Irina Yushina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Irina Yushina has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Marina L. Kosinova
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
5 shared publications - Eugeni Maximovski
Nikolaev Institute of Inorganic Chemistry, Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia
4 shared publications - Aleksei Nikitich Kolodin
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
3 shared publications - Evgeniya Ermakova
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
3 shared publications - Vladimir R. Shayapov
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia
3 shared publications - Anastasiya D. Fedorenko
Nikolaev Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences, Ac. Lavrentiev Ave. 3, 630090 Novosibirsk, Russia
2 shared publications
Latest Publications
- Open Access
1,4-Bis(trimethylsilyl)piperazine—Thermal Properties and Application as CVD Precursor
We report an investigation into 1,4-Bis-N,N-(trimethylsilyl)piperazine (BTMSP) as a novel precursor for the synthesis of silicon carbonitride films by chemical vapor deposition (CVD). The thermal stability, temperature dependence of vapor pressure and thermodynamic constants of the evaporation process of BTMSP were determined by static tensimetry with a glass membrane zero manometer. The transformation of the compound in low-power (25 W) plasma conditions was investigated by optical emission spectroscopy. It was shown that BTMSP undergoes destruction, accompanied by H and CH elimination and CN formation. SiCN(H) films were deposited in a hot-wall plasma-enhanced CVD reactor. The optical properties of the films were studied by spectral ellipsometry (refractive index: 1.5–2.2; absorption coefficient: 0–0.12) and UV–Vis spectroscopy (transmittance: up to 95%; optical bandgap: 1.6–4.9 eV). Information on the aging behavior of the films is also provided. The transformation of the films occurred through water adsorption and the formation of Si–O bonds with the degradation of Si–H, N–H and Si–CHx–Si bonds.
Open Access1,4-Bis(trimethylsilyl)piperazine—Thermal Properties and Application as CVD Precursor
We report an investigation into 1,4-Bis-N,N-(trimethylsilyl)piperazine (BTMSP) as a novel precursor for the synthesis of silicon carbonitride films by chemical vapor deposition (CVD). The thermal stability, temperature dependence of vapor pressure and thermodynamic constants of the evaporation process of BTMSP were determined by static tensimetry with a glass membrane zero manometer. The transformation of the compound in low-power (25 W) plasma conditions was investigated by optical emission spectroscopy. It was shown that BTMSP undergoes destruction, accompanied by H and CH elimination and CN formation. SiCN(H) films were deposited in a hot-wall plasma-enhanced CVD reactor. The optical properties of the films were studied by spectral ellipsometry (refractive index: 1.5–2.2; absorption coefficient: 0–0.12) and UV–Vis spectroscopy (transmittance: up to 95%; optical bandgap: 1.6–4.9 eV). Information on the aging behavior of the films is also provided. The transformation of the films occurred through water adsorption and the formation of Si–O bonds with the degradation of Si–H, N–H and Si–CHx–Si bonds.
- Open Access
- 14 April 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (8) , 4959
Boron Carbonitride Films with Tunable Composition: LPCVD and PECVD Synthesis Using Trimethylamine Borane and Nitrogen Mixture and Characterization
This study reports the chemical vapor deposition of amorphous boron carbonitride films on Si(100) and SiO2 substrates using a trimethylamine borane and nitrogen mixture. BCxNy films with different compositions were produced via variations in substrate temperature and type of gas-phase activation. The low-pressure chemical vapor deposition (LPCVD) and plasma-enhanced chemical vapor deposition (PECVD) methods were used. The “elemental composition—chemical bonding state—properties” relationship of synthesized BCxNy was systematically studied. The hydrophilicity, mechanical, and optical properties of the films are discussed in detail. The composition of films deposited by the LPCVD method at temperatures ranging from 673 to 973 K was close to that of boron carbide with a low nitrogen content (BCxNy). The refractive index of these films changed in the range from 2.43 to 2.56 and increased with temperature. The transparency of these films achieved 85%. LPCVD films were hydrophilic and the water contact angles varied between 53 and 63°; the surface free energy was 42–48 mN/m. The microhardness, Young’s modulus and elastic recovery of LPCVD films ranged within 24–28 GPa, 220–247 GPa, and 70–74%, respectively. The structure of the PECVD films was close to that of hexagonal boron nitride, and their composition can be described by the BCxNyOz:H formula. In case of the PECVD process, the smooth films were only produced at low deposition temperatures (373–523 K). The refractive index of these films ranged from 1.51 to 1.67. The transparency of these films achieved 95%; the optical band gap was evaluated as 4.92–5.28 eV. Unlike LPCVD films, they were very soft, and their microhardness, Young’s modulus and elastic recovery were 0.8–1.4 GPa, 25–26 GPa, and 19–28%, respectively. A set of optimized process parameters to fabricate LPCVD BCxNy films with improved mechanical and PECVD films with high transparency is suggested.
