Signal Amplification By Reversible Exchange (SABRE) is one-such hyperpolarization technique, which utilizes hydrogen enriched in the para spin-isomer (pH2). However, the application of SABRE with benchtop NMR has so far largely been restricted to sample concentrations in the millimolar range. In this work, we present SABRE hyperpolarization of a mixture at micromolar concentrations, measured on a 1 T benchtop spectrometer. The observed linear dependence between hyperpolarized signals and concentration demonstrates the stability of our approach, which allows quantification in the micromolar range.


  • Open Access

    Enhancing half-integer quadrupolar solid-state NMR signals via steady states: A double frequency sweep-based approach

    by Y. T. Angel Wong, Mattia Negroni, Arno P. M. Kentgens

    We introduce a novel signal enhancement technique, termed steadyDFS, for quadrupolar solid-state nuclear magnetic resonance spectroscopy. It can substantially increase the performance of double frequency sweeps (DFSs) for all half-integer quadrupolar spins (I = 3/2, 5/2, 7/2, and 9/2). In steadyDFS, the DFS and readout pulse are repeated multiple times with a repetition time of TR,DFS to generate a steady state that provides substantial sensitivity enhancement. Using a series of simulations, we show that steadyDFS can outperform conventional DFS methods, and enhancements per unit time of ∼5 to 21 can be achieved depending on the value of I. The sensitivity of steadyDFS is robust toward changes in repetition times and quadrupolar relaxation rates of the system. Moreover, steadyDFS is highly modular and can be combined with quadrupolar Carr–Purcell–Meiboom–Gill (QCPMG) detection. Using 39K (I = 3/2), 17O (I = 5/2), and 49Ti (I = 7/2) as representative challenging nuclei, we show that enhancements up to 46× can be realized experimentally via steadyDFS-QCPMG, translating to a 20× enhancement per unit time. We applied steadyDFS-QCPMG to protonated and deprotonated samples, as well as to samples with a diverse range of transverse relaxation times (i.e., T2/T2*), where steadyDFS-QCPMG can provide an enhancement per unit time of at least 7. For samples that are not amendable to QCPMG, we explored the use of steady-state free precession (SSFP). Although SSFP is fundamentally incompatible with steadyDFS, we show that beneficial results can be obtained when DFSs are combined with SSFP in an interruptive manner.


  • Open Access

    Biphasic NMR of Hyperpolarized Suspensions─Real-Time Monitoring of Solute-to-Solid Conversion to Watch Materials Grow

    by Ertan Turhan, Christopher Pötzl, Waldemar Keil, Mattia Negroni, Karel Kouřil, Benno Meier, Javier Agustin Romero, Krzysztof Kazimierczuk, Ieva Goldberga, Thierry Azaïs, et al.

    Nuclear magnetic resonance (NMR) spectroscopy is a key method for the determination of molecular structures. Due to its intrinsically high (i.e., atomistic) resolution and versatility, it has found numerous applications for investigating gases, liquids, and solids. However, liquid-state NMR has found little application for suspensions of solid particles as the resonances of such systems are excessively broadened, typically beyond the detection threshold. Herein, we propose a route to overcoming this critical limitation by enhancing the signals of particle suspensions by >3.000-fold using dissolution dynamic nuclear polarization (d-DNP) coupled with rapid solid precipitation. For the proof-of-concept series of experiments, we employed calcium phosphate (CaP) as a model system. By d-DNP, we boosted the signals of phosphate 31P spins before rapid CaP precipitation inside the NMR spectrometer, leading to the inclusion of the hyperpolarized phosphate into CaP-nucleated solid particles within milliseconds. With our approach, within only 1 s of acquisition time, we obtained spectra of biphasic systems, i.e., micrometer-sized dilute solid CaP particles coexisting with their solution-state precursors. Thus, this work is a step toward real-time characterization of the solid-solution equilibrium. Finally, integrating the hyperpolarized data with molecular dynamics simulations and electron microscopy enabled us to shed light on the CaP formation mechanism in atomistic detail.


  • Open Access

    Missing Pieces in Structure Puzzles: How Hyperpolarized NMR Spectroscopy Can Complement Structural Biology and Biochemistry

    by Mattia Negroni, Dennis Kurzbach

    Structure determination lies at the heart of many biochemical research programs. However, the “giants”: X‐ray diffraction, electron microscopy, molecular dynamics simulations, and nuclear magnetic resonance, among others, leave quite a few dark spots on the structural pictures drawn of proteins, nucleic acids, membranes, and other biomacromolecules. For example, structural models under physiological conditions or of short‐lived intermediates often remain out of reach of the established experimental methods. This account frames the possibility of including hyperpolarized, that is, dramatically signal‐enhanced NMR in existing workflows to fill these spots with detailed depictions. We highlight how integrating methods based on dissolution dynamic nuclear polarization can provide valuable complementary information about formerly inaccessible conformational spaces for many systems. A particular focus will be on hyperpolarized buffers to facilitate the NMR structure determination of challenging systems.


