ABAndrii Viktorovych Bublikov

Andrii Viktorovych Bublikov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andrii Viktorovych Bublikov has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    SUBSTANTIATION OF THE CONDITIONS OF THE OPTIMUM AUTOMATIC CONTROL OF A STRIPED BELT CONVEYOR BASED ON STATIC PERFORMANCE CHARACTERISTICS

    by Andrii Viktorovych Bublikov, Mariia Shykhakhmedovych Isakova, Bohdan Leonidivna Prodan

    The goal is to reduce the specific energy consumption for coal transportation by a gate belt conveyor by determining the optimal operating modes according to the criterion of minimum specific energy consumption based on the analysis of the static operating characteristics of the conveyor.Method. The study of the dependence of the specific energy consumption for coal transportation on the operating modes of the belt conveyor is carried out using mathematical modeling methods to obtain the operating static characteristics of the conveyor, as well as data analysis methods when determining the conditions for optimal conveyor control based on the obtained static dependencies of the specific energy consumption on the input coal flow and belt speed.Results. A simulation model of the belt conveyor is proposed and the results of research into different operating modes of the 2L80 conveyor in the conditions of the mining area are presented. The possibility of optimal conveyor control within the working zone defined by the values of the disturbing (input load) and control (belt speed) parameters of the conveyor are shown. The criterion for optimal control of a belt conveyor has been formulated. This method of automatic control can be implemented on the basis of a microprocessor controller.Practical significance. The proposed solutions will then be used as a basis for further development of algorithmic support for the optimal control system of a belt track conveyor. The results of the study will allow the control system to identify the degree of energy efficiency of the conveyor due to the violation of the nature of the static dependencies of its parameters - the load on the drive motors, the belt speed and the incoming coal flow. The implementation of the research results at mining enterprises will allow reducing electricity consumption for coal mining, thus reducing its cost.

  • Classification of heating conditions in terms of smart control of indoor heating with the use of uncontrolled electric heaters

    by G Pivnyak, G Gruhler, A Bublikov, Yu Papaika, Ye Voskoboinyk

    Purpose. To reduce specific energy consumption for heating municipal and industrial buildings by introducing smart indoor temperature control taking into consideration individual dependences of characteristics of each person as a consumer of energy resources on specific heating conditions. Methodology. The energy-efficient and smart control of indoor heating is based on the fact that a control system is to elaborate and provide a compromise solution as for comfortable perception of proper conditions of someones staying indoors and minimum consumption of energy resources. To do that, first of all the problem should be solved concerning recognition of different heating conditions by a smart control system aimed at providing a process of system learning and database formation. To complete this task, the parameters of one-dimensional dynamic models describing heat-exchange processes are proposed to be used as the information signs for the classification of situations in terms of heating relative to the uncontrolled electric heaters; the input value is the heater capacity, and the output value is the air temperature within the local indoor zone. Within the framework of the development of a method for classifying indoor heating conditions, dependences of the parameters of dynamic models of local indoor heating zones on the characteristics of local heating zones were analysed. Besides, certain regularities of a control process for heaters were determined; that helped provide accurate identification of the models of local heating zones without considerable changes in a preset temperature mode. Computational experiments made it possible to evaluate the accuracy of determination of information signs for the classification of heating conditions while representing real characteristics of indoor heat-exchange processes. Findings. The studies resulted in the development of a method for identifying dynamic properties of indoor heat zones for the cases of using uncontrolled electric heaters with two states. Originality. For the first time, certain regularities have been identified concerning a capacity control process for electric heaters with two states and a process of temperature measurement within the local indoor zones. The regularities made it possible to determine the parameters of dynamic models of indoor heat-exchange processes with high accuracy and without considerable changes in the preset temperature mode, and to use these parameters as information signs while classifying the heating conditions. Practical value. The obtained regularities of the processes of heater control and temperature measurement allowed developing a method for identification of dynamic properties of local indoor heat zones, which makes up the basis for a classification procedure of heating conditions.

