Jan-Hendrik Ohlendorf
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jan-Hendrik Ohlendorf has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Klaus-Dieter Thoben
University of Bremen
14 shared publications - Andreas Florian Haselsteiner
University of Bremen BIK -Institute for Integrated Product Development 28359 Bremen Germany
7 shared publications Jan Franke
BIK - Institute for Integrated Product Development, Faculty of Production Engineering, University of Bremen
4 shared publications- Aljoscha Sander
Institute for Integrated Product Development (BIK), Faculty of Production Engineering, University of Bremen, Badgasteiner Straße 1, 28359 Bremen, Germany
3 shared publications Marvin Richrath
BIK - Institute for Integrated Product Development, Faculty of Production Engineering, University of Bremen
3 shared publicationsLars Ischtschuk
2 shared publications
Latest Publications
- Open Access
- 17 July 2026
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 12 (1)
Experimental characterization of holding force thresholds for dry glass fabric preforming
1. The production of fibre-reinforced plastic (FRP) components has steadily increased over the last few decades. To sustain this growth and enable cost-effective, scalable manufacturing, the automa...
- 17 July 2026
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 12 (1)
Open AccessExperimental characterization of holding force thresholds for dry glass fabric preforming
1. The production of fibre-reinforced plastic (FRP) components has steadily increased over the last few decades. To sustain this growth and enable cost-effective, scalable manufacturing, the automa...
- Open Access
- 21 June 2024
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 10 (1)
Investigating the factors influencing the bridging of dry non-crimp fabric on a concave L-shaped mold in an automated draping process
- 21 June 2024
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 10 (1)
Open AccessInvestigating the factors influencing the bridging of dry non-crimp fabric on a concave L-shaped mold in an automated draping process
- Open Access
- 24 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15618
Identification of Machine Learning Relevant Energy and Resource Manufacturing Efficiency Levers
Machine learning (ML) can be a valuable tool for discovering opportunities to save energy and resources in manufacturing systems. However, the hype around ML in the context of Industry 4.0 in the past few years has led to blind usage of the approach, occasionally resulting in usage when another analysis approach would be better suited. The research presented here uses a novel matrix approach to address this lack of differentiation of when to best use ML for improving energy and resource efficiency in manufacturing, by systematically identifying situations in which ML is well suited. Seventeen generic levers for improving manufacturing energy and resource efficiency are defined. Next, a generic list of six manufacturing data scenarios for when ML is a good method of choice for analysis is created. This results in a comprehensive matrix in which each lever is evaluated along each ML scenario and given a point, providing a quantitative ML suitability score for each lever. The evaluation is conducted by drawing on past studies demonstrating whether ML is appropriate. Specifically, operation parameter and input material optimization, as well as intelligent maintenance, are the levers that score the highest and are thus identified to be most suitable for machine learning. The majority of the remaining levers is deemed to have low suitability for machine learning. This simple yet informative matrix can be used as a guideline in data-driven manufacturing energy and resource efficiency projects to provide an appraisal on the applicability of ML as the initial analysis tool of choice.
- 24 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15618
Open AccessIdentification of Machine Learning Relevant Energy and Resource Manufacturing Efficiency Levers
Machine learning (ML) can be a valuable tool for discovering opportunities to save energy and resources in manufacturing systems. However, the hype around ML in the context of Industry 4.0 in the past few years has led to blind usage of the approach, occasionally resulting in usage when another analysis approach would be better suited. The research presented here uses a novel matrix approach to address this lack of differentiation of when to best use ML for improving energy and resource efficiency in manufacturing, by systematically identifying situations in which ML is well suited. Seventeen generic levers for improving manufacturing energy and resource efficiency are defined. Next, a generic list of six manufacturing data scenarios for when ML is a good method of choice for analysis is created. This results in a comprehensive matrix in which each lever is evaluated along each ML scenario and given a point, providing a quantitative ML suitability score for each lever. The evaluation is conducted by drawing on past studies demonstrating whether ML is appropriate. Specifically, operation parameter and input material optimization, as well as intelligent maintenance, are the levers that score the highest and are thus identified to be most suitable for machine learning. The majority of the remaining levers is deemed to have low suitability for machine learning. This simple yet informative matrix can be used as a guideline in data-driven manufacturing energy and resource efficiency projects to provide an appraisal on the applicability of ML as the initial analysis tool of choice.
