Marshall Sheerene Sheldon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Marshall Sheerene Sheldon has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Seteno Karabo Obed Ntwampe
Department of Chemical Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban, South Africa
7 shared publications - Debbie De Jager
Department of Chemical Engineering, Cape Peninsula University of Technology, P.O. Box 1906, Bellville 7535, South Africa
6 shared publications W. Edwards
5 shared publications- Buntu Godongwana
Department of Chemical Engineering, Cape Peninsula University of Technology, P.O. Box 652, Cape Town 8000, South Africa
3 shared publications - Estella Zandile Jingxi
Department of Chemical Engineering, Cape Peninsula University of Technology, P.O. Box 1906, Bellville 7535, South Africa
2 shared publications - Heinrich Volschenk
Department of Microbiology, Stellenbosch University, Stellenbosch, South Africa
2 shared publications
Latest Publications
- Open Access
Systematic Review of Poultry Slaughterhouse Wastewater Treatment: Unveiling the Potential of Nanobubble Technology
Aeration is crucial for the biological decomposition of organic compounds in wastewater treatment. However, it is a highly energy-intensive process in traditional activated sludge systems, accounting for 50% to 75% of a plant’s electricity consumption and making it a major cost driver for wastewater treatment plants. Nanobubbles (NBs), characterized by their tiny size with diameters less than 200 nm, have emerged as a potential alternative to the low efficiency of aeration and high sludge production in aeration systems. NBs proved effective in removing COD and other pollutants from wastewater. For example, when applied in flotation, aeration, and advanced oxidation, NBs achieved up to 95%, 85%, and 92.5% COD removal, respectively. Considering the recent advancements in wastewater treatment, a compelling need arises for a thorough investigation of the effectiveness and mechanisms of nanobubbles in this field. This systematic review summarizes recent advancements in understanding nanobubbles (NBs) and their unique properties that enhance physical, chemical, and biological water and wastewater treatment processes. Moreover, this study reviews various methods for generating NBs and provides an in-depth review of their applications in wastewater treatment, with a particular focus on poultry slaughterhouse wastewater (PSW) treatment.
Open AccessSystematic Review of Poultry Slaughterhouse Wastewater Treatment: Unveiling the Potential of Nanobubble Technology
Aeration is crucial for the biological decomposition of organic compounds in wastewater treatment. However, it is a highly energy-intensive process in traditional activated sludge systems, accounting for 50% to 75% of a plant’s electricity consumption and making it a major cost driver for wastewater treatment plants. Nanobubbles (NBs), characterized by their tiny size with diameters less than 200 nm, have emerged as a potential alternative to the low efficiency of aeration and high sludge production in aeration systems. NBs proved effective in removing COD and other pollutants from wastewater. For example, when applied in flotation, aeration, and advanced oxidation, NBs achieved up to 95%, 85%, and 92.5% COD removal, respectively. Considering the recent advancements in wastewater treatment, a compelling need arises for a thorough investigation of the effectiveness and mechanisms of nanobubbles in this field. This systematic review summarizes recent advancements in understanding nanobubbles (NBs) and their unique properties that enhance physical, chemical, and biological water and wastewater treatment processes. Moreover, this study reviews various methods for generating NBs and provides an in-depth review of their applications in wastewater treatment, with a particular focus on poultry slaughterhouse wastewater (PSW) treatment.
