I. V. Alekseeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
I. V. Alekseeva has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandr Lysenko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
17 shared publications - Olena Tachinina
National Aviation University
9 shared publications O. M. Tachinina
National Aviation University,Department of Automation and Energy Management,Kyiv,Ukraine
5 shared publications- Valeriy Novikov
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
5 shared publications - Ihor Sushyn
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
3 shared publications Yu. N. Nemish
3 shared publications
Latest Publications
- 1 January 2026
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 3
Stochastic sufficient optimality conditions for motion control of a group of flying infor-mation and telecommunication robots under full state vector information
The problem of optimal motion control for a group of flying information and telecommunica-tion robots (FITRs) operating under stochastic disturbances has been solved by formulating and proving a theorem on stochastic sufficient optimality conditions. In the proof of the theorem, the real control object, namely the FITR group, has been modeled as a composite dynamic sys-tem (CDS). In deriving the stochastic sufficient conditions for optimality, it has been assumed that all components of the stochastic CDS state vector are available for measurement and that the measurements are error-free. A distinctive feature of the problem statement considered in the paper is that no constraints are imposed on the motion of the constituent elements (blocks) of the system. Such CDS motion is commonly interpreted as the movement of its elements (blocks) along trajectories with arbitrary branching, which is characteristic of a stochastic swarm. An important applied theoretical contribution of the sufficient optimality conditions for controlling a stochastic swarm of information and telecommunication robots (a stochastic com-posite dynamic system) proved in the article is the formulation of a procedure that enables the solution of the optimal control problem for the motion of a stochastic swarm under arbitrary structural transformations of the swarm. The procedure is based on the assumption that the di-mensionality of the state vector and the control vector of the stochastic composite dynamic sys-tem changes at the moments of structural transformations. It should be emphasized that at these moments, the dimensionality of the vectors describing the influence of external disturbances on the FITR also changes. After stochastic optimization of the control of the «consolidated» com-posite object over a given time interval, control is returned to each individual FITR within the consolidated group. Thus, the solution is represented in a form suitable for implementation on an onboard computer (microprocessor) of the individual FITR. The paper demonstrates the the-oretical possibility of offline or online synthesis of individual optimal control for each FITR under stochastic disturbances.
- 1 January 2026
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 3
Stochastic sufficient optimality conditions for motion control of a group of flying infor-mation and telecommunication robots under full state vector information
The problem of optimal motion control for a group of flying information and telecommunica-tion robots (FITRs) operating under stochastic disturbances has been solved by formulating and proving a theorem on stochastic sufficient optimality conditions. In the proof of the theorem, the real control object, namely the FITR group, has been modeled as a composite dynamic sys-tem (CDS). In deriving the stochastic sufficient conditions for optimality, it has been assumed that all components of the stochastic CDS state vector are available for measurement and that the measurements are error-free. A distinctive feature of the problem statement considered in the paper is that no constraints are imposed on the motion of the constituent elements (blocks) of the system. Such CDS motion is commonly interpreted as the movement of its elements (blocks) along trajectories with arbitrary branching, which is characteristic of a stochastic swarm. An important applied theoretical contribution of the sufficient optimality conditions for controlling a stochastic swarm of information and telecommunication robots (a stochastic com-posite dynamic system) proved in the article is the formulation of a procedure that enables the solution of the optimal control problem for the motion of a stochastic swarm under arbitrary structural transformations of the swarm. The procedure is based on the assumption that the di-mensionality of the state vector and the control vector of the stochastic composite dynamic sys-tem changes at the moments of structural transformations. It should be emphasized that at these moments, the dimensionality of the vectors describing the influence of external disturbances on the FITR also changes. After stochastic optimization of the control of the «consolidated» com-posite object over a given time interval, control is returned to each individual FITR within the consolidated group. Thus, the solution is represented in a form suitable for implementation on an onboard computer (microprocessor) of the individual FITR. The paper demonstrates the the-oretical possibility of offline or online synthesis of individual optimal control for each FITR under stochastic disturbances.
