CACarlos Alcaide

Carlos Alcaide

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carlos Alcaide has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Accurate Multipactor Analysis of Passive Bandpass Waveguide Filters Under Modulated Signal Excitation

    by Miguel Rodríguez Jodar, Raúl Cervera-Marín, Carlos Alcaide Guillén, Pablo Soto, Òscar Monerris, Javier Ossorio, Rafael Mata, José V. Morro, John Petit, Vicente E. Boria, et al.

    Multipactor is a key effect in satellite communication hardware, which can ultimately limit their power-handling capability and the overall system performance. For this reason, the industry is interested in predicting the multipactor power threshold during the design phase of on-board payloads. Although the techniques for computing this threshold for continuous-wave (CW) excitation are nowadays mature, its determination under modulated signal operation is still a complex task. For narrowband passive devices, the problem is even more intricate as the frequency dependence of the component response must also be taken into account. To address this scenario, the so-called sliced-spectrum multipactor analysis (SSMA) method is proposed in this article. This technique operates by segmenting the spectrum of the modulated signal into multiple spectral slices and then representing the signal as the sum of different carriers modulated by each of the segmented slices. This operation scheme enables the use of each spectral slice of the steady-state electromagnetic (EM) fields at its corresponding carrier frequency. As a result, an accurate and efficient multipactor analysis technique is developed. This new approach is rigorously validated using bandpass waveguide filter samples, allowing us to benchmark the multipactor power thresholds predicted by the SSMA technique against those provided by measurements and available state-of-the-art codes.

  • Open Access

    Advanced Wideband Stepped Impedance Filters With Dielectric-Filled Resonant Apertures

    by David Rubio, Carlos Alcaide, Santiago Cogollos, Vicente E. Boria, Marco Guglielmi

    This article describes a novel compact wideband filter topology in rectangular waveguide technology based on the combined use of stepped impedance resonators (SIRs), and resonant apertures (RAs) which are filled with dielectric (Teflon). The Teflon-filled RAs increase the selectivity without enlarging the structure of the filter and improve the robustness against adverse high-power effects, such as multipactor. A comprehensive characterization of the electrical properties of Teflon is also carried out. For illustrative purposes, two nine-pole filter prototypes have been designed, fabricated, and measured. One of the two filters has the RAs filled with Teflon. Measurements of the two prototypes show an excellent agreement with full-wave simulations. Furthermore, the multipactor power threshold has been evaluated for both filters. The results obtained show that using Teflon in the RAs produces a very significant improvement in maximum power level, thereby fully validating both the structures and the design procedure described in this paper.

  • Open Access

    Secondary electron emission yield of Teflon®, Kapton®, RT/Duroid® and ferrite under induced surface charging states

    by L Esteve, R Mata, O Monerris, C Alcaide, C Miquel, V E Boria

    Dielectric materials are increasingly common in modern satellite payloads due to their advantageous properties, such as the large mass and volume reduction can be achieved when they are used in radiofrequency (RF) equipment. However, the presence of dielectric materials in the output high-power section of RF payloads requires careful study of their influence on the multipactor performance, and therefore, their secondary electron emission yield (SEY). This characterization in dielectrics is nowadays a challenging and time-consuming practice relying on the electrical charge neutralization before each measurement. However, surface charging of dielectrics can be developed during the satellite operation and can significantly influence their SEY properties, thereby affecting the multipactor threshold. For the first time, this study succeeds in providing the experimental SEY curves of Teflon®, Kapton®, Rogers RT/Duroid®, and Ferrite under controlled and induced surface charging states. These materials were studied due to their common employment in satellite communication devices. Using an electron gun working in combination with a Kelvin probe system, it was possible to characterize the SEY characteristics of the materials after inducing different charge levels on their surface. From the results, it can be concluded that surface charging has a significant effect in lowering the SEY levels. Nevertheless, this effect could only be observed in materials with high electrical resistivity, since the surface charge rapidly dissipated in materials with lower electrical resistivity before the SEY measurement took place. Therefore, these findings provide valuable insights into the design and optimization of dielectric materials for space applications, giving an accurate overview of their SEY response under possible charging states in orbit.


