Ihor Sushyn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ihor Sushyn has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandr Lysenko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
17 shared publications - Valeriy Novikov
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
11 shared publications - Olena Tachinina
National Aviation University
5 shared publications - Valerii Yavisya
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
5 shared publications - Stanislav Valuiskyi
Department of Service and Resource Management Solutions, Netcracker Technology Corp
4 shared publications - I. V. Alekseeva
Department of Mathematical Analysis and Probability Theory, National technical university of Ukraine “Igor Sikorsky Kyiv polytechnic institute”, Kyiv, Ukraine
3 shared publications
Latest Publications
- 26 May 2026
- Published by Springer Nature
- p. 87-98
Quasi-Invariant Controller of Angular Velocity and Torque of Mobility Node Rotor of Production Humanoid Robot
- 26 May 2026
- Published by Springer Nature
- p. 87-98
Quasi-Invariant Controller of Angular Velocity and Torque of Mobility Node Rotor of Production Humanoid Robot
- 1 January 2026
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 3
Stochastic sufficient optimality conditions for motion control of a group of flying infor-mation and telecommunication robots under full state vector information
The problem of optimal motion control for a group of flying information and telecommunica-tion robots (FITRs) operating under stochastic disturbances has been solved by formulating and proving a theorem on stochastic sufficient optimality conditions. In the proof of the theorem, the real control object, namely the FITR group, has been modeled as a composite dynamic sys-tem (CDS). In deriving the stochastic sufficient conditions for optimality, it has been assumed that all components of the stochastic CDS state vector are available for measurement and that the measurements are error-free. A distinctive feature of the problem statement considered in the paper is that no constraints are imposed on the motion of the constituent elements (blocks) of the system. Such CDS motion is commonly interpreted as the movement of its elements (blocks) along trajectories with arbitrary branching, which is characteristic of a stochastic swarm. An important applied theoretical contribution of the sufficient optimality conditions for controlling a stochastic swarm of information and telecommunication robots (a stochastic com-posite dynamic system) proved in the article is the formulation of a procedure that enables the solution of the optimal control problem for the motion of a stochastic swarm under arbitrary structural transformations of the swarm. The procedure is based on the assumption that the di-mensionality of the state vector and the control vector of the stochastic composite dynamic sys-tem changes at the moments of structural transformations. It should be emphasized that at these moments, the dimensionality of the vectors describing the influence of external disturbances on the FITR also changes. After stochastic optimization of the control of the «consolidated» com-posite object over a given time interval, control is returned to each individual FITR within the consolidated group. Thus, the solution is represented in a form suitable for implementation on an onboard computer (microprocessor) of the individual FITR. The paper demonstrates the the-oretical possibility of offline or online synthesis of individual optimal control for each FITR under stochastic disturbances.
- 1 January 2026
- Published by Institute of Mathematical Machines and Systems Problems of the NAS of Ukraine in Mathematical machines and systems
- Vol. 3
Stochastic sufficient optimality conditions for motion control of a group of flying infor-mation and telecommunication robots under full state vector information
The problem of optimal motion control for a group of flying information and telecommunica-tion robots (FITRs) operating under stochastic disturbances has been solved by formulating and proving a theorem on stochastic sufficient optimality conditions. In the proof of the theorem, the real control object, namely the FITR group, has been modeled as a composite dynamic sys-tem (CDS). In deriving the stochastic sufficient conditions for optimality, it has been assumed that all components of the stochastic CDS state vector are available for measurement and that the measurements are error-free. A distinctive feature of the problem statement considered in the paper is that no constraints are imposed on the motion of the constituent elements (blocks) of the system. Such CDS motion is commonly interpreted as the movement of its elements (blocks) along trajectories with arbitrary branching, which is characteristic of a stochastic swarm. An important applied theoretical contribution of the sufficient optimality conditions for controlling a stochastic swarm of information and telecommunication robots (a stochastic com-posite dynamic system) proved in the article is the formulation of a procedure that enables the solution of the optimal control problem for the motion of a stochastic swarm under arbitrary structural transformations of the swarm. The procedure is based on the assumption that the di-mensionality of the state vector and the control vector of the stochastic composite dynamic sys-tem changes at the moments of structural transformations. It should be emphasized that at these moments, the dimensionality of the vectors describing the influence of external disturbances on the FITR also changes. After stochastic optimization of the control of the «consolidated» com-posite object over a given time interval, control is returned to each individual FITR within the consolidated group. Thus, the solution is represented in a form suitable for implementation on an onboard computer (microprocessor) of the individual FITR. The paper demonstrates the the-oretical possibility of offline or online synthesis of individual optimal control for each FITR under stochastic disturbances.