- Open Access
- 15 September 2019
- Published by IWA Publishing in Water Science & Technology
- Vol. 80 (6) , 1053-1062
Forward osmosis: dyeing draw solutions for water reclamation from feed water resources
Reactive Black 5 and Basic Blue 41 GRL dyeing solutions (dye-to-salt mixture in a 1:10 dye-to-salt mass ratio) were investigated as draw solutions (DS) in a forward osmosis (FO) system with a biomimetic membrane. Synthetic seawater (SSW) and textile wastewater (TWW1 and TWW2) were evaluated as feed solutions (FS) for water reclamation. Reactive Black 5 and Basic Blue 41 GRL were diluted from 0.02 M to concentrations of 0.002 and 0.004 M, respectively. With Reactive Black 5 as DS and SSW as FS, an initial flux of 20.24 L/m2 h and water recovery of 75% was achieved. Using TWW1 and TWW2 initial water fluxes of 19.51 and 13.43 L/m2 h were achieved, respectively, with a 30% water recovery. Using Basic Blue 41 GRL initial water fluxes of 18.72, 15.13 and 13.42 L/m2 h were achieved with SSW, TWW1, and TWW2 as FS with water recoveries of 50, 20 and 20%, respectively. The average reverse solute fluxes for Reactive Black 5 and Basic Blue 41 GRL were 0.06 to 0.34 g/m2 h, respectively. Diluted dyeing solutions were produced, with simultaneous water reclamation from SSW and TWW resulting in similar or higher water fluxes and lower reverse solute fluxes compared to other commercially available membranes.
- 15 September 2019
- Published by IWA Publishing in Water Science & Technology
- Vol. 80 (6) , 1053-1062
Open AccessForward osmosis: dyeing draw solutions for water reclamation from feed water resources
Reactive Black 5 and Basic Blue 41 GRL dyeing solutions (dye-to-salt mixture in a 1:10 dye-to-salt mass ratio) were investigated as draw solutions (DS) in a forward osmosis (FO) system with a biomimetic membrane. Synthetic seawater (SSW) and textile wastewater (TWW1 and TWW2) were evaluated as feed solutions (FS) for water reclamation. Reactive Black 5 and Basic Blue 41 GRL were diluted from 0.02 M to concentrations of 0.002 and 0.004 M, respectively. With Reactive Black 5 as DS and SSW as FS, an initial flux of 20.24 L/m2 h and water recovery of 75% was achieved. Using TWW1 and TWW2 initial water fluxes of 19.51 and 13.43 L/m2 h were achieved, respectively, with a 30% water recovery. Using Basic Blue 41 GRL initial water fluxes of 18.72, 15.13 and 13.42 L/m2 h were achieved with SSW, TWW1, and TWW2 as FS with water recoveries of 50, 20 and 20%, respectively. The average reverse solute fluxes for Reactive Black 5 and Basic Blue 41 GRL were 0.06 to 0.34 g/m2 h, respectively. Diluted dyeing solutions were produced, with simultaneous water reclamation from SSW and TWW resulting in similar or higher water fluxes and lower reverse solute fluxes compared to other commercially available membranes.
- Open Access
- 1 April 2019
- Published by Elsevier in Desalination
- Vol. 456, 64-73
Performance and energy consumption evaluation of a fertiliser drawn forward osmosis (FDFO) system for water recovery from brackish water
- 1 April 2019
- Published by Elsevier in Desalination
- Vol. 456, 64-73
Open AccessPerformance and energy consumption evaluation of a fertiliser drawn forward osmosis (FDFO) system for water recovery from brackish water
- Open Access
- 25 April 2018
- Published by Academy of Science of South Africa in Water SA
- Vol. 44 (2 April) , 258-268-268
Potential of dyes as draw solutions in forward osmosis for the South African textile industry
The textile industry produces large volumes of wastewater that requires appropriate treatment before being released into the environment. Research globally has focused on advanced desalination technologies to augment the limited freshwater resources. Forward osmosis (FO) technology has gained substantial interest as a possible lower-energy desalination technology. However, challenges such as the availability of effective draw solutions (DS) have limited its implementation. This study evaluated alternative feed water resources and assessed the potential of dye solutions as DS. The aim is to dilute a concentrated dye DS to a target concentration for direct dye-batch use, thereby reclaiming water resources. The measured osmotic pressure (OP) of the alternative feed solutions (synthetic brackish water; syntethic seawater; seawater from the Atlantic and Indian Oceans; and wastewater from two textile factories) were 414, 2 761, 2 580, 2 614; 1 716 and 7 822 kPa, respectively. Three basic dyes (Maxilon Turquoise, Red and Blue) and three reactive dyes (Carmine, Olive Green and Black) were selected based on common use in the South African textile industry. The dye samples were prepared without and with salt at different concentrations and different dye-to-salt mass ratios ranging from 1:10 to 1:60. The OP trends for the basic dyes