Aleksei Nikitich Kolodin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Aleksei Nikitich Kolodin has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Veronica S. Sulyaeva
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
6 shared publications - Marina L. Kosinova
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
4 shared publications - Mikhail M. Syrokvashin
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
4 shared publications A. I. Bulavchenko
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
3 shared publicationsE. A. Maksimovskiy
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
3 shared publications- Irina Yushina
Laboratory of Functional Films and Coatings, Nikolaev Institute of Inorganic Chemistry, SB RAS, Novosibirsk 630090, Russia
3 shared publications
Latest Publications
- Open Access
- 27 October 2026
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17  (11) , 547
Ti-Containing Mesh Implants Modified by Heterostructures Based on Noble Metal: Fabrication and Study of Biological Activity
Ti-based mesh implants (“titanium silk” TiS and NiTi alloy) offer excellent tissue integration for oncologic surgery but lack intrinsic antibacterial activity. To address this, we fabricated Ag nanoparticles and Ag/M (M = Pt, Au) heterostructures on mesh surfaces via vapor-phase deposition, with noble metal sublayers functionalized by Ag nanofilms and nanoclusters. The modified implants were comprehensively characterized using SEM, AFM, XPS, and ICP-AES and evaluated through in vitro biocompatibility and antibacterial assays. The functional performance of the heterostructures is governed by two key phenomena: a chemical sublayer effect and a geometry-dependent substrate effect, which together dictate ion release kinetics. The Ag/Au interface sustains Ag+ release, whereas Ag/Pt drives rapid Ag+ dissolution. All heterostructures demonstrated effective antibacterial activity against planktonic S. aureus within 24 h. Key factors responsible for reduction in the more resilient P. aeruginosa on the Ag/M heterostructures were hypothesized. Cytotoxicity was dictated by the released ion cocktail: Ag/Pt/NiTi exhibited elevated toxicity which may be associated with the combined release of Ag+, Ni2+ and Pt2+, whereas all Ag/Au-based heterostructures showed excellent biocompatibility (viability 75–108%). Notably, gold sublayers were associated with elevated IL-10 secretion by 72 h. Based on overall biological performance, Ag/Au heterostructures offering sustained antibacterial activity against planktonic bacteria, low cytotoxicity, and a cytokine profile that may be favorable for long-term integration are promising candidates for mesh implants. Also, h-Ag/Pt/TiS showed an optimal balance between rapid antibacterial action and biocompatibility and therefore appears to be a suitable candidate for further in vivo investigation.
- 27 October 2026
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17  (11) , 547
Open AccessTi-Containing Mesh Implants Modified by Heterostructures Based on Noble Metal: Fabrication and Study of Biological Activity
Ti-based mesh implants (“titanium silk” TiS and NiTi alloy) offer excellent tissue integration for oncologic surgery but lack intrinsic antibacterial activity. To address this, we fabricated Ag nanoparticles and Ag/M (M = Pt, Au) heterostructures on mesh surfaces via vapor-phase deposition, with noble metal sublayers functionalized by Ag nanofilms and nanoclusters. The modified implants were comprehensively characterized using SEM, AFM, XPS, and ICP-AES and evaluated through in vitro biocompatibility and antibacterial assays. The functional performance of the heterostructures is governed by two key phenomena: a chemical sublayer effect and a geometry-dependent substrate effect, which together dictate ion release kinetics. The Ag/Au interface sustains Ag+ release, whereas Ag/Pt drives rapid Ag+ dissolution. All heterostructures demonstrated effective antibacterial activity against planktonic S. aureus within 24 h. Key factors responsible for reduction in the more resilient P. aeruginosa on the Ag/M heterostructures were hypothesized. Cytotoxicity was dictated by the released ion cocktail: Ag/Pt/NiTi exhibited elevated toxicity which may be associated with the combined release of Ag+, Ni2+ and Pt2+, whereas all Ag/Au-based heterostructures showed excellent biocompatibility (viability 75–108%). Notably, gold sublayers were associated with elevated IL-10 secretion by 72 h. Based on overall biological performance, Ag/Au heterostructures offering sustained antibacterial activity against planktonic bacteria, low cytotoxicity, and a cytokine profile that may be favorable for long-term integration are promising candidates for mesh implants. Also, h-Ag/Pt/TiS showed an optimal balance between rapid antibacterial action and biocompatibility and therefore appears to be a suitable candidate for further in vivo investigation.
