Palaniraj Saravanakumar
Research Subjects
Palaniraj Saravanakumar has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Govindasamy Dhinakaran
Professor, School of Civil Engineering, Sastra University, Thanjavur, India
2 shared publications- Govindasamy Dhinakaran
Sastra University
2 shared publications B. Manoj
1 shared publicationD. Manoj
Assistant Professor, Department of Civil Engineering, Kamala Institute of Technology and Science, Telangana, 505468 (India)
1 shared publication- Gunarani Gunaseelan Indrani
School of Civil Engineering, SASTRA Deemed University, Thirumalaisamudram, Thanjavur 613401, Tamil Nadu, India
1 shared publication - Jagan Sivamani
Faculty, Department of Civil Engineering, Sona College of Technology, Salem, India
1 shared publication
Latest Publications
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (4)
Enhancing concrete performance through iron slag substitution: analysis of mechanical, durability and microstructural studies
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (4)
Open AccessEnhancing concrete performance through iron slag substitution: analysis of mechanical, durability and microstructural studies
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (4) , e20240422
Optimizing concrete strength with tapioca peel ash: a central composite design approach
Tapioca Peel Ash (TPA), a plentiful agricultural residue, demonstrates potential as a Supplementary Cementitious Material (SCM) in concrete. This research intends to maximize the efficiency of TPA integration through the Central Composite Design (CCD) approach to ascertain the optimal mix of components for enhanced performance. The physicochemical analysis assessed TPA’s pozzolanic properties. Laboratory tests analyzed the compressive and flexural strengths of concrete mixes containing various amounts of TPA, cement, and aggregates. The outcomes showed that a mixture ratio of 0.2:0.0875:0.3625:0.4625 (Cement : TPA : Fine Aggregate : Coarse Aggregate) achieved an ultimate compressive strength of 27.08 MPa. Moreover, a ratio of 0.2:0.0875:0.3625:0.525 yielded a maximum flexural strength of 9.84 MPa. Quadratic predictive models and statistical analyses were derived to determine the ideal concrete mixture that substantially improves compressive and flexural strengths. Validation via student’s t-test showed a significant correlation between experimental and simulated values, with p-values of 0.9987 and 0.9912 for compressive and flexural strengths, respectively. This research highlights the opportunity to improve concrete properties and minimize waste by effectively using TPA in construction.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (4) , e20240422
Open AccessOptimizing concrete strength with tapioca peel ash: a central composite design approach
Tapioca Peel Ash (TPA), a plentiful agricultural residue, demonstrates potential as a Supplementary Cementitious Material (SCM) in concrete. This research intends to maximize the efficiency of TPA integration through the Central Composite Design (CCD) approach to ascertain the optimal mix of components for enhanced performance. The physicochemical analysis assessed TPA’s pozzolanic properties. Laboratory tests analyzed the compressive and flexural strengths of concrete mixes containing various amounts of TPA, cement, and aggregates. The outcomes showed that a mixture ratio of 0.2:0.0875:0.3625:0.4625 (Cement : TPA : Fine Aggregate : Coarse Aggregate) achieved an ultimate compressive strength of 27.08 MPa. Moreover, a ratio of 0.2:0.0875:0.3625:0.525 yielded a maximum flexural strength of 9.84 MPa. Quadratic predictive models and statistical analyses were derived to determine the ideal concrete mixture that substantially improves compressive and flexural strengths. Validation via student’s t-test showed a significant correlation between experimental and simulated values, with p-values of 0.9987 and 0.9912 for compressive and flexural strengths, respectively. This research highlights the opportunity to improve concrete properties and minimize waste by effectively using TPA in construction.
- Open Access
- 1 August 2021
- Published by Pontificia Universidad Catolica de Chile in Revista de la construcción
- Vol. 20 (2) , 249-258
Properties of concrete having treated recycled coarse aggregate and slag
The possibility of using substitute materials for aggregates and cement in concrete were studied and reported in this paper. Concrete mixtures with untreated recycled coarse aggregates (URCA) and treated recycled coarse aggregates (TRCA) were used to prepare two mix groups of without slag (Mix I) and with slag (Mix II). The recycled aggregates were treated with hydrochloric acid (HCl) having different molarities (0.1M, 0.3M and 0.5M) before used as a substitute material for virgin aggregate in concrete. The concrete mechanical, durability properties and morphology of concrete were examined through standard experiments and analysed. In both mix groups considerable improvement in all characteristics were identified in TRCA mixes than URCA mixes. Among the two mix groups the concrete mix with slag (Mix II) showed better durability characteristics than mix without slag (Mix I). The combination of TRCA and slag in concrete substantially increases the characteristics of concrete in all means.