followed Blue >> Red > Turquoise and for the reactive dyes Black >> Olive > Carmine. The overall OP trend was Black > Olive > Carmine > Blue > Red > Turquoise. The OP at different dye concentrations and different dye-to-salt ratios was mostly influenced by the dye chemistry and molecular weight (Mw) rather than the type of dye, i.e., reactive vs basic.The OP trend for the dye-to-salt ratios was 1:60 > 1:50 > 1:40 > 1:30 > 1:20 > 1:10. For both the basic and reactive dyes a linear relationship exists between OP and dye concentration; as well as between OP and Mw. The dye DS exhibited larger OP compared to that of the FS evaluated, thus rendering them suitable DS. Keywords: draw solution; dyes; feed solution; forward osmosis; osmotic pressure; textile industry; textile wastewater
- 25 April 2018
- Published by Academy of Science of South Africa in Water SA
- Vol. 44 (2 April) , 258-268-268
Open AccessPotential of dyes as draw solutions in forward osmosis for the South African textile industry
The textile industry produces large volumes of wastewater that requires appropriate treatment before being released into the environment. Research globally has focused on advanced desalination technologies to augment the limited freshwater resources. Forward osmosis (FO) technology has gained substantial interest as a possible lower-energy desalination technology. However, challenges such as the availability of effective draw solutions (DS) have limited its implementation. This study evaluated alternative feed water resources and assessed the potential of dye solutions as DS. The aim is to dilute a concentrated dye DS to a target concentration for direct dye-batch use, thereby reclaiming water resources. The measured osmotic pressure (OP) of the alternative feed solutions (synthetic brackish water; syntethic seawater; seawater from the Atlantic and Indian Oceans; and wastewater from two textile factories) were 414, 2 761, 2 580, 2 614; 1 716 and 7 822 kPa, respectively. Three basic dyes (Maxilon Turquoise, Red and Blue) and three reactive dyes (Carmine, Olive Green and Black) were selected based on common use in the South African textile industry. The dye samples were prepared without and with salt at different concentrations and different dye-to-salt mass ratios ranging from 1:10 to 1:60. The OP trends for the basic dyes followed Blue >> Red > Turquoise and for the reactive dyes Black >> Olive > Carmine. The overall OP trend was Black > Olive > Carmine > Blue > Red > Turquoise. The OP at different dye concentrations and different dye-to-salt ratios was mostly influenced by the dye chemistry and molecular weight (Mw) rather than the type of dye, i.e., reactive vs basic.The OP trend for the dye-to-salt ratios was 1:60 > 1:50 > 1:40 > 1:30 > 1:20 > 1:10. For both the basic and reactive dyes a linear relationship exists between OP and dye concentration; as well as between OP and Mw. The dye DS exhibited larger OP compared to that of the FS evaluated, thus rendering them suitable DS. Keywords: draw solution; dyes; feed solution; forward osmosis; osmotic pressure; textile industry; textile wastewater
- 1 October 2014
- Published by Elsevier in Separation and Purification Technology
- Vol. 135, 135-144
Colour removal from textile wastewater using a pilot-scale dual-stage MBR and subsequent RO system
- 1 October 2014
- Published by Elsevier in Separation and Purification Technology
- Vol. 135, 135-144
Colour removal from textile wastewater using a pilot-scale dual-stage MBR and subsequent RO system
- Open Access
- 1 April 2012
- Published by IWA Publishing in Water Science & Technology
- Vol. 65 (7) , 1265-1272
Treatment of paper mill effluent using an anaerobic/aerobic hybrid side-stream Membrane Bioreactor
This paper presents the design and operational performance data of an anaerobic/aerobic hybrid side-stream Membrane Bioreactor (MBR) process for treating paper mill effluent operated over a 6 month period. The paper mill effluent stream was characterized by a chemical oxygen demand (COD) range of between 1,600 and 4,400 mg/L and an average BOD of 2,400 mg/L. Despite large fluctuations in COD feed concentration, stable process performance was achieved. The anaerobic Expanded Granular Sludge Bed (EGSB) pre-treatment step effectively lowered the organic loading by 65 to 85%, thus lowering the MBR COD feed concentration to consistently below 750 mg/L. The overall MBR COD removal was consistent at an average of 96%, regardless of the effluent COD or changes in the hydraulic retention time (HRT) and organic loading rate (OLR). Combining a high-rate anaerobic pre-treatment EGSB with a Modified Ludzack–Ettinger (MLE) MBR process configuration produced a high quality permeate. Preliminary NF and RO results indicated an overall COD removal of around 97 and 98%, respectively.