- 14 August 2026
- Published by Pleiades Publishing Ltd in Colloid Journal
- Vol. 88  (4) , 553-568
Influence of Temperature on Surface and Plasmonic Properties of Silver Organosol Films Obtained by Dip-Coating Method
Silver organosol films have been produced by the dip-coating method. The organosol has been stabilized with sodium bis(2-ethylhexyl) sulfosuccinate. The films consist of silver nanoparticles (~20 nm) encapsulated in an organic stabilizer layer (~1 μm). Temperature-induced changes in the surface properties of the films have been investigated. Heat treatment in a range from 25 to 500°C causes significant effects. The film surface becomes more hydrophilic. Surface roughness significantly changes from 16 to 172 nm. The observed changes result from stabilizer decomposition and sintering of silver nanoparticles. Meanwhile, the treatment leads to substantial changes in the plasmonic properties of the films. The surface plasmon resonance (SPR) signal intensity decreases by ~53% (from 1.4 to 0.6). The SPR signal wavelength varies over a wide range from 414 to 454 nm. The ability to tune plasmonic properties with temperature is notable. Thus, the obtained films are promising as disposable SPR-based test systems for optical temperature sensing.
- 14 August 2026
- Published by Pleiades Publishing Ltd in Colloid Journal
- Vol. 88  (4) , 553-568
Influence of Temperature on Surface and Plasmonic Properties of Silver Organosol Films Obtained by Dip-Coating Method
Silver organosol films have been produced by the dip-coating method. The organosol has been stabilized with sodium bis(2-ethylhexyl) sulfosuccinate. The films consist of silver nanoparticles (~20 nm) encapsulated in an organic stabilizer layer (~1 μm). Temperature-induced changes in the surface properties of the films have been investigated. Heat treatment in a range from 25 to 500°C causes significant effects. The film surface becomes more hydrophilic. Surface roughness significantly changes from 16 to 172 nm. The observed changes result from stabilizer decomposition and sintering of silver nanoparticles. Meanwhile, the treatment leads to substantial changes in the plasmonic properties of the films. The surface plasmon resonance (SPR) signal intensity decreases by ~53% (from 1.4 to 0.6). The SPR signal wavelength varies over a wide range from 414 to 454 nm. The ability to tune plasmonic properties with temperature is notable. Thus, the obtained films are promising as disposable SPR-based test systems for optical temperature sensing.
- 18 March 2026
- Published by Pleiades Publishing Ltd in Colloid Journal
- Vol. 88  (2) , 132-146
Temperature-Regulated Surface Properties of Membranes Based on Concentrated Silver Sol Stabilized by AOT in n-Decane
The surface properties of silver membranes (metal content as high as 97 wt %) have been comprehensively analyzed. The membranes have been obtained via the self-assembly from an electrophoretic nanoparticle concentrate (~1.7 M) followed by sintering at 250–500°C. Increasing the sintering temperature makes it possible to modify the surface properties of the resulting membranes. The root-mean-square roughnesses of the front and back sides increase (from 47 to 104 nm and from 119 to 152 nm, respectively), while the porosities decrease (from 52.7 to 28.4% and from 46.1 to 19.9%, respectively). Due to the silver base and the developed porous structure, the samples are characterized by a low mechanical stiffness (~481 kPa) and can be further modified by force lithography. Regardless of the sintering temperature, the membranes exhibit asymmetric wettability. The water contact angle difference between the two sides is as large as 52°. : membrane, organosol, silver nanoparticle, porosity, wettability
- 18 March 2026
- Published by Pleiades Publishing Ltd in Colloid Journal
- Vol. 88  (2) , 132-146
Temperature-Regulated Surface Properties of Membranes Based on Concentrated Silver Sol Stabilized by AOT in n-Decane
