Shing-Yun Chang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shing-Yun Chang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Jie Song
Department of Orthopedics and Physical Rehabilitation, Department of Biochemistry and Molecular Biotechnology, University of Massachusetts Chan Medical School, 55 Lake Avenue North, Worcester, Massachusetts 01655, United States
3 shared publications - Feiyang Chen
Chemistry Department
2 shared publications - Jordan D. Skelly
Department of Orthopedics and Physical Rehabilitation
2 shared publications Aidan P. McAnena
Department of Orthopedics & Physical Rehabilitation, Department of Biochemistry & Molecular Biotechnology, UMass Chan Medical School, 55 Lake Avenue North, Worcester, Massachusetts 01655, United States
1 shared publicationAnanta Ghimire
Department of Orthopedics and Physical Rehabilitation, UMass Chan Medical School, 55 Lake Avenue North, Worcester, Massachusetts 01655, United States
1 shared publication- Anson Wing Kui Ma
University of Connecticut
1 shared publication
Latest Publications
- 26 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (22) , 31909-31922
Tuning Hyaluronic Acid Microstructures by Engineered Amphiphilicity: From Dynamically Cross-Linked Gels to Multilayered Nanoparticles
Amphiphilic biopolymers are of interest for regenerative medicine applications due to their potential to interact with both hydrophobic and hydrophilic bioactive molecules and self-assemble into well-defined microstructures. We show that the amphiphilicity and microstructures of hydrophilic hyaluronic acid (HA) can be explicitly tuned by the stoichiometric integration of cholesterol to azide-functionalized HA via strain-promoted azide-alkyne cycloaddition (SPAAC). At low cholesterol contents, the hydrophobic interactions among the cholesterol units dynamically cross-link cholesteryl HA into physical gels showing enhanced and recoverable viscosities. By SPAAC cross-linking of remaining azides, the interdependence of physical and chemical cross-linking of cholesteryl HA is demonstrated. At higher cholesterol contents, cholesteryl HA self-assembles into multilamellar nanoparticles (NPs) composed of a core of alternately packed cholesterol-rich and HA-rich layers and a hydrated HA-rich outer layer. The amphiphilic NPs not only readily encapsulate hydrophobic compounds but also protect hydrophilic vitamin C from fast degradation in aqueous media. Rapid internalization of cholesteryl HA NPs by rat bone marrow-derived stromal cells and robust in vitro osteogenesis induced by NPs preloaded with dexamethasone and vitamin C were demonstrated. From viscoelastic physical gels, dual-cross-linked gels, to multilamellar NPs, cholesteryl HA with tailored amphiphilicity can be leveraged as versatile macromolecular building blocks for a wide range of regenerative medicine applications.
- 26 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (22) , 31909-31922
Tuning Hyaluronic Acid Microstructures by Engineered Amphiphilicity: From Dynamically Cross-Linked Gels to Multilayered Nanoparticles
Amphiphilic biopolymers are of interest for regenerative medicine applications due to their potential to interact with both hydrophobic and hydrophilic bioactive molecules and self-assemble into well-defined microstructures. We show that the amphiphilicity and microstructures of hydrophilic hyaluronic acid (HA) can be explicitly tuned by the stoichiometric integration of cholesterol to azide-functionalized HA via strain-promoted azide-alkyne cycloaddition (SPAAC). At low cholesterol contents, the hydrophobic interactions among the cholesterol units dynamically cross-link cholesteryl HA into physical gels showing enhanced and recoverable viscosities. By SPAAC cross-linking of remaining azides, the interdependence of physical and chemical cross-linking of cholesteryl HA is demonstrated. At higher cholesterol contents, cholesteryl HA self-assembles into multilamellar nanoparticles (NPs) composed of a core of alternately packed cholesterol-rich and HA-rich layers and a hydrated HA-rich outer layer. The amphiphilic NPs not only readily encapsulate hydrophobic compounds but also protect hydrophilic vitamin C from fast degradation in aqueous media. Rapid internalization of cholesteryl HA NPs by rat bone marrow-derived stromal cells and robust in vitro osteogenesis induced by NPs preloaded with dexamethasone and vitamin C were demonstrated. From viscoelastic physical gels, dual-cross-linked gels, to multilamellar NPs, cholesteryl HA with tailored amphiphilicity can be leveraged as versatile macromolecular building blocks for a wide range of regenerative medicine applications.