  • Automation of the coordinated road traffic control process

    by D Orazbayeva, A Abzhapbarova, D Agabekova, A Bublikov, I Taran

    Purpose. To increase output of traffic network while deriving new dependencies of transport flow characteristics upon control law parameters and using them to develop an algorithm to automate a process of the transport flow coordinated regulation within towns and cities. Methodology. The aggregated simulation model, describing processes of road traffic formation within a local section of urban traffic system, is used for the analysis of dependencies to assess quality of transport flow control upon correcting conditions being parameters of traffic cycles within intersections. The abovementioned should involve a PID controller as well as a negative feedback idea to automate control of the road traffic process. In this context, control criterion is applied to determine critical flow intensity if a traffic jam occurs. The criterion makes it possible to identify changes in the road traffic nature. To determine the optimal settings of the PID controller for different stocks of the stability control system, the standard deviation of the controlled variable from the set value and the mean static control error are defined. The derived dependencies of control quality criteria upon a law of flow regulation have helped develop a new algorithm of the coordinated automated road traffic control within a local section of urban traffic section using standard control action. Simulation experiments made it possible to assess efficiency of the proposed algorithm of control compared with available ones applied in terms of different road conditions. Findings. As a part of the studies, algorithm of the coordinated automated road traffic has been developed. It helps support maximum output of road systems while monitoring changes in the traffic environment characteristics. Originality. For the first time, dependencies of assessment criteria of traffic flow control upon the parameters of a law of flow intensity regulation have been identified if maximum output of road systems is provided. The dependencies have helped substantiate optimum control criteria for different road conditions while automating a process of coordinated traffic flow regulation within local section of urban traffic network. Practical value. The proposed dependencies of assessment criteria of traffic flow control upon the parameters of a law of flow intensity regulation as well as the algorithm of automated coordinated control are the theoretical foundations to solve such an important applied scientific problem as automation of a process of urban traffic flow regulation.

  • Open Access

    Problems of electromagnetic compatibility of powerful energy associations during mass connection of renewable energy sources

    by Yu.A. Papaika, O.G. Lysenko, A.V. Bublikov, I.G. Olishevskiy

    Purpose. Analysis of the problem of energy efficiency and electromagnetic compatibility of powerful energy associations with nonlinear loads and renewable energy sources. Finding promising ways to increase energy efficiency of power supply systems. Methodology. Mathematical modeling of electromagnetic compatibility. Findings. The analysis of the problem of energy efficiency and electromagnetic compatibility of powerful energy associations with nonlinear loads and renewable energy sources allows us to formulate the following provisions that determine the objectives of this study. A promising way to increase the energy efficiency of power supply systems is the introduction of refined methods of analysis and forecasting of electrical modes of industrial enterprises, as well as indicators of voltage quality and reliability of electrical equipment. Originality. Although the problem of electromagnetic compatibility has been the subject of numerous domestic and foreign studies, it should be noted that most of these works consider the processes of generating electromagnetic interference in the electrical network without reference to the technological schedules of electrical equipment. Practical value. One of the electromagnetic effects, which is manifested in the operation of frequency converters, are significant levels of interharmonics and higher harmonics, which are generated in the electrical network and contribute to the growth of electricity losses and reduce the service life of electrical equipment. However, the regularities connecting the parameters of the power system and the modes of powerful industrial converters have not been studied, and the substantiation of the parameters of a rational energy efficient mode of the power supply system, taking into account individual graphs of higher harmonics, has not been carried out until today.


  • Open Access

    Automatic control of jet grinding on the basis of acoustic monitoring of mill operating zones

    by A.V Bublikov, P.I Pilov, N.S Pryadko, Yu.A Papaika, K.V. Ternova

    New+Solid State Physics, Mineral Processing +https://doi.org/10.33271/nvngu/2021-4 +/jdownloads/pdf/2021/4/04_2021_contents-en-GB.pdf