The surface properties of silver membranes (metal content as high as 97 wt %) have been comprehensively analyzed. The membranes have been obtained via the self-assembly from an electrophoretic nanoparticle concentrate (~1.7 M) followed by sintering at 250–500°C. Increasing the sintering temperature makes it possible to modify the surface properties of the resulting membranes. The root-mean-square roughnesses of the front and back sides increase (from 47 to 104 nm and from 119 to 152 nm, respectively), while the porosities decrease (from 52.7 to 28.4% and from 46.1 to 19.9%, respectively). Due to the silver base and the developed porous structure, the samples are characterized by a low mechanical stiffness (~481 kPa) and can be further modified by force lithography. Regardless of the sintering temperature, the membranes exhibit asymmetric wettability. The water contact angle difference between the two sides is as large as 52°. : membrane, organosol, silver nanoparticle, porosity, wettability
- 1 September 2025
- Published by Elsevier in Applied Surface Science
- Vol. 714
Synthesis and characterization of silver membranes based on nanoparticle concentrates
- 1 September 2025
- Published by Elsevier in Applied Surface Science
- Vol. 714
Synthesis and characterization of silver membranes based on nanoparticle concentrates
- 28 May 2025
- Published by Pleiades Publishing Ltd in Colloid Journal
- Vol. 87  (3) , 327-339
Optically Active Films Based on AOT-Stabilized Silver Organosol
Composite films based on silver organosols stabilized with an anionic surfactant (AOT, sodium bis(2-ethylhexyl)sulfosuccinate) have been formed on polystyrene substrates by the dip-coating method. The process of film formation has been shown to be accompanied by the appearance of silver aggregates with interparticle distances exceeding the particle diameters. At the same time the aggregation has no effect on the optical properties of the nanoparticles. The obtained films exhibit plasmon absorption signal and the absence of plasmonic delocalization. Variations in the the number of substrate immersions in the sol makes it possible to affect the intensity of the plasmon absorption signal and the functional properties of the resulting coatings, such as their morphology, roughness (from 9 ± 2 to 25 ± 4 nm), thickness (from 585 ± 13 to 831 ± 28 nm), and the wettability of the surface by water (from 36 ± 6 to 53 ± 9°).
- 28 May 2025
- Published by Pleiades Publishing Ltd in Colloid Journal
- Vol. 87  (3) , 327-339
Optically Active Films Based on AOT-Stabilized Silver Organosol
Composite films based on silver organosols stabilized with an anionic surfactant (AOT, sodium bis(2-ethylhexyl)sulfosuccinate) have been formed on polystyrene substrates by the dip-coating method. The process of film formation has been shown to be accompanied by the appearance of silver aggregates with interparticle distances exceeding the particle diameters. At the same time the aggregation has no effect on the optical properties of the nanoparticles. The obtained films exhibit plasmon absorption signal and the absence of plasmonic delocalization. Variations in the the number of substrate immersions in the sol makes it possible to affect the intensity of the plasmon absorption signal and the functional properties of the resulting coatings, such as their morphology, roughness (from 9 ± 2 to 25 ± 4 nm), thickness (from 585 ± 13 to 831 ± 28 nm), and the wettability of the surface by water (from 36 ± 6 to 53 ± 9°).
- 20 April 2025
- Published by Elsevier in Thin Solid Films
- Vol. 821
Silver emulsion films with isotropic mechanical properties and hydrophilic porous surface
- 20 April 2025
- Published by Elsevier in Thin Solid Films
- Vol. 821
Silver emulsion films with isotropic mechanical properties and hydrophilic porous surface
- 1 April 2025
- Published by Pleiades Publishing Ltd in Colloid Journal
- Vol. 87  (2) , 173-183
Temperature-Regulated Wettability of Conductive Films Based on Electrophoretic Silver Nanoparticle Concentrates
Uniform rough films containing up to 73 at % silver have been obtained by the Doctor Blade method from concentrated silver nanoparticle organosols stabilized with sodium bis(2-ethylhexyl) sulfosuccinate. Variations in the wettability of the films have been studied in detail as depending on the conditions of their heat treatment within a temperature range of 50–500°C. The temperature dependence of the contact angles is not monotonic and implies the transition from superhydrophilic to weakly hydrophilic systems due to the processes of sintering of nanoparticles and thermal decomposition of the stabilizer. It has been experimentally shown that a transition from nonconductive to conductive coatings (from 500 to 105 mΩ/sq) is accompanied by a drastic increase in the contact angle (from 25 to 78°).