- 1 August 2024
- Published by SAGE Publications in 3D Printing and Additive Manufacturing
- Vol. 11 (4) , 1407-1417
Efficient Creation of Jettability Diagrams Using Active Machine Learning
The ability to jet a wide variety of materials consistently from print heads remains a key technical challenge for inkjet-based additive manufacturing processes. Drop watching is the most direct method for testing new inks and print head designs but such experiments are also resource consuming. In this work, a data-efficient machine learning technique called active learning is used to construct detailed jettability diagrams that identify complex regions corresponding to “no jetting,” “jetting,” and “desired jetting,” rather than only individually sampled points. Crucially, our active learning method has resolved challenges with model selection that previously limited the accuracy of active learning in practical settings with very small experimental budgets. In addition, the key “desired jetting” zone may be quite small which is a challenge for initializing active learning. We leverage the physical intuition that the “desired jetting” zone tends to exist between the “jetting” and “no jetting” zone, to improve the performance of this highly imbalanced classification problem by performing two binary classifications in sequence. The first binary classification aims to map out the “jetting” zone versus the “no jetting” zone, while the second binary classification targets identifying the “desired jetting” zone with primary drops only. Our experiments use a stroboscopic drop watcher to visualize the jetting behavior of two fluids from a piezoelectric print head with different jetting waveforms. The results obtained from active learning were compared to a grid search method, which involves running more than 200 experiments for each fluid. The active learning method significantly reduces the number of experiments by 80% while achieving a test accuracy of more than 95% in the “jetting” zone prediction for the test fluids. The ability to construct these jettability diagrams will further accelerate new ink and print head developments.
- 1 August 2024
- Published by SAGE Publications in 3D Printing and Additive Manufacturing
- Vol. 11 (4) , 1407-1417
Efficient Creation of Jettability Diagrams Using Active Machine Learning
The ability to jet a wide variety of materials consistently from print heads remains a key technical challenge for inkjet-based additive manufacturing processes. Drop watching is the most direct method for testing new inks and print head designs but such experiments are also resource consuming. In this work, a data-efficient machine learning technique called active learning is used to construct detailed jettability diagrams that identify complex regions corresponding to “no jetting,” “jetting,” and “desired jetting,” rather than only individually sampled points. Crucially, our active learning method has resolved challenges with model selection that previously limited the accuracy of active learning in practical settings with very small experimental budgets. In addition, the key “desired jetting” zone may be quite small which is a challenge for initializing active learning. We leverage the physical intuition that the “desired jetting” zone tends to exist between the “jetting” and “no jetting” zone, to improve the performance of this highly imbalanced classification problem by performing two binary classifications in sequence. The first binary classification aims to map out the “jetting” zone versus the “no jetting” zone, while the second binary classification targets identifying the “desired jetting” zone with primary drops only. Our experiments use a stroboscopic drop watcher to visualize the jetting behavior of two fluids from a piezoelectric print head with different jetting waveforms. The results obtained from active learning were compared to a grid search method, which involves running more than 200 experiments for each fluid. The active learning method significantly reduces the number of experiments by 80% while achieving a test accuracy of more than 95% in the “jetting” zone prediction for the test fluids. The ability to construct these jettability diagrams will further accelerate new ink and print head developments.