- 1 April 2012
- Published by IWA Publishing in Water Science & Technology
- Vol. 65 (7) , 1265-1272
Open AccessTreatment of paper mill effluent using an anaerobic/aerobic hybrid side-stream Membrane Bioreactor
This paper presents the design and operational performance data of an anaerobic/aerobic hybrid side-stream Membrane Bioreactor (MBR) process for treating paper mill effluent operated over a 6 month period. The paper mill effluent stream was characterized by a chemical oxygen demand (COD) range of between 1,600 and 4,400 mg/L and an average BOD of 2,400 mg/L. Despite large fluctuations in COD feed concentration, stable process performance was achieved. The anaerobic Expanded Granular Sludge Bed (EGSB) pre-treatment step effectively lowered the organic loading by 65 to 85%, thus lowering the MBR COD feed concentration to consistently below 750 mg/L. The overall MBR COD removal was consistent at an average of 96%, regardless of the effluent COD or changes in the hydraulic retention time (HRT) and organic loading rate (OLR). Combining a high-rate anaerobic pre-treatment EGSB with a Modified Ludzack–Ettinger (MLE) MBR process configuration produced a high quality permeate. Preliminary NF and RO results indicated an overall COD removal of around 97 and 98%, respectively.
- Open Access
- 1 March 2012
- Published by IWA Publishing in Water Science & Technology
- Vol. 65 (5) , 907-914
Membrane bioreactor application within the treatment of high-strength textile effluent
A pilot-scale dual-stage membrane bioreactor (dsMBR) incorporating two ultra-filtration (UF) side-stream membrane modules was designed, constructed, operated and evaluated on-site for treating high-strength textile effluent. The effluent stream was characterised by a COD range of between 45 to 2,820 mg/L and an average BOD of 192.5 mg/L. The dsMBR achieved an average COD reduction of 75% with a maximum of 97% over the 9 month test period. The COD concentration obtained after dsMBR treatment averaged at 190 mg/L, which was well within the discharge standard. The average reduction in turbidity and TSS were 94% and 19.6%, respectively, during the UF-MBR stage of the system. Subsequent treatment of the UF-permeate with nanofiltration (NF) and reverse osmosis (RO) removed both the residual colour and remaining salt. A consistent reduction in the color of the incoming effluent was evident. The ADMI was reduced from an average of 659 to ∼20, a lower ADMI and colour compared to the potable water. An average conductivity rejection of 91% was achieved with conductivity being reduced from an average of 7,700 to 693 μS/cm and the TDS reduced from an average of 5,700 to 473 mg/L, which facilitated an average TDS rejection of 92%.