  • Open Access

    Impact of Distortion on the Multipactor Threshold for Dual Carrier Digitally Modulated Signals

    by Raúl Cervera-Marín, Laura Esteve, Vladyslav Vorotynskyy, Carlos Alcaide-Guillén, Miguel Rodríguez Jodar, Òscar Monerris, Pablo Soto, Javier Ossorio, Davide Smacchia, Vicente E. Boria, et al.

    Multipactor under digitally modulated signals is a field of growing interest in the space industry. The need to operate with higher powers arises from the industry demand to increase data throughput, enabled by advances in space-born amplifiers. However, this often leads to signal distortion, which may alter the multipactor threshold measured in laboratory conditions. This work aims to characterize, through the combination of experimental tests and numerical simulations, how distortion affects the multipactor performance of microwave devices excited by modulated signals. To this end, several dual carrier modulated signals with different distortion levels are digitally created, simulated, and tested on the same multipactor sample. When the simulation configuration matches the laboratory conditions, an excellent degree of accuracy is reported. However, simulations also demonstrate that the nonzero time response of the sensors may play a crucial role in determining the measured threshold, suggesting that laboratory detectors may struggle to detect short-lived events. Numerical predictions also reveal how the thresholds linked to these events are affected by the degree of signal distortion.

  • Open Access

    A Fast and Accurate Coarse Method for Multipactor Threshold Prediction of RF Filters Under Modulated Signal Excitation

    by Carlos Alcaide Guillén, Miguel Rodríguez Jódar, Raúl Cervera Marín, Jose V. Morro, Pablo Soto, Òscar Monerris, Javier Ossorio, Rafael Mata, Davide Smacchia, Vicente E. Boria, et al.

    Multipactor is a key high-power effect limiting the system performance for onboard satellite hardware. Although modern particle simulators admit arbitrary geometries and signals as inputs, their practical use is often limited to continuous-wave (CW) excitations. Unfortunately, the multipactor analysis for input-modulated signals normally leads to prohibitively large CPU times, as signal lengths are very large compared to the electron population’s evolution time. The Coarse Method is an elegant way of overcoming this limitation, providing a good estimate of the multipactor threshold in reduced CPU times. However, if the input signal is not preprocessed before being analyzed, the method is unable to account for the frequency dependence as it operates with electron dynamics information extracted at a single frequency, leading to biased predictions for narrowband samples as filters. This article proposes an extension to the original Coarse Method implementation by considering the sample response and the modulated signal spectral distribution to account for the frequency dependence. The resulting method is suitable for estimating the multipactor threshold of narrowband samples excited by modulated signals, while keeping the benefits in terms of simplicity, efficiency, and generality of the Coarse Method. The proposed approach is benchmarked against laboratory measurement results, as well as particle simulators and legacy Coarse Method predictions, revealing the advantages of the novel technique and its range of applications.


  • Open Access

    Multipactor Breakdown Threshold Estimation Based on Circuital Models and Particle Simulations for Multicarrier Signals in RF Filters

    by Miguel Rodríguez, Raúl Cervera, Carlos Alcaide, Pablo González, Pablo Soto, José V. Morro, Vicente E. Boria, César Miquel España, David Raboso

    Multipactor is a harmful effect that may challenge the correct operation of satellite communication systems by limiting the system power-handling capability, and hence its overall performance. Therefore, the development of techniques for predicting the multipactor threshold is of great practical interest. For narrowband components, rough estimations can be obtained from experimental charts, normally resulting in conservative thresholds. More accurate predictions can be obtained with particle simulators, at the expense of a much higher computational effort. This study proposes an approach based on circuital models for swift and accurate multipactor threshold predictions, specifically addressing short-term discharges induced by multicarrier signals in narrowband samples. The use of reduced, but representative, electromagnetic (EM) models of the critical gap region is discussed in detail. Through the use of these models, it is possible to avoid simulating the complete structure, increasing the computational efficiency and enabling the fulfillment of the power requirements at early design stages. The proposed technique is validated through commercial particle simulators, showcasing its efficacy, efficiency, and key benefits.