- 1 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (19) , 24421-24430
Triggered Release of Ampicillin from Metallic Implant Coatings for Combating Periprosthetic Infections
Periprosthetic infections caused by Staphylococcus aureus (S. aureus) pose unique challenges in orthopedic surgeries, in part due to the bacterium's capacity to invade surrounding bone tissues besides forming recalcitrant biofilms on implant surfaces. We previously developed prophylactic implant coatings for the on-demand release of vancomycin, triggered by the cleavage of an oligonucleotide (Oligo) linker by micrococcal nuclease (MN) secreted by the Gram-positive bacterium, to eradicate S. aureus surrounding the implant in vitro and in vivo. Building upon this coating platform, here we explore the feasibility of extending the on-demand release to ampicillin, a broad-spectrum aminopenicillin β-lactam antibiotic that is more effective than vancomycin in killing Gram-negative bacteria that may accompany S. aureus infections. The amino group of ampicillin was successfully conjugated to the carboxyl end of an MN-sensitive Oligo covalently integrated in a polymethacrylate hydrogel coating applied to titanium alloy pins. The resultant Oligo-Ampicillin hydrogel coating released the β-lactam in the presence of S. aureus and successfully cleared nearby S. aureus in vitro. When the Oligo-Ampicillin-coated pin was delivered to a rat femoral canal inoculated with 1000 cfu S. aureus, it prevented periprosthetic infection with timely on-demand drug release. The clearance of the bacteria from the pin surface as well as surrounding tissue persisted over 3 months, with no local or systemic toxicity observed with the coating. The negatively charged Oligo fragment attached to ampicillin upon cleavage from the coating did diminish the antibiotic's potency against S. aureus and Escherichia coli (E. coli) to varying degrees, likely due to electrostatic repulsion by the anionic surfaces of the bacteria. Although the on-demand release of the β-lactam led to adequate killing of S. aureus but not E. coli in the presence of a mixture of the bacteria, strong inhibition of the colonization of the remaining E. coli on hydrogel coating was observed. These findings will inspire considerations of alternative broad-spectrum antibiotics, optimized drug conjugation, and Oligo linker engineering for more effective protection against polymicrobial periprosthetic infections.
- 1 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (19) , 24421-24430
Triggered Release of Ampicillin from Metallic Implant Coatings for Combating Periprosthetic Infections
Periprosthetic infections caused by Staphylococcus aureus (S. aureus) pose unique challenges in orthopedic surgeries, in part due to the bacterium's capacity to invade surrounding bone tissues besides forming recalcitrant biofilms on implant surfaces. We previously developed prophylactic implant coatings for the on-demand release of vancomycin, triggered by the cleavage of an oligonucleotide (Oligo) linker by micrococcal nuclease (MN) secreted by the Gram-positive bacterium, to eradicate S. aureus surrounding the implant in vitro and in vivo. Building upon this coating platform, here we explore the feasibility of extending the on-demand release to ampicillin, a broad-spectrum aminopenicillin β-lactam antibiotic that is more effective than vancomycin in killing Gram-negative bacteria that may accompany S. aureus infections. The amino group of ampicillin was successfully conjugated to the carboxyl end of an MN-sensitive Oligo covalently integrated in a polymethacrylate hydrogel coating applied to titanium alloy pins. The resultant Oligo-Ampicillin hydrogel coating released the β-lactam in the presence of S. aureus and successfully cleared nearby S. aureus in vitro. When the Oligo-Ampicillin-coated pin was delivered to a rat femoral canal inoculated with 1000 cfu S. aureus, it prevented periprosthetic infection with timely on-demand drug release. The clearance of the bacteria from the pin surface as well as surrounding tissue persisted over 3 months, with no local or systemic toxicity observed with the coating. The negatively charged Oligo fragment attached to ampicillin upon cleavage from the coating did diminish the antibiotic's potency against S. aureus and Escherichia coli (E. coli) to varying degrees, likely due to electrostatic repulsion by the anionic surfaces of the bacteria. Although the on-demand release of the β-lactam led to adequate killing of S. aureus but not E. coli in the presence of a mixture of the bacteria, strong inhibition of the colonization of the remaining E. coli on hydrogel coating was observed. These findings will inspire considerations of alternative broad-spectrum antibiotics, optimized drug conjugation, and Oligo linker engineering for more effective protection against polymicrobial periprosthetic infections.
