Manuel Moriche
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Manuel Moriche has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Manuel Garcia-Villalba
Institute of Fluid Mechanics and Heat Transfer TU Wien Vienna Austria
12 shared publications - Oscar Flores
Department of Aerospace Engineering Universidad Carlos III de Madrid, Madrid, Spain
9 shared publications - Markus Uhlmann
Karlsruhe Institute of Technology
5 shared publications - Alejandro Gonzalo
Department of Mechanical Engineering, University of Washington, Seattle, WA, United States
2 shared publications Daniel Hettmann
Institute for Hydromechanics, Karlsruhe Institute of Technology, Germany
2 shared publications- Gonzalo Arranz
Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, Cambridge, USA
2 shared publications
Latest Publications
- Open Access
- 9 March 2025
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 188
An immersed boundary method for particle-resolved simulations of arbitrary-shaped rigid particles
- 9 March 2025
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 188
Open AccessAn immersed boundary method for particle-resolved simulations of arbitrary-shaped rigid particles
- Open Access
- 30 January 2024
- Published by Springer Nature in Acta Mechanica
- Vol. 235 (4) , 2479-2493
On the settling of a spherical particle in slightly perturbed ambient fluid
Direct numerical simulations of the settling of a spherical particle under the action of gravity in a slightly perturbed ambient fluid have been performed. The ambient perturbations are generated using a synthetic turbulence inflow generator method, and their length scale and intensity are varied to study their influence on the particle motion. The Galileo number is 151 and the solid-to-fluid density ratio is 1.5, so that in the absence of perturbations, the particle settles following a steady vertical trajectory. It has been found that the ambient perturbations trigger the formation of double-threaded vortical structures in the wake of the particle. These structures resemble those that appear in the oblique oscillating regime that is found in the absence of perturbations at higher Galileo numbers. Due to the flow perturbations the particle is pushed randomly in all directions, and this results in a combination of slow lateral drifts along fixed directions and relatively fast excursions in random directions. The particle response has been characterized using probability density functions of the velocity in the cross-plane and persistence probability. The slow drifts are strongly influenced by the size of the perturbations and by the rotational motion of the particle, while the intensity of the perturbations seems to play a minor role.
- 30 January 2024
- Published by Springer Nature in Acta Mechanica
- Vol. 235 (4) , 2479-2493
Open AccessOn the settling of a spherical particle in slightly perturbed ambient fluid
Direct numerical simulations of the settling of a spherical particle under the action of gravity in a slightly perturbed ambient fluid have been performed. The ambient perturbations are generated using a synthetic turbulence inflow generator method, and their length scale and intensity are varied to study their influence on the particle motion. The Galileo number is 151 and the solid-to-fluid density ratio is 1.5, so that in the absence of perturbations, the particle settles following a steady vertical trajectory. It has been found that the ambient perturbations trigger the formation of double-threaded vortical structures in the wake of the particle. These structures resemble those that appear in the oblique oscillating regime that is found in the absence of perturbations at higher Galileo numbers. Due to the flow perturbations the particle is pushed randomly in all directions, and this results in a combination of slow lateral drifts along fixed directions and relatively fast excursions in random directions. The particle response has been characterized using probability density functions of the velocity in the cross-plane and persistence probability. The slow drifts are strongly influenced by the size of the perturbations and by the rotational motion of the particle, while the intensity of the perturbations seems to play a minor role.
- Open Access
- 15 May 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 963, A1
On the clustering of low-aspect-ratio oblate spheroids settling in ambient fluid
We have performed particle-resolved direct numerical simulations of many heavy non-spherical particles settling under gravity in the dilute regime. The particles are oblate spheroids of aspect ratio $1.5$ and density ratio $1.5$ . Two Galileo numbers are considered, namely $111$ and $152$ , for which a single oblate spheroid follows a steady vertical and a steady oblique path, respectively. In both cases, a strongly inhomogeneous spatial distribution of the disperse phase in the form of columnar clusters is observed, with a significantly enhanced average settling velocity as a consequence. Thus, in contrast to previous results for spheres, the qualitative difference in the single-particle regime does not result in a qualitatively different behaviour of the many-particle cases. In addition, we have carried out an analysis of pairwise interactions of particles in the well-known drafting–kissing–tumbling set-up, for oblate spheroids of aspect ratio $1.5$ and for spheres. We have varied systematically the relative initial position between the particle pair and we have considered free-to-rotate particles and rotationally locked ones. We have found that the region of attraction for both particle shapes, with and without rotation, is very similar. However, significant differences occur during the drafting and tumbling phases. In particular, free-to-rotate spheres present longer drafting phases and separate quickly after the collision. Spheroids remain close to each other for longer times after the collision, and free-to-rotate ones experience two or more collision events. Therefore, we have observed a shape-induced increase in the interaction time which might explain the increased tendency to cluster of the many-particle cases.- 15 May 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 963, A1
