TCTamer Calisir

Tamer Calisir

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tamer Calisir has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A NOVEL PARAMETRIC ELLIPTICAL BLADE DESIGN METHODOLOGY FOR SAVONIUS WIND TURBINES USING ROBUST AND REPRODUCIBLE GENETIC ALGORITHM-BASED OPTIMIZATION

    by Oguzhan Ulucak, Tamer Calisir

    The increase in energy demand, together with growing energy-supply challenges, is expected to reshape the relationship between energy production and consumption in the coming decades. This transition increases the importance of small-scale and distributed renewable energy systems. Therefore, the Savonius rotor offers important advantages, particularly because of its simple design and suitability for urban environments. Hence, in the present study, a novel blade design methodology where the blade geometry is generated directly from the analytical equation of an ellipse and is fully defined by three parameters as the blade start angle , the end angle , and the angular parameter φ, which governs the blade depth. Afterwards, OpenFOAM simulations were conducted to evaluate the effects of these parameters and generate a dataset consisting of 157 cases for the subsequent surrogate-model development and optimisation. The resulting dataset was used to train an ANN surrogate model. The trained ANN surrogate model was coupled with a GA to perform surrogate-assisted optimization, and the predicted optimum was subsequently validated using CFD simulations. Computational results showed well agreement with literature. The result showed that the rotor efficiency increased by up to 45.32% at the highest investigated Tip Speed Ratio (TSR), with an average improvement of 32.75% over six different operating conditions for the same rotor diameter. In addition, the optimized configuration achieved a 22.32% improvement in coefficient over the reference configuration. In addition, the kinematic analysis demonstrated that increasing the blade-tip angle toward reduces the TSR dependence of the blade-normal component of the relative velocity.

  • Open Access

    Investigation of Trapezoidal Baffle Configurations for Enhanced Heat Transfer and Turbulent Flow Efficiency in Rectangular Channels

    by Alper Başeğmez, Tamer Calisir, Samad Moghanirahimi

    This study presents a high-fidelity numerical investigation into the enhancement of turbulent heat transfer and flow characteristics within a rectangular channel equipped with novel trapezoidal diversion plates. The research systematically evaluates the impact of baffle count and geometry on thermal-hydraulic performance at a high Reynolds number of 87,300. A critical contribution of this work is the comprehensive performance assessment of five turbulence models: Standard k-ε, Standard k-ω, SST k-ω, Spalart–Allmaras, and Reynolds Stress Model (RSM). Validation against experimental data reveals that the RSM and SST k-ω models demonstrate superior predictive accuracy in capturing complex flow physics, with a maximum velocity deviation of only 3.8%. Quantitative findings indicate that increasing the number of trapezoidal baffles induces a jet-like flow acceleration, reaching peak velocities of 13.8 m/s (a 77% increase over inlet velocity) and intensifying turbulence-driven mixing. This structural modification results in a significant increase in the Nusselt number, ranging from 14% to 22% compared to standard configurations. The results fill a prominent gap in literature by providing precise numerical data on the synergy between trapezoidal geometries and second-moment closure models, offering a robust framework for the design of next-generation industrial heat exchangers.


  • Kapalı hacim ı̇çerisı̇ndekı̇ bir elektronı̇k kartın hesaplamalı akışkanlar dinamiği, ı̇letim-tabanlı sonlu elemanlar ve deneysel yöntemlerle parametrı̇k olarak termal açıdan ı̇ncelenmesi

    by Yener Usul, Şenol Başkaya, Tamer Çalışır, Bülent Acar

    Elektronik elemanlar; otomotiv, havacılık, bilişim, ev eşyaları, sağlık vb. gibi endüstrinin birçok alanında yoğun olarak kullanılmaktadır. Sistemlerin güvenilirliği elektronik ünitelerin güvenilirliğine doğrudan bağlı olduğu için elektronik elemanların ısıl yönetimi zorunludur. Bir elektronik sistemin ısıl davranışını incelemek için bazı yaygın yöntemler mevcuttur. Bunlardan biri, en yaygın ve uygun prosedür izlendiği takdirde en güvenilir yöntem olan deneysel yöntemdir. Diğer bir yöntem ise Hesaplamalı Akışkanlar Dinamiği (HAD) analizidir. Bir diğer sayısal yöntem ise iletim-tabanlı Sonlu Elemanlar Yöntemidir (SEY). Bu çalışmada, üzerinde iki adet ısı yayan komponentin bulunduğu bir elektronik kartın kapalı bir hacim içerisinde doğal taşınım altında zamana bağımlı ısıl davranışı farklı sınır koşulları altında HAD, iletim-tabanlı SEY ve deneysel yöntemler kullanılarak incelenmiştir. Öncelikle iki farklı sınır koşulu için deneyler gerçekleştirilmiştir. Deney sonuçları kullanılarak HAD ve iletim-tabanlı SEY analiz modelleri doğrulanmıştır. Daha sonra, beş farklı senaryo için HAD ve iletim-tabanlı SEY analizleri gerçekleştirilmiştir. HAD analizlerinin sonuçları, elektronik kart ve komponentler üzerinde seçilen noktaların zamana bağımlı sıcaklık değişimi, sıcaklık ve basıncın kontur grafikleri ve farklı anlar için farklı kesitlerde kapalı hacim içindeki havanın hız dağılımı olarak sunulmuştur. Seçilen noktalar için HAD ve iletim-tabanlı SEY analizlerinden elde edilen zamana bağımlı sıcaklık değişimleri karşılaştırılmıştır. Sonuçlar arasındaki farklar yaklaşık 70-100°C sıcaklık mertebesi için %10'dan düşük kalmaktadır.