- 31 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (31) , 37174-37183
Modulating On-Demand Release of Vancomycin from Implant Coatings via Chemical Modification of a Micrococcal Nuclease-Sensitive Oligonucleotide Linker
Periprosthetic infections are one of the most serious complications in orthopedic surgeries, and those caused by Staphylococcus aureus (S. aureus) are particularly hard to treat due to their tendency to form biofilms on implants and their notorious ability to invade the surrounding bones. The existing prophylactic local antibiotic deliveries involve excessive drug loading doses that could risk the development of drug resistance strains. Utilizing an oligonucleotide linker sensitive to micrococcal nuclease (MN) cleavage, we previously developed an implant coating capable of releasing covalently tethered vancomycin, triggered by S. aureus-secreted MN, to prevent periprosthetic infections in the mouse intramedullary (IM) canal. To further engineer this exciting platform to meet broader clinical needs, here, we chemically modified the oligonucleotide linker by a combination of 2'-O-methylation and phosphorothioate modification to achieve additional modulation of its stability/sensitivity to MN and the kinetics of MN-triggered on-demand release. We found that when all phosphodiester bonds within the oligonucleotide linker 5'-carboxy-mCmGTTmCmG-3-acrydite, except for the one between TT, were replaced by phosphorothioate, the oligonucleotide (6PS) stability significantly increased and enabled the most sustained release of tethered vancomycin from the coating. By contrast, when only the peripheral phosphodiester bonds at the 5'- and 3'-ends were replaced by phosphorothioate, the resulting oligonucleotide (2PS) linker was cleaved by MN more rapidly than that without any PS modifications (0PS). Using a rat femoral canal periprosthetic infection model where 1000 CFU S. aureus was inoculated at the time of IM pin insertion, we showed that the prophylactic implant coating containing either 0PS- or 2PS-modified oligonucleotide linker effectively eradicated the bacteria by enabling the rapid on-demand release of vancomycin. No bacteria were detected from the explanted pins, and no signs of cortical bone changes were detected in these treatment groups throughout the 3 month follow-ups. With an antibiotic tethering dose significantly lower than conventional antibiotic-bearing bone cements, these coatings also exhibited excellent biocompatibility. These chemically modified oligonucleotides could help tailor prophylactic anti-infective coating strategies to meet a range of clinical challenges where the risks for S. aureus prosthetic infections range from transient to long-lasting.
- 31 July 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (31) , 37174-37183
Modulating On-Demand Release of Vancomycin from Implant Coatings via Chemical Modification of a Micrococcal Nuclease-Sensitive Oligonucleotide Linker
Periprosthetic infections are one of the most serious complications in orthopedic surgeries, and those caused by Staphylococcus aureus (S. aureus) are particularly hard to treat due to their tendency to form biofilms on implants and their notorious ability to invade the surrounding bones. The existing prophylactic local antibiotic deliveries involve excessive drug loading doses that could risk the development of drug resistance strains. Utilizing an oligonucleotide linker sensitive to micrococcal nuclease (MN) cleavage, we previously developed an implant coating capable of releasing covalently tethered vancomycin, triggered by S. aureus-secreted MN, to prevent periprosthetic infections in the mouse intramedullary (IM) canal. To further engineer this exciting platform to meet broader clinical needs, here, we chemically modified the oligonucleotide linker by a combination of 2'-O-methylation and phosphorothioate modification to achieve additional modulation of its stability/sensitivity to MN and the kinetics of MN-triggered on-demand release. We found that when all phosphodiester bonds within the oligonucleotide linker 5'-carboxy-mCmGTTmCmG-3-acrydite, except for the one between TT, were replaced by phosphorothioate, the oligonucleotide (6PS) stability significantly increased and enabled the most sustained release of tethered vancomycin from the coating. By contrast, when only the peripheral phosphodiester bonds at the 5'- and 3'-ends were replaced by phosphorothioate, the resulting oligonucleotide (2PS) linker was cleaved by MN more rapidly than that without any PS modifications (0PS). Using a rat femoral canal periprosthetic infection model where 1000 CFU S. aureus was inoculated at the time of IM pin insertion, we showed that the prophylactic implant coating containing either 0PS- or 2PS-modified oligonucleotide linker effectively eradicated the bacteria by enabling the rapid on-demand release of vancomycin. No bacteria were detected from the explanted pins, and no signs of cortical bone changes were detected in these treatment groups throughout the 3 month follow-ups. With an antibiotic tethering dose significantly lower than conventional antibiotic-bearing bone cements, these coatings also exhibited excellent biocompatibility. These chemically modified oligonucleotides could help tailor prophylactic anti-infective coating strategies to meet a range of clinical challenges where the risks for S. aureus prosthetic infections range from transient to long-lasting.
- 1 May 2016
- Published by Elsevier in Food Hydrocolloids
- Vol. 56, 254-265
Effect of trisodium citrate on swelling property and structure of cationic starch thin film
- 1 May 2016
- Published by Elsevier in Food Hydrocolloids
- Vol. 56, 254-265
Effect of trisodium citrate on swelling property and structure of cationic starch thin film