- 14 April 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (8) , 4959
Open AccessBoron Carbonitride Films with Tunable Composition: LPCVD and PECVD Synthesis Using Trimethylamine Borane and Nitrogen Mixture and Characterization
This study reports the chemical vapor deposition of amorphous boron carbonitride films on Si(100) and SiO2 substrates using a trimethylamine borane and nitrogen mixture. BCxNy films with different compositions were produced via variations in substrate temperature and type of gas-phase activation. The low-pressure chemical vapor deposition (LPCVD) and plasma-enhanced chemical vapor deposition (PECVD) methods were used. The “elemental composition—chemical bonding state—properties” relationship of synthesized BCxNy was systematically studied. The hydrophilicity, mechanical, and optical properties of the films are discussed in detail. The composition of films deposited by the LPCVD method at temperatures ranging from 673 to 973 K was close to that of boron carbide with a low nitrogen content (BCxNy). The refractive index of these films changed in the range from 2.43 to 2.56 and increased with temperature. The transparency of these films achieved 85%. LPCVD films were hydrophilic and the water contact angles varied between 53 and 63°; the surface free energy was 42–48 mN/m. The microhardness, Young’s modulus and elastic recovery of LPCVD films ranged within 24–28 GPa, 220–247 GPa, and 70–74%, respectively. The structure of the PECVD films was close to that of hexagonal boron nitride, and their composition can be described by the BCxNyOz:H formula. In case of the PECVD process, the smooth films were only produced at low deposition temperatures (373–523 K). The refractive index of these films ranged from 1.51 to 1.67. The transparency of these films achieved 95%; the optical band gap was evaluated as 4.92–5.28 eV. Unlike LPCVD films, they were very soft, and their microhardness, Young’s modulus and elastic recovery were 0.8–1.4 GPa, 25–26 GPa, and 19–28%, respectively. A set of optimized process parameters to fabricate LPCVD BCxNy films with improved mechanical and PECVD films with high transparency is suggested.
- Open Access
Controlling of Chemical Bonding Structure, Wettability, Optical Characteristics of SiCN:H (SiC:H) Films Produced by PECVD Using Tetramethylsilane and Ammonia Mixture
PECVD SiC:H (SiCN:H) films were produced using tetramethylsilane (TMS) as a precursor in a mixture with inert helium or ammonia as a source of nitrogen. Mild plasma conditions were chosen in order to prevent the complete decomposition of the precursor molecules and promote the incorporation of the fragments of precursor into the film structure. The effect of deposition temperature and composition of gas mixture on the chemical bonding structure, elemental composition, deposition rate, and optical properties (transmittance, optical bandgap, and refractive index) of films have been examined. Use of the chosen deposition conditions allowed them to reach a relatively high deposition rate (up to 33 nm/min), compared with films produced in high plasma power conditions. Use of ammonia as an additional gas led to effective incorporation of N atoms in the films. The composition of the films moved from SiC:H to SiN:H with increasing of ammonia content to P(NH3)/P(TMS) = 1. The refractive index and optical bandgap of the films varied in the range of 1.55–2.08 and 3.0–5.2 eV, correspondingly, depending on the film composition and chemical bonding structure. The effect of treatment of SiCN films deposited at 400 °C by plasma of He, O2 or NH3 were studied by X-ray photoelectron spectroscopy, atomic force microscopy, and contact angle measurements. It was shown that plasma treatment significantly changes the surface characteristics. The water contact angle of the film was changed from 71 to 37° after exposure in the plasma conditions.
Open AccessControlling of Chemical Bonding Structure, Wettability, Optical Characteristics of SiCN:H (SiC:H) Films Produced by PECVD Using Tetramethylsilane and Ammonia Mixture
PECVD SiC:H (SiCN:H) films were produced using tetramethylsilane (TMS) as a precursor in a mixture with inert helium or ammonia as a source of nitrogen. Mild plasma conditions were chosen in order to prevent the complete decomposition of the precursor molecules and promote the incorporation of the fragments of precursor into the film structure. The effect of deposition temperature and composition of gas mixture on the chemical bonding structure, elemental composition, deposition rate, and optical properties (transmittance, optical bandgap, and refractive index) of films have been examined. Use of the chosen deposition conditions allowed them to reach a relatively high deposition rate (up to 33 nm/min), compared with films produced in high plasma power conditions. Use of ammonia as an additional gas led to effective incorporation of N atoms in the films. The composition of the films moved from SiC:H to SiN:H with increasing of ammonia content to P(NH3)/P(TMS) = 1. The refractive index and optical bandgap of the films varied in the range of 1.55–2.08 and 3.0–5.2 eV, correspondingly, depending on the film composition and chemical bonding structure. The effect of treatment of SiCN films deposited at 400 °C by plasma of He, O2 or NH3 were studied by X-ray photoelectron spectroscopy, atomic force microscopy, and contact angle measurements. It was shown that plasma treatment significantly changes the surface characteristics. The water contact angle of the film was changed from 71 to 37° after exposure in the plasma conditions.