- 30 September 2025
- Published by Academy of Cognitive and Natural Sciences
- p. 81-93
Engineering Method for Adjusting Electric Drive Regulators of Manipulator Motion Units With Significant Nonlinearities
The article develops an engineering method for tuning (or reconfiguring during operation) the regulators of electric drives of manipulator mobility units, which takes into account the presence of significant - l system of electric drives of the manipulator's mobility units, which stimulate the emergence of resonant elastic vibrations and self-oscillations (the effect of autoelasticity). The proposed method allows not only to eliminate the cause of the autoelasticity effect, but also to do so at the engineering level of mastery of the mathematical apparatus, computer mathematics systems, and programming skills. The manifestation of the self-elasticity effect is associated with the presence of such factors as: dynamic properties of the drive of mobility units; elastic flexibility of manipulators; significant nonlinearities of a structural and technological nature or those that arise during operation in mechanical and electrical devices. The engineering simplicity and convenience of the method is expressed in the fact that the adjustment of the regulators of electric drives of the mobility units during the manufacture of the manipulator or their reconfiguration during operation does not require specialized scientific research, but can be performed by a specialist with an engineering level of mathematical training in an interactive mode in a short time.
- 30 September 2025
- Published by Academy of Cognitive and Natural Sciences
- p. 81-93
Engineering Method for Adjusting Electric Drive Regulators of Manipulator Motion Units With Significant Nonlinearities
The article develops an engineering method for tuning (or reconfiguring during operation) the regulators of electric drives of manipulator mobility units, which takes into account the presence of significant - l system of electric drives of the manipulator's mobility units, which stimulate the emergence of resonant elastic vibrations and self-oscillations (the effect of autoelasticity). The proposed method allows not only to eliminate the cause of the autoelasticity effect, but also to do so at the engineering level of mastery of the mathematical apparatus, computer mathematics systems, and programming skills. The manifestation of the self-elasticity effect is associated with the presence of such factors as: dynamic properties of the drive of mobility units; elastic flexibility of manipulators; significant nonlinearities of a structural and technological nature or those that arise during operation in mechanical and electrical devices. The engineering simplicity and convenience of the method is expressed in the fact that the adjustment of the regulators of electric drives of the mobility units during the manufacture of the manipulator or their reconfiguration during operation does not require specialized scientific research, but can be performed by a specialist with an engineering level of mathematical training in an interactive mode in a short time.
- 14 October 2024
- Published by Academy of Cognitive and Natural Sciences
- p. 87-98
Generalized integro - differentiating controller for mechatronic devices of mobility nodes of humanoid robots
The article considers the generalized integro-differentiating controller (GID-controller) as an alternative to the PID-controller for use in cascaded SISO LTI systems for automatic control of mechatronic devices of mobility nodes of humanoid robots. GID - controller is set by a generalized integro-differentiating circuit or a connection of an ideal integrator with generalized prejudice-delay compensators. The article shows that the main positive property of the GID controller compared to the PID controller is that, in the presence of the SISO LTI mathematical model of the control object, the primary parametric setting of the GID controller gives a practically acceptable rational result of controlling the robot movements. That is, the initial parametric setting of the GID controller does not require further additional adjustment of the controller parameters. This positive quality of the GID - controller allows you to significantly reduce the time for adjusting the controller parameters on a real object. Therefore, the method of parametric adjustment of the GID - controller was called the method of express adjustment of the generalized integro-differentiating controller (MEA GID - controller). The result of a computer experiment is presented, which showed that the MEA GID - controller provides quality, simplicity, convenience and time saving during parametric adjustment of the controller, which justifies the expediency of using the GID controller for controlling mechatronic devices of robot mobility nodes in general and, in particular, humanoid robots with increased requirements to human-like movements.