  • Automation of the control process by the shearer drum in terms of coal seam hypsometry

    by A.V Bublikov, V.V Tkachov, D.L Kolosov, G Gruhler, M.I Stadnik

    Purpose. To develop a method for synthesizing a fuzzy automatic control system for a shearer drum in terms of coal seam hypsometry basing on the information criterion of the beginning of rock cutting-off by the drum to reduce ash content of the extracted coal. Methodology. Taking into consideration peculiarities of determining a distinct information criterion of the beginning of rock cutting-off by the drum and regularities of its variations during the shearer operation, a fuzzy inference algorithm is developed for a system of fuzzy automatic drum control in terms of seam hypsometry. In this context, rules of fuzzy productions, parameters of the membership functions of terms of the output linguistic variable system, and fuzzy operations are substantiated according to the recommendations of a classic Mamdani fuzzy inference algorithm. Studies are carried out to analyze the efficiency of the proposed fuzzy inference algorithm basing on the introduced relative parameter of the number of effective control actions formed by the fuzzy control system. Simulation modeling makes it possible to perform comparative analysis of the efficiency of the drum control. Findings. In the course of research, an algorithm of fuzzy control of the shearers upper drum in terms of coal seam hypsometry has been developed basing on the determination of direct and inverse transfer from coal breaking near the seam roof by the shearer drum to rock breaking with the help of statistical analysis of the stator power of a cutting drive motor. Originality. For the first time, a method of synthesis of fuzzy automatic control of the drum in terms of seam hypsometry has been proposed. Practical value. The proposed method is the theoretical basis to solve important scientific and applied problem of the automation of the coal shearer drum in terms of seam hypsometry to reduce ash content of the produced coal.

  • Open Access

    Automatic control of the coal mining drainage installation taking into account the trison tariff for electricity

    by A Bublikov, K Sosnin, Yu Papaika

    Justificationof options of ecological protection of mine field areas in conditions of groundwater level recovery I. Sadovenko, A. Zahrytsenko, N. Dereviahina

  • Open Access

    Development of the algorithm for the automated synchronization of energy consumption by electric heaters under condition of limited energy resource

    by Viktor Tkachov, Gerhard Gruhler, Alexander Zaslavski, Andrey Bublikov, Stanislav Protsenko

    A special feature of the proposed algorithm that automatically synchronizes operation of electric heaters is to divide the heaters into prioritized and non-prioritized ones, with subsequent synchronization of operation of the prioritized heaters in time so that the non-prioritized heaters would receive the maximum amount of excessive electric resource. The first condition for the prioritized heaters is the predictability of their modes of operation, when it is possible to predict the times of their turning on and off and to apply this information in order to synchronize operation of the heaters. The second condition is the maximal utilization of the proposed electric resource under condition of simultaneous connection of all prioritized heaters. The synchronization of operation of the prioritized heaters in time is based on two rules – in case among the non-prioritized heaters there are more heaters with a greater capacity, the prioritized heaters combine their work so that at moments of their simultaneous shutdown they would offer a resource to more powerful non-prioritized heaters. And when among the non-prioritized heaters there are more heaters with a less capacity, the prioritized heaters distribute their operation in time in order to constantly offer the resource to less powerful non-prioritized heaters. Such a coordinated work of prioritized and non-prioritized heaters in time makes it possible to use, at any time, the proposed electric resource for heating to the fullest. Taking into consideration the amount of electricity used for heating the premises by the algorithm that automatically manages the allocation of power among heaters, as well as control over this parameter, allows the user to find a balance between a comfortable temperature at the premises and the amount of electricity consumed. This in turn is a precondition for the transition to energy efficient electric heating of buildings. The result of study into the patterns of the process of allocation of power among electrical heaters based on the proposed algorithm confirmed effectiveness of the synchronization of operation of heaters at electric heating at premises. It was established that the duration of synchronization of heaters in time is between 1 to 2 minutes. Therefore, the procedure of change in the optimal combination of prioritized heaters and the synchronization of their operation makes sense only when the period over which other household appliances are connected to the grid exceeds 4 minutes. We also confirmed the possibility to control temperature regimes at premises by changing the limit of power for electric heating. It was established that when changing conditions of heating or power consumption, the period for the adjustment of thermal modes in heated zones due to a change in the power limit is 15‒20 minutes. The proposed algorithm that automatically synchronizes power consumption by electric heaters could be used in order to improve existing systems that manage energy supply in a house. As an additional feature of modern systems, it would allow private users to directly participate in the management of power consumption in their house in order to save electricity.


  • Self-organizing intelligent network of smart electrical heating devices as an alternative to traditional ways of heating

    by Aleksander M. Zaslavsky, Viktor V. Tkachov, Stanislav M. Protsenko, Andrii V. Bublikov, Batyrbek Suleimenov, Nurbek Orshubekov, Konrad Gromaszek