- 29 July 2025
- Published by Springer Nature
- p. 262-272
Algorithm for Implementing the Method of Data Transmission Using Directional Action Sensors
- 29 July 2025
- Published by Springer Nature
- p. 262-272
Algorithm for Implementing the Method of Data Transmission Using Directional Action Sensors
- Open Access
- 24 June 2025
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Information and Telecommunication Sciences
- No. 1,p. 14-21
MATHEMATICAL MODEL AND METHOD OF MAINTAINING CONNECTIVITY IN A MOBILE NETWORK WITH DIRECTED ACTION SENSORS USING TELECOMMUNICATION AERIAL PLATFORMS AT DIFFERENT LOCATION LEVELS
Background. In conditions of modern and forecasted natural and man-made emergencies, mobile sensor networks (MSNs) with telecommunication aerial platforms (TAPs) for effective functioning need to have an energy reserve almost an order of magnitude larger than the current energy reserve. Moreover, existing networks of this type have an unacceptably high delay for information transmission, a low speed of its transmission from node to endpoint, and require the use of an extremely large number of telecommunication aerial platforms to maintain continuous connectivity. Objective. Delay reduction, end-to-end information transmission speed enhancement, and a decrease in the number of TAPs in a mobile sensor network with TAPs, while operating in an emergency zone, where there is no telecommunications infrastructure. Methods. Analysis of literature and modern research related to the topic of ways to improve and evaluate the effectiveness of mobile sensor networks with telecommunication aerial platforms. Identification of strategies and tools employed by researchers in the creation of mathematical models and methods. Development of a mathematical model that allows modelling both the conditions of existence and absence of connectivity for a mobile-directed action sensor network (MDASN) with TAP at different location levels and energy support, and that computes the numerical values of the vector-criterion components used for quantitative appraisal of the effectiveness of this connectivity. Development of maintaining a MDASN connectivity method using TAP at different location levels that solves the stated multi-criteria problem. Results. A significant scientific and technical problem was solved regarding the development of a mathematical model and method of using directed action sensors as part of a mobile sensor network using a two-level spatial arrangement of telecommunication aerial platforms with different energy support to maintain this type of connectivity, which allows achieving a reduction in the average delay time during information transmission and telecommunication aero-platforms quantity directly involved in each information transmission session while increasing the average end-to-end information transmission speed. Conclusions. Based on the obtained results, it can be stated that using the developed mathematical model enables simulation modelling in Matlab computer mathematics system, and method can be used in an expert modelling decision-making system for managing search-and-rescue robots.