  • Open Access

    Frémy’s Salt as a Low-Persistence Hyperpolarization Agent: Efficient Dynamic Nuclear Polarization Plus Rapid Radical Scavenging

    by Mattia Negroni, Ertan Turhan, Thomas Kress, Morgan Ceillier, Sami Jannin, Dennis Kurzbach

    Nuclear magnetic resonance (NMR) spectroscopy is a key technique for molecular structure determination in solution. However, due to its low sensitivity, many efforts have been made to improve signal strengths and reduce the required substrate amounts. In this regard, dissolution dynamic nuclear polarization (DDNP) is a versatile approach as signal enhancements of over 10 000-fold are achievable. Samples are signal-enhanced ex situ by transferring electronic polarization from radicals to nuclear spins before dissolving and shuttling the boosted sample to an NMR spectrometer for detection. However, the applicability of DDNP suffers from one major drawback, namely, paramagnetic relaxation enhancements (PREs) that critically reduce relaxation times due to the codissolved radicals. PREs are the primary source of polarization losses canceling the signal improvements obtained by DNP. We solve this problem by using potassium nitrosodisulfonate (Frémy's salt) as polarization agent (PA), which provides high nuclear spin polarization and allows for rapid scavenging under mild reducing conditions. We demonstrate the potential of Frémy's salt, (i) showing that both 1H and 13C polarization of ∼30% can be achieved and (ii) describing a hybrid sample shuttling system (HySSS) that can be used with any DDNP/NMR combination to remove the PA before NMR detection. This gadget mixes the hyperpolarized solution with a radical scavenger and injects it into an NMR tube, providing, within a few seconds, quantitatively radical-free, highly polarized solutions. The cost efficiency and broad availability of Frémy's salt might facilitate the use of DDNP in many fields of research.


  • Open Access

    A novel sample handling system for dissolution dynamic nuclear polarization experiments

    by Thomas Kress, Kateryna Che, Ludovica M. Epasto, Fanny Kozak, Mattia Negroni, Gregory L. Olsen, Albina Selimovic, Dennis Kurzbach

    We present a system for facilitated sample vitrification, melting, and transfer in dissolution dynamic nuclear polarization (DDNP) experiments. In DDNP, a sample is typically hyperpolarized at cryogenic temperatures before dissolution with hot solvent and transfer to a nuclear magnetic resonance (NMR) spectrometer for detection in the liquid state. The resulting signal enhancements can exceed 4 orders of magnitude. However, the sudden temperature jump from cryogenic temperatures close to 1 K to ambient conditions imposes a particular challenge. It is necessary to rapidly melt the sample to avoid a prohibitively fast decay of hyperpolarization. Here, we demonstrate a sample dissolution method that facilitates the temperature jump by eliminating the need to open the cryostat used to cool the sample. This is achieved by inserting the sample through an airlock in combination with a dedicated dissolution system that is inserted through the same airlock shortly before the melting event. The advantages are threefold: (1) the cryostat can be operated continuously at low temperatures. (2) The melting process is rapid as no pressurization steps of the cryostat are required. (3) Blockages of the dissolution system due to freezing of solvents during melting and transfer are minimized.


  • Fast motion of molecular rotors in metal–organic framework struts at very low temperatures

    by Jacopo Perego, Silvia Bracco, Mattia Negroni, Charl X. Bezuidenhout, Giacomo Prando, Pietro Carretta, Angiolina Comotti, Piero Sozzani

    The solid state is typically not well suited to sustaining fast molecular motion, but in recent years a variety of molecular machines, switches and rotors have been successfully engineered within porous crystals and on surfaces. Here we show a fast-rotating molecular rotor within the bicyclopentane–dicarboxylate struts of a zinc-based metal–organic framework—the carboxylate groups anchored to the metal clusters act as an axle while the bicyclic unit is free to rotate. The three-fold bipyramidal symmetry of the rotator conflicts with the four-fold symmetry of the struts within the cubic crystal cell of the zinc metal–organic framework. This frustrates the formation of stable conformations, allowing for the continuous, unidirectional, hyperfast rotation of the bicyclic units with an energy barrier of 6.2 cal mol−1 and a high frequency persistent for several turns even at very low temperatures (1010 Hz below 2 K). Using zirconium instead of zinc led to a different metal cluster–carboxylate coordination arrangement in the resulting metal–organic framework, and much slower rotation of the bicyclic units.


  • Reorientable fluorinated aryl rings in triangular channel Fe-MOFs: an investigation on CO2–matrix interactions

    by J. Perego, C. X. Bezuidenhout, A. Pedrini, S. Bracco, M. Negroni, A. Comotti, P. Sozzani

    Flexible aryl rings in fluorinated Fe-MOFs point C–F dipoles towards the corner of triangular channels capturing efficiently CO2 molecules.


  • Fluorinated porous organic frameworks for improved CO2 and CH4 capture

    by A. Comotti, F. Castiglioni, S. Bracco, J. Perego, A. Pedrini, M. Negroni, P. Sozzani

    Hyperpolarized 129Xe NMR highlights open porosity of fluorinated organic frameworks which show CO2 and CH4 capture with high selectivity towards N2.