- 1 March 2012
- Published by IWA Publishing in Water Science & Technology
- Vol. 65 (5) , 907-914
Open AccessMembrane bioreactor application within the treatment of high-strength textile effluent
A pilot-scale dual-stage membrane bioreactor (dsMBR) incorporating two ultra-filtration (UF) side-stream membrane modules was designed, constructed, operated and evaluated on-site for treating high-strength textile effluent. The effluent stream was characterised by a COD range of between 45 to 2,820 mg/L and an average BOD of 192.5 mg/L. The dsMBR achieved an average COD reduction of 75% with a maximum of 97% over the 9 month test period. The COD concentration obtained after dsMBR treatment averaged at 190 mg/L, which was well within the discharge standard. The average reduction in turbidity and TSS were 94% and 19.6%, respectively, during the UF-MBR stage of the system. Subsequent treatment of the UF-permeate with nanofiltration (NF) and reverse osmosis (RO) removed both the residual colour and remaining salt. A consistent reduction in the color of the incoming effluent was evident. The ADMI was reduced from an average of 659 to ∼20, a lower ADMI and colour compared to the potable water. An average conductivity rejection of 91% was achieved with conductivity being reduced from an average of 7,700 to 693 μS/cm and the TDS reduced from an average of 5,700 to 473 mg/L, which facilitated an average TDS rejection of 92%.
- 29 February 2012
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 30 (2) , 197-211
Lithium 7 Isotope (7Li+) Desorption from a Degraded Amberlite IRN 217 Lithiated Mixed-Bed Ion-Exchange Resin
This study investigated the possibility of desorpting the lithium isotope (7Li+) from the cation part of an Amberlite IRN 217 lithiated mixed-bed resin that had been deemed unsuitable for use as a result of anion degradation and the release of organically bound impurities. The desorption of the isotope from the cation part of the mixed-bed resin was studied using dilute hydrochloric (HCl) and sulphuric acid (H2SO4) solutions. The initial experiments were carried out in a batch reactor in order to determine the best eluent acid concentration to be used in a continuous ion-exchange packed-bed column. The favorable eluant concentration was found to be 1 M HCl and 1 M H2SO4, respectively. In the continuous desorption ion-exchange column, a desorption rate >90% was achieved within 18 bed volumes (BV) of HCl and H2SO4 eluants. The concentration of the released anion and cation leachates in the effluent that had been recovered was also determined. The mathematical model developed and the kinetic parameters used in the model represented the desorption kinetics of the 7Li+ isotope from the cation part of the lithiated resin. The correlation coefficient (R2) between the experimental and the simulated data proved to be 0.99 and 0.94 for 1 M HCl and 1 M H2SO4, respectively. This revealed a sufficient correlation for comparison between the experimental and simulated data.
- 29 February 2012
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 30 (2) , 197-211
Lithium 7 Isotope (7Li+) Desorption from a Degraded Amberlite IRN 217 Lithiated Mixed-Bed Ion-Exchange Resin
This study investigated the possibility of desorpting the lithium isotope (7Li+) from the cation part of an Amberlite IRN 217 lithiated mixed-bed resin that had been deemed unsuitable for use as a result of anion degradation and the release of organically bound impurities. The desorption of the isotope from the cation part of the mixed-bed resin was studied using dilute hydrochloric (HCl) and sulphuric acid (H2SO4) solutions. The initial experiments were carried out in a batch reactor in order to determine the best eluent acid concentration to be used in a continuous ion-exchange packed-bed column. The favorable eluant concentration was found to be 1 M HCl and 1 M H2SO4, respectively. In the continuous desorption ion-exchange column, a desorption rate >90% was achieved within 18 bed volumes (BV) of HCl and H2SO4 eluants. The concentration of the released anion and cation leachates in the effluent that had been recovered was also determined. The mathematical model developed and the kinetic parameters used in the model represented the desorption kinetics of the 7Li+ isotope from the cation part of the lithiated resin. The correlation coefficient (R2) between the experimental and the simulated data proved to be 0.99 and 0.94 for 1 M HCl and 1 M H2SO4, respectively. This revealed a sufficient correlation for comparison between the experimental and simulated data.