Open AccessOn the clustering of low-aspect-ratio oblate spheroids settling in ambient fluid
We have performed particle-resolved direct numerical simulations of many heavy non-spherical particles settling under gravity in the dilute regime. The particles are oblate spheroids of aspect ratio $1.5$ and density ratio $1.5$ . Two Galileo numbers are considered, namely $111$ and $152$ , for which a single oblate spheroid follows a steady vertical and a steady oblique path, respectively. In both cases, a strongly inhomogeneous spatial distribution of the disperse phase in the form of columnar clusters is observed, with a significantly enhanced average settling velocity as a consequence. Thus, in contrast to previous results for spheres, the qualitative difference in the single-particle regime does not result in a qualitatively different behaviour of the many-particle cases. In addition, we have carried out an analysis of pairwise interactions of particles in the well-known drafting–kissing–tumbling set-up, for oblate spheroids of aspect ratio $1.5$ and for spheres. We have varied systematically the relative initial position between the particle pair and we have considered free-to-rotate particles and rotationally locked ones. We have found that the region of attraction for both particle shapes, with and without rotation, is very similar. However, significant differences occur during the drafting and tumbling phases. In particular, free-to-rotate spheres present longer drafting phases and separate quickly after the collision. Spheroids remain close to each other for longer times after the collision, and free-to-rotate ones experience two or more collision events. Therefore, we have observed a shape-induced increase in the interaction time which might explain the increased tendency to cluster of the many-particle cases. - Open Access
On the clustering of low-aspect-ratio oblate spheroids settling in ambient fluid
We have performed particle-resolved direct numerical simulations of many heavy non-spherical particles settling under gravity in the dilute regime. The particles are oblate spheroids of aspect ratio 1.5 and density ratio 1.5. Two Galileo numbers are considered, namely 111 and 152, for which a single oblate spheroid follows a steady vertical and a steady oblique path, respectively. In both cases, a strongly inhomogeneous spatial distribution of the disperse phase in the form of columnar clusters is observed, with a significantly enhanced average settling velocity as a consequence. Thus, in contrast to previous results for spheres, the qualitative difference in the single particle regime does not result in a qualitatively different behavior of the many-particle cases. In addition, we have carried out an analysis of pairwise interactions of particles in the well-known drafting-kissing-tumbling setup, for oblate spheroids of aspect ratio 1.5 and for spheres. We have varied systematically the relative initial position between the particle pair and we have considered free-to-rotate particles and rotationally-locked ones. We have found that the region of attraction for both particle shapes, with and without rotation, is very similar. However, significant differences occur during the drafting and tumbling phases. In particular, free-to-rotate spheres present longer drafting phases and separate quickly after the collision. Spheroids remain close to each other for longer times after the collision, and free-to-rotate ones experience two or more collision events. Therefore, we have observed a shape-induced increase in the interaction which might explain the increased tendency to cluster of the many-particle cases.
Open AccessOn the clustering of low-aspect-ratio oblate spheroids settling in ambient fluid
We have performed particle-resolved direct numerical simulations of many heavy non-spherical particles settling under gravity in the dilute regime. The particles are oblate spheroids of aspect ratio 1.5 and density ratio 1.5. Two Galileo numbers are considered, namely 111 and 152, for which a single oblate spheroid follows a steady vertical and a steady oblique path, respectively. In both cases, a strongly inhomogeneous spatial distribution of the disperse phase in the form of columnar clusters is observed, with a significantly enhanced average settling velocity as a consequence. Thus, in contrast to previous results for spheres, the qualitative difference in the single particle regime does not result in a qualitatively different behavior of the many-particle cases. In addition, we have carried out an analysis of pairwise interactions of particles in the well-known drafting-kissing-tumbling setup, for oblate spheroids of aspect ratio 1.5 and for spheres. We have varied systematically the relative initial position between the particle pair and we have considered free-to-rotate particles and rotationally-locked ones. We have found that the region of attraction for both particle shapes, with and without rotation, is very similar. However, significant differences occur during the drafting and tumbling phases. In particular, free-to-rotate spheres present longer drafting phases and separate quickly after the collision. Spheroids remain close to each other for longer times after the collision, and free-to-rotate ones experience two or more collision events. Therefore, we have observed a shape-induced increase in the interaction which might explain the increased tendency to cluster of the many-particle cases.