- 24 June 2025
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Information and Telecommunication Sciences
- No. 1,p. 14-21
Open AccessMATHEMATICAL MODEL AND METHOD OF MAINTAINING CONNECTIVITY IN A MOBILE NETWORK WITH DIRECTED ACTION SENSORS USING TELECOMMUNICATION AERIAL PLATFORMS AT DIFFERENT LOCATION LEVELS
Background. In conditions of modern and forecasted natural and man-made emergencies, mobile sensor networks (MSNs) with telecommunication aerial platforms (TAPs) for effective functioning need to have an energy reserve almost an order of magnitude larger than the current energy reserve. Moreover, existing networks of this type have an unacceptably high delay for information transmission, a low speed of its transmission from node to endpoint, and require the use of an extremely large number of telecommunication aerial platforms to maintain continuous connectivity. Objective. Delay reduction, end-to-end information transmission speed enhancement, and a decrease in the number of TAPs in a mobile sensor network with TAPs, while operating in an emergency zone, where there is no telecommunications infrastructure. Methods. Analysis of literature and modern research related to the topic of ways to improve and evaluate the effectiveness of mobile sensor networks with telecommunication aerial platforms. Identification of strategies and tools employed by researchers in the creation of mathematical models and methods. Development of a mathematical model that allows modelling both the conditions of existence and absence of connectivity for a mobile-directed action sensor network (MDASN) with TAP at different location levels and energy support, and that computes the numerical values of the vector-criterion components used for quantitative appraisal of the effectiveness of this connectivity. Development of maintaining a MDASN connectivity method using TAP at different location levels that solves the stated multi-criteria problem. Results. A significant scientific and technical problem was solved regarding the development of a mathematical model and method of using directed action sensors as part of a mobile sensor network using a two-level spatial arrangement of telecommunication aerial platforms with different energy support to maintain this type of connectivity, which allows achieving a reduction in the average delay time during information transmission and telecommunication aero-platforms quantity directly involved in each information transmission session while increasing the average end-to-end information transmission speed. Conclusions. Based on the obtained results, it can be stated that using the developed mathematical model enables simulation modelling in Matlab computer mathematics system, and method can be used in an expert modelling decision-making system for managing search-and-rescue robots.
- Open Access
- 23 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Information and Telecommunication Sciences
- No. 2
EVALUATING THE FUNCTIONING EFFECTIVENESS OF SENSOR GROUND-TO-AIR NETWORK USING MULTIPLE UAVS LAYERS AND DIRECTIONAL ANTENNAS
Background. Based on the theoretical and practical (using Atoll) calculation of radio communication lines and antenna devices were estimated the main network parameters (throughput, length of the data transmission route, delays, number of network elements) of proposed ground to air network (GAN) architecture. Objective. The purpose of the work is to evaluate the effectiveness of mobile networks with directed action sensors using UAVs at different levels. Methods. Simulation modelling of two mathematical models and their comparison using MATLAB software. Results. It is shown that the throughput decreases with the increase of the data transmission route, while the delay and the number of network elements increase in accordance with the previous study. Changing the location of the nodes also affects the parameters evaluated, so 10,000 measurements were made to obtain the required amount of statistical data. Two mathematical models were created. The first model is based on an existing mobile omnidirectional sensor network using a single UAV layer while the second one is based on a mobile network of directional sensors using two levels of UAVs. In both models, the data was transmitted from the nodes to the pseudo-satellite. In the proposed model, the following average values were achieved: throughput - 852071 bits/s, number of network elements - 4.4, route length - 33673 meters. Conclusions. According to the obtained results, it can be argued that the proposed two-level UAV location model using directional sensors can be effectively used to maintain the connectivity of a mobile sensor network with the achievement of a gain in the evaluated indicators.
- 23 December 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Information and Telecommunication Sciences
- No. 2
Open AccessEVALUATING THE FUNCTIONING EFFECTIVENESS OF SENSOR GROUND-TO-AIR NETWORK USING MULTIPLE UAVS LAYERS AND DIRECTIONAL ANTENNAS
Background. Based on the theoretical and practical (using Atoll) calculation of radio communication lines and antenna devices were estimated the main network parameters (throughput, length of the data transmission route, delays, number of network elements) of proposed ground to air network (GAN) architecture. Objective. The purpose of the work is to evaluate the effectiveness of mobile networks with directed action sensors using UAVs at different levels. Methods. Simulation modelling of two mathematical models and their comparison using MATLAB software. Results. It is shown that the throughput decreases with the increase of the data transmission route, while the delay and the number of network elements increase in accordance with the previous study. Changing the location of the nodes also affects the parameters evaluated, so 10,000 measurements were made to obtain the required amount of statistical data. Two mathematical models were created. The first model is based on an existing mobile omnidirectional sensor network using a single UAV layer while the second one is based on a mobile network of directional sensors using two levels of UAVs. In both models, the data was transmitted from the nodes to the pseudo-satellite. In the proposed model, the following average values were achieved: throughput - 852071 bits/s, number of network elements - 4.4, route length - 33673 meters. Conclusions. According to the obtained results, it can be argued that the proposed two-level UAV location model using directional sensors can be effectively used to maintain the connectivity of a mobile sensor network with the achievement of a gain in the evaluated indicators.
