Irina Sizova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Irina Sizova has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Markus Bambach
Advanced Manufacturing Lab, ETH Zurich, Zurich, Switzerland
16 shared publications - Sabine Weiß
Department of Physical Metallurgy and Materials Technology, Brandenburg University of Technology Cottbus-Senftenberg, 03046 Cottbus, Germany
3 shared publications Alexander Sviridov
Chair of Mechanical Design and Manufacturing, Brandenburg University of Technology Cottbus – Senftenberg, Konrad – Wachsmann – Allee 17, Cottbus D-03046, Germany
2 shared publicationsAliakbar Emdadi
2 shared publications- Aliakbar Emdadi
Chair of Physical Metallurgy and Materials Technology, Brandenburg University of Technology Cottbus-Senftenberg, Konrad-Wachsmann-Allee 17, 03046 Cottbus, Germany
2 shared publications - Sebastian Bolz
Chair of Physical Metallurgy and Materials Technology, Brandenburg Technical University, 03046 Cottbus, Germany
2 shared publications
Latest Publications
- Open Access
- 29 July 2024
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 8 (4) , 162
Production of Ceramic Investment Casting Shells Using Lithography-Based Ceramic Manufacturing and Binder Jetting Technology
This paper presents a comprehensive analysis of the utilization of 3D printing technology for the fabrication of ceramic shells in the context of investment casting. This study encompasses an exploration of various 3D printing techniques such as binder jetting technology and lithography-based ceramic manufacturing applied to ceramic materials tailored for investment casting applications for different materials. Comparative analyses between conventionally manufactured shells and those produced through 3D printing techniques are presented, shedding light on the potential advantages and challenges associated with the adoption of additive manufacturing in investment casting processes. The findings of this study reveal that both methods offer viable solutions for creating ceramic materials suitable as shells for investment casting. Both lithography-based ceramic manufacturing and binder jetting technology exhibit unique advantages and challenges. Lithography-based ceramic manufacturing demonstrates a superior surface finish and resolution, making it particularly suitable for intricate designs and fine details. On the other hand, binder jetting technology presents advantages in terms of speed and scalability, allowing for the rapid production of larger components.
- 29 July 2024
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 8 (4) , 162
Open AccessProduction of Ceramic Investment Casting Shells Using Lithography-Based Ceramic Manufacturing and Binder Jetting Technology
This paper presents a comprehensive analysis of the utilization of 3D printing technology for the fabrication of ceramic shells in the context of investment casting. This study encompasses an exploration of various 3D printing techniques such as binder jetting technology and lithography-based ceramic manufacturing applied to ceramic materials tailored for investment casting applications for different materials. Comparative analyses between conventionally manufactured shells and those produced through 3D printing techniques are presented, shedding light on the potential advantages and challenges associated with the adoption of additive manufacturing in investment casting processes. The findings of this study reveal that both methods offer viable solutions for creating ceramic materials suitable as shells for investment casting. Both lithography-based ceramic manufacturing and binder jetting technology exhibit unique advantages and challenges. Lithography-based ceramic manufacturing demonstrates a superior surface finish and resolution, making it particularly suitable for intricate designs and fine details. On the other hand, binder jetting technology presents advantages in terms of speed and scalability, allowing for the rapid production of larger components.
- Open Access
Microstructures and Mechanical Properties of Hybrid, Additively Manufactured Ti6Al4V after Thermomechanical Processing
In the present study, we propose a hybrid manufacturing route to produce high-quality Ti6Al4V parts, combining additive powder laser directed energy deposition (L-DED) for manufacturing of preforms, with subsequent hot forging as a thermomechanical processing (TMP) step. After L-DED, the material was hot formed at two different temperatures (930 °C and 1070 °C) and subsequently heat-treated for stress relief annealing. Tensile tests were performed on small sub-samples, taking into account different sample orientations with respect to the L-DED build direction and resulting in very good tensile strengths and ductility properties, similar or superior to the forged material. The resulting microstructure consists of very fine grained, partially globularized alpha grains, with a mean diameter ~0.8–2.3 µm, within a beta phase matrix, constituting between 2 and 9% of the sample. After forging in the sub-beta transus temperature range, the typical L-DED microstructure was no longer discernible and the anisotropy in tensile properties, common in additive manufacturing (AM), was significantly reduced. However, forging in the super-beta transus temperature range resulted in remaining anisotropies in the mechanical properties as well as an inferior tensile strength and ductility of the material. It was shown, that by combining L-DED with thermomechanical processing in the sub-beta transus temperature range of Ti6Al4V, a suitable microstructure and desirable mechanical properties for many applications can be obtained, with the advantage of reducing the material waste.
