Indhumathi Kulandhaisamy has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Design of a transparent, flexible RF membrane antenna for WBAN applications using polydimethylsiloxane (PDMS)

    by V. Nisha Priyadharsini, Indhumathi Kulandhaisamy, Islavath Balakrishna

    In this work, a flexible antenna as an Radio Frequency (RF) sensor is presented, which is used in Wireless Body Area Network communications. For on-body and off-body communications, the antenna elements have directional and quasi-omnidirectional patterns. This antenna is transparent, made from a polydimethylsiloxane (PDMS) substrate, which is well-known for its flexibility, with copper as its conducting element. The proposed design uses a PDMS substrate with a loss tangent tan δ of 0.02 and a dielectric constant ε r of 2.65. The overall size of a compact antenna is 36.98 × 29.8 × 1 mm, which provides a wide impedance bandwidth that covers the wideband spectrum. Using slots and stubs, antennas were modified as a simple geometrical configuration to achieve a flexible and compact antenna size. The presented design is simulated by CST Microwave Studio with a range of operating frequencies from 3.26 to 4.62 GHz, a bandwidth of 1.36 GHz, and a gain of 2.42 dBi in its planar form. This achieves the required compactness, backward radiation, minimization loss, and targeted frequency bands for frequency notch characteristics used in the human body of proximity.

  • Open Access

    Millimetre wave antenna for biomedical applications-a review

    by Nadar Akila P Mohan, K Indhumathi

    Terahertz represents the portion of electromagnetic wave between the microwave and IR region. Recent research has been focused on the application of Terahertz waves in biomedical applications such as cancer detection. The current diagnostic methods in cancer treatment involve imaging to MRI and biopsy. Due to the low photon energy that terahertz possess, there are no health threats caused in contrast to traditional methods. Cancer cells can be detected by monitoring the blood supply to the affected tissues and water level in the local tissues. This can be diagnosed using Terahertz imaging. THz radiation can be generated and detected using various commercialized systems. On analysis of various literatures, it is observed that Meta material antennas will be the suitable candidate to enhance the existing terahertz spectroscopy techniques since it has better focusing capabilities. This paper reviews the various implementation techniques of an antenna in THz range. The design and properties of the antenna are also investigated.


  • Open Access

    Sub-millimeter wave nanoantenna-a review

    by Nadar Akila P Mohan, K Indhumathi

    Electromagnetic waves that have a wavelength of less than one millimeter are referred to as sub millimeter waves. In sub millimeter wave-based devices and systems, antennas are critical components that are vital to their operation. Antennas are used in situations when a transition between a directed wave and a free-space wave is needed. Since, electromagnetic characteristics for receiving and transmission of the nano antenna are mutually invertible, the properties of nano antenna are analyzed in sub millimeter wave frequencies and this overcomes the limitations of conventional antenna design. They are very small in size, provide more efficiency, and do not cause health threat. This paper reviews the applications of nano antenna, which operates at sub-millimeter wave frequency, in the field of energy harvesting, space technology, IoT applications, 5G network, smart clothing, bio sensing, communication, etc? Also, the nano antenna fabricated by 3D printing technology is also reviewed. The world’s ever-increasing energy need necessitates the development of alternate energy sources. There is a lot of research and development going on right now to enhance photovoltaic systems so that they can be more efficient, but the constraint is that they can only collect energy from the visible area of the electromagnetic spectrum. As a result, a novel device known as a Nano antenna has been developed to convert heat energy taken from the infrared spectrum into electricity. In the not-too-distant future, it will have an impact on a wide range of fields, such as mobile communication (5G), radar detection, and higher order frequency applications. Space communication, broadband wireless communications, wireless optical communication, and mobile communication will also benefit from its implementation.


  • Cocos nucifera husk biocarbon and FeSi3 on EMI shielding behavior of PVA composites

    by S. A. Amutha Jeevakumari, R. Ramadoss, Indhumathi K, A. K. Gnanasekar


  • Magnetic Nanoparticle-Based Biosensors for the Sensitive and Selective Detection of Urine Glucose

    by Tousief Irshad Ahmed, Reegan Aruldoss, Bhasker Pant, Indhumathi Kulandhaisamy, R. Raffik, Ganesh Bhaskarrao Sonawane

    In this work, a diagnostic application was performed by utilizing magnetic nanoparticles for the bio-sensing. A novel Fe3O4 nanostructure was synthesized in this paper using a simple hydrothermal method, the Fe3O4 nanoparticles are successfully controlled to provide a more dynamic site for catalytic reaction. FTIR-analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD) was used to examine the morphology of the synthesized nanoparticles. The findings showed that a unique Fe3O4 nanostructure was obtained nanoparticles confined in nanosphere. The relative catalytic kinetics of Fe3O4 nanostructure has followed Michaelis–Menten behaviours, according to an analysis of peroxidase-like activity. An effective approach for colorimetric sensing of glucose was formulated on the bases of efficient peroxidase-mimicking activity of Fe3O4 nanoparticles. The synthesized Fe3O4 nanoparticles are very hopeful for the application of bio-sensors.