- 14 October 2024
- Published by Academy of Cognitive and Natural Sciences
- p. 87-98
Generalized integro - differentiating controller for mechatronic devices of mobility nodes of humanoid robots
The article considers the generalized integro-differentiating controller (GID-controller) as an alternative to the PID-controller for use in cascaded SISO LTI systems for automatic control of mechatronic devices of mobility nodes of humanoid robots. GID - controller is set by a generalized integro-differentiating circuit or a connection of an ideal integrator with generalized prejudice-delay compensators. The article shows that the main positive property of the GID controller compared to the PID controller is that, in the presence of the SISO LTI mathematical model of the control object, the primary parametric setting of the GID controller gives a practically acceptable rational result of controlling the robot movements. That is, the initial parametric setting of the GID controller does not require further additional adjustment of the controller parameters. This positive quality of the GID - controller allows you to significantly reduce the time for adjusting the controller parameters on a real object. Therefore, the method of parametric adjustment of the GID - controller was called the method of express adjustment of the generalized integro-differentiating controller (MEA GID - controller). The result of a computer experiment is presented, which showed that the MEA GID - controller provides quality, simplicity, convenience and time saving during parametric adjustment of the controller, which justifies the expediency of using the GID controller for controlling mechatronic devices of robot mobility nodes in general and, in particular, humanoid robots with increased requirements to human-like movements.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Method of Algorithmic Correction of Dynamic Properties of Special-Purpose Electric Drive
The technique of digital algorithmic correction of dynamic properties of the electric drive is offered. The application of the technique allowed achieving quasi-invariant properties of the electric drive in relation to the angular velocity of its rotor. The method allows synthesizing three digital algorithms: proportional-differential regulator; regulator with correction drive modal dynamic properties; algorithmic meter of angular speed of electric drive rotor. The joint use of these three algorithms allows to reduce the mean-square error of tracking the optimal law of motion by nearly 4 times and to reduce the influence of shock (impulse) disturbances by 3 times. Thus, it becomes reasonable and possible for practical implementation to use only an algorithmic method of improving the dynamic properties of electric drive, which does not require the use of additional equipment.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Method of Algorithmic Correction of Dynamic Properties of Special-Purpose Electric Drive
The technique of digital algorithmic correction of dynamic properties of the electric drive is offered. The application of the technique allowed achieving quasi-invariant properties of the electric drive in relation to the angular velocity of its rotor. The method allows synthesizing three digital algorithms: proportional-differential regulator; regulator with correction drive modal dynamic properties; algorithmic meter of angular speed of electric drive rotor. The joint use of these three algorithms allows to reduce the mean-square error of tracking the optimal law of motion by nearly 4 times and to reduce the influence of shock (impulse) disturbances by 3 times. Thus, it becomes reasonable and possible for practical implementation to use only an algorithmic method of improving the dynamic properties of electric drive, which does not require the use of additional equipment.
- 1 January 2022
- Published by Springer Nature
- p. 874-886
Tuning Methodology for Multi-circuit Digital Regulators of Robot Drives with Adjustable Dynamic Characteristics
- 1 January 2022
- Published by Springer Nature
- p. 874-886
Tuning Methodology for Multi-circuit Digital Regulators of Robot Drives with Adjustable Dynamic Characteristics
- 19 January 2021
- Published by Springer Nature
- p. 112-121
Method for Designing Low-Orbit Clusters of Small Satellites Under Stochastic Disturbances
- 19 January 2021
- Published by Springer Nature
- p. 112-121
Method for Designing Low-Orbit Clusters of Small Satellites Under Stochastic Disturbances
- 1 January 2021
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 3
Development of the method of stochastic dynamic programming with complete information about the state vector in the problem of information and telecommunication robot optimal control
The paper is focused on an information and telecommunication robot (ITR) that is a cluster of precision mobile mechanical objects (sensors or multisensors) that perform a common mission concerning either monitoring or protection of the territory or the coordinates of the search ob-jects location.ITRs are equipped with wireless telecommunication systems and high-performance small-sized on-board computers that allow the use of cloud technologies and fog computing. A group of unmanned aerial vehicles (UAVs) that perform a common mission (such as searching for victims of natural disasters) and are equipped with interoperable wireless tele-communications systems can be considered as a flying ITR. Mobile sensor networks (robotic sensor networks and systems) are also considered as a possible technical implementation of ITR. From a theoretical point of view, these control objects can be classified as composite dy-namic systems (CDS). The article also analyzes the notion of trajectories of composite dynam-ical systems that are called branched trajectories in the scientific literature. These trajectories consist of several sections of joint movement of CDS subsystems and some sections of their individual movement to the targets along separate branches of the trajectory. Analysis of the physical content of the phenomena that accompany the process of ITR (and especially of mobile ITR) functioning has shown that such clusters are under accidental influence. Therefore, sto-chastic CDS should be considered as a model of ITR functioning. To solve the problem of opti-mizing the process of stochastic CDS control, there arises a task of developing a method of sto-chastic dynamic programming with complete information about the vector of the ITR state. The article describes a solution to the problem of stochastic composite dynamic system control op-timization, with an arbitrary branching scheme provided that complete information about the state vector is available.