Open AccessMicrostructures and Mechanical Properties of Hybrid, Additively Manufactured Ti6Al4V after Thermomechanical Processing
In the present study, we propose a hybrid manufacturing route to produce high-quality Ti6Al4V parts, combining additive powder laser directed energy deposition (L-DED) for manufacturing of preforms, with subsequent hot forging as a thermomechanical processing (TMP) step. After L-DED, the material was hot formed at two different temperatures (930 °C and 1070 °C) and subsequently heat-treated for stress relief annealing. Tensile tests were performed on small sub-samples, taking into account different sample orientations with respect to the L-DED build direction and resulting in very good tensile strengths and ductility properties, similar or superior to the forged material. The resulting microstructure consists of very fine grained, partially globularized alpha grains, with a mean diameter ~0.8–2.3 µm, within a beta phase matrix, constituting between 2 and 9% of the sample. After forging in the sub-beta transus temperature range, the typical L-DED microstructure was no longer discernible and the anisotropy in tensile properties, common in additive manufacturing (AM), was significantly reduced. However, forging in the super-beta transus temperature range resulted in remaining anisotropies in the mechanical properties as well as an inferior tensile strength and ductility of the material. It was shown, that by combining L-DED with thermomechanical processing in the sub-beta transus temperature range of Ti6Al4V, a suitable microstructure and desirable mechanical properties for many applications can be obtained, with the advantage of reducing the material waste.
- 1 February 2021
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 288
On the hot deformation behavior of Ti-6Al-4V made by additive manufacturing
- 1 February 2021
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 288
On the hot deformation behavior of Ti-6Al-4V made by additive manufacturing
- Top Cited Papers
- 1 August 2020
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 282
Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing
- 1 August 2020
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 282
Top Cited PapersHybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing
- Open Access
Residual Stress and Microstructure of a Ti-6Al-4V Wire Arc Additive Manufacturing Hybrid Demonstrator
Wire Arc Additive Manufacturing (WAAM) features high deposition rates and, thus, allows production of large components that are relevant for aerospace applications. However, a lot of aerospace parts are currently produced by forging or machining alone to ensure fast production and to obtain good mechanical properties; the use of these conventional process routes causes high tooling and material costs. A hybrid approach (a combination of forging and WAAM) allows making production more efficient. In this fashion, further structural or functional features can be built in any direction without using additional tools for every part. By using a combination of forging basic geometries with one tool set and adding the functional features by means of WAAM, the tool costs and material waste can be reduced compared to either completely forged or machined parts. One of the factors influencing the structural integrity of additively manufactured parts are (high) residual stresses, generated during the build process. In this study, the triaxial residual stress profiles in a hybrid WAAM part are reported, as determined by neutron diffraction. The analysis is complemented by microstructural investigations, showing a gradient of microstructure (shape and size of grains) along the part height. The highest residual stresses were found in the transition zone (between WAAM and forged part). The total stress range showed to be lower than expected for WAAM components. This could be explained by the thermal history of the component.
Open AccessResidual Stress and Microstructure of a Ti-6Al-4V Wire Arc Additive Manufacturing Hybrid Demonstrator
Wire Arc Additive Manufacturing (WAAM) features high deposition rates and, thus, allows production of large components that are relevant for aerospace applications. However, a lot of aerospace parts are currently produced by forging or machining alone to ensure fast production and to obtain good mechanical properties; the use of these conventional process routes causes high tooling and material costs. A hybrid approach (a combination of forging and WAAM) allows making production more efficient. In this fashion, further structural or functional features can be built in any direction without using additional tools for every part. By using a combination of forging basic geometries with one tool set and adding the functional features by means of WAAM, the tool costs and material waste can be reduced compared to either completely forged or machined parts. One of the factors influencing the structural integrity of additively manufactured parts are (high) residual stresses, generated during the build process. In this study, the triaxial residual stress profiles in a hybrid WAAM part are reported, as determined by neutron diffraction. The analysis is complemented by microstructural investigations, showing a gradient of microstructure (shape and size of grains) along the part height. The highest residual stresses were found in the transition zone (between WAAM and forged part). The total stress range showed to be lower than expected for WAAM components. This could be explained by the thermal history of the component.