- 1 August 2021
- Published by Pontificia Universidad Catolica de Chile in Revista de la construcción
- Vol. 20 (2) , 249-258
Open AccessProperties of concrete having treated recycled coarse aggregate and slag
The possibility of using substitute materials for aggregates and cement in concrete were studied and reported in this paper. Concrete mixtures with untreated recycled coarse aggregates (URCA) and treated recycled coarse aggregates (TRCA) were used to prepare two mix groups of without slag (Mix I) and with slag (Mix II). The recycled aggregates were treated with hydrochloric acid (HCl) having different molarities (0.1M, 0.3M and 0.5M) before used as a substitute material for virgin aggregate in concrete. The concrete mechanical, durability properties and morphology of concrete were examined through standard experiments and analysed. In both mix groups considerable improvement in all characteristics were identified in TRCA mixes than URCA mixes. Among the two mix groups the concrete mix with slag (Mix II) showed better durability characteristics than mix without slag (Mix I). The combination of TRCA and slag in concrete substantially increases the characteristics of concrete in all means.
- 15 February 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 45, 6818-6821
An experimental study on hybrid fiber reinforced concrete beams subjected to torsion
- 15 February 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 45, 6818-6821
An experimental study on hybrid fiber reinforced concrete beams subjected to torsion
- Open Access
- 1 June 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 872 (1)
Behaviour of alkali activated concrete under marine conditions
This study aims to investigate the mechanical and durability behavior of flyash and slag based alkali activated concrete mixes under marine conditions. To fulfil the aim of this study, various tests such as Compressive Strength test, Sorptivity test, Half Cell Potential test and Alkalinity tests were done on both flyash and slag based alkali activated concrete. The experimental results showed that the alkali activated concrete attains its strength at earlier stages when compared to control concrete and it also has low sorptivity value which influences much indurability under marine conditions. Though it was cured in acidic environment for four weeks the alkali activated concrete samples showed only intermediate risk of corrosion.
- 1 June 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 872 (1)
Open AccessBehaviour of alkali activated concrete under marine conditions
This study aims to investigate the mechanical and durability behavior of flyash and slag based alkali activated concrete mixes under marine conditions. To fulfil the aim of this study, various tests such as Compressive Strength test, Sorptivity test, Half Cell Potential test and Alkalinity tests were done on both flyash and slag based alkali activated concrete. The experimental results showed that the alkali activated concrete attains its strength at earlier stages when compared to control concrete and it also has low sorptivity value which influences much indurability under marine conditions. Though it was cured in acidic environment for four weeks the alkali activated concrete samples showed only intermediate risk of corrosion.
- Open Access
- 1 July 2019
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 12 (25) , 1-4
Applications of Sustainable Materials in Concrete – A Short Review
Background/Objectives: Concrete is an inevitable material in construction industry. The major pollution from construction industry was reported from the production of materials like aggregates and cement. The material scarcity, supply-demand gap and environmental pollution insist the construction industry to find an alternative material for concrete matrix. The prime objective of this study is to review the past and recent research on the utilization of alternative materials in concrete production and its applications in construction industry. Materials and Methods: The abundant availability of recyclable waste materials like Construction and Demolition Wastes (C and DW) and industrial byproducts such as fly ash and slag increased the interest of the researchers towards application of these materials as an alternative source for cement and aggregate materials. Findings: Recycled Aggregate Concrete (RAC) showed less strength performance than normal concrete. To attain the similar strength performance of normal concrete, some modifications in the RAC mix design is required. The durability performance was highly improved with the application of industrial by product materials in concrete. Application/Improvement: This study possibly will help to encourage the consumers and further promote the use of alternative materials for concrete production on a larger scale in civil engineering projects.
- 1 July 2019
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 12 (25) , 1-4
Open AccessApplications of Sustainable Materials in Concrete – A Short Review
Background/Objectives: Concrete is an inevitable material in construction industry. The major pollution from construction industry was reported from the production of materials like aggregates and cement. The material scarcity, supply-demand gap and environmental pollution insist the construction industry to find an alternative material for concrete matrix. The prime objective of this study is to review the past and recent research on the utilization of alternative materials in concrete production and its applications in construction industry. Materials and Methods: The abundant availability of recyclable waste materials like Construction and Demolition Wastes (C and DW) and industrial byproducts such as fly ash and slag increased the interest of the researchers towards application of these materials as an alternative source for cement and aggregate materials. Findings: Recycled Aggregate Concrete (RAC) showed less strength performance than normal concrete. To attain the similar strength performance of normal concrete, some modifications in the RAC mix design is required. The durability performance was highly improved with the application of industrial by product materials in concrete. Application/Improvement: This study possibly will help to encourage the consumers and further promote the use of alternative materials for concrete production on a larger scale in civil engineering projects.
- 25 April 2018
- Published by Science Publishing Corporation in International Journal of Engineering & Technology
- Vol. 7 (2.24) , 370-375
Strength and Durability Studies on Geopolymer Recycled Aggregate Concrete
This paper aims to study the engineering and durability properties of fly ash-based geopolymer recycled aggregate concrete and the results were presented in this paper. The addition of recycled coarse aggregate (RCA) retrieved from construction and demolition(C&D) wastes showed promising function in construction industry as an alternative to natural aggregates. It conserves enormous quantities of natural resources and reduces the space required for the landfill disposal of C&D wastes. In this study an increment of 25% partial replacements by weight of natural aggregates with recycled aggregates in geopolymer concrete up to 100% replacements were studied. The concrete containing virgin aggregate and ordinary Portland cement was consider as control concrete and the results of geopolymer recycled aggregate concrete (GP-RAC) were compared with this. The fresh and mechanical properties of all the above four concrete mixes has been investigated. Results indicated that workability of geopolymer concrete decreases than control concrete and it took more than 24 hours to set. Geo polymer based recycled aggregate concrete exhibits better strength and durability performance than ordinary recycled aggregate concrete.
- 25 April 2018
- Published by Science Publishing Corporation in International Journal of Engineering & Technology
- Vol. 7 (2.24) , 370-375
Strength and Durability Studies on Geopolymer Recycled Aggregate Concrete
This paper aims to study the engineering and durability properties of fly ash-based geopolymer recycled aggregate concrete and the results were presented in this paper. The addition of recycled coarse aggregate (RCA) retrieved from construction and demolition(C&D) wastes showed promising function in construction industry as an alternative to natural aggregates. It conserves enormous quantities of natural resources and reduces the space required for the landfill disposal of C&D wastes. In this study an increment of 25% partial replacements by weight of natural aggregates with recycled aggregates in geopolymer concrete up to 100% replacements were studied. The concrete containing virgin aggregate and ordinary Portland cement was consider as control concrete and the results of geopolymer recycled aggregate concrete (GP-RAC) were compared with this. The fresh and mechanical properties of all the above four concrete mixes has been investigated. Results indicated that workability of geopolymer concrete decreases than control concrete and it took more than 24 hours to set. Geo polymer based recycled aggregate concrete exhibits better strength and durability performance than ordinary recycled aggregate concrete.
- Top Cited Papers
- 1 May 2016
- Published by Elsevier in Construction and Building Materials
- Vol. 111, 611-617
Properties of treated recycled aggregates and its influence on concrete strength characteristics
- 1 May 2016
- Published by Elsevier in Construction and Building Materials
- Vol. 111, 611-617
Top Cited PapersProperties of treated recycled aggregates and its influence on concrete strength characteristics
- 1 February 2014
- Published by Science Alert in Asian Journal of Applied Sciences
- Vol. 7 (2) , 88-95
Experimental Studies on RC Beams Strengthened with Epoxy and Polymer Grouting
- 1 February 2014
- Published by Science Alert in Asian Journal of Applied Sciences
- Vol. 7 (2) , 88-95
Experimental Studies on RC Beams Strengthened with Epoxy and Polymer Grouting
- 1 February 2014
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 66 (4) , 186-195
Durability aspects of HVFA-based recycled aggregate concrete
The utilisation of recycled coarse aggregate obtained from demolished concrete has gained momentum in recent years due to its contribution towards sustainability by minimising the use of artificially produced materials and eliminating environmental problems due to dumped waste materials. The present research exploited the possibility of producing high-volume fly ash (HVFA)-based recycled aggregate (RA) high-strength concrete. It was found that 50% of desired strength could be achieved even with 50% replacement of cement with fly ash and 50% of natural aggregate (NA) with RA. An attempt was thus made to study the effects of RA and HVFA on durability characteristics. The parameters considered were resistance to chloride ion penetration, acid attack, sulfate attack and sorption. It was found that replacement of NA with RA and cement with fly ash in higher volumes showed a way of considering economy and environmental effects as criteria, given a little bit of compromise towards strength and durability criteria but still falling well within an acceptable limit.
- 1 February 2014
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 66 (4) , 186-195
Durability aspects of HVFA-based recycled aggregate concrete
The utilisation of recycled coarse aggregate obtained from demolished concrete has gained momentum in recent years due to its contribution towards sustainability by minimising the use of artificially produced materials and eliminating environmental problems due to dumped waste materials. The present research exploited the possibility of producing high-volume fly ash (HVFA)-based recycled aggregate (RA) high-strength concrete. It was found that 50% of desired strength could be achieved even with 50% replacement of cement with fly ash and 50% of natural aggregate (NA) with RA. An attempt was thus made to study the effects of RA and HVFA on durability characteristics. The parameters considered were resistance to chloride ion penetration, acid attack, sulfate attack and sorption. It was found that replacement of NA with RA and cement with fly ash in higher volumes showed a way of considering economy and environmental effects as criteria, given a little bit of compromise towards strength and durability criteria but still falling well within an acceptable limit.