- 30 July 2024
- Published by Springer Nature
- p. 843-857
UAV Connectivity Maintenance in Wireless Sensor Networks
- 30 July 2024
- Published by Springer Nature
- p. 843-857
UAV Connectivity Maintenance in Wireless Sensor Networks
- 11 November 2023
- Published by Springer Nature
- p. 255-283
Using Krotov’s Functions for the Prompt Synthesis Trajectory of Intelligent Info-communication Robot
- 11 November 2023
- Published by Springer Nature
- p. 255-283
Using Krotov’s Functions for the Prompt Synthesis Trajectory of Intelligent Info-communication Robot
- Open Access
- 24 June 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Information and Telecommunication Sciences
- No. 1,p. 24-34
THE PROGRAM FOR ASSESSING THE CONNECTIVITY OF NODES OF WIRELESS EPISODIC NETWORKS UNDER THE CONDITION OF USING UAVS
Background. Based on analytical mathematical models, the duration of connectivity of mobile subscribers (nodes) (MS) of a wireless episodic network (WEN, consisting of MS and UAV) was investigated in conditions of direct radio visibility and considering the relaying. Objective. The purpose of the work is to find methodological approaches to ensure the connectivity of WSN nodes, which is a necessary condition for obtaining information from WSN in the absence of communication infrastructure.Methods. Simulation modelling based on MAPLE 14 software package and analytical calculation methods are used. Results. It is shown that the duration of connectivity is directly proportional to the size of the coverage area and inversely proportional to the movement speed of nodes. The mobility nature (scenario) of nodes also affects the duration of connectivity. The simulation of the nodes' movement was carried out under 4 scenarios: "march", "incoherent", "random wandering in the field" and "random wandering in the city". The largest values of the connectivity duration correspond to the third scenario, and the smallest - to the second (with a fixed radius of the coverage area and the movement speed of nodes). Thus, the average connectivity duration of the UAV-pedestrian connection in the event of an "incoherent" will be about 36 minutes, and the UAV-car connection - about 5 minutes. Conclusions. The system and functional parameters of the networks, which were obtained as a result of the research, will form the basis of the initial data and limitations of the mathematical model, and will also make it possible to determine the initial placement of the UAV network at the planning stage.
- 24 June 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Information and Telecommunication Sciences
- No. 1,p. 24-34
Open AccessTHE PROGRAM FOR ASSESSING THE CONNECTIVITY OF NODES OF WIRELESS EPISODIC NETWORKS UNDER THE CONDITION OF USING UAVS
Background. Based on analytical mathematical models, the duration of connectivity of mobile subscribers (nodes) (MS) of a wireless episodic network (WEN, consisting of MS and UAV) was investigated in conditions of direct radio visibility and considering the relaying. Objective. The purpose of the work is to find methodological approaches to ensure the connectivity of WSN nodes, which is a necessary condition for obtaining information from WSN in the absence of communication infrastructure.Methods. Simulation modelling based on MAPLE 14 software package and analytical calculation methods are used. Results. It is shown that the duration of connectivity is directly proportional to the size of the coverage area and inversely proportional to the movement speed of nodes. The mobility nature (scenario) of nodes also affects the duration of connectivity. The simulation of the nodes' movement was carried out under 4 scenarios: "march", "incoherent", "random wandering in the field" and "random wandering in the city". The largest values of the connectivity duration correspond to the third scenario, and the smallest - to the second (with a fixed radius of the coverage area and the movement speed of nodes). Thus, the average connectivity duration of the UAV-pedestrian connection in the event of an "incoherent" will be about 36 minutes, and the UAV-car connection - about 5 minutes. Conclusions. The system and functional parameters of the networks, which were obtained as a result of the research, will form the basis of the initial data and limitations of the mathematical model, and will also make it possible to determine the initial placement of the UAV network at the planning stage.