- 5 May 2022
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 56 (16) , 2509-2524
Investigation of the compaction behaviour of a quasi-unidirectional non-crimp fabric during the vacuum infusion process
The compaction behaviour of technical textiles such as non-crimp fabrics (NCF) is of much interest to build high quality parts in liquid composite moulding processes (LCM). In this paper, the compaction response of a glass fibre NCF was investigated in two different ways: (1) characterisation tests via a universal testing machine and (2) height measurements via a line laser measurement unit during the infusion process. Results from both measurement systems are compared and it is found that the results of characterisation tests via testing machine can be used only to a certain extent. The pressure-thickness correlation during the infusion process cannot be described by the results of the testing machine, while the compaction results before and after the infusion process are in good agreement for both the methods. With the data of the line laser measurement, a model for the pressure-thickness correlation is derived, which can be used in future simulations. The infusion process was carried out using different scenarios at the vent, on the one hand a semi-permeable membrane and on the other hand an omega profile at the venting port. The results obtained using these two different venting scenarios were compared and it was found that using a semi-permeable membrane as an outlet can lead to thicker parts (up to 10 %).
- 5 May 2022
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 56 (16) , 2509-2524
Investigation of the compaction behaviour of a quasi-unidirectional non-crimp fabric during the vacuum infusion process
The compaction behaviour of technical textiles such as non-crimp fabrics (NCF) is of much interest to build high quality parts in liquid composite moulding processes (LCM). In this paper, the compaction response of a glass fibre NCF was investigated in two different ways: (1) characterisation tests via a universal testing machine and (2) height measurements via a line laser measurement unit during the infusion process. Results from both measurement systems are compared and it is found that the results of characterisation tests via testing machine can be used only to a certain extent. The pressure-thickness correlation during the infusion process cannot be described by the results of the testing machine, while the compaction results before and after the infusion process are in good agreement for both the methods. With the data of the line laser measurement, a model for the pressure-thickness correlation is derived, which can be used in future simulations. The infusion process was carried out using different scenarios at the vent, on the one hand a semi-permeable membrane and on the other hand an omega profile at the venting port. The results obtained using these two different venting scenarios were compared and it was found that using a semi-permeable membrane as an outlet can lead to thicker parts (up to 10 %).
- 16 December 2021
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 56 (5) , 665-683
A numerical investigation of the statistical size effect in non-crimp fabric laminates under homogeneous compressive loads
The compressive strength of fiber reinforced composites is typically limited by a shear localization phenomenon known as microbuckling and is very sensitive to local imperfections of fiber alignment. Local misalignments act as randomly distributed flaws and introduce a dependence of the compressive strength on the size of material volume element under consideration. For homogeneously loaded material elements, weakest-link theory in combination with a Weibull power law is a frequently employed statistical model for microbuckling strength. This implies a dependence of strength on the size of volume under consideration. The present contribution investigates the strength–size relation for a non-crimp fabric via a numerical approach. Characteristics of the misalignment flaws used in simulations are derived from a comprehensive data set collected via large-scale measurements of roving dislocations on dry fiber material. Predictions resulting from the weakest-link Weibull theory are compared against strength–size statistics gathered by numerical analysis. In this manner, the size effects in single plies and laminates are quantified. The main findings are that weakest-link Weibull theory is well suited to predict size related strength loss in individual plies. However, it is also found that when plies are bonded to form laminates, misalignments in individual plies are mitigated in a way that is inconsistent with the weakest-link assumption. In all situations considered here, the strength loss expected from weakest-link Weibull theory was outweighed by a strength increase due to the mitigation effect when the volume was increased by adding extra layers to a laminate.
- 16 December 2021
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 56 (5) , 665-683
A numerical investigation of the statistical size effect in non-crimp fabric laminates under homogeneous compressive loads
The compressive strength of fiber reinforced composites is typically limited by a shear localization phenomenon known as microbuckling and is very sensitive to local imperfections of fiber alignment. Local misalignments act as randomly distributed flaws and introduce a dependence of the compressive strength on the size of material volume element under consideration. For homogeneously loaded material elements, weakest-link theory in combination with a Weibull power law is a frequently employed statistical model for microbuckling strength. This implies a dependence of strength on the size of volume under consideration. The present contribution investigates the strength–size relation for a non-crimp fabric via a numerical approach. Characteristics of the misalignment flaws used in simulations are derived from a comprehensive data set collected via large-scale measurements of roving dislocations on dry fiber material. Predictions resulting from the weakest-link Weibull theory are compared against strength–size statistics gathered by numerical analysis. In this manner, the size effects in single plies and laminates are quantified. The main findings are that weakest-link Weibull theory is well suited to predict size related strength loss in individual plies. However, it is also found that when plies are bonded to form laminates, misalignments in individual plies are mitigated in a way that is inconsistent with the weakest-link assumption. In all situations considered here, the strength loss expected from weakest-link Weibull theory was outweighed by a strength increase due to the mitigation effect when the volume was increased by adding extra layers to a laminate.