- 1 April 2025
- Published by Pleiades Publishing Ltd in Colloid Journal
- Vol. 87  (2) , 173-183
Temperature-Regulated Wettability of Conductive Films Based on Electrophoretic Silver Nanoparticle Concentrates
Uniform rough films containing up to 73 at % silver have been obtained by the Doctor Blade method from concentrated silver nanoparticle organosols stabilized with sodium bis(2-ethylhexyl) sulfosuccinate. Variations in the wettability of the films have been studied in detail as depending on the conditions of their heat treatment within a temperature range of 50–500°C. The temperature dependence of the contact angles is not monotonic and implies the transition from superhydrophilic to weakly hydrophilic systems due to the processes of sintering of nanoparticles and thermal decomposition of the stabilizer. It has been experimentally shown that a transition from nonconductive to conductive coatings (from 500 to 105 mΩ/sq) is accompanied by a drastic increase in the contact angle (from 25 to 78°).
- Open Access
A Novel Polymer Film to Develop Heart Valve Prostheses
Polymer heart valves are a promising alternative to bioprostheses, the use of which is limited by the risks of calcific deterioration of devitalized preserved animal tissues. This is especially relevant in connection with the increasingly widespread use of transcatheter valves. Advances in modern organic chemistry provide a wide range of polymers that can replace biological material in the production of valve prostheses. In this work, the main properties of REPEREN® polymer film, synthesized from methacrylic oligomers reinforced with ultra-thin (50 µm) polyamide fibers, are studied. The film structure was studied using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The hydrophilicity and cytocompatibility with EA.hy926 endothelial cells were assessed, and a hemocompatibility evaluation was carried out by studying the platelet aggregation and adhesion upon contact of the REPEREN® with blood. The mechanical behavior and biocompatibility (subcutaneous implantation in rats for up to 90 days, followed by a histological examination) were studied in comparison with a bovine pericardium (BP) cross-linked with an ethylene glycol diglycidyl ether (DE). The results showed that REPEREN® films have two surfaces with a different relief, smooth and rough. The rough surface is more hydrophilic, hemo- and cytocompatible. Compared with the DE-BP, REPEREN® has a higher ultimate tensile stress and better biocompatibility when implanted subcutaneously in rats. The key properties of REPEREN® showed its potential for the development of a polymeric heart valve. Further studies should be devoted to assessing the durability of REPEREN® valves and evaluating their function during orthotopic implantation in large animals.
Open AccessA Novel Polymer Film to Develop Heart Valve Prostheses
Polymer heart valves are a promising alternative to bioprostheses, the use of which is limited by the risks of calcific deterioration of devitalized preserved animal tissues. This is especially relevant in connection with the increasingly widespread use of transcatheter valves. Advances in modern organic chemistry provide a wide range of polymers that can replace biological material in the production of valve prostheses. In this work, the main properties of REPEREN® polymer film, synthesized from methacrylic oligomers reinforced with ultra-thin (50 µm) polyamide fibers, are studied. The film structure was studied using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The hydrophilicity and cytocompatibility with EA.hy926 endothelial cells were assessed, and a hemocompatibility evaluation was carried out by studying the platelet aggregation and adhesion upon contact of the REPEREN® with blood. The mechanical behavior and biocompatibility (subcutaneous implantation in rats for up to 90 days, followed by a histological examination) were studied in comparison with a bovine pericardium (BP) cross-linked with an ethylene glycol diglycidyl ether (DE). The results showed that REPEREN® films have two surfaces with a different relief, smooth and rough. The rough surface is more hydrophilic, hemo- and cytocompatible. Compared with the DE-BP, REPEREN® has a higher ultimate tensile stress and better biocompatibility when implanted subcutaneously in rats. The key properties of REPEREN® showed its potential for the development of a polymeric heart valve. Further studies should be devoted to assessing the durability of REPEREN® valves and evaluating their function during orthotopic implantation in large animals.