  • A Simple Approach of CQDs@MoS2 Nanosheets for Turn-On Fluorescence Sensor for Detection of Pb2+ Ions

    by Anshul Singh, R. Rathinam, Anil Kumar Yadav, Rajkumar Vasudevan, Indhumathi Kulandhaisamy, Malleboina Purushotham, Pandurang Y. Patil

    The 2-Dimennsionnal nanocomposites are applied for the ennhannced fluorescence sensor for analysing heavy metal ions is explored using a simple novel technique based on green manufactured (CQDs@MoS2) nanocomposite. The emission intensity of CQDs have a better dispersibility, and MoS2 nanosheets have an excellent exfoliation, allowing the CQDs to adhere to the surface and form a label-free sensors. The emission peak of CQDs was quenched by transferring non-radiative energy as of CQDs to MoS2 sheets in an excited state. However, when metal ions are included in the CQDs@MoS2 nanocomposite, it develops a solid surface combined with the carbon dots nanosheets, that might aid in CD recovery. More intriguingly, the sensing performance of MoS2 nanosheets were examined at various pH levels to better recognize the change in surface charge, which resulted in significantly improved responsiveness for identification of Pb (II) ions with LODs of 0.9 nM. Furthermore, it is suggested that present method are intended to be quick, easy, cost effective, environmental friendly for sensing heavy metal ions.


  • Detection of Breast Cancer Using Imaging Sensor and Mammogram - A Review

    by Srigitha S. Nath, Anjaline Jayapraba A, K Indhumathi

    Breast cancer killer of women. Mortality can be reduced if disease is early detected. Breast cancer leading the second cancer cause death all over the world. Conventional method of breast cancer detection is various disadvantage it's include high cost, heavy radiation and discomfort to patients. The alternative method to decrease the death rate is microwave imaging technique. The main objective of paper to provide various techniques in microwave imaging and hand held device for breast cancer detection.


  • Bandwidth reconfigurable microwave filter using stepped impedance c-shaped resonator

    by Saffrine Kingsly, Malathi Kanagasabai, Gulam Nabi Alsath Mohammed, Manimekalai Thirunavukkarasu, Sangeetha Subbaraj, Sandeep Kumar Palaniswamy, Sridhar Bilvam, Indhumathi Kulandhaisamy


  • Compact Frequency and Bandwidth Reconfigurable Microwave Filter

    by Saffrine Kingsly, Malathi Kanagasabai, M. Gulam Nabi Alsath, P. Sandeep Kumar, T. Rama Rao, K. Indhumathi, Sangeetha Subbaraj, Yogeshwari Panneer Selvam


  • Role of cobalt nanowire and graphene nanoplatelet on microwave shielding behavior of natural rubber composite in high frequency bands

    by S. A. Amutha Jeevakumari, K. Indhumathi, V. R Arun Prakash

    Highly flexible microwave shielding E (2‐3 GHz), F (3‐4 GHz), I (8‐12 GHz) and J (12‐16 GHz) natural rubber composites for antenna application were prepared and characterized. The main objective of this current research is to develop a flexible microwave shielding material to reduce electromagnetic inference (EMI) effect. Graphene nanoplatelet and cobalt nanowire was selected for improving electric and magnetic losses. The flexible rubber composite was prepared using two‐roll mill process and cured at an temperature of 150οC. The mechanical, dielectric, magnetic, and microwave shielding properties were tested in accordance to ASTM standards. Highest tensile strength of 30 MPa was obtained for composite made of 6phr (parts per hundred rubber) of graphene nanoplatelet and cobalt nanowire (NR4). Dielectric results show that the composite consists of graphene nanoplatelet and cobalt nanowire of 6phr gives highest dielectric constant of 7.2. The hysteresis analysis shows a highest magnetization of 940 emu, remanence of 610 emu and coercivity of 2750G for NR4 composite. Similarly, the maximum microwave attenuation of 38.1 dB at 18 GHz (J band) was achieved in NR4 composite. This high microwave shielding flexible composite material could be used as EMI filter and electromagnetic absorber in antennae applications where EMI need to be lesser.