- Open Access
Chemical Structure, Optical and Dielectric Properties of PECVD SiCN Films Obtained from Novel Precursor
A phenyl derivative of hexamethyldisilazane—bis(trimethylsilyl)phenylamine—was first examined as a single-source precursor for SiCN film preparation by plasma enhanced chemical vapor deposition. The use of mild plasma (20 W) conditions allowed the preparation of highly hydrogenated polymeric-like films. The synthesis was carried out under an inert He atmosphere or under that of NH3 with the deposition temperature range from 100 to 400 °C. The chemical bonding structure and elemental composition were characterized by Fourier-transform infrared spectroscopy, energy-dispersive X-ray analysis and X-ray photoelectron spectroscopy. The surface morphology was investigated by scanning electron microscopy. Ellipsometric porosimetry, a unique high-precision technique to investigate the porosity of thin films, was applied to examine the porosity of SiCN samples. The films were found to possess a morphologically homogenous dense defect-free structure with a porosity of 2–3 vol.%. SiCN films were studied in terms of their optical and dielectric properties. Depending on the deposition conditions the refractive index ranged from 1.53 to 1.78. The optical bandgap obtained using UV-Vis spectroscopy data varied from 2.7 eV for highly hydrogenated polymeric-like film to 4.7 eV for cross-linked nitrogen-rich film. The dielectric constant was found to decrease from 3.51 to 2.99 with the rise of hydrocarbon groups’ content. The results obtained in this study were compared to the literature data to understand the influence of precursor design to the optical and electrical properties of the films.
Open AccessChemical Structure, Optical and Dielectric Properties of PECVD SiCN Films Obtained from Novel Precursor
A phenyl derivative of hexamethyldisilazane—bis(trimethylsilyl)phenylamine—was first examined as a single-source precursor for SiCN film preparation by plasma enhanced chemical vapor deposition. The use of mild plasma (20 W) conditions allowed the preparation of highly hydrogenated polymeric-like films. The synthesis was carried out under an inert He atmosphere or under that of NH3 with the deposition temperature range from 100 to 400 °C. The chemical bonding structure and elemental composition were characterized by Fourier-transform infrared spectroscopy, energy-dispersive X-ray analysis and X-ray photoelectron spectroscopy. The surface morphology was investigated by scanning electron microscopy. Ellipsometric porosimetry, a unique high-precision technique to investigate the porosity of thin films, was applied to examine the porosity of SiCN samples. The films were found to possess a morphologically homogenous dense defect-free structure with a porosity of 2–3 vol.%. SiCN films were studied in terms of their optical and dielectric properties. Depending on the deposition conditions the refractive index ranged from 1.53 to 1.78. The optical bandgap obtained using UV-Vis spectroscopy data varied from 2.7 eV for highly hydrogenated polymeric-like film to 4.7 eV for cross-linked nitrogen-rich film. The dielectric constant was found to decrease from 3.51 to 2.99 with the rise of hydrocarbon groups’ content. The results obtained in this study were compared to the literature data to understand the influence of precursor design to the optical and electrical properties of the films.
- Open Access
Synthesis, Properties and Aging of ICP-CVD SiCxNy:H Films Formed from Tetramethyldisilazane
Amorphous hydrogenated silicon carbonitride films were synthesized on Si(100), Ge(111), and fused silica substrates using the inductively coupled plasma chemical vapor deposition technique. 1,1,3,3-tetramethyldisilazane (TMDSN) was used as a single-source precursor. The effect of the precursor’s pressure in the initial gas mixture, the substrate temperature, the plasma power, and the flow rate of nitrogen gas as an additional reagent on the film growth rate, element composition, chemical bonding, wettability of film surface, and the optical and mechanical properties of a-SiCxNy:H films was investigated. In situ diagnostic studies of the gas phase have been performed by optical emission spectroscopy during the film deposition process. The long-term stability of films was studied over a period of 375 days. Fourier-transform infrared (FTIR) and X-ray energy dispersive spectroscopy (EDX), and wettability measurements elucidated the oxidation of the SiCxNy:H films deposited using TMDSN + N2 mixture. Films obtained from a mixture with argon had high stability and maintained the stability of element composition after long-term storage in ambient air.
Open AccessSynthesis, Properties and Aging of ICP-CVD SiCxNy:H Films Formed from Tetramethyldisilazane
Amorphous hydrogenated silicon carbonitride films were synthesized on Si(100), Ge(111), and fused silica substrates using the inductively coupled plasma chemical vapor deposition technique. 1,1,3,3-tetramethyldisilazane (TMDSN) was used as a single-source precursor. The effect of the precursor’s pressure in the initial gas mixture, the substrate temperature, the plasma power, and the flow rate of nitrogen gas as an additional reagent on the film growth rate, element composition, chemical bonding, wettability of film surface, and the optical and mechanical properties of a-SiCxNy:H films was investigated. In situ diagnostic studies of the gas phase have been performed by optical emission spectroscopy during the film deposition process. The long-term stability of films was studied over a period of 375 days. Fourier-transform infrared (FTIR) and X-ray energy dispersive spectroscopy (EDX), and wettability measurements elucidated the oxidation of the SiCxNy:H films deposited using TMDSN + N2 mixture. Films obtained from a mixture with argon had high stability and maintained the stability of element composition after long-term storage in ambient air.