  • A NEW TYPE OF FIN AND CORRELATIONS FOR PLATE-FIN HEAT EXCHANGERS: NUMERICAL INVESTIGATION OF TRIANGULAR PERFORATED OFFSET-STRIP FINS

    by D. D. Çiçek, Senol Baskaya, Tamer Calisir

    The increased demand for energy prompted heat exchanger designers to develop more efficient fin surfaces. Traditional fin surfaces of plate fin heat exchangers yield a high thermal and hydraulic performance, whereas can be improved by considering additional modifications on the fin structures. Therefore, in this study, full-sized Plate-Fin Heat Exchangers (PFHE) with various fin types, were analyzed numerically. Full-sized analyses demonstrated that perforated offset-strip fins offer superior thermal and hydraulic performance. Consequently, correlations for the Colburn factor and Fanning friction factor for these fins have been proposed. To support the single fin analyses, a simplified model which has experimental data from the literature have been studied. The fin named 1/8 15.61 has been chosen to validate the simplified model. Afterwards, a parametric CFD study has been conducted, considering fin heights (H) of 9−18 mm, fin widths (W) of 3−9 mm, hole diameters (d) of 7 and 12 mm, fin thickness (t) of 0.1 mm, fin lengths (Lt) of 50 and 100 mm, and Reynolds numbers of 1000−5000. CFD analyses for single fins have been performed and the variation of the Colburn factor and Fanning friction factor concerning fin parameters and Reynolds numbers have been presented. The correlations have been derived using non-linear regression analysis. The Colburn factor correlations indicated that the for a given fin height (H), increasing the hole diameter increases the Colburn factor, which can be utilized by heat exchanger designers to determine the thermal and hydraulic characteristics of PFHE.


  • Open Access

    INVESTIGATIONS ON THERMAL PERFORMANCE OF AN ELECTRONIC BOARD USING CONDUCTION-BASED FINITE ELEMENT METHOD WITH A NEW MODELING APPROACH

    by Yener Usul, Şenol Başkaya, Bülent Acar, Tamer Çalışır

    Electronic systems are used in almost all areas of industry, with an increasing power consumption rate. This trend makes thermal management of electronics compulsory in order for proper operation. Several methods can be employed to examine electronics’ thermal behavior. Conduction-based Finite Element Method (FEM) for heat transfer analysis is one of them; providing accurate solutions within short solution times is one of its outstanding advantages. Nevertheless, the fluid inside or around the system, usually air for electronic systems, is not included directly in the conduction-based FEM analysis model. This is an essential deficiency in terms of solution accuracy. If this drawback is overcome, conduction-based FEM will become a preferred analysis method, especially for transient problems under natural convection. In this study, a conduction-based FEM analysis model of an electronic board with two heat-dissipating components inside an enclosure under transient natural convection was developed. The procedure of the model involves the correction of unknown input parameters. An experimental investigation was performed, the results of which were used as reference values for the correction process. These unknown parameters were determined iteratively. The iteration was continued until the results of the analysis and those of the experiment matched. The difference between the results of the analysis and those of the experiment was less than 2-3°C. Some parametrical thermal investigations were performed on the electronic board using the final analysis model.

  • Open Access

    Havacılık uygulamaları için açık kaynaklı parametrik bir aerodinamik şekil optimizasyon çerçevesinin geliştirilmesi

    by Buğra Batan, Saleh Abuhanieh, Tamer Çalışıır, Şahin Yiğit

    Sürekli büyüyen havacılık sektöründe uçuş sayısının artması nedeniyle uçakların karbon ayak izi de artış göstermektedir. Uçakların aerodinamik performansının iyileştirilmesi kritik bir gereklilik haline gelmiştir. Bu nedenle, uçak bileşenlerinin tasarımında aerodinamik şekil optimizasyonu (ASO) büyük önem taşımaktadır. Bu çalışmada, transonik rejimde N2A-EXTE hava aracının geometrisi optimize etmek için açık kaynaklı araçlar kullanılarak hesaplamalı akışkanlar dinamiği (HAD) tabanlı parametrik bir ASO çerçevesi tasarlanmıştır. Sunulan ASO çerçevesi kullanılarak elde edilen sonuçlar, N2A-EXTE hava aracı için maksimum olarak %10’luk göreceli iyileştirme yaptığını göstermiştir. Optimize edilmiş aerodinamik yüzeylerin üzerindeki basınç dağılımı ve süpersonik bölgelerin başlangıç geometrisi ile kıyaslanması sonucunda yapılan göreceli iyileştirmenin nedenleri ortaya konmuştur. Ayrıca N2A-EXTE hava aracı için oluşturulan yeni tasarımlar için hacim, yüzey alanı ve boylamsal statik kararlılık karakteristiği açısından orijinal hava aracı geometrisi ile kıyaslanmıştır. Gerçek bir hava aracı üzerinde yapılan optimizasyon çalışmaları mevcut çalışmada önerilen ASO çerçevesinin yeterince kararlı olduğunu ve iyi çalıştığını ortaya koymuştur. Bu çalışmada tasarlanan ASO çerçevesinde yer alan açık kaynak yazılımlar başka tasarım araçları ile yer değiştirilebilir olup farklı havacılık uygulamalarında ve hava araçlarının ön tasarım aşamalarında kolaylıkla kullanılabilmektedir. Mevcut çalışmada sunulan ASO çerçevesi gelecekte yapılacak çok disiplinli ASO çalışmasının ilk adımı olarak düşünülebilir.