- 3 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16  (19) , 24321-24340
Hemocompatibility and Preangiogenic Attributes of SiBxCyNzOm Coatings for Biomedical Applications
In current clinical practices related to orthopedics, dental, and cardiovascular surgeries, a number of biomaterial coatings, such as hydroxyapatite (HAp), diamond-like carbon (DLC), have been used in combination with metallic substrates (stainless steel, Ti6Al4V alloy, etc.). Although SiBCN coatings are widely explored in material science for diverse applications, their potential remains largely unexplored for biomedical applications. With this motivation, the present work reports the development of SiBxCyNzOm coatings on a Ti6Al4V substrate, employing a reactive radiofrequency (RF) magnetron sputtering technique. Three different coating compositions (Si0.27B0.10C0.31N0.07O0.24, Si0.23B0.06C0.21N0.22O0.27, and Si0.20B0.05C0.19N0.20O0.35) were obtained using a Si2BC2N target and varying nitrogen flow rates. The hydrophilic properties of the as-synthesized coatings were rationalized in terms of an increase in the number of oxygen-containing functional groups (OH and NO) on the surface, as probed using XPS and FTIR analyses. Furthermore, the cellular monoculture of SVEC4-10 endothelial cells and L929 fibroblasts established good cytocompatibility. More importantly, the coculture system of SVEC4-10 and L929, in the absence of growth factors, demonstrated clear cellular phenotypical changes, with extensive sprouting leading to tube-like morphologies on the coating surfaces, when stimulated using a customized cell stimulator (StimuCell) with 1.15 V/cm direct current (DC) electric field strength for 1 h. In addition, the hemocompatibility assessment using human blood samples revealed clinically acceptable hemolysis, less erythrocyte adhesion, shorter plasma recalcification, and reduced risk for thrombosis on the SiBxCyNzOm coatings, when compared to uncoated Ti6Al4V. Taken together, the present study unambiguously establishes excellent cytocompatibility, hemocompatibility, and defines the preangiogenic properties of SiBxCyNzOm bioceramic coatings for potential biomedical applications.
- 3 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16  (19) , 24321-24340
Hemocompatibility and Preangiogenic Attributes of SiBxCyNzOm Coatings for Biomedical Applications
In current clinical practices related to orthopedics, dental, and cardiovascular surgeries, a number of biomaterial coatings, such as hydroxyapatite (HAp), diamond-like carbon (DLC), have been used in combination with metallic substrates (stainless steel, Ti6Al4V alloy, etc.). Although SiBCN coatings are widely explored in material science for diverse applications, their potential remains largely unexplored for biomedical applications. With this motivation, the present work reports the development of SiBxCyNzOm coatings on a Ti6Al4V substrate, employing a reactive radiofrequency (RF) magnetron sputtering technique. Three different coating compositions (Si0.27B0.10C0.31N0.07O0.24, Si0.23B0.06C0.21N0.22O0.27, and Si0.20B0.05C0.19N0.20O0.35) were obtained using a Si2BC2N target and varying nitrogen flow rates. The hydrophilic properties of the as-synthesized coatings were rationalized in terms of an increase in the number of oxygen-containing functional groups (OH and NO) on the surface, as probed using XPS and FTIR analyses. Furthermore, the cellular monoculture of SVEC4-10 endothelial cells and L929 fibroblasts established good cytocompatibility. More importantly, the coculture system of SVEC4-10 and L929, in the absence of growth factors, demonstrated clear cellular phenotypical changes, with extensive sprouting leading to tube-like morphologies on the coating surfaces, when stimulated using a customized cell stimulator (StimuCell) with 1.15 V/cm direct current (DC) electric field strength for 1 h. In addition, the hemocompatibility assessment using human blood samples revealed clinically acceptable hemolysis, less erythrocyte adhesion, shorter plasma recalcification, and reduced risk for thrombosis on the SiBxCyNzOm coatings, when compared to uncoated Ti6Al4V. Taken together, the present study unambiguously establishes excellent cytocompatibility, hemocompatibility, and defines the preangiogenic properties of SiBxCyNzOm bioceramic coatings for potential biomedical applications.
- 3 May 2023
- Published by Elsevier in Applied Surface Science
- Vol. 629
Conductive silver films with tunable surface properties: thickness, roughness and porosity
- 3 May 2023
- Published by Elsevier in Applied Surface Science
- Vol. 629
Conductive silver films with tunable surface properties: thickness, roughness and porosity