Toru Obara
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Toru Obara has a total of 100 co-authors. Here are the top co-authors by number of shared publications:
Hiroshi Sekimoto
18 shared publicationsJun Nishiyama
Laboratory for Advanced Nuclear Energy, Institute of Innovative Research, Tokyo Institute of Technology, Japan
16 shared publications- Hiroki Takezawa
Tokyo City University, Department of Nuclear Safety Engineering, Faculty of Engineering, Tokyo, Japan
10 shared publications - Jun Nishiyama
Tokyo Institute of Technology
9 shared publications - Delgersaikhan Tuya
Nuclear Science and Engineering Center, Japan Atomic Energy Agency, Tokai-mura, Naka-gun, Ibaraki 319-1195, Japan
7 shared publications Terumitsu Miura
7 shared publications
Latest Publications
- Open Access
- 6 August 2026
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 59 (1)
Fuel cycle features of RFBB fast reactor with silicide fuel and lead coolant
- 6 August 2026
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 59 (1)
Open AccessFuel cycle features of RFBB fast reactor with silicide fuel and lead coolant
- Open Access
- 31 May 2025
- Published by Elsevier in Progress in Nuclear Energy
- Vol. 187
Concept of Lead-Bismuth Eutectic cooled Rotational Fuel-shuffling Breed-and-Burn Fast Reactor Using Metallic Fuel
- 31 May 2025
- Published by Elsevier in Progress in Nuclear Energy
- Vol. 187
Open AccessConcept of Lead-Bismuth Eutectic cooled Rotational Fuel-shuffling Breed-and-Burn Fast Reactor Using Metallic Fuel
- Open Access
- 29 March 2025
- Published by Elsevier in Annals of Nuclear Energy
- Vol. 218
Development of a start-up core for sustaining rotational fuel shuffling strategy for a nitride fueled lead-cooled fast reactor
- 29 March 2025
- Published by Elsevier in Annals of Nuclear Energy
- Vol. 218
Open AccessDevelopment of a start-up core for sustaining rotational fuel shuffling strategy for a nitride fueled lead-cooled fast reactor
- 22 July 2024
- Published by Taylor & Francis in Nuclear Technology
- Vol. 211 (5) , 963-973
Neutronics–Thermal-Hydraulics–Coupled Transient Analysis for Reactor Power Change in an Inclined Offshore Floating Boiling Water Reactor
- 22 July 2024
- Published by Taylor & Francis in Nuclear Technology
- Vol. 211 (5) , 963-973
Neutronics–Thermal-Hydraulics–Coupled Transient Analysis for Reactor Power Change in an Inclined Offshore Floating Boiling Water Reactor
- Open Access
- 20 May 2024
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 199 (2) , 266-279
Practical Design of a Breed-and-Burn Lead-Cooled Fast Reactor with Rotational Fuel Shuffling Strategy
- 20 May 2024
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 199 (2) , 266-279
Open AccessPractical Design of a Breed-and-Burn Lead-Cooled Fast Reactor with Rotational Fuel Shuffling Strategy
- Open Access
- 18 November 2022
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 197 (4) , 711-718
Core Concept of Small Rotational Fuel-Shuffling Breed-and-Burn Fast Reactor with Nitride Fuel and Sodium Coolant
The purpose of this study is to clarify the possibility of designing a small rotational fuel-shuffling breed-and-burn fast reactor (RFBB) with nitride fuel and sodium coolant based on neutronic and heat removal analyses. In these reactor analyses, uranium nitride fuel with a helium bond and sodium coolant was applied to the RFBB, whose thermal power is 450 MW. The structural and cladding materials are oxide dispersion-strengthened ferritic steel. Calculation results showed that the core with rotational fuel shuffling achieved an equilibrium state at criticality near unity, and the average discharge burnup of discharged fuel was 187 MWd/kg heavy metal. In this equilibrium state, reactor characteristics, such as neutron flux and the power profile, were almost stable, and the maximum displacements-per-atom value was slightly higher than 650. A steady-state heat removal analysis was performed for the hottest channel in the core, revealing that the fuel temperature was lower than the operational limit temperature and that the cladding temperature was lower than its melting temperature. However, it was slightly higher than the suggested value of 600°C for retaining nitride fuel integrity for high burnup. It was shown that the core radius could be smaller than that of the metal-fueled core of the previous study.