- 1 January 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 59 (1) , 65-74
Three-Dimensional Effects on Plunging Airfoils at Low Reynolds Numbers
We present two-dimensional and three-dimensional (3-D) direct numerical simulations of large-amplitude plunging maneuvers at Reynolds numbers of and 5000, with velocity ratios of , 1, and 2. For all cases, the evolution of the force coefficients is qualitatively similar. The lift coefficient presents a pronounced peak toward the end of the acceleration phase of the maneuver, a local minimum in the deceleration phase, and a second peak at the end of the maneuver. The amplitude of the main peak increases linearly with , with limited effect of the Reynolds number and a negligible effect of the three-dimensionality of the flow. On the other hand, both the Reynolds number and three-dimensionality have a stronger effect on the amplitude of the maximum value of the lift coefficient at the end of the maneuver, as well as on the subsequent transient decay toward the static values. The comparison of the evolution of the flow structures near the airfoil shows that these differences in the force coefficients are due to subtle interactions between the various vortices generated during the maneuver, as well as to the development of a 3-D boundary layer on the suction side of the airfoil triggered by the instability of the trailing-edge vortices.- 1 January 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 59 (1) , 65-74
Three-Dimensional Effects on Plunging Airfoils at Low Reynolds Numbers
We present two-dimensional and three-dimensional (3-D) direct numerical simulations of large-amplitude plunging maneuvers at Reynolds numbers of and 5000, with velocity ratios of , 1, and 2. For all cases, the evolution of the force coefficients is qualitatively similar. The lift coefficient presents a pronounced peak toward the end of the acceleration phase of the maneuver, a local minimum in the deceleration phase, and a second peak at the end of the maneuver. The amplitude of the main peak increases linearly with , with limited effect of the Reynolds number and a negligible effect of the three-dimensionality of the flow. On the other hand, both the Reynolds number and three-dimensionality have a stronger effect on the amplitude of the maximum value of the lift coefficient at the end of the maneuver, as well as on the subsequent transient decay toward the static values. The comparison of the evolution of the flow structures near the airfoil shows that these differences in the force coefficients are due to subtle interactions between the various vortices generated during the maneuver, as well as to the development of a 3-D boundary layer on the suction side of the airfoil triggered by the instability of the trailing-edge vortices.- Open Access
- 19 August 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 234 (2) , 428-444
Assessing aerodynamic force estimation with experiments and simulations of flapping-airfoil flows on the verge of three-dimensionality
This paper reports a combined experimental and numerical study of the flow over a rigid airfoil in flapping motion. The setup consists of a heaving and pitching airfoil at a moderate Reynolds number ( ), at a Strouhal number St = 0.1. The aim is to assess the accuracy of two-dimensional direct numerical simulations in predicting aerodynamic forces in a flow configuration, which is nominally two-dimensional but is at the verge of three-dimensionality. The assessment is carried out with experiments, including flow field and aerodynamic force measurements with particle image velocimetry and a load cell. The comparative study shows a good qualitative agreement between the experiments and the simulations at comparable Reynolds numbers both in terms of forces and flow fields, but with some quantitative differences. The quantitative discrepancies between experiments and simulation are analyzed and reduced to inherent differences between experimental and computational setups. It is observed that the significant differences are apparent almost exclusively in the wake evolution. Nonetheless, this is shown to have a minor effect on the aerodynamic force estimation. Overall, the trends observed when varying the mean pitch angle and the pitching amplitude are the same in both experiments and simulations. This suggests that two-dimensional/three-dimensional effects do not alter significantly the relationship between the unsteady flow mechanisms (i.e. leading edge vortex) and the aerodynamic forces in the parametric range considered here.- 19 August 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 234 (2) , 428-444
Open AccessAssessing aerodynamic force estimation with experiments and simulations of flapping-airfoil flows on the verge of three-dimensionality
This paper reports a combined experimental and numerical study of the flow over a rigid airfoil in flapping motion. The setup consists of a heaving and pitching airfoil at a moderate Reynolds number ( ), at a Strouhal number St = 0.1. The aim is to assess the accuracy of two-dimensional direct numerical simulations in predicting aerodynamic forces in a flow configuration, which is nominally two-dimensional but is at the verge of three-dimensionality. The assessment is carried out with experiments, including flow field and aerodynamic force measurements with particle image velocimetry and a load cell. The comparative study shows a good qualitative agreement between the experiments and the simulations at comparable Reynolds numbers both in terms of forces and flow fields, but with some quantitative differences. The quantitative discrepancies between experiments and simulation are analyzed and reduced to inherent differences between experimental and computational setups. It is observed that the significant differences are apparent almost exclusively in the wake evolution. Nonetheless, this is shown to have a minor effect on the aerodynamic force estimation. Overall, the trends observed when varying the mean pitch angle and the pitching amplitude are the same in both experiments and simulations. This suggests that two-dimensional/three-dimensional effects do not alter significantly the relationship between the unsteady flow mechanisms (i.e. leading edge vortex) and the aerodynamic forces in the parametric range considered here. - 2 February 2019
- Published by Springer Nature
- p. 411-416
The Influence of the Reynolds Number on the Auto-Rotation of Samaras
- 2 February 2019
- Published by Springer Nature
- p. 411-416
The Influence of the Reynolds Number on the Auto-Rotation of Samaras
- 6 January 2019
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Fast transverse maneuvers at low Reynolds numbers
- 6 January 2019
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Fast transverse maneuvers at low Reynolds numbers