- Open Access
- 1 September 2021
- Published by Elsevier in Ocean Engineering
- Vol. 236
A benchmarking exercise for environmental contours
- 1 September 2021
- Published by Elsevier in Ocean Engineering
- Vol. 236
Open AccessA benchmarking exercise for environmental contours
- Open Access
- 16 July 2021
- Published by ASME International
Global Hierarchical Models for Wind and Wave Contours: Physical Interpretations of the Dependence Functions
Applications such as the design of offshore wind turbines require the estimation of the joint distributions of variables like wind speed, wave height and wave period. The joint distribution can then be used, for example, to define design load cases using the environmental contour method. Often the joint distribution is described using so-called global hierarchical models. In these
- 16 July 2021
- Published by ASME International
Open AccessGlobal Hierarchical Models for Wind and Wave Contours: Physical Interpretations of the Dependence Functions
Applications such as the design of offshore wind turbines require the estimation of the joint distributions of variables like wind speed, wave height and wave period. The joint distribution can then be used, for example, to define design load cases using the environmental contour method. Often the joint distribution is described using so-called global hierarchical models. In these
- Open Access
- 16 July 2021
- Published by ASME International
Relative Motion During Single Blade Installation: Measurements From the North Sea
During single blade Installation in offshore wind parks, relative motion between nacelle and blade root due to wind and wave excitation pose a significant challenge. While wave excitation can be modelled considerably well by employing state of the art simulation tools and can, therefore, be included in installation planning, other phenomena such as vortex-induced vibrations and
- 16 July 2021
- Published by ASME International
Open AccessRelative Motion During Single Blade Installation: Measurements From the North Sea
During single blade Installation in offshore wind parks, relative motion between nacelle and blade root due to wind and wave excitation pose a significant challenge. While wave excitation can be modelled considerably well by employing state of the art simulation tools and can, therefore, be included in installation planning, other phenomena such as vortex-induced vibrations and
- Open Access
- 1 October 2020
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 6 (4) , 173-190
Towards automation of wind energy rotor blade production: a review of challenges and application examples
- 1 October 2020
- Published by Taylor & Francis in Advanced Manufacturing: Polymer & Composites Science
- Vol. 6 (4) , 173-190
Open AccessTowards automation of wind energy rotor blade production: a review of challenges and application examples
- 21 February 2019
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 141 (5)
Lifting Wind Turbine Components From a Floating Vessel: A Review on Current Solutions and Open Problems
Offshore wind energy is experiencing rapid development and is expected to make up an even bigger part of the world's future energy mix. New installation concepts for offshore wind farms involve lifting operations of wind turbine components from floating vessels. These installation concepts will only be economic if the lifting operations are performed safely at sea states with high significant wave heights. In this paper, we give an overview of current technical solutions, which could be used to lift the components tower, nacelle, hub, and rotor blade from a floating vessel. We classify and analyze solutions found in patents and the academic literature and point out open problems, which need to be addressed to enable lifting operations at higher sea states than what is currently feasible. However, we restrict the paper to technical solutions concerning the interface between the vessel and the component as well as the interface between the component and the crane. Consequently, we analyze, classify, and discuss solutions for the seafastening, the lifting gear as well as motion compensation systems. We find that there exists a large number of solutions, which are specific for a single component, but few solutions, which are applicable to all components without major adaptations. Additionally, we miss hydraulic seafastening mechanisms, which are remotely controlled and synchronized with the lifting operation. Consequently, we argue that versatile interfaces between the component and the crane as well as remotely controlled and synchronized seafastening mechanisms are best suited to enhance the lifting process.
- 21 February 2019
- Published by ASME International in Journal of Offshore Mechanics and Arctic Engineering
- Vol. 141 (5)
Lifting Wind Turbine Components From a Floating Vessel: A Review on Current Solutions and Open Problems
Offshore wind energy is experiencing rapid development and is expected to make up an even bigger part of the world's future energy mix. New installation concepts for offshore wind farms involve lifting operations of wind turbine components from floating vessels. These installation concepts will only be economic if the lifting operations are performed safely at sea states with high significant wave heights. In this paper, we give an overview of current technical solutions, which could be used to lift the components tower, nacelle, hub, and rotor blade from a floating vessel. We classify and analyze solutions found in patents and the academic literature and point out open problems, which need to be addressed to enable lifting operations at higher sea states than what is currently feasible. However, we restrict the paper to technical solutions concerning the interface between the vessel and the component as well as the interface between the component and the crane. Consequently, we analyze, classify, and discuss solutions for the seafastening, the lifting gear as well as motion compensation systems. We find that there exists a large number of solutions, which are specific for a single component, but few solutions, which are applicable to all components without major adaptations. Additionally, we miss hydraulic seafastening mechanisms, which are remotely controlled and synchronized with the lifting operation. Consequently, we argue that versatile interfaces between the component and the crane as well as remotely controlled and synchronized seafastening mechanisms are best suited to enhance the lifting process.