- 18 November 2022
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 197 (4) , 711-718
Open AccessCore Concept of Small Rotational Fuel-Shuffling Breed-and-Burn Fast Reactor with Nitride Fuel and Sodium Coolant
The purpose of this study is to clarify the possibility of designing a small rotational fuel-shuffling breed-and-burn fast reactor (RFBB) with nitride fuel and sodium coolant based on neutronic and heat removal analyses. In these reactor analyses, uranium nitride fuel with a helium bond and sodium coolant was applied to the RFBB, whose thermal power is 450 MW. The structural and cladding materials are oxide dispersion-strengthened ferritic steel. Calculation results showed that the core with rotational fuel shuffling achieved an equilibrium state at criticality near unity, and the average discharge burnup of discharged fuel was 187 MWd/kg heavy metal. In this equilibrium state, reactor characteristics, such as neutron flux and the power profile, were almost stable, and the maximum displacements-per-atom value was slightly higher than 650. A steady-state heat removal analysis was performed for the hottest channel in the core, revealing that the fuel temperature was lower than the operational limit temperature and that the cladding temperature was lower than its melting temperature. However, it was slightly higher than the suggested value of 600°C for retaining nitride fuel integrity for high burnup. It was shown that the core radius could be smaller than that of the metal-fueled core of the previous study.
- Open Access
- 18 October 2021
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 59 (4) , 438-445
Granular fuel debris shape modeling in MPS-DEM for the simulation of fuel debris bed formation in water
During the decommissioning of the Fukushima Daiichi Nuclear Power Station, it is vital to ensure that work stays safely under the subcriticality state in order to protect workers and the public from a criticality accident. To improve criticality evaluation accuracy, this study was performed to clarify whether the effect of fuel debris shape can be modeled by adjusting the friction coefficient in an MPS-DEM simulation of fuel debris behavior in water. The results showed it was possible to efficiently adjust the friction coefficients to model the shape effect in underwater conditions. Then, from the validation of the adjusted friction coefficients, we clarified that this method can be applied under conditions where the interaction between the fine grain fuel debris is dominant. On the other hand, further research is needed when this model is applied where water flow is dominant.
- 18 October 2021
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 59 (4) , 438-445
Open AccessGranular fuel debris shape modeling in MPS-DEM for the simulation of fuel debris bed formation in water
During the decommissioning of the Fukushima Daiichi Nuclear Power Station, it is vital to ensure that work stays safely under the subcriticality state in order to protect workers and the public from a criticality accident. To improve criticality evaluation accuracy, this study was performed to clarify whether the effect of fuel debris shape can be modeled by adjusting the friction coefficient in an MPS-DEM simulation of fuel debris behavior in water. The results showed it was possible to efficiently adjust the friction coefficients to model the shape effect in underwater conditions. Then, from the validation of the adjusted friction coefficients, we clarified that this method can be applied under conditions where the interaction between the fine grain fuel debris is dominant. On the other hand, further research is needed when this model is applied where water flow is dominant.
- Open Access
- 4 October 2021
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 196 (3) , 322-341
Neutron Balance Features in Breed-and-Burn Fast Reactors
Since nuclear power plants were first developed over 80 years ago, most have had thermal reactors with enriched uranium as the main fuel. As a result, huge amounts of depleted uranium must be stockpiled and stored. Fast reactors operating in breed-and-burn (B&B) conditions are one potential approach to reducing the need for storage facilities to hold spent nuclear fuel and maximize the effective use of uranium resources. Sustaining B&B operating conditions depends on the choice of core materials. Here, we perform neutron balance analyses to determine the best combination of fuel and coolant material. We identify the features of the reactor core needed to maintain B&B operating mode by the amount of neutron loss from the core and coolant heat removal capability. Finally, we demonstrate that a large or small sodium-cooled fast reactor core with metallic or enriched nitride fuel, respectively, can sustain the chain reaction and B&B operation mode.
- 4 October 2021
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 196 (3) , 322-341
Open AccessNeutron Balance Features in Breed-and-Burn Fast Reactors
Since nuclear power plants were first developed over 80 years ago, most have had thermal reactors with enriched uranium as the main fuel. As a result, huge amounts of depleted uranium must be stockpiled and stored. Fast reactors operating in breed-and-burn (B&B) conditions are one potential approach to reducing the need for storage facilities to hold spent nuclear fuel and maximize the effective use of uranium resources. Sustaining B&B operating conditions depends on the choice of core materials. Here, we perform neutron balance analyses to determine the best combination of fuel and coolant material. We identify the features of the reactor core needed to maintain B&B operating mode by the amount of neutron loss from the core and coolant heat removal capability. Finally, we demonstrate that a large or small sodium-cooled fast reactor core with metallic or enriched nitride fuel, respectively, can sustain the chain reaction and B&B operation mode.