- 1 January 2021
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 3
Development of the method of stochastic dynamic programming with complete information about the state vector in the problem of information and telecommunication robot optimal control
The paper is focused on an information and telecommunication robot (ITR) that is a cluster of precision mobile mechanical objects (sensors or multisensors) that perform a common mission concerning either monitoring or protection of the territory or the coordinates of the search ob-jects location.ITRs are equipped with wireless telecommunication systems and high-performance small-sized on-board computers that allow the use of cloud technologies and fog computing. A group of unmanned aerial vehicles (UAVs) that perform a common mission (such as searching for victims of natural disasters) and are equipped with interoperable wireless tele-communications systems can be considered as a flying ITR. Mobile sensor networks (robotic sensor networks and systems) are also considered as a possible technical implementation of ITR. From a theoretical point of view, these control objects can be classified as composite dy-namic systems (CDS). The article also analyzes the notion of trajectories of composite dynam-ical systems that are called branched trajectories in the scientific literature. These trajectories consist of several sections of joint movement of CDS subsystems and some sections of their individual movement to the targets along separate branches of the trajectory. Analysis of the physical content of the phenomena that accompany the process of ITR (and especially of mobile ITR) functioning has shown that such clusters are under accidental influence. Therefore, sto-chastic CDS should be considered as a model of ITR functioning. To solve the problem of opti-mizing the process of stochastic CDS control, there arises a task of developing a method of sto-chastic dynamic programming with complete information about the vector of the ITR state. The article describes a solution to the problem of stochastic composite dynamic system control op-timization, with an arbitrary branching scheme provided that complete information about the state vector is available.
- 1 January 2020
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 4
Necessary optimality conditions of control of stochastic compound dynamic system in case of full in-formation about state vector.
Stochastic Compound Dynamic Systems (CDS) are complex technical systems that are created through the use of precision mechanics in combination with modern telecommunications and computer technologies. Incertitude in these CDS shows up under the influence of external and internal stochastic perturbations. The constituent elements of CDS are combined into a single system because these elements perform a single complex mission. The information exchange is wireless, there is no mechanical connection between the elements of the CDS. The paper considers groups of unmanned aerial vehicles (UAVs), which are equipped with sensors or multisensors that are able to perform a mobile sensor network. The trajectories of individual elements of the mobile sensor network are trajectories formed under the influence of stochastic perturbations. This fact means that the nature of the mobile sensor network can be classified as a stochastic compound dynamic system and for the mathematical description and optimization of the movement of this system is adequate to use models and methods for optimizing stochastic CDS. The model of CDS motion is considered to be a branching trajectory or, as they say, a branched trajectory. A stochastic mathematical model of the motion of a mobile sensor network, which performs the combined mission of surveying an emergency zone, can be classified as a model of the motion of a stochastic compound dynamic system. This approach is an adequate for mathematical model creation to the mobile sensor network physical condition, for its operation in the zone of natural disaster by natural or anthropogenic origin. This paper is devoted to solving a theoretical problem related to the formulation and proof of the necessary conditions for stochastic CDS moving optimal control along a branched trajectory with an arbitrary branching scheme.