- Open Access
- 22 February 2010
- Published by Academic Journals in AFRICAN JOURNAL OF BIOTECHNOLOGY
- Vol. 9 (8) , 1106-1114
Water-immiscible dissolved oxygen carriers in combination with Pluronic F 68 in bioreactors
The supply and availability of dissolved oxygen (DO) in aerobic bioprocesses is often a limiting factor for the scaling up, improvement and general performance of these bioprocesses. The use of different DO carriers, particularly the use of perfluorocarbons as oxygen carriers, is discussed in this review. It also highlights interactions of microbial cultures with the surfactant, Pluronic F 68. Although oxygen carriers have been used extensively in the medical field, this review only focuses on their use in microbial bioprocess used for the production of high-value bioproducts. The use of water-immiscible compounds in combination with Pluronic F 68 in bioprocesses is discussed with the intention of analysing their combined effect where bioreactor and biomass performance is affected by DO limitations, nutrient starvation, high concentrations of trace element ions, oxidative stress and cell death from mechanical stress. Key words: Dissolved oxygen, oxygen carriers, perfluorocarbon, Pluronic F 68, surfactant.
- 22 February 2010
- Published by Academic Journals in AFRICAN JOURNAL OF BIOTECHNOLOGY
- Vol. 9 (8) , 1106-1114
Open AccessWater-immiscible dissolved oxygen carriers in combination with Pluronic F 68 in bioreactors
The supply and availability of dissolved oxygen (DO) in aerobic bioprocesses is often a limiting factor for the scaling up, improvement and general performance of these bioprocesses. The use of different DO carriers, particularly the use of perfluorocarbons as oxygen carriers, is discussed in this review. It also highlights interactions of microbial cultures with the surfactant, Pluronic F 68. Although oxygen carriers have been used extensively in the medical field, this review only focuses on their use in microbial bioprocess used for the production of high-value bioproducts. The use of water-immiscible compounds in combination with Pluronic F 68 in bioprocesses is discussed with the intention of analysing their combined effect where bioreactor and biomass performance is affected by DO limitations, nutrient starvation, high concentrations of trace element ions, oxidative stress and cell death from mechanical stress. Key words: Dissolved oxygen, oxygen carriers, perfluorocarbon, Pluronic F 68, surfactant.
- Open Access
- 1 January 2010
- Published by Hindawi Limited in International Journal of Chemical Engineering
- Vol. 2010, 1-12
A Solution of the Convective-Diffusion Equation for Solute Mass Transfer inside a Capillary Membrane Bioreactor
This paper presents an analytical model of substrate mass transfer through the lumen of a membrane bioreactor. The model is a solution of the convective-diffusion equation in two dimensions using a regular perturbation technique. The analysis accounts for radial-convective flow as well as axial diffusion of the substrate specie. The model is applicable to the different modes of operation of membrane bioreactor (MBR) systems (e.g., dead-end, open-shell, or closed-shell mode), as well as the vertical or horizontal orientation. The first-order limit of the Michaelis-Menten equation for substrate consumption was used to test the developed model against available analytical results. The results obtained from the application of this model, along with a biofilm growth kinetic model, will be useful in the derivation of an efficiency expression for enzyme production in an MBR.
- 1 January 2010
- Published by Hindawi Limited in International Journal of Chemical Engineering
- Vol. 2010, 1-12
Open AccessA Solution of the Convective-Diffusion Equation for Solute Mass Transfer inside a Capillary Membrane Bioreactor
This paper presents an analytical model of substrate mass transfer through the lumen of a membrane bioreactor. The model is a solution of the convective-diffusion equation in two dimensions using a regular perturbation technique. The analysis accounts for radial-convective flow as well as axial diffusion of the substrate specie. The model is applicable to the different modes of operation of membrane bioreactor (MBR) systems (e.g., dead-end, open-shell, or closed-shell mode), as well as the vertical or horizontal orientation. The first-order limit of the Michaelis-Menten equation for substrate consumption was used to test the developed model against available analytical results. The results obtained from the application of this model, along with a biofilm growth kinetic model, will be useful in the derivation of an efficiency expression for enzyme production in an MBR.