- 17 August 2021
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 59 (1) , 34-43
Monte Carlo codes benchmarking on sub-critical fuel debris particles system for neutronic analysis
Fuel debris removal is the most challenging part of damaged nuclear power station decommissioning. It is important to carry out nuclear safety calculations accurately and quickly enough. Here, it was clarified that modern codes based on the Monte Carlo method were capable of performing neutronic analysis with the same accuracy and without significant differences in the results. The benchmark calculations were performed using three codes: MVP, Serpent, and MCU. In this study, the comparison focused on multiplication factor, neutron fluxes and reaction rates relative difference, and calculation time of many fuel debris particles system. Then the calculation results were used when codes comparing. It was shown that the calculation results showed good agreement between all codes. It was assumed that minor differences in the thermal range of neutron fluxes can be caused by different thermal neutrons scattering treatment for all codes. The study also showed that solving such problems requires significant computing power and time. It has been proven that the statistical geometry model in the MVP and the explicit stochastic geometry model in the Serpent have the possibility to provide solutions with the same accuracy, but much faster.
- 17 August 2021
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 59 (1) , 34-43
Monte Carlo codes benchmarking on sub-critical fuel debris particles system for neutronic analysis
Fuel debris removal is the most challenging part of damaged nuclear power station decommissioning. It is important to carry out nuclear safety calculations accurately and quickly enough. Here, it was clarified that modern codes based on the Monte Carlo method were capable of performing neutronic analysis with the same accuracy and without significant differences in the results. The benchmark calculations were performed using three codes: MVP, Serpent, and MCU. In this study, the comparison focused on multiplication factor, neutron fluxes and reaction rates relative difference, and calculation time of many fuel debris particles system. Then the calculation results were used when codes comparing. It was shown that the calculation results showed good agreement between all codes. It was assumed that minor differences in the thermal range of neutron fluxes can be caused by different thermal neutrons scattering treatment for all codes. The study also showed that solving such problems requires significant computing power and time. It has been proven that the statistical geometry model in the MVP and the explicit stochastic geometry model in the Serpent have the possibility to provide solutions with the same accuracy, but much faster.
- Open Access
- 29 July 2021
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 196 (1) , 109-120
Feasibility of Sodium-Cooled Breed-and-Burn Reactor with Rotational Fuel Shuffling
The objective of the present study is to show that it is feasible to establish the breed-and-burn (B&B) mode of operation with rotational fuel shuffling in the S-PRISM core based on neutronic and thermal-hydraulic analyses. The results quantified the impact of major core design choices on the criticality of a core that uses sodium as a coolant material and HT9 steel as structural material. The design variables examined include the binary metallic fuel U-Zr with different weight percentages of zirconium as well as different core heights and fuel rod pitch-to-diameter ratios (P/Ds) in the fuel assembly. We found that a core using the binary metallic fuel U-Zr with 2 wt% zirconium, with a core height of 200 cm, a P/D of 1.086, and a core power of 400 MW(thermal), could overcome some major design constraints. It was also found that with shuffling intervals of 1125 to 1250 days, the core with rotational fuel shuffling was critical in the equilibrium state, and the possible average discharged burnup was from 274.8 to 305.3 GWd/ton HM. Reactor characteristics such as neutron flux and power profile were almost stable during the equilibrium cycle. A steady-state thermal-hydraulic analysis was performed for the hottest channel in the core. It revealed that both the fuel and cladding maximum temperatures were less than the melting point of the fuel and the chemical interaction temperature of the HT-9, respectively. The mixed coolant outlet temperature was somewhat below the temperature usually observed in sodium-cooled fast reactors. Thus, it appears that the S-PRISM can be principally designed to have a B&B core.
- 29 July 2021
- Published by Taylor & Francis in Nuclear Science and Engineering
- Vol. 196 (1) , 109-120
Open AccessFeasibility of Sodium-Cooled Breed-and-Burn Reactor with Rotational Fuel Shuffling
The objective of the present study is to show that it is feasible to establish the breed-and-burn (B&B) mode of operation with rotational fuel shuffling in the S-PRISM core based on neutronic and thermal-hydraulic analyses. The results quantified the impact of major core design choices on the criticality of a core that uses sodium as a coolant material and HT9 steel as structural material. The design variables examined include the binary metallic fuel U-Zr with different weight percentages of zirconium as well as different core heights and fuel rod pitch-to-diameter ratios (P/Ds) in the fuel assembly. We found that a core using the binary metallic fuel U-Zr with 2 wt% zirconium, with a core height of 200 cm, a P/D of 1.086, and a core power of 400 MW(thermal), could overcome some major design constraints. It was also found that with shuffling intervals of 1125 to 1250 days, the core with rotational fuel shuffling was critical in the equilibrium state, and the possible average discharged burnup was from 274.8 to 305.3 GWd/ton HM. Reactor characteristics such as neutron flux and power profile were almost stable during the equilibrium cycle. A steady-state thermal-hydraulic analysis was performed for the hottest channel in the core. It revealed that both the fuel and cladding maximum temperatures were less than the melting point of the fuel and the chemical interaction temperature of the HT-9, respectively. The mixed coolant outlet temperature was somewhat below the temperature usually observed in sodium-cooled fast reactors. Thus, it appears that the S-PRISM can be principally designed to have a B&B core.