- 1 January 2020
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 4
Necessary optimality conditions of control of stochastic compound dynamic system in case of full in-formation about state vector.
Stochastic Compound Dynamic Systems (CDS) are complex technical systems that are created through the use of precision mechanics in combination with modern telecommunications and computer technologies. Incertitude in these CDS shows up under the influence of external and internal stochastic perturbations. The constituent elements of CDS are combined into a single system because these elements perform a single complex mission. The information exchange is wireless, there is no mechanical connection between the elements of the CDS. The paper considers groups of unmanned aerial vehicles (UAVs), which are equipped with sensors or multisensors that are able to perform a mobile sensor network. The trajectories of individual elements of the mobile sensor network are trajectories formed under the influence of stochastic perturbations. This fact means that the nature of the mobile sensor network can be classified as a stochastic compound dynamic system and for the mathematical description and optimization of the movement of this system is adequate to use models and methods for optimizing stochastic CDS. The model of CDS motion is considered to be a branching trajectory or, as they say, a branched trajectory. A stochastic mathematical model of the motion of a mobile sensor network, which performs the combined mission of surveying an emergency zone, can be classified as a model of the motion of a stochastic compound dynamic system. This approach is an adequate for mathematical model creation to the mobile sensor network physical condition, for its operation in the zone of natural disaster by natural or anthropogenic origin. This paper is devoted to solving a theoretical problem related to the formulation and proof of the necessary conditions for stochastic CDS moving optimal control along a branched trajectory with an arbitrary branching scheme.
- 1 January 2020
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 2
Features of the application of mathematical models of tests in the conditions of remote control
The paper explores one of the current issues of distance education - the quality of computer tests in terms of ensuring objective control of knowledge. This issue is especially important in today's pandemic and temporary quarantine. The main attention is paid to a statistical analysis of test quality based on test results using CTT and IRT methods. Using modern statistical methods, the authors analyzed the results of testing prepared and conducted during the quarantine period. As an object of study, a test on “Integration of functions of one variable” was chosen, which students completely mastered remotely. The tests were created on the basis of the MOODLE platform at Igor Sikorsky Kyiv Polytechnic Institute, by proffessors of the Department of Mathematical Analysis and Probability Theory. Data processing is carried out using a system for test analysis, created by the authors in the programming environment R. The system allows you to process tests in different areas: pedagogy, psychology, sociology, etc., different in structure; use both CTT and IRT apparatus; work with large data sets; to analyze not only test questions, but also respondents; more accurately differentiate respondents. Based on the study, the possibility of conducting electronic testing remotely was confirmed. The technology used in the study can be used to create and analyze the tasks of external evaluation, conducting session control during quarantine. The use of the methods studied in the work for the analysis of test tasks will increase the competence of high school teachers to conduct electronic remote testing.
- 1 January 2020
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 2
Features of the application of mathematical models of tests in the conditions of remote control
The paper explores one of the current issues of distance education - the quality of computer tests in terms of ensuring objective control of knowledge. This issue is especially important in today's pandemic and temporary quarantine. The main attention is paid to a statistical analysis of test quality based on test results using CTT and IRT methods. Using modern statistical methods, the authors analyzed the results of testing prepared and conducted during the quarantine period. As an object of study, a test on “Integration of functions of one variable” was chosen, which students completely mastered remotely. The tests were created on the basis of the MOODLE platform at Igor Sikorsky Kyiv Polytechnic Institute, by proffessors of the Department of Mathematical Analysis and Probability Theory. Data processing is carried out using a system for test analysis, created by the authors in the programming environment R. The system allows you to process tests in different areas: pedagogy, psychology, sociology, etc., different in structure; use both CTT and IRT apparatus; work with large data sets; to analyze not only test questions, but also respondents; more accurately differentiate respondents. Based on the study, the possibility of conducting electronic testing remotely was confirmed. The technology used in the study can be used to create and analyze the tasks of external evaluation, conducting session control during quarantine. The use of the methods studied in the work for the analysis of test tasks will increase the competence of high school teachers to conduct electronic remote testing.