  • Practical Determination of Passive Intermodulation From Modulated Signals in Satellite Applications

    by Davide Smacchia, Mónica Martínez-Mendoza, Carlos Alcaide, Pablo Soto, Vicente E. Boria, David Raboso

    Passive intermodulation (PIM) measurements are typically conducted with a simplified test scenario composed of two radio frequency (RF) carrier tones operating in continuous wave (CW). However, satellite payloads tend to operate with a more complex scheme, where modulated signals are present at each transmission channel. This article aims at linking both PIM scenarios. A novel procedure is developed to obtain, from measured data obtained using two CW input tones, the spectral distribution and amplitude of a PIM contribution originated after exciting a nonlinear device with modulated signals. The technique determines the spectral distribution of the PIM term of interest from the spectrum of the input signals, and evaluates its amplitude from a recently formulated PIM power conservation rule. Moreover, an extensive PIM test campaign providing novel and valuable experimental data for the topic of PIM under modulated signal excitation has been carried out. The results obtained for a wide range of test scenarios exhibit a good agreement with theoretical predictions, thus providing a practical validation of the proposed technique.


  • Open Access

    A Genetically Based Algorithm to Improve Execution Speed in Multipactor Simulations in Parallel-Plate Waveguides

    by Raúl Cervera-Marín, Miguel Rodríguez Jodar, Carlos Alcaide Guillén, Pablo Soto, José V. Morro, Vicente Boria, César Miquel España, David Raboso

    This article presents an approach to enhance the convergence speed of Monte Carlo simulations for multipactor phenomena in parallel-plate geometries. Multipactor, a self-sustained electron discharge, may cause significantly harmful effects in electronic device operation. An adaptive genetic modification method is introduced to explore the parameter space of electron trajectories efficiently, leading to rapid identification of the critical combinations that induce population growth or decay. The proposed approach involves modifying key parameters, such as the initial phases and kinetic energies of individual particles, based on their performance in multipactor simulations. The reported results demonstrate a substantial improvement in convergence speed, achieving accurate results with fewer tracked particles. The adaptive genetic modification proves to be a promising technique for fast multipactor threshold predictions in parallel-plate configurations and has potential applications when analyzing electron-induced phenomena in a wide range of electronic systems.


  • A New Reference Sample for High-Frequency Multipactor Testing

    by Pablo González, Davide Smacchia, Carlos Alcaide, Pablo Soto, Ana Rodríguez, Jose Vicenté Morro, Rafael Mata, Vicente E. Boria

    Multipactor (MP) is a high-power effect severely limiting the performance of satellite communication links. A reference sample is normally used in the experimental setups for MP testing in order to verify its correct operation. However, the low gaps required for high frequencies jeopardize the manufacturability of the devices traditionally used for this purpose. A new reference sample, based on a stepped-impedance resonator (SIR), is proposed in this letter. The key design considerations are also outlined. A prototype operating between 17 and 18 GHz has been manufactured and tested, proving the novel structure allows higher gaps, and is, thus, suitable for higher frequency bands.


  • Open Access

    Multipactor Threshold Estimation Techniques Based on Circuit Models, Electromagnetic Fields, and Particle Simulators

    by Pablo González, Carlos Alcaide, Raúl Cervera, Miguel Rodríguez, Óscar Monerris, John Petit, Ana Rodríguez, Ana Vidal, Joaquín Vague, José V. Morro, et al.

    Multipactor has become a keylimiting factor of the final performance of satellite communication systems, due to the increase in power levels and/or operating frequency bands. As a result, the critical components of these systems must meet demanding multipactor specifications which should be considered during the design process. This paper describes the different techniques available to predict the multipactor threshold power for radio frequency (RF) and microwave passive hardware under continuous wave (CW) excitation, from cumbersome particle simulations to fast approximate methods based on circuit models. All these techniques have been described and compared together for the first time, including also a detailed description of the configuration issues of commercial particle simulators required to obtain accurate multipactor threshold predictions. The techniques are applied to both wideband and narrowband application examples. The predictions have been compared with measured thresholds of manufactured samples obtained with a novel multipactor test bed, thus allowing to highlight the advantages and limitations of each technique and particle simulator. From this paper, it will be possible to choose the most suitable procedure (and an appropriate simulator, if needed) to obtain multipactor threshold prediction of passive hardware.