- Open Access
Applying Machine Learning to the Phenomenological Flow Stress Modeling of TNM-B1
Data-driven or machine learning approaches are increasingly being used in material science and research. Specifically, machine learning has been implemented in the fields of materials discovery, prediction of phase diagrams and material modelling. In this work, the application of machine learning to the traditional phenomenological flow stress modelling of the titanium aluminide (TiAl) alloy TNM-B1 (Ti-43.5Al-4Nb-1Mo-0.1B) is investigated. Three model types were developed, analyzed and compared; a physics-based phenomenological model (PM) originally developed for steel by Cingara and McQueen, a purely data-driven machine learning model (MLM), and a hybrid model (HM), which uses characteristic points predicted by a learning algorithm as input for the phenomenological model. The same amount of data was used to both fit the PM and train the MLM and HM. The models were analyzed and compared based on the accuracy of their predictions, development and computing time, and their ability to predict on interpolated and extrapolated inputs. The results revealed that for the same amount of experimental data, the MLM was more accurate than the PM. In addition, the MLM was better able to capture the characteristic peak stress in the TNM-B1 the flow curves, and could be developed and computed faster. Furthermore, the MLM was able to make realistic predictions for inputs outside the experimental data used for training. The HM showed comparable accuracy to the PM for the experimental conditions. However, the HM was able to produce a better fit for input conditions outside the training data.
Open AccessApplying Machine Learning to the Phenomenological Flow Stress Modeling of TNM-B1
Data-driven or machine learning approaches are increasingly being used in material science and research. Specifically, machine learning has been implemented in the fields of materials discovery, prediction of phase diagrams and material modelling. In this work, the application of machine learning to the traditional phenomenological flow stress modelling of the titanium aluminide (TiAl) alloy TNM-B1 (Ti-43.5Al-4Nb-1Mo-0.1B) is investigated. Three model types were developed, analyzed and compared; a physics-based phenomenological model (PM) originally developed for steel by Cingara and McQueen, a purely data-driven machine learning model (MLM), and a hybrid model (HM), which uses characteristic points predicted by a learning algorithm as input for the phenomenological model. The same amount of data was used to both fit the PM and train the MLM and HM. The models were analyzed and compared based on the accuracy of their predictions, development and computing time, and their ability to predict on interpolated and extrapolated inputs. The results revealed that for the same amount of experimental data, the MLM was more accurate than the PM. In addition, the MLM was better able to capture the characteristic peak stress in the TNM-B1 the flow curves, and could be developed and computed faster. Furthermore, the MLM was able to make realistic predictions for inputs outside the experimental data used for training. The HM showed comparable accuracy to the PM for the experimental conditions. However, the HM was able to produce a better fit for input conditions outside the training data.
- 1 January 2019
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 37, 150-158
Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting
- 1 January 2019
- Published by Elsevier in Journal of Manufacturing Processes
- Vol. 37, 150-158
Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting
- Open Access
- 1 November 2018
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 885, 56-63
Towards Damage Controlled Hot Forming
Metal forming processes may induce internal damage in the form of voids in the workpiece under unfavorable deformation conditions. Controlling the amount of damage induced by metal forming operations may increase service performance of the produced parts. Damage is crucial in high-performance components of limited workability such as jet engine turbine blades. Recent developments have introduced forged titanium aluminides into commercial jet engines. Titanium aluminides are lightweight intermetallic compounds with excellent creep properties but very limited ductility. Their low workability requires isothermal forging at slow strain rates, which is typically kept constant in the process. This work explores the possibility of increasing the ram speed during the process so that the process time is reduced while the amount of damage introduced into the workpiece is controlled. The results show that a 25% reduction in process time seems viable without increase in damage by solving an optimal control problem, in which the ram speed profile is determined off-line by minimization.
- 1 November 2018
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 885, 56-63
Open AccessTowards Damage Controlled Hot Forming
Metal forming processes may induce internal damage in the form of voids in the workpiece under unfavorable deformation conditions. Controlling the amount of damage induced by metal forming operations may increase service performance of the produced parts. Damage is crucial in high-performance components of limited workability such as jet engine turbine blades. Recent developments have introduced forged titanium aluminides into commercial jet engines. Titanium aluminides are lightweight intermetallic compounds with excellent creep properties but very limited ductility. Their low workability requires isothermal forging at slow strain rates, which is typically kept constant in the process. This work explores the possibility of increasing the ram speed during the process so that the process time is reduced while the amount of damage introduced into the workpiece is controlled. The results show that a 25% reduction in process time seems viable without increase in damage by solving an optimal control problem, in which the ram speed profile is determined off-line by minimization.
- 1 October 2018
- Published by Elsevier in Intermetallics
- Vol. 101, 44-55
Isothermal forging of titanium aluminides without beta-phase — Using non-equilibrium phases produced by spark plasma sintering for improved hot working behavior
- 1 October 2018
- Published by Elsevier in Intermetallics
- Vol. 101, 44-55
Isothermal forging of titanium aluminides without beta-phase — Using non-equilibrium phases produced by spark plasma sintering for improved hot working behavior
- 1 June 2018
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 256, 154-159
Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing
- 1 June 2